Balloons are perhaps the most common decoration used to decorate banquet halls and apartments for the holidays. Meanwhile, luminous inflatable balloons began to be used relatively recently.
Children will especially appreciate this type of decor. Multi-colored glowing balls look really magical and attractive. If they are also filled with helium, they will be located near the ceiling, creating a fabulous effect.
If you decide to decorate the premises yourself using flying glowing balls, it is recommended to have the following:
- helium balloon;
- button batteries CR2032 (3 V);
- bright LEDs (white light);
- tape or tape.
There is nothing difficult in creating glowing balls. The only thing that complicates the process is the time spent on it. However, if the balls are being created, for example, to decorate a wedding celebration, children can be involved in creating the glowing balls.
This way they will get a feeling of being involved in the holiday, and at the same time you will remove them from under your feet (fidgets often get in the way in the general commotion) and save money at the same time. Naturally, it will first be necessary to demonstrate several times how a luminous ball is created.
Creation method – simplicity and speed
First you need to make sure that the ball is not defective. With one breath, fill the ball with your lungs, pinch it with your fingers and make sure that it has no holes and holds air without any problems.
However, the air that is in the lungs is warm. This may cause condensation (water droplets) to form inside the ball. It is not good. For this reason, it is better to use a special pump to inflate the balloons.
If the ball is of high quality, we deflate the air and place a luminous element inside it. It is created as follows: a battery is clamped between the LED plates. As a result, the LED begins to glow.
Carefully wrap the battery and covers with electrical tape or tape. This will ensure a constant glow, as well as protect the ball from punctures by sharp covers (contacts) of the LED from the inside.
After the luminous element is placed inside the ball, you just need to fill it with helium from a balloon and tie it tightly so that the gas does not escape from it. As you can see, even a child can cope with such a task.
The video will demonstrate the creation of luminous balls from “A” to “Z”:
Illuminated balloons can decorate any holiday and become an original addition to a gift.
Business idea: making glowing balls
IN Lately Garlands of glowing balloons are widely used at celebrations. It’s easy to purchase them: you can order them to be made in a workshop, or you can simply buy them in an online store. But it is much more profitable to make glowing balloons with LEDs with your own hands. This does not require special skills, complex equipment or expensive materials. It is enough to buy LEDs, balloons, stock up on a can of helium and patience.
Our business assessment:
Starting investments – from 1000 rubles.
Market saturation is average.
Difficulty of starting a business - 1/10
Business benefits
- At first, you can make balloons with LEDs at home, because the equipment and materials do not take up much space. This will save money on rent.
- To produce a small batch of products, there is no need to hire additional personnel. Only after business takes off and sales volume increases several times, can you think about hiring employees.
- The productivity of such an enterprise is quite high: within an hour you can make 200 balls.
- The technological process consists of 2 operations.
- Glowing balls with LEDs are made from inexpensive components. Which indicates the low costs required for the purchase of raw materials. At the same time, the retail price is several times higher than the cost of the product.
The main advantage of a glow-in-the-dark ball business is the ability to combine it with any other type of activity.
Demand for products in the market of goods and services
When selecting a client base, you should pay attention to companies involved in organizing holidays, educational institutions and kindergartens. You can enter into agreements with these organizations for the direct supply of finished balls.
Regular buyers of such products are:
- institutions Catering: restaurants, cafes, bars;
- retail outlets selling related products;
- gift shops and online stores;
- organizations organizing corporate evenings for their employees;
- companies engaged in improvement of streets, parks and public gardens.
The company can take on individual orders, for example: making glowing balls with LEDs for a wedding, anniversary, City Day, etc. The idea is quite profitable, because for one wedding alone they usually order from 120 pieces.
Manufacturing technology
Before you make a glowing ball with your own hands, you need to prepare the following materials:
- balloons;
- LED light bulbs;
- tablet-shaped batteries;
- adhesive tape, .
It is important to remember that the glow balls must be made of dense latex in order to withstand a certain load. LEDs with batteries, whose operating time ranges from 5 hours to 2 days, are placed inside the ball.
Many people do not know what they inflate the balloons with. They are filled with air or helium. If you plan to lift the balloons up, you should inflate them with helium, which is much lighter than air. As a result of pumping, the ball increases to 35-40 cm in diameter.
LEDs can have different modifications, which affect the price of the device. They can burn with a direct and even light, and turn off after a certain period of time, only to light up again later, they can also blink, fade out smoothly, change up to 5 color positions.
Financial plan
The cost of LEDs in retail varies from 15 rubles. per piece, so it is better to buy LEDs for balloons in bulk. Their price in this case is determined by the volume of the batch. For example: when purchasing from 100 to 1000 LEDs, 1 pc. will cost 12 rubles, and the purchase of 2,000 LEDs will cost the entrepreneur 10 rubles. a piece.
The price of a latex ball varies from 5 rubles. a piece. The cost of the product will be no more than 25 rubles. The retail price of glowing balloons is set depending on the filler:
- balloons with LEDs pumped with air will cost about 50 rubles;
- helium - from 150 rub. a piece.
This shows that the minimum markup for finished products equal to 100% or more.
Organizations involved in the design of special events usually buy glowing balloons in bulk by pre-order, specifying the color, shape and quantity of products. For such clients, it is advisable to set individual prices in order to interest them.
If you have the right skills, you can make money by reselling holiday decorations. If you buy glowing balloons with LEDs at a price of 60 rubles. (wholesale price), and sell them in a park or on a city street for 140 rubles. per piece, then by selling 10 jewelry you can earn about 800 rubles. In this case, special attention should be paid to the location of the outlet.
Today, when the “handmade” trend is in trend, making things with your own hands for the home is relevant and also rational. Great solution as decorative element there will be balloons with glowing light bulbs inside. It certainly won't be complete lighting fixture, but it will fit perfectly into the interior, as a festive decoration for a birthday or any other holiday.
Most often, LEDs are placed in balloons. But other devices can also serve as a light source. This article will tell you how you can make such a beautiful and unique part of the interior with your own hands.
Various formats
Balloons are ordinary decoration any holiday: birthday, New Year, wedding anniversary, etc. But if you insert a luminous element such as LEDs into them, you will receive a unique interior design element. And by making such lamps yourself, you will not only surprise your friends, but also delight your child.
The most important detail here will be the light source - the LED. It directly determines how beautiful and bright the ball will turn out.
Today, you can make luminous balloons with your own hands from the following light sources:
Ball with tablet
- glowing tablet element. It is a widely used lighting option. The light source here is an LED tablet. It is quite simple to make such a design, and the light source itself will easily fit into any type of ball. The glowing “heart” will look especially beautiful here. But such a tablet is not suitable for large-scale illumination, since it is not capable of creating uniform illumination of the ball. Here only the bottom of the inflatable product will be illuminated, since the tablet has sufficient weight. Sometimes the glow is not noticeable at all if viewed from a certain angle. Another disadvantage of this design will be the short glow period;
- glow stick. In its middle, the stick contains an LED (some sticks use several diodes). In addition to the LEDs, it has a built-in battery for autonomous power supply. Making such a luminous ball is quite easy and quick. But the disadvantage of this design is the sufficient weight of the stick and its noticeable location inside the inflated ball. As a result, such a balloon cannot be filled with helium. But for a party this is quite enough;
Note! You can buy such a stick in a specialized store, or you can make it yourself from improvised materials.
Balls with a stick
- fixed stationary LED. This option will be the highest quality solution for independently organizing the lighting of balloons. Popularity this option I got the assembly because it is possible to place the LED higher here. In addition, LEDs for balls can be found much easier than a tablet or stick. This is an option for any life situation.
Note! A big advantage of using stationary LEDs to illuminate inflatable products is their ease of operation. This balloon can be inflated with either gel or regular air.
LED balls
Whatever option you choose to create “space balls”, you can do everything yourself. The complexity of the whole design lies only in presenting the inflatable ball and the LED as a single whole.
Preparing materials
In order to quickly mount such an original inflatable ball, depending on its type, you will need the following materials:
- air balloons;
- 3V batteries for the wand;
- LEDs 3V;
- hot glue or tape;
- LED flashlight for tablet assembly.
From the tools for empty assembly, you can use glue guns and a soldering iron.
Preparing for work
To make a glowing inflatable ball with your own hands, you must follow the assembly instructions:
- First of all, you need to decide on the type of inflatable balloons. Using this method you can highlight a ball of any color. Usually multi-colored ones are used at holidays, but for a wedding or party you can choose balloons of a certain type. color range(if there is any special theme of the celebration). In addition to the usual round products, you can use shaped and oblong balls here. The simplest lighting will be for standard and oblong products;
- after that, we decide on the type of backlight to use: stick, tablet or stationary LED. Further in the instructions we will stick to the situation of installing the LED, since this is the most optimal option;
- choose LEDs. For a birthday, you can use colored LEDs, but for a wedding it is better to stick with white ones. Their light in the night sky will be especially bright and festive. Do not insert an LED of the same color into the ball. This will make its glow invisible;
Note! The choice of LED color should be made based on the shading of the room in which the holiday will be held. In a brightly lit room, the illumination of the balls will be almost invisible, no matter what color you choose. And in dimly lit rooms they will show your craft in its maximum beauty. Therefore, such products will fit perfectly into any party.
LEDs
- ⦁ next we connect the LED to the battery. For attachment, you can use electrical tape or regular tape. It is better to use tape, as it will not interfere with the LEDs. On at this stage It is important to make the connection correctly. Therefore, pay attention to the polarity of the battery. All elements must be connected minus to minus and plus to plus. Most of on the battery is a plus, and the smaller one is a minus. Otherwise the LED will not light up. Checking for correct connection should be done immediately, and not already in the ball;
- check the connection for strength. All elements must be firmly fastened. Otherwise, when placing this structure inside the ball, the batteries may simply fall out.
Using this scheme, we prepare LEDs for all the balloons that will need to be inflated and illuminated. The first element will take you a few minutes, but each subsequent element will go like clockwork.
Now we have all the elements to assemble this inflatable holiday decoration.
Let's start assembling
The most important and crucial moment remains - to connect all the elements into a single structure or place LEDs in balls. The easiest way to assemble an LED-battery device is, of course, to fit into large balls. But if the product is small, then everything should be done very carefully so as not to pierce the ball itself or interrupt the contact between the battery and the diode.
Assembly proceeds according to the following scheme:
- we check the strength of the prefabricated device;
- stretch the hole in the ball and carefully push the LED with the battery inside. In addition to introducing the LED, stretching allows you to test the strength of the product. If there is a defect or hole in it, it will definitely break at this stage;
Plowing device
- after that we inflate the balloon. Here, to prevent eye injury if the product ruptures, be sure to wear safety glasses. You can inflate either with your mouth or with a balloon;
Note! The ball, if it has a standard configuration, should take on a teardrop shape. Do not overinflate the product, otherwise the risk of it bursting increases during operation of the LED.
- we tie the ball with a bright and beautiful ribbon and the work is completed.
As you can see, it’s easy to make LED balls with your own hands. Just follow the instructions above and your holiday will be a success!
Lighting in the kitchen of a small apartment
Choosing a lamp for a bathroom mirror, placement options
Will decorate any children's party, party, birthday. Making your own balls is quick and easy. The work does not require special skills or expensive equipment, and the balls will glow and delight with their radiance for more than three days.
Choose the color of the balls and LEDs
For a children's party, it is better to use colored LEDs, or select a luminous element to match the interior of the hall. For weddings, white LEDs are often used - they glow brightly in the night sky and are a good replacement for Chinese sky lanterns.
Important!
The darker the room, the brighter the balls will glow. Therefore, it is better to launch at night.
If you are having a theme party in blue and white or blue colors, then it is better to put a white LED in the blue ball. It glows brighter than blue. In a green ball the color is almost invisible, in a pink ball it is visible. Yellow, orange and red balls can easily use a red LED - it is the brightest of all.
First of all, you need to connect the battery and the LED. To do this, use electrical tape, masking tape or ordinary tape.
Important!
Pay attention to the polarity of the battery and the LED - you need to apply the elements plus to plus, minus to minus. If they are connected incorrectly, the LED will not light up.
Both elements have a larger and a smaller surface. Large is a plus, smaller is a minus. Taking this into account, connect the battery and LED and wrap it with electrical tape. Now the LED is not going anywhere. Using this scheme, we prepare all the LEDs that you intend to use - plus to plus, wrapped, put aside.
If you purchased transparent or white balloons, it would be better if the colored trim did not stand out from the balloon. In this case, we recommend using transparent tape.
It is also very easy to attach an LED with a battery using sausage balls, which are also used to make “dogs”. Take the ball and cut it into pieces about 2 cm long - we get rubber bands.
You insert the scissors into the rubber band, move them apart, and insert the battery and LED inside the rubber band, remembering the polarity “plus to plus.” This rubber band tightly holds the LED on the battery and covers the legs, which will not tear the ball when inflated.
If you are lucky and you bought large balls, then the LED can easily get inside. If the ball is small, then you need to carefully push it deep into the ball.
Important!
Better take big balls.
You can also stretch the ball and put LEDs inside. It will be much faster. In addition, by stretching the ball, you additionally test its strength. And if there are holes in it, then it will break.
Inflating the balloons
When you inflate balloons, you must protect your eyes, because no matter how good the balloons are, there will definitely be holes in them. And when the ball bursts and the LED flies out, it can injure your eyes.
Important!
We put the ball on the gas cylinder. You need to inflate it until a small balloon appears. If you overinflate a balloon, deflate it a little because an overinflated balloon will pop on its own. We make a drop-shaped ball and tie it with a ribbon.
Balloons and bright lanterns are a common attribute of many holidays. Separately they are good, but together they are even better. Creating glowing balls will not take much effort or free time, but the result will exceed all expectations.
You will need: ordinary multi-colored balls, button batteries, LEDs, scissors, adhesive tape, eye protection glasses, gas cylinder, as well as ribbons to tie the balls.
Video instruction: How to make glowing balloons with your own hands.
Balloons are a great holiday decoration. A huge number of colors, shapes and sizes allows you to decorate the room and set the mood for the celebration. Here I will tell you how to surprise all the guests at your next party very interesting decor and make beautiful glowing balls
We will need:
- Balloons
- 5-10 pcs. LEDs
- 5-10 pcs. 3V batteries
- Scotch
Take a balloon and place one glowing LED in it. All you have to do is inflate the balloons with air and you're done!
If you want your balloons to float in the air, then fill them with helium. Depending on the type of LED and battery, the balls will delight you with their glow for 24-48 hours.
This is enough for any holiday. After the party is over, simply remove the LEDs from the balloons and save them for the next celebration
