Plastic bottles In everyone's life, they have firmly taken a place as disposable containers and their use is only in the form of containers, but we can get much more benefits without throwing them away. For most people, a bottle is a useless thing, but with some ingenuity you can find many ways to make your life easier and save money using bottles. You can make it from a plastic bottle almost everything, you just need the bottles themselves and a little imagination.
Sprinkler for the garden.
One of the simplest ways is useful apply the bottle in the garden or garden- make it out of garden sprinkler, it couldn’t be easier to make. Attached to garden hose plastic container and make several small holes, then tightly fasten the hose with the neck. This is how we made a garden watering system.
Advice.For convenience, use a square container or secure a round one with a weighty object.
It is not uncommon for the charger cable to be missing. from the outlet to the place where can I put it mobile phone, everything can be fixed by making a clumsy holder for your mobile phone. You need to cut the bottle diagonally, take the bottom and cut out the top round hole under the socket. Now the phone will lie in the bottom using a socket.
Advice.It is better to cut the bottle as close to the top as possible, this will allow you to hold the phone more securely.
You lose every time stationery , you have to look for them, you need to make them easy to make stand. In addition to the bottle, you will need a bolt and nut. You need to cut off the top and bottom, then drill a hole in the plug and bottom and connect it with a bolt and nut. It will be convenient to use this since it turns out to be 2 sections. The upper compartment will accommodate pens and pencils, and the lower compartment will hold paper clips, buttons, graters, and you won’t have to take out your pens for small things.
Advice.Tighten the bolt and nut loosely, then the top will be able to rotate.
Empty canister with a manual one you don’t have to throw it away, it can be useful if you don’t need it or have become unusable, it will work scoop. It is necessary to mark the canister with a marker as in the photo and cut it.
Advice.For convenience, make the nose of the scoop square.
Laminating a glass jar.
We use glass jars for different purposes and you have to mark them in all ways, but the inscription on the glass does not stick well, and the glued pieces of paper quickly become unusable, and laminate no possibility. With an industrial hair dryer, this problem will be solved forever, and the strength of the cookware will increase. If you break it, you won't have to pick up the pieces and cut your hands. Using your imagination, you can decorate the jar well. It’s easy to do, you just need one bottle of suitable size and color and a piece of paper with an inscription or design that we want to attach. However, there is a way to do without an industrial hair dryer.
Method one.
Cut off the top of the bottle and place it on the bottom with the cork facing up, then place the jar with the inscription on the cork, put on gloves and start heating the industrial hair dryer. When the hairdryer is hot, you can begin to gently heat the jar in a circle, without stopping in one place. You need to take a reserve, the plastic will settle both in width and height. When the jar is tightly sealed with plastic, cut off the excess and heat the angular parts again, if all parts have become even, the jar is ready.
Advice.Start heating the plastic from the bottom, gradually rising.
Method two.
Cut off the top of the bottle and place a jar with an inscription glued to the bottom. To heat the plastic in this case, we need a tall pan of water and kitchen stove. The pan should not be full, otherwise water will splash onto the stove. When everything is ready and the water is boiling, we lower the bottle into boiling water and begin to turn it slowly, holding the neck of the glass jar with tongs.
Advice.By holding the jar at an angle, the effect will be achieved faster.
Are you tired of balls of thread, getting tangled up with each other and getting stuck in knots, the way out is simple - we make a device from bottles of any size for holding threads in one place. At the same time, the balls will rub less, get tangled and get stuck. You can make a holder that can be attached to a chair or armchair. We cut the bottle closer to the neck, leaving a part that needs to be cut in the form of a rectangle to the bottom, after which we make a hole in the resulting tail according to the size of the lid and put it on.
Advice.The device can be hung by making holes on opposite edges and threading a thread through them.
With the onset of cold weather, everything in every home turns on possible types heaters and at the same time indoor air becomes dry, and we begin to experience discomfort. Headache, skin problems, irritation of the mucous membrane and other inconveniences can be avoided by making a silent, simple, convenient and reliable room humidifier. For this you will need:
- Adhesive tape
- Scissors or knife
- Strip of fabric or lace
- Two liter bottle
- gauze fabric
Advice.Pouring into a container essential oils, we will get an air freshener.
Instructions
- We make a 5×10 centimeter slot in the side of the bottle; errors are acceptable.
- Using strips or string, we hang the resulting bottle on the straight upper pipe entering the battery with the hole facing up and secure it tightly with tape so that the bottle does not jump out and spin.
- We fold the gauze several times to form a rectangle 10 centimeters wide and a meter long.
- We place the middle of the folded fabric in the hole, and wrap the ends around the battery pipe.
- Pour water into the resulting container and moisten the wound gauze, this is the maintenance of the device.
Mosquito trap
From a two liter bottle make a mosquito trap. The trap will attract small insects the results of fermentation processes, namely carbon dioxide. To make it you will need:
- 1 gram baker's yeast
- two liter bottle
- dark fabric
- 50 grams of sugar
- 200 ml of water with a temperature of no more than 40 degrees
We begin production by cutting it so that the neck, upside down, fits tightly into the bottle and does not reach the water. Now that the container is ready, pour in sugar, yeast and fill it with forty-degree water, it should not be warmer or hotter. If the liquid is too hot, fermentation will not begin due to the death of the yeast bacteria. Pour the water slowly and stir the mixture. Now we insert the neck into the bottle like a funnel. To catch mosquitoes, the trap needs to be covered thick fabric, not transmitting light or paper. Once caught in such a trap, mosquitoes will not escape. Insects will be caught in such a trap for up to a week, after which we will change the mixture.
Advice.After preparing the mixture, place it in a warm place.
Of several one and a half liter bottles we make it simple and extremely durable broom. This broom is convenient for sweeping floors and fleecy surfaces. The hardness of the broom depends on the number of pieces cut.
Manufacturing.
First, we make preparations. We cut off the neck and bottom, spread the middle into flaps to the middle, no wider than two centimeters. You will need 4 of these, and leave another one with the top and neck. Now we put everything together, and cut off the top of the next bottle, put it on what happened and squeeze it. We take a strong wire and thread it through all the bottles along the edges. We put everything on the handle through the cork and secure it with wire. For reliability, we drive a nail through the neck into the handle.
Advice.Use copper stranded wire.
If in nature we didn’t have mugs you can easily make it from a bottle. First, cut off the top, then use a knife or scissors to cut out a square, retreating 2-3 centimeters from the top cut. We cut it evenly and with the expectation that the width of the remaining jumper will be the handle. Turn the top ring inside out and push through the bottom. Now we have a mug that can help us out in nature.
Advice.Without cutting out a large square, you can fold the middle section and place the cork ring over it.
Create self-watering flower pot just cut off the top of the bottle first, then the middle part, so that the top part fits in without touching the bottom. Then we carefully make a hole in the cork and thread a thread through it. The thread should extend 5 centimeters from both sides of the cork. Now that everything is ready, pour water and insert the top part that looks like a funnel. Now we fill in the soil, not forgetting to wet it. The plant will absorb the required amount of liquid, this will simplify plant care.
Advice.Fertilizers can be added to the tank.
Arriving in nature you forgot the cutlery there is nothing to notice them with. To save the situation, a bottle, a knife, and a lighter are enough. Cut out one of the five parts of the bottom and a little of the top in one piece after burning the edges with a lighter. You can use this spoon to eat and prepare food.
Advice.After burning, rinse the device.
Not all refrigerators have vegetable cells and you have to store vegetables in a variety of forms, while the food gets beaten, scratched and rolled all over the refrigerator. For convenience, use five-liter eggplants. Cut off the top part and fill with vegetables or fruits. In this form, the food will not wrinkle and there will be significantly more free space in the refrigerator.
Advice.Store vegetables and fruits in separate containers.
During the cooking process it is required separate egg white or yolk. But they are not easy to separate, the yolk is very fragile and if you puncture it, it will mix with the white. You can cheat with a bottle. Crack the egg onto a plate, squeeze the bottle and bring it to the yolk. By unclenching, we will draw the yolk into it without damaging it. The method is suitable for preparing dishes whose recipe includes a lot of eggs, for example, the common french dessert from Meringue meringue.
Advice.Rinse the bottle before use.
We managed to make two useful things from one plastic bottle. See for yourself.
1. Scoop made from a plastic bottle
2. Holder for cell phone
Once again I was at the market and saw interesting thing. You also noticed it a hundred times yourself. Everything is very simple and banal, but when you need to, you won’t remember and won’t do it.
A scoop cut from a plastic bottle for scooping up small amounts of bulk materials! As soon as I got home I got down to business. Take a plastic bottle, scissors and a marker. With a marker we mark the boundaries along which we need to cut, as shown in the photo, and go ahead.
We don’t throw away the cap from the plastic bottle, but close the “neck” so that the collected bulk material didn't get enough sleep.
This is how we made a scoop for scooping sugar, cereals, etc.
That's not all.
Cell phone holder.
See for yourself.
The remaining part of the plastic bottle also found its use.
Carefully correct the cut edges so that there are no unevenness and it looks beautiful.
Cut a round hole. So we got a holder for the cell phone. We hang the holder on the charger and plug it into an outlet, and put the phone inside. Very comfortably. I recommend to all.
If the holder is large, you can cut it smaller - at your discretion, I left it this way.
This is how I made two useful items from one plastic bottle.
A cell phone holder can be made in a similar way from the top of a plastic bottle with a neck.
We managed to make two useful things from one plastic bottle. See for yourself.
1. Scoop made from a plastic bottle
2. Cell phone holder
Once again I was at the market and saw an interesting thing. You also noticed it a hundred times yourself. Everything is very simple and banal, but when you need to, you won’t remember and won’t do it.
A scoop cut from a plastic bottle for scooping up small amounts of bulk materials! As soon as I got home I got down to business. Take a plastic bottle, scissors and a marker. With a marker we mark the boundaries along which we need to cut, as shown in the photo, and go ahead.
We do not throw away the cap from the plastic bottle, but close the “neck” so that the collected bulk material does not spill out.
This is how we made a scoop for scooping sugar, cereals, etc.
That's not all.
Cell phone holder.
See for yourself.
The remaining part of the plastic bottle also found its use.
Carefully correct the cut edges so that there are no unevenness and it looks beautiful.
Cut a round hole. So we got a holder for the cell phone. We hang the holder on the charger and plug it into an outlet, and put the phone inside. Very comfortably. I recommend to all.
If the holder is large, you can cut it smaller - at your discretion, I left it this way.
This is how I made two useful items from one plastic bottle.
A cell phone holder can be made in a similar way from the top of a plastic bottle with a neck.
See for yourself.
If we talk about the obvious, but about what we sometimes don’t even think about, it turns out that the average lifespan of a plastic bottle is only 10-15 minutes. However, the period of its complete decay in nature is about 300 years. Comparing such dates is difficult, but necessary. It is necessary to realize how long after we have taken advantage of the “momentary weakness”, nature will restore its natural balance. Although, in order to somehow “brighten up” such a significant difference in the period of use and disposal, you can give a “second life” to already used plastic bottles. In this article we will talk about what can be made from empty, used plastic bottles.
How to make a greenhouse out of plastic bottles
You can make a greenhouse out of plastic bottles by placing the bottles in rows on wire and placing these rows one next to the other. Don’t forget about the well-known method, when even small “shreds” of plastic are cut out of bottles and then sewn into a large canvas. It is from this “canvas” that the walls and roof of the greenhouse are made.
How to make a pencil holder from a plastic bottle
The simplest thing you can make from a bottle is an ordinary pencil holder. Simply cut the bottle to the desired height and melt the edges, for example, on the surface of an iron.
How to make a drawing stamp from a plastic bottle
It is important to have some imagination here. If you have one, then your plastic bottle can become useful tool used for drawing.
How to make a toy from a plastic bottle
You can shorten the bottle by cutting out a piece of plastic from the middle, and then fasten the top and bottom, decorating the resulting toy.
How to make a spoon from a plastic bottle
This option for using a plastic bottle will come in handy on a hike or on a picnic when you don’t have a spoon but have an extra plastic bottle.
How to make a case from a plastic bottle
It is very practical to use a plastic bottle when transforming it into a case where you can store various useful little things.
The lock can be glued in or sewn in, depending on what seems more secure and simpler to you.
How to make colorant from a plastic bottle
How to do without plastic bottles at the dacha. Here they are a container for seedlings and material for greenhouses, and even a sprinkler for planting. It is enough to supply water through the neck of the bottle, after making many holes in its walls.
How to make a feeder-dispenser from a plastic bottle
From two plastic bottles you can make a feeder and dispenser for pets.
How to make a broom from plastic bottles
You can even make a broom out of plastic bottles. To do this, we place the already loose bottle bodies one on top of the other, like leaves in cabbage, and then secure them using the same elements from plastic bottles. Don't forget about the handle and the broom is ready.
How to make a closure from a plastic bottle onto a plastic bag
The neck and cap of a plastic bottle can be used as a dispenser-lock, together with a plastic bag. We thread the edges of the bag into the neck and screw on the lid. If necessary, unscrew and dose bulk products through the neck of the former bottle.
How to make a scoop from a plastic bottle
If you have used bottles made of thick plastic, then with a little imagination and skill you can make a good scoop.
How to make a phone holder from a plastic bottle
A practical pocket - the holder can be made from a plastic bottle if it is cut according to the photo below.
How to make a lamp from a plastic bottle and plastic disposable spoons
An unusual lamp can be made from a plastic bottle and disposable tableware(spoons).
How to make a vase from plastic bottles
If you have patience, time and desire, then plastic bottles make good vases.
How to make slippers from plastic bottles
If you came to someone's bathhouse and forgot your slippers at home, then plastic bottles can make good disposable slippers.
How to make a washbasin from a plastic bottle
Well, everyone knows about the washbasin made from plastic bottles.
Of course, in reality we have given only special cases, since real examples There is much more use of used plastic bottles. That is why we once again encourage you to try to use what many consider garbage. Such decisions will help us save time, money, develop our imagination and logic, become a hobby for some, and, most importantly, slightly support the ecology of our planet.
Very practical and convenient accessories for the sandbox. Made in five minutes from a plastic bottle. Your child will really like a transparent bucket and scoop, especially if he decorates them with his own hands.
Bucket and scoop
Preparation method:
Both the bucket and the scoop are made from the same bottle.
- First, cut off the bottom of the bottle. Using a knitting needle or scissors heated over a fire, we make holes on both sides for the wire handle. Insert and secure the handle. We paste stickers or transfers. If the edge of the bucket is sharp, you can wrap it with regular electrical tape.
- The scoop or spatula is made from the remaining part of the bottle. The top part of the bottle with the cork will be the handle, and cut out the middle part of the bottle smoothly to fit the scoop. You can also cover it with stickers, just try to stick it closer to the handle, otherwise they will quickly peel off on the working part of the scoop.
It is advisable to choose even bottles for these sand accessories. In our version, the bottle was embossed only at the bottom and near the cork, and the middle, from which the blade was cut, was smooth.
