Udod 09-02-2009 15:13
I acquired a Husqvarna 365XP chainsaw completely by accident. There was no intention of buying it, but they offered it at such a price that I couldn’t refuse. I’ve never owned a tool like this before, so I don’t understand a damn thing about it. The instructions for its use are more like safety instructions. (Helmet, glasses, gloves, ambulance nearby, etc.). Maybe someone will tell you the intricacies of operating such a device, or give a link.
Udod 09-02-2009 16:01
Udod 12-02-2009 15:21
I don’t understand anything at all. I started looking on the Internet for data on my saw and found nothing. But I discovered that appearance and its characteristics fully correspond to one of the Hitachi models, although all the nameplates with Husqvarna inscriptions say that they were made in Sweden. Is this the result of globalization?
Alexander NN 12-02-2009 18:21
Before starting, check if the brake is on, i.e. Pull the brake handle towards you. Start it like this; you turn on the ignition, if it’s frosty outside, then it starts to choke and very slowly crank the engine with a cord, the slower the better, as soon as you feel the flash in the cylinder it will give off in your hand, only after that pull sharply, here, on the contrary, the sharper the better (within reasonable within limits, of course, otherwise you can tear off the lace). Well, the chain should be properly tensioned, you pull it with your fingers, it should pull back 1cm, then back into place, like an elastic band from your panties. When sawing, do not press hard, or better yet, very lightly and under your own weight. When you are sawing a strong dry forest, don’t give too much gas, and if you feel that the sawing has become weaker, then immediately stop and sharpen the chain, otherwise you will burn it until it turns blue, like the sky before a storm. Well, the Swedes have everything right with the helmet, etc. If you work in our Russian-Moscow forest, collecting firewood from dead wood, then knowledge from strength-of-material materials, such as a beam with a pinched end, diagrams of bending moments so as not to pinch the saw bar, will not hurt, and where to run from the tree, prepare the way, fir trees , for example, remove the small ones, otherwise it’s very easy and you can bruise your end.
passerby 12-02-2009 18:25
quote: Originally posted by Udod:
I don’t understand anything at all. I started looking on the Internet for data on my saw and found nothing. But I discovered that in appearance and characteristics it completely corresponds to one of the Hitachi models, although all the nameplates with Husqvarna inscriptions say that they were made in Sweden. Is this the result of globalization?
For example - http://goods.marketgid.com/goods/568/590791/
Udod 12-02-2009 18:38
quote: Yes, full of links - ask the Great Google "Husqvarna 365 XP" and you will get a bunch of links.
For example - http://goods.marketgid.com/goods/568/590791/
According to this link, you will simply run into 365. and nothing about XP. I've already been through this. By the way, the photo does not correspond to what I have.
Kwik 12-02-2009 21:07
Why is the tire upside down?))))
Udod 12-02-2009 21:13
quote: Why is the tire upside down?))))
Yes, they probably got it mixed up in the store. The chain fits fine on it. And the teeth on the sprockets seem to be symmetrical. For work, IMHO, it doesn’t matter. Although, I’ll rearrange it, of course. Otherwise it’s undignified
im35 12-02-2009 22:03
Dear Udod! I’m afraid to disappoint you, but I recently bought something similar “at a reasonable price” - Husqvarna. The result is that in the special store they grinned and said the magic word - China. True, everything is working so far. Yes, they sold LKN.
Udod 12-02-2009 22:27
quote: Dear Udod! I’m afraid to disappoint you, but I recently bought something similar “at a reasonable price” - Husqvarna
It was cheaper than the Chinese Partner with a 30cm tire, so I’m not too upset. Yes, and in appearance there are no special jambs visible. You'll have to climb inside, there's a mark somewhere.
PS By the way, I didn’t notice any differences from the Hitachi listed on the site.
Teaching staff And LKN is what (who)?
im35 12-02-2009 22:34
We need it clear))))))))))))))) persons of a specific nationality))))))))))))))))))))))))
kkivi 17-02-2009 12:35
Isn't 1cm a lot?
About the tire.
kkivi 17-02-2009 12:35
quote: Originally posted by Alexandr NN:
It should be properly tensioned, you pull it back with your fingers, it should pull back 1cm, then back into place, like an elastic band from your panties. P
Isn't 1cm a lot?
About the tire.
It still needs to be turned over periodically so that the sprocket wears evenly. And sometimes even change
kkivi 17-02-2009 12:36
quote: Originally posted by Alexandr NN:
It should be properly tensioned, you pull it back with your fingers, it should pull back 1cm, then back into place, like an elastic band from your panties. P
Isn't 1cm a lot?
About the tire.
It still needs to be turned over periodically so that the sprocket wears evenly. And sometimes even change
passerby 17-02-2009 18:07
quote: Originally posted by Alexandr NN:
...Well, the chain should be properly tensioned, you pull it with your fingers, it should pull back 1cm, then back into place, like an elastic band from your panties.
Under no circumstances 1 cm!!! The chain tension is determined exactly this way - you pull it with your fingers - the chain MUST rise above the tire, BUT TO A HEIGHT OF NO MORE THAN 4-5 mm! Those. so that the CHAIN TEETH DOES NOT COME OUT OF ENGAGEMENT WITH THE BAR. If there is more, the chain may fly off the tire when sawing - THIS IS DANGEROUS! Do not forget that the chain heats up when sawing and stretches a little - you need to watch it and tighten it in time.
Pavluha 13-03-2009 10:37
quote: When you are sawing a strong dry forest, do not give a lot of gas
All instructions say to operate at full throttle (or throttle). If you don't apply more gas, you can burn the clutch. It is inertial (more gas - holds tighter).
The tire is turned over from time to time so that it wears out (erased) evenly. Chain lubrication is required. The first tank from the tire is filled with any MOTOR oil (in winter, a thinner hydraulic oil can be used). There is a hole on the tire near the sprocket axis. Use a grease fitting to add lithol (or a similar lubricant). So we lubricate the sprocket bearing.
It is better not to store diluted (with additive) gasoline for a long time, but to prepare a small amount before work and try to use it.
The sharpness of the chain is determined by the sawdust. Should be in the form of a “straw” if “dust” means sharpening. The RC itself is sharpened with a round file of the required diameter, and the limiter is flat; its height regulates the “aggressiveness” of the sawing.
For hard (frozen) wood the limiter is larger (higher), for soft wood it is smaller (lower).
Good luck with the operation!
| Cylinder displacement, cubic meters cm | 65.1 cm3 |
| Power | 3.4 kW / 4.6 hp (I) |
| Speed idle move | 2700 Rotation speed, rpm |
| Maximum speed | 9000 Rotation speed, rpm |
| Cylinder diameter | 48 mm |
| Cylinder stroke | 36 mm |
| Ignition system | SEM AM50 |
| Ignition module air gap | 0.3mm/0.01" |
| Spark plug | NGK BPMR7A |
| Interelectrode gap | 0.5mm/0.02" |
| Carburetor model | C3M-EL2B |
| Fuel tank volume | 0.77 l |
| Oil tank volume | 0.4 l |
| Oil pump type | Adjustable flow |
| Oil pump flow | 4-20 ml/min |
| Chain pitch | 3/8 inch |
| Recommended tire length, min-max | 38-70 cm / 15"-28" |
| Chain speed at maximum power | 20.7 m/s |
| Equivalent vibration level (ahv, eq), front/rear handle | 3.6/3.5 m/s2 |
| Sound pressure near the operator's ear | 102.5 dB(A) |
| Guaranteed sound power, dB(A) | 112 dB(A) |
| Weight (without cutting equipment) | 6 kg |
Peculiarities
- Carter made of magnesium and aluminum alloy. The durable engine crankcase withstands high-rpm operation and is designed to withstand active professional use chainsaws, providing long term services
- Three-piece forged crankshaft provides exceptional strength and durability
- LowVib (Anti-vibration system). Effective anti-vibration elements (dampers) absorb vibration, protecting the user's arms and hands from negative impacts
- Adjustable oil pump makes it easy to adjust chain lubrication to suit your needs
- Chain tensioner mounted on the side of the body. Lateral chain tension makes chain adjustment quick and easy
- Ergonomic grip. Angled front handle provides better grip and a natural working position for your hands
- Effective chain brake is activated by inertial forces
- Quick release cover air filter Saves time when cleaning or replacing spark plugs
- Air Injection (Air purification system). Centrifugal air purification system to reduce wear and increase intervals between filter cleanings
- Quick release air filter mount. Makes cleaning and replacing the air filter much easier
- Smart Start (Easy Start System). The engine and starter provide quick and easy starting. Starter cord resistance reduced by 40%
It is a member of the Husqvarna saw family, which also includes the 362XP and 372XP. It is used for felling and pruning trees, as well as for other industrial and household needs. The device is a high-power professional product powered by a gasoline engine and designed for long time work without interruption. The device is designed for right-handed use.
The Husqvarna 365 chainsaw is equipped gasoline engine with a cylinder volume of 65.1 cm3. Its power is 3.4 kW. The cylinder diameter is 48 mm and the piston stroke is 36. The SEM ignition system is based on the operation of NGK BPMR 7 A/Champion RCJ 7Y spark plugs with an electrode gap of 0.5 mm. The total weight of the device without saw set is 6 kg. The list of device nodes includes:
- Frame;
- Pens;
- Lever;
- Covers (clutch and cylinder);
- Starter;
- Hand protection;
- Tooth stop;
- Decompression valve;
- Buttons (ignition start, heated grips);
- Chain catcher.
It is worth noting that the device is supplemented with a heated handle system for working in winter time, a cooling system for trouble-free operation and a centrifugal air cleaning system for easy maintenance.
Husqvarna 365 chainsaw carburetor
The Husqvarna 365 chainsaw is equipped with a Zama carburetor model C3M-EL2C. It is equipped with a heating system, which allows you to use the saw in extremely low temperatures. This element requires precise tuning and has three speed adjustment areas. The first is used to adjust high speeds, the 2nd – low, and the 3rd – idle. It is advisable to have it set up by a professional.
Announcement:
The Husqvarna 365 chainsaw, as part of the saw set, in addition to the guide sprocket and bar, has a saw chain. Any tire option 15″, 16″, 18″ and 24″ is suitable for a Husqvarna H42 chain with a maximum number of toe teeth of 11T and a pitch of 3/8″. A cylindrical file with a cutting part diameter of 5.5 mm is ideal for sharpening it.
Technical characteristics of the Husqvarna 365 saw
- Type - chainsaw;
- Construction - manual;
- Power - 3900 W/hp;
- Chain pitch - 0.375 inches;
- Tire length - 38 cm;
- The maximum length of the tire is 70 cm;
- Engine capacity - 65.10 cc;
- Weight - 6.00 kg;
- Noise level - 114 dB;
- Fuel tank capacity - 0.77 l;
- Oil tank capacity - 0.42 l.
The Husqvarna 365 XP chainsaw is one of the most controversial models on the market today garden tools. On the one hand, this is a Chinese analogue of the Husqvarna 5200 chainsaw, which has practically nothing in common with the Swedish brand. On the other hand, this fact does not prevent the 365 model from being in demand among buyers, because the chainsaw has such important qualities as reliability, durability and high performance.
The design of a Chinese chainsaw includes the same elements and mechanisms that can be found in any European-made saw. In addition to them, the Husqvarna 365 XP chainsaw received several additional options, which allow it to stand out from other garden tools. Among design features Husqvarna 365 XP chainsaws should be highlighted:
- The presence of a durable magnesium-aluminum crankcase allows the chainsaw to successfully cope with its tasks even when long work under extremely high loads;
- The Husqvarna 365 chainsaw is equipped with a high-quality oil pump, the function of which is to distribute lubricant to the tool chain. If necessary, the volume of supplied oil can be adjusted;
- Availability of free access to the tension screw saw chain– thanks to this, the operator does not need to remove the protective cover each time;
- The decompression valve in the device is responsible for reducing the pressure in the cylinder of the Husqvarna 365 chainsaw;
- The handle is located at an angle for ease of operation of the chainsaw. The controls are located on the side cover, which greatly simplifies the adjustment of the Husqvarna 365 XP model.
Among other things, the Chinese manufacturer equipped the Husqvarna chainsaw with an effective easy-start system, the presence of which significantly extends the service life of the motor and other components of the model.
Chainsaw Husqvarna 365 XP - technical specifications of the model
In terms of its technical characteristics, the Chinese chainsaw Husqvarna 365 is slightly inferior to its European counterpart, the Husqvarna 5200 model. However, this does not make the demand for the 365 model any less. Specifications Husqvarna 365 chainsaws include:
- Cylinder volume – 65.1 cm3;
- Saw motor power is 4.75 liters. s./3.5 kW;
- Supply tank volume fuel mixture– 770 ml;
- Oil tank capacity – 420 ml;
- Saw chain pitch – 3/8 “;
- The maximum length of the tire used is 70 cm;
- Ready-to-use weight: 7 kg.
The standard equipment of the Husqvarna 365 XP chainsaw consists of a 45-centimeter bar, as well as a saw chain whose pitch is 0.325 “and the thickness of the drive links is 0.058”.
Repair instructions for Husqvarna 365 XP chainsaw
For the most part, the main spare parts and mechanisms of the Husqvarna 365 chainsaw are not satisfactory. However, chainsaw owners sometimes still encounter breakdowns of certain parts of the tool.
One of the most common headaches for model owners is when the Husqvarna 365 XP chainsaw does not start. As a rule, the reason for this lies in the use of the wrong motor oil. The first thing to do in such a situation is to inspect the spark plug and carburetor device for traces of engine oil.
The algorithm for further actions is as follows:
- Remove top cover housing, unscrewing the bolts holding it;
- Carefully remove the candle and inspect it carefully;
- If necessary, clean the part by removing dried engine oil stains from it;
- Set the spark plug aside and remove the remaining parts of the housing that protect the carburetor of the Husqvarna 365 XP chainsaw. Rinse and dry the parts thoroughly;
- Remove the screws and carburetor;
- Disassemble the assembly and remove oil stains;
- Treat the carburetor walls with a household degreaser;
- Wait until the elements are completely dry and assemble the Husqvarna chainsaw in reverse order.
In the future, to prevent flooding of the spark plug and carburetor of the Husqvarna 365 XP chainsaw, use only Chinese motor oil - it contains all the additives necessary for the proper operation of the chainsaw.
