Top 5 plastic windows. Which plastic windows are the highest quality and most reliable. What plastic windows are better to put

Today, windows in apartments are the first thing that guests and residents themselves pay attention to. These structures are subject to increased requirements, since they must perfectly protect against wind in winter time and open well in the summer heat. In addition, window profiles must be different long term operation, stability and reliable mechanisms.

To figure out where it is better to order plastic windows in Moscow, the rating of companies, compiled on the basis of reviews and recommendations from consumers, needs to be studied as carefully as possible. According to users, the most the best manufacturers profiles can be considered well-known companies. Some of them have opened many branches in the capital, where you can buy quality products. But do not forget about the shops where you can buy profiles and fittings from a variety of manufacturers. Let's start with the most popular outlets that received the best recommendations.

"OKNACOM"

Those who are looking for the best place to order plastic windows should definitely pay attention to this store. The company was founded back in 1996. All products are certified and have a 3-year warranty. In addition, the manufactured profiles fully meet the modern requirements of GOST. In addition to standard plastic windows, the company offers services for cold and loggias, insulation of balconies and much more. Separately, users note specialists who will not only install the structure, but also help install ebbs, window sills, mosquito nets, blinds, etc.

On the company's website you can get all necessary information, including data on the cost of profiles. Today OKNACOM offers quality products at affordable prices. For 1 m 2 of a plastic window, you will need to pay about 3.8 thousand rubles.

"Window Factory"

Where is the best place to order plastic windows? If we are talking about the capital of Russia, then you should pay attention to this store, which offers consumers a fairly extensive list of products. Here you can buy both plastic and wooden structures. The company gives a 5-year warranty on all products. Such a long warranty period indicates that the specialists of the Window Factory are confident in the quality of the profiles. Satisfied customers say the same. In addition, post-warranty service is provided for customers. However, the prices bite a little. For one double-leaf window, you will need to pay about 13.6 thousand rubles.

"Moscow windows"

This company is also often approached by people who are looking for where to order plastic windows in the capital. This store has been on the market since 1992, and during this time a large number of satisfied customers have left positive feedback about it. The product is also guaranteed for 5 years.

In this case, the buyer can order not only the installation of a new window, but also the removal of the old profile. The store's website provides a handy calculator, so customers can calculate in advance how much the purchase will cost. On average, for 1 m 2 of a profile, you need to pay about 5.1 thousand rubles.

"Window Continent"

This company has been on the market for more than 18 years, therefore, when deciding where it is better to order plastic windows, you should also pay attention to it. The assortment of the store includes not only profiles, but also doors, as well as materials for insulating loggias. The site also has a handy calculator. Therefore, the order and purchase can be carried out without leaving home. On average, the minimum order value is about 13 thousand rubles. At the same time, customers can arrange installments and receive windows immediately. If we talk about the guarantee, then it is 5 years for the product itself and 2 years for its installation.

"European windows"

This store exists on domestic market since 2002. Buyers can purchase one of four profile systems that are in common use today. At the same time, the cost of profiles is quite democratic: for 1 m 2 you need to pay about 4.8 thousand rubles. In addition, the company can order loggia repairs, glazing and insulation of balconies and winter gardens.

"Rusokon"

This store has been in existence since 2005. The company specializes in the production and sale of high-quality profile structures for affordable price. On average, you need to pay about 5.5 thousand rubles for a profile. In addition, the company is ready to provide its customers with the necessary certificates of European quality and other accompanying documents. It is also possible to pay in installments for a fairly long period of time.

When ordering glazing for an entire apartment or house, customers receive a 5 percent discount for life. Warranty for installation work and the profiles themselves is 5 years. All this applies to cheaper systems. Also in Moscow today, a huge number of branches of eminent manufacturers have been opened, where you can order high-quality products. However, keep in mind that the cost of profiles in this case will be slightly higher.

VEKA

Where is the best place to order plastic windows? User reviews advise first of all to pay attention to these profiles, which are produced by a Moscow company, which is one of the largest in all of Russia. In addition, today this manufacturer has opened a huge number of branches in many other cities. The main office of the company is located in Germany. This explains the high quality and excellent performance. window profiles.

Among other things, all products are certified according to European standards adopted in 2008. You can also note this manufacturer, pointing to the award in the form of a German quality mark, which means that this raw material undergoes strict control and meets all the necessary requirements.

It will tell you where it is better to order plastic windows in Moscow, the rating of companies. It is worth pointing out the advantages of the products of this company. Among them, stable quality and a large product line can be noted. Of the minuses, consumers singled out only the increased cost. For example, one standard profile for a window with a thickness of 70 mm will cost at least 9.5 thousand rubles. In addition, in their reviews, almost all customers noted the highest quality and good performance of the products.

In Moscow, these windows can be purchased at st. Road, house 10. Or you can go to the official website veka.ru and order delivery.

REHAU

We continue to study the list of companies that helps to figure out where it is better to order plastic windows in Moscow. Another German company, REHAU, receives positive feedback. These products also have a rather high price category. However, this is a company that has been manufacturing window profiles in the Russian Federation since 2002.

Factories are open in many cities of Russia, including the capital. REHAU plants use exclusively modern equipment. All finished products meets quality requirements and is accompanied by the necessary certification from international experts. Among the main advantages of this manufacturer are quality, a long warranty and a huge selection of models. Do not know where to order plastic windows in the company "Rehau" will be useful in this matter. Almost all customers have identified a fairly high cost of products. However, users also noted that this product worth the investment.

Where is it better to order plastic windows in Moscow? You can buy these profiles in almost every district of the capital. For the convenience of users, a map of Moscow is presented on the company's website, on which all REHAU stores are marked.

SALAMANDER

This is another German company, but it is considered a kind of "middling". The manufacturer received this status due to the average level of sales in Russia. However, it should be said right away that this is due to the crazy cost that the seller breaks. A standard profile with a thickness of 76 mm will cost about 26 thousand rubles. Therefore, it is not surprising that the level of sales in Russia is rather low.

However, this does not indicate the quality of the product. When deciding where it is better to order plastic windows, you should not discount this company. Quite the opposite: this product meets all the requirements and commands respect. In addition, many users have noticed the excellent design of the products. The manufacturer not only provides all the necessary certificates, but also provides control of dealers by a company from Germany.

The central office of the manufacturer is located on Pervomaiskaya street, house 4. Here you can order products and see product examples.

What to look for when installing plastic windows

This is also an equally important issue. The fact is that it is not enough just to decide where it is better to order plastic windows, you must also take into account the features of the installation. If an outright hack is engaged in the installation, then even the most best design will start to fall apart after a while. Therefore, it is recommended to trust such work only to proven specialists. Before installing windows, you should talk to your neighbors and find out exactly where they ordered this or that product and who installed it. Otherwise, there is a risk of getting high-quality profiles, which in a few years will begin to creak, deform or function very poorly.

You need to understand that, by and large, the profile is the simplest plastic structure, which, although very important for window blocks, still, when choosing it, you need to pay attention to fittings. It will depend on her how long the window will last, how well it will open and close. It is also worth paying attention to the double-glazed window itself, which must be manufactured in accordance with technological requirements and other recommendations.

Plastic windows are the most popular choice. They are durable, sound-isolating, easy to care for, and thermal insulation properties especially important in continental climates, with hot summers and harsh winters.

What plastic windows are better to choose for an apartment? This question will help answer rating of plastic windows by quality, compiled in 2018 based on user reviews from the sites Irecommend and Otzovik.

Also, when compiling the window hit parade, such criteria as the longevity of the company, the popularity of products, the quality of service and, of course, the price were taken into account.

The cost of a double-leaf window is from 7,500 rubles.

Opens the rating of the best plastic windows "Panorama" - one of the oldest manufacturers of plastic windows on Russian market, which has been afloat for over 20 years. Over the years, the St. Petersburg company has glazed more than one and a half million square meters. So far, only one thing upsets users - that the company's service is so unobtrusive that it is difficult to get information about possible options.

The cost is from 14,000 rubles.

SOK, or Samara window structures" was founded in 1999. The company does not have its own production, and the profiles are manufactured under the patronage of the German concern Profine. In the rating for the quality of profiles for plastic windows, manufactured Profine KBE profile is considered one of the best, they have many accolades for durability and strength. Cons: windows may turn yellow, possibly due to a violation of technology at the Russian manufacturing plant.

Today, there are a huge number of window products on the market. Which plastic windows belong to the category of the highest quality and how the products differ high class from cheap fakes? When choosing plastic windows, you need to be guided by the main characteristics and reputation of the manufacturer. The cost of products does not always correspond to its quality, since sellers often unreasonably overestimate the price. Also, do not overpay for those design features that you will not need in your conditions. What you need to know about plastic windows in order to choose a quality product?

The main characteristics of plastic windows

Plastic windows consist of the following elements:

• window block and frame (profile) made of PVC;
• double-glazed windows (glass chambers);
• sealant;
• window fittings.

Each component has specifications on which the performance of the window as a whole depends. Let us dwell in more detail on what indicators each of the elements should correspond to.

Attention!

High-quality PVC windows are produced under the control of ISO 9001 and have a corresponding certificate.

Profile

The profile made of high quality polyvinyl chloride is resistant to mechanical, chemical and thermal influences. Its service life is 50 years.

What indicators determine good profile PVC? Before choosing a manufacturer, read the main characteristics of the product.

• Profile width. It all depends on purchasing power. The wider the profile, the better and warmer it is. One caveat: a wide profile should have more stiffeners, otherwise the strength of the product will suffer.
• Number of thermal insulation chambers. For good thermal insulation, it is better to choose a profile with at least 5 chambers. In areas with very low winter temperatures, it is better to consider options where the chambers are filled with an inert gas.
• Reinforcement. For rigidity, the PVC profile is reinforced from the inside with steel inserts. A solid contour is more durable, but if heat-insulating properties are a priority, then it is better to install windows with an open contour - they are warmer.
• The country of origin of the profile. German products are traditionally considered to be of high quality. But often such windows are produced in Russia using German technology. In this case, the price should be lower.

How to choose a double-glazed window?

A double-glazed window is chosen in accordance with the requirements necessary for your conditions. Here are some designs of double-glazed windows:

• single-chamber - two glasses;
• two-chamber - three glasses;
• three-chamber - four glasses.

An important detail is the thickness of the glass and the distance between the glasses. The larger this value, the better the heat and sound insulation characteristics of the window. Average optimum thickness glass fluctuates around 4-5 mm (the outer one can be thicker than the inner one), and the distance between them is about 10-16 mm with a total thickness of at least 30 mm.

In addition, the cost of the window will be higher if glass with advanced features is installed:

• energy saving;
• armored;
• sun protection;
• reinforced;
• hardened;
• self-cleaning.

Profile color is traditionally white. If you choose poor quality PVC, it can fade in the sun and acquire a yellowish tint. In addition to white, you can put windows in other colors. In this case, the paint is applied to the surface of the profile or added directly to the plastic mass during the manufacturing process. There is an option like lamination - a painted film is glued onto the profile.

What is a sealant?

The sealant plays a significant role in thermal insulation and participates in the drainage system, ensuring the tightness of the window. It should go along the perimeter of the valves and fit snugly on both surfaces. The following materials are used for its production:

• rubber;
• silicone;
• special rubber;
• rubber-plastic.

The material must be elastic, soft, but resilient, resistant to external influences. It is better to install a seal made of ethylene-propylene-thermopolymer-rubber (EPDM).

Choosing accessories

Fittings provide opening of the window sashes. Putting good fittings means extending the life of the window as a whole and protecting yourself from unpleasant surprises. The opening mechanism can be simple - rotary, or more complex - tilt-and-turn; with slotted opening (winter ventilation). High-quality fittings are made from high-strength grades of alloy steel. At the request of the client, anti-burglary fittings, handles with a lock and a lock, hidden linings against drilling can be installed on the windows.

Good fittings are resistant to corrosion, have a smooth ride and an optimal ratio of metal and plastic in the design.

The leading manufacturers of fittings for plastic windows include the following companies:

• Siegenia-Aubi;
• Roto;
• Maco;
• Winkhaus.

window design

The cost of PVC windows directly depends on their design. There are rectangular and square windows, you can put profiles in the form of arches and semi-arches, hinged and sliding models, with fixed and opening doors. Large windows are mounted from several glasses, separating them with spross from aluminum profile. Modern manufacturers are ready to fulfill any whim, of course, for your money. The more non-standard window you want to put, the more opening and rotary mechanisms, the higher the final cost of the product.

Manufacturers and prices

Which manufacturers are considered the best? In Russia, about ten companies producing PVC windows have proven themselves well. Products of both domestic and foreign production are in demand. All of them occupy their niche in the price-quality ratio, which makes it easy to choose the right option.

• VEKA profile, Naro-Fominsk district, Gubtsevo village. The products have been awarded the German quality mark, and production control is carried out under the auspices of European technologies. The undoubted advantages of VEKA windows include stable quality and a wide range of products. The disadvantages are the high cost, which is determined not so much by the quality as by the brand.

• REHAU profile, Gzhel. Today, the company is the leader in the Russian sales market in terms of the number of products produced. pros REHAU profile: high quality and manufacturer's guarantees, a wide range of products. The disadvantages include the high cost of products.
• Profile KBE (KBE), Voskresensk. Another German company engaged in production in Russia. At the same time, along with the high quality characteristic of the first two manufacturing companies, KBE profile Today it has a slightly lower price, which is explained by successful marketing moves.

These manufacturers occupy leading positions in the plastic window market. In addition to them, the following firms are included in the top 10 with varying success.

• SALAMANDER profile, Türkheim, Germany. Pros: European quality control, dealer control by the manufacturer, profile design. Cons - the cost of production.
• Profile "Mont Blanc", Elektrostal. The advantages include: low cost, large assortment, product quality. Cons: No ISO certification.
• Profile Kaleva, Moscow. Pros - great design, full cycle production. Cons - no quality management certification.
• Profile Proplex, Podolsk. This Russian company which created a full production cycle. Advantages of the profile: low cost. Disadvantages - outdated designs, lack of international certification.
• Profile Deceuninck, Belgium, branch - Protvino.
• SOK profile, Syzran. The company does not have its own profile, but manufactures it at the plant of the Profine concern (KBE). Windows are characterized by traditionally high European quality, but a small selection and unreasonably high cost of finished products.

In general, to the question “which windows are better to install?” there cannot be a clear answer. It all depends on the conditions in which they will be used. For residential premises, for areas with low winter temperatures, more expensive designs are chosen, and in other cases, you can save on the number of cameras and double-glazed windows, fittings and glass characteristics. Before installing windows, they determine for themselves the characteristics that they must meet, and turn to leading manufacturers with a good reputation and all relevant quality standards documents.