Ferroli gas boiler: types, instructions and reviews. Ferroli - gas boilers. Scheme, instruction manual, reviews Main error codes

Italian gas boilers Ferroli heating systems are very popular due to their reasonable cost, a wide range of products, as well as full adaptation to domestic operating conditions.

Ferroli produces eleven main models of gas-fired heating equipment, as well as 30-40 modifications that differ in the principle of operation, performance and other technical characteristics.

Equipment Specifications

In order to decide on the choice of a suitable Ferroli heating boiler model and narrow the search circle, several main technical characteristics can be distinguished. It is customary to divide equipment into several categories according to the following features:

Condensing boilers are connected to a horizontal coaxial chimney. Models with closed combustion chambers are connected to the power supply system of the house. Air intake, removal of combustion products is carried out forcibly with the help of fans.

Mounted condensing boilers

The quality of Ferroli boilers is especially evident in condensing equipment, the efficiency of which reaches 109%. The principle of operation is based on the use of thermal energy of steam resulting from the combustion of blue fuel.

The flue gas temperature is used to generate additional heat, and does not go into the chimney as in conventional models.

Condensing wall-mounted double-circuit and single-circuit gas boiler Ferroli with a closed combustion chamber has the following features:

The sensitive burner in condensing boilers is capable of operating at low gas pressure. As a heat carrier in the heating system, you can use water or non-freezing liquid (antifreeze).

Wall mounted boilers with atmospheric burner

Atmospheric boilers are a classic design that provides for an open combustion chamber and a burner, the air to which is supplied by natural circulation. The intake of air masses is carried out from the room used for the needs of the boiler room.

The advantage of atmospheric Italian wall-mounted single-circuit and double-circuit gas heating boilers Ferroli is the simplicity of design. The disadvantages are higher gas consumption and lower productivity.

Installation of a hinged atmospheric type boiler is quite simple. Equipment provided important nodes that affect the performance of the system. Expansion tank, circulation pump, gas valve and burner are included in the basic package and are already installed in the boiler body.

Electric or piezo ignition available. The second option is more economical, since the pilot burner turns on only when the flame is attenuated.

Floor atmospheric boilers

floor standing non-volatile boilers Ferroli brands are presented in several modifications, among which Pegasus models are popular. These models are distinguished from similar equipment by the following technical characteristics:

Floor-standing gas boilers Ferroli Pegasus have permission from Gosgortekhnadzor and a certificate of conformity that allows the installation of equipment for domestic and industrial purposes.

Advantages and disadvantages of Ferroli products

Ferroli has been cooperating with Russian suppliers and sellers of heating equipment for several decades. During this time, according to the feedback from buyers of equipment, it was easy to track all the advantages and disadvantages of gas boilers.

Advantages - installation and installation is carried out quickly. A competent specialist will be able to adjust the ignition and gas flow, connect an external and room temperature sensor, and set the necessary work program. Start-up and regulation can subsequently be corrected automatically using automation. Another advantage is the economy and high efficiency of condensing boilers.
Disadvantages - requires constant and proper care for hinged volatile boilers. Mandatory seasonal service. Often, if the gas valve is not properly adjusted, there is a significant excess fuel consumption. The automation board burns out at the slightest power surge (you need to connect a UPS).

The first start-up of the boiler must be carried out by a Ferroli representative who sells heating equipment. He will put the station under warranty and explain the operating conditions.

Boiler selection according to requirements

In order to select the most suitable boiler in accordance with the technical characteristics of the building and current regulations, regarding installation gas equipment attention should be paid to the following:

Performance- the calculation is performed according to the formula 1 kW = 10 m² of heated area. If an indirect heating boiler is connected, a power reserve of 10-15% is required.
Autonomy of work- Ferroli manufactures both fully automatic stations, in which even the temperature setting is controlled by a microprocessor, and conventional boilers with mechanically heating adjustments.
Number of circuits- double-circuit units can heat water for hot water supply and heat carrier for the heating system. Boilers with one circuit are installed in rooms with a large heated area in cases where at the moment there is no need to obtain hot water.

Ferroli gas boilers are good economical equipment, fully adapted to domestic conditions. The cost per station is lower than for the German or Czech model. Specifications and the possibilities are not inferior to those that boilers of well-known European brands have.

When choosing heating equipment for heating our home, we strive to make smart choice between the reliability of the purchased equipment and its cost. To do this, we choose products from the most reliable and well-known brands. If you buy equipment from market leaders, you should pay attention to Ferroli gas boilers. They are distinguished by the maximum level of reliability and meet the most stringent quality and safety standards. In this review, we will talk about the most popular models and introduce you to user reviews.

Ferroli gas boilers and their features

Ferroli has a history of more than 50 years. Having started its journey as a simple workshop, at the moment it includes 14 factories for the production of heating equipment. Its products are known in many countries of the world. Today she produces:

Wall mounted gas boilers;
Boilers of condensing type;
Floor heating units;
Accessories and auxiliary equipment;
Radiators and more.

Ferroli Italian gas boilers are distinguished by the highest degree of safety, which is dictated by many European standards. The choice of consumers is offered a variety of model lines, including successful and popular models.

When developing heating equipment, Ferroli specialists strive to create gas boilers that can serve for years, differing the minimum amount breakdowns and operational problems. They use reliable heat exchangers with high level corrosion resistance, efficient burners and reliable electronics with user-friendly controls.

Popular Models

In this section, we will consider the most popular models of Ferroli gas boilers - these are popular single-circuit and double-circuit samples with one or two circuits, as well as with open and closed combustion chambers.

The Ferroli Arena C24 wall-mounted gas boiler is a 24 kW double-circuit heating unit with an open combustion chamber. It can heat rooms up to 240 sq. m, spending no more than 2.73 cubic meters. m of gas per hour. It is also possible to work from sources of liquefied gas - in this case, fuel consumption will be 2 kg / h. The power of the equipment is regulated over a wide range - from 7.2 to 24 kW, carrier temperature - from +30 to +85 degrees, water temperature in the DHW circuit - from +40 to +65 degrees. The capacity of the hot water circuit is up to 13.7 l / min.

An important advantage of the Ferroli Arena C24 gas boiler is the presence of a copper primary heat exchanger. The second heat exchanger is made of equally durable of stainless steel. Inside there is already all the necessary piping - this is an expansion tank with a volume of 7 liters, a circulation pump, a safety valve and an air vent. Also on board are all necessary systems security.

For more convenient control, in addition to this model, it is recommended to buy an electronic room thermostat.

Mounted boiler Ferroli Atlas D can hardly be called gas. This is a universal model, as it can work not only on gas, but also on diesel fuel. The basis of the unit is a hardy cast-iron heat exchanger with powerful thermal insulation made of mineral wool. The model is single-circuit, its thermal power is 30 kW, which is enough to heat an area up to 300 square meters. m. To put the unit into operation, you must purchase a mounted burner - diesel or gas.

The main features of the gas boiler Ferroli Atlas D 30:

Low power consumption - only 5 W;
Convenient control panel;
Ability to connect external panels and programmers;
High level of efficiency - up to 95%;
The temperature of the coolant in the heating system is up to +95 degrees;
Possibility to connect and control an indirect heating boiler.

The hinged gas boiler Atlas D 30 from Ferroli from Italy is a reliable solution for heating buildings for any purpose.

If you want to choose a good heating unit for a large dwelling, we recommend that you pay attention to wall boilers Ferroli condensation type. They will delight you with an appropriate level of reliability and a high level of efficiency. And before us is a typical representative of this category - this is the Ferroli Bluehelix Tech 35A model. The unit is single-circuit, with a closed combustion chamber. Its power varies from 6.6 to 34.1 kW with a maximum gas consumption of up to 3.68 cubic meters. m/hour.

The Ferroli Bluehelix Tech 35A gas boiler is built on the basis of a stainless steel heat exchanger, which determines its resistance to corrosion. You don’t need to buy additional piping - there is already an 8-liter expansion tank, a circulation pump and a safety group on board. The device is characterized by high efficiency, since it works according to the condensation scheme. The possibility of joint work with a solar collector is also implemented.

The disadvantage of the unit is its high cost, which is approximately 65 thousand rubles - such high prices are typical for all condensing gas boilers from the Ferroli company.

single circuit heating boilers Ferroli Diva series are made on the basis of copper heat exchangers and are equipped with informative control systems with LCD displays. One of the popular representatives of this model range is the Diva C 13 unit. Its thermal power is 13 kW, gas consumption is up to 1.51 cubic meters. m/hour. It is also possible to work on liquefied gas with a consumption of up to 1.12 kg / h. Despite the fact that a simple control panel is provided on board the device, it is most convenient to use an external thermostat.

The Ferroli Diva C 13 gas boiler is equipped with an electronic flame modulation system, a thermometer and a pressure gauge are located on the front panel to control the most important parameters heating system. Inside we will find an expansion tank with an increased volume (10 liters), a low-noise circulation pump, an automatic air vent and a safety valve.

Many consumers give their preference not to wall units, but to floor units, believing that the latter are distinguished by an increased level of reliability. And this is true, because cast-iron heat exchangers are often used here. A popular representative of the family of floor single-circuit gas boilers from the Italian company Ferroli is the Pegasus 23 model. Its heart is a heat exchanger made of corrosion-resistant cast iron. Thermal power adjustable from 8.8 to 23 kW, fuel consumption - up to 2.68 cubic meters. m/hour.

The floor-standing gas boiler Ferroli Pegasus 23 is suitable for heating buildings for any purpose - these can be small cottages, administrative or industrial buildings. The combustion chamber in this model open type, a thermometer with a pressure gauge is provided on board, there is no piping. For more convenient control, it is recommended to connect an external control module - a room thermostat.

The average cost of this unit for domestic market varies between 46-50 thousand rubles, which is associated with the use of a cast-iron heat exchanger.

Before us is a simple heating gas boiler from the Italian company Ferroli, which is distinguished by its affordable cost - it is about 22-23 thousand rubles. The model is a double-circuit, built according to the scheme with a closed combustion chamber. Its power is 7.2 kW, the performance of the DHW circuit varies between 11.3-13.7 l / min when the water temperature changes by 30-35 degrees. Natural or liquefied gas is used as fuel - in the latter case, the equipment will need to be reconfigured.

The Ferroli Fortuna Pro 16 gas boiler has a high level of efficiency - it reaches 93.1%. The primary heat exchanger is made of copper, which is already a big plus. The secondary heat exchanger is made of stainless steel. For convenient control of operating parameters, there is a miniature liquid crystal display with blue backlight on board. It is also possible to connect external room thermostats.

This unit is interesting not so much for its condensing operation scheme, but for its flexible settings. The temperature of the coolant is regulated here within a gigantic range - from +20 to +90 degrees. The thermal power of the unit varies from 3 to 18 kW. The heat exchanger is made of durable aluminum alloy characterized by low inertia and an acceptable level of reliability. Max Flow fuel is 1.9 cubic meters. m/h for natural gas and up to 1.41 kg/h for liquefied gas. The pressure in the heating circuit should not exceed 3 atmospheres.

The wall-mounted gas boiler Ferroli Econcept Tech 18 A is designed to work in private households and apartments. It is equipped with a variety of security systems, self-diagnosis, automatic air vent, safety valve, pump blocking protection, electronic flame modulation and a simple control system with a small display. The gas boiler from Ferroli received excellent user reviews, which indicate the absence of problems in operation and the reliability of the equipment.

The heating equipment segment is currently in transition. This is due to the emergence of new concepts and technologies for the development of units, as well as the introduction of electronic control systems. Boiler devices have always been considered the basis of this group of equipment. With the help of such installations, it is possible to provide heat and a small a private house, and industrial premises. The buyer is offered a fairly wide range of options to choose from, including the Ferroli gas boiler in different versions. Italian company has been known in Europe for more than 50 years, and for the last 20 years, Russians have also been getting acquainted with its proposals. The manufacturer strives not only to maintain the most successful technological achievements introduced during its activity, but also to actively improve products with modern developments.

Features and benefits of Ferroli boilers

Of course, this is not the only manufacturer using new technologies. Therefore, in a competitive environment, engineers strive to offer effective solutions in the most different directions. First of all gas Ferroli provides the required level of performance, spending a minimum amount of fuel. Together with automated control and the ability to control temperature conditions this allows the owner to optimize heating costs. By the way, about automation: the manufacturer also provides for the possibility of self-diagnosis of boilers, which is very important for users without technical training.

It is for Russian customers that the company adapts models to harsh operating conditions. Poor water quality and voltage fluctuations sometimes become the main problem of heating equipment. In turn, it is completely ready for use in such conditions: according to the manufacturer, the service life of the equipment is more than 40 years.

wall models

This is one of the most common types of boiler equipment, which in the line of the Italian brand is represented by models Diva, Divatop Domina, etc. Thanks to affordable price and uncomplicated design, the Arena model is in the greatest demand. This is a Ferroli gas double-circuit wall-mounted boiler, which has two heat exchangers. The combustion chamber for such models can be open or closed, depending on the modification. The design itself allows for high heat transfer, but there are other advantages of boilers of this type precisely in the idea of Italian designers.

In particular, developers use a primary heat exchanger made of copper, and its secondary counterpart is made of stainless steel. Branded parts are also used as components. For example, a valve from a three-speed circulation pump is a WILO brand. To ensure stable operation, the Ferroli gas double-circuit boiler is equipped with a control board that is resistant to network fluctuations. Together, these components ensure high reliability of the equipment and safety during operation.

Units for floor installation

This variety is represented by the Pegasus and Atlas series in various modifications. As a rule, these are cast-iron units supplied with atmospheric or mounted burners. The advantages of such models are well illustrated by the Ferroli floor-standing gas boiler in the initial version - Pegasus. The model is equipped with a cast iron heat exchanger, Honeywell valve, single-stage burner, signal contact, as well as connectors for the circulation pump and connection room thermostat. To facilitate operation, the developers have provided electric ignition and the possibility

It is worth noting the security features. The boiler has a smoke control, an ionization sensor for the flame, and also suggests the ability to monitor overheating using a Ferroli bimetallic indicator. This category also has an additional option. It is enough to note the cascade control unit, connection means remote thermostat and turbo nozzles.

Condensation models

Condensing type equipment from Ferroli is available in the Econcept, Energy and Bluehelix series. These are already single-circuit units, among which there are options for increased power. For example, the Econcept model is capable of delivering up to 300 kW. The features of condensation devices include the presence of a large liquid crystal display. In addition, the Ferroli gas wall-mounted boiler in the Econcept series has an aluminum heat exchanger and a ceramic burner. The use of these materials is due to lower safety requirements. Actually, the purchase of a condensing unit is beneficial in terms of broad functionality and improved ergonomics. The user will be able to view all the main operational parameters, use the boiler modes depending on the season, and control the connected boiler using a remote control.

Accessories

For each category of boilers, the manufacturer also provides additional accessories. In particular, wall models double-circuit type can be supplemented with a kit for smoke exhaust systems and devices that allow the equipment to operate on liquefied gas. In turn, the Ferroli floor standing gas boiler can be equipped with boilers, hot water priority systems, turbo nozzles and devices for cascade control. Condensing units have the largest range of additional options. They can be provided with outdoor temperature sensors, control boards for multi-circuit systems, hydraulic switches, a mounting manifold frame, as well as special sets of fittings for connecting boilers.

User manual

Most Ferroli models are equipped as standard or optionally equipped with automated controls, which make operation easier. The user sets the modes and configures through a special panel. To start the equipment, it is necessary to open the burner and perform ignition. But before that, you should turn on the unit in the network, and then press the special start button, which is equipped with a Ferroli gas boiler. The instruction also provides for a situation in which the start of the equipment will not work. If the boiler does not start within 15 seconds, the system must be restarted. The boiler should be turned off not only by closing the valve and turning it off with the button. It is recommended to disconnect the unit from the mains, but it is important to consider that in this state the boiler will not be protected from freezing. To avoid this, either drain the water or add antifreeze to it.

Maintenance instructions

In order to keep the boiler in good condition, the user must regularly clean the appliance casing with rags and soapy water. At least once a year, a complete technical inspection must be carried out. Combustion analysis is also recommended. It is important to monitor the operating parameters on which the Ferroli gas boiler operates. The instruction instructs the owners of the equipment to carefully monitor the indication of malfunctions. Most cases of incorrect operation of equipment are due either to voltage drops or to a lack of gas. It is recommended to contact the service center only after the elimination of such problems and the next check of the boiler.

Construction and adjustment of Ferroli Domina gas boilers

The wall-mounted gas boiler Ferroli Domina F24 E with a copper heat exchanger for heating and hot water, with electronic ignition and flame control is a new high-performance device, with a closed combustion chamber (all the air entering the heater is taken from outside the room), running on gaseous fuel.

The Ferroli Domina F24 E boiler is designed to produce hot water for heating and hot water supply. The unit uses advanced technological systems such as electronic regulation, control and safety devices.

A distinctive feature of the device is the built-in electronic device for ignition and combustion control, which provides fully automatic and safe work burners.

Fig.1. The device and elements of the boiler Ferroli Domina F24 E

5 - Sealed chamber, 7 - Gas inlet, 8 - Sanitary water supply, 9 - Sanitary water inlet, 10 - Heating system supply, 11 - Heating system return water inlet, 14 - Safety valve, 16 - Fan, 19 - Combustion chamber , 20 - Burner assembly, 21 - Main nozzle, 22 - Burner, 26 - Combustion chamber insulation, 27 - Copper heat exchanger for the system central heating and DHW, 28 - Flue gas collector, 29 - Flue gas outlet, 32 - Heating system pump, 34 - Heating system temperature sensor, 36 - Automatic air vent, 42 - DHW temperature sensor, 43 - Air pressure sensor, 44 - Gas valve , 49 - Safety thermostat, 50 - Heating limit thermostat, 56 - Expansion tank, 63 - Heating system temperature regulator, 73 - Freezing temperature thermostat, 74 - Filling cock, 81 - Ignition electrode, 82 - Flame control electrode, 84 - Primary gas valve regulator, 85 - Secondary gas valve regulator, 90 - Flue pressure tap 91 - Air pressure tap, 98 - On/Off/Restart switch, 114 - Water pressure sensor, 132 - Flue gas deflector, 136 - Flow meter, 145 - Pressure gauge, 157 - Domestic hot water temperature controller, 187 - Diaphragm flue gas outlets

Differential air pressure sensor

The air differential pressure sensor is a safety device, it allows the burner to be ignited only after checking the operation of the fan.

If the difference between the pressure of the outgoing combustion products and the incoming air is not equal to the minimum calibration value of the sensor, then the sensor contacts will remain open and the gas valve will not open.

In addition, the electrical circuit of the boiler is designed in such a way that if the pressure sensor contacts remain closed when the fan stops, the burner will not start.

The principle of operation of the gas boiler Ferroli Domina F24

The Ferroli Domina boiler is suitable for operation on two types of combustible gas: methane or propane (liquefied gas).

The gas mode for operation is selected when ordering or changed at the installation site. The boiler works with advanced systems: electronic control, safety and control equipment.

When the room thermostat calls for heat, the pump and burner are switched on. With the help of an electronic flame modulation system, the boiler output is gradually changed until the set flow temperature is reached.

If the power required in the heating system is lower than the minimum power of the boiler, when the flow temperature exceeds the set value, the burner is switched off and the electronic system allows it to be switched on only after 2 minutes.

When the temperature set on the room thermostat is reached, the burner switches off and the circulation pump continues to operate for another 5 minutes to ensure better heat distribution in the system.

If hot water is drawn for the domestic hot water system during the heating phase, the electrical circuit heating and the hot water circuit is switched on.

Throughout this stage, the circulation pump of the heating system stops, and the Ferroli Domina boiler supplies water at a set temperature.

The device maintains the water temperature of the water supply system constant, even when taking different quantities, by modulating the torch.

Every time the domestic hot water production ends, the heating pump starts for one second to prevent it from blocking, especially in summer.

Adjustment of Ferroli Domina boilers

Main burner pressure and flow adjustment

Wall-mounted gas boiler Ferroli Domina works on the principle of flame modulation. The system has two fixed pressures, minimum and maximum, which must be the same as indicated for each type of gas.

Adjusting the minimum pressure must be done first to ensure correct ignition of the burner. After that, the maximum pressure is adjusted. Any changes to the minimum pressure affect the maximum pressure value.

Minimum and maximum pressure adjustment with Honeywell V K4105G gas valve:

Connect a suitable pressure gauge to the pressure tap downstream of the gas valve.

Disconnect pressure compensator.

Remove protective cap.

Set the potentiometer (on the main panel) to the minimum value (counterclockwise).

Operate the Ferroli Domina boiler in heating mode.

Adjust the minimum pressure by turning the screw clockwise until the desired value is obtained.

Set the potentiometer (on the main panel) to the maximum value (clockwise).

Adjust the maximum pressure by turning the screw counterclockwise until the desired value is obtained.

Connect pressure compensator.

Replace the protective cap.

Adjustment maximum power heating systems:

This adjustment is carried out only on the electronic board with the adjusting screw R3, starting from a system temperature below the maximum of the regulating thermostat (system temperature 50-60°C).

Connect a special pressure gauge to the pressure tap located in front of the gas valve; turn the temperature control screw to the maximum value, then set the desired pressure value.

At the end of this operation, turn on and off the Ferroli Domina boiler 2-3 times using the thermostat. At each start, check that the pressure corresponds to the set value and that the burner ignites correctly.

If necessary, make additional adjustments until the pressure stabilizes at the set value.

When igniting the burner for control set pressure the control thermostat knob must be set to the maximum value, otherwise errors will occur.

Adjusting the temperature of the heating system and the room:

The water temperature of the heating system is regulated by turning the corresponding knob.

Turning the knob clockwise increases the temperature of the heating water, and turning it counterclockwise decreases it.

The temperature can vary from a minimum of 35°C to a maximum of 85°C. We recommend not to operate the Ferroli Domina boiler at a temperature lower than 45°.

The room temperature is controlled by setting the room thermostat knob to the desired value.

The thermostat automatically controls the boiler, temporarily cutting off the power line, depending on the heat demand of the room.

__________________________________________________________________________

_______________________________________________________________________________

__________________________________________________________________________

OPERATION AND REPAIR OF BOILERS

Proterm Panther

Ferroli, a manufacturer of gas heating equipment, produces devices that meet European quality standards and have a CE certificate, i.e. made in accordance with all the rules and requirements of GOST. The specialists of the manufacturing company are constantly striving to improve the performance and improve the heating equipment as a whole. Read the instruction manual for the gas boiler Proterm Panther.

Technical characteristics of Ferroli boilers

Ferroli gas boilers operate on natural and liquefied gas. Heating equipment is incredibly easy to use, because all the elements are freely available.

It is possible to control the devices both using the control panel on the body of the heater, and using the remote control panel. Boilers are easy to install and operate.
The units have a high level of efficiency - 93%.
Due to the modernized control system, the devices have high performance and provide self-diagnosis of the system.
Ferroli equipment has a small weight and dimensions.
The device is reliable and safe.

Types of Italian gas boilers Ferroli

The most common models of Ferroli boilers are the following models:

gas boiler Ferroli Diva - a wall-mounted boiler, has electric ignition and the functions of heating and heating water.
Ferroli Domina gas boiler - a wall-mounted boiler, available with both open and closed combustion chambers.
Ferroli Divatop gas boiler is the most progressive model, which is distinguished by a huge number of innovations. Has a high level of performance.

Types of gas double-circuit wall-mounted boilers Ferroli:

gas floor boiler Ferroli pegasus d 45
gas boiler Ferroli Diva f24 - a boiler with a closed combustion chamber, easy to install. It has a beautiful elegant design;
the Ferroli Comiproject f24 and c24 boilers are equipped with the latest intelligent control board; they differ only in the type of combustion chamber: (f) - closed, (c) - open. The Ferroli Comiproject boiler is the experience of the past years and progressive control systems, which together give unique design and reliability.
Ferroli f30d gas boiler is a wall-mounted gas boiler with forced draft and a copper heat exchanger. Type of combustion chamber - closed.
gas heating boilers Ferroli 200 kW - a double-circuit heater with a built-in boiler.
Gas equipment has an anti-blocker pumping system hot water supply and heating circuit.

The boilers are equipped with a frost protection system.

Installation and connection of the Ferroli boiler

It is necessary to install and connect heating equipment in accordance with all GOSTs. It is necessary to take into account the requirements that apply to the premises. It should be:

The installation of the device intended for space heating must be carried out by a specialist technical service support, despite the ease of use, the unit must be harmatana embedded in the heating system, because poor-quality installation can lead to irreversible consequences.

Ferroli boiler instruction manual

The most popular problems faced by the user:

error f37 of the ferroli boiler - low pressure level (check the gas and water supply, clean the system)
the ferroli gas boiler does not turn on (you need to pull the plug out of the socket and after a few minutes re-insert it, if nothing has changed, you should contact the master for help);
the water pressure in the Ferroli gas boiler drops (the water supply system should be checked, perhaps a blockage has formed in one of the nodes);
something rumbles inside the Ferroli gas boiler - this type of malfunction should be fixed with the help of a wizard. And this must be done as quickly as possible.

Spare parts for gas boilers Ferroli

In the event of a breakdown, components for Ferroli gas boilers can be replaced, for example:

gas burners for Ferroli boilers are often made of steel, have high wear resistance, can be damaged due to mechanical stress;
a heat exchanger for a Ferroli gas boiler - when using boilers with such a heat exchanger, it is imperative to soften the water;
room thermostat for the Ferroli gas boiler, all these elements can be changed to others.