In everyone's life, a situation is possible when he finds himself at the entrance with an intercom without the ability to enter. This could be his own entrance. You never know. Maybe I lost the keychain, or maybe it has become unusable. At such a moment, knowledge of code is an urgent necessity.
Our article will help you open a door with an intercom without a key.
Opening codes for intercom without a key
An intercom is usually installed to protect the entrance from the presence of strangers. And since it is a security device in itself, manufacturers put a lot of effort into protecting it from possible hacking. So the use of any codes is possible only if the factory settings are preserved.
But remember, using codes to open intercoms without a key for personal gain is a criminal offense. Therefore, use this information only in situations of extreme necessity.
How to open a door without a key from an Eltis intercom
The devices of this company are distinguished by the rare simplicity of factory codes. One of these codes may be suitable to unlock the lock:
If the combinations do not work, try replacing “100” with “200”, “300”, etc.
If these combinations do not work, use the recommendation for Cyfral.
How to get into the entrance with a Cyfral intercom
When there are apartments with numbers divisible by 100 in the entrance with the Cyfral device, there is a chance to open the intercom using the code:
Devices Cyfra with "M" in markings open:
Cyfral CCD-2094M opens via menu:
- First, “0000” and the “Call” button.
- Then “123456”, “Call” or “456999”, “Call”, or “123400”, “Call”.
- Wait 5 seconds.
- If/(when) one of these codes matches, “F0” will appear on the display. It means that the device has switched to the mode we need.
- Now - “601”.
And the door can be opened.
It is worth highlighting model CCD-2094.1M. It differs from other devices in this line by the presence of a constantly lit or flashing dash on the display. It's more difficult with her.
- The lock opens.
- “ON” will light up – this means you have entered the menu. Press “2”, and – congratulations – you have opened the door to the entrance with an intercom.
- It says "OFF". This means the settings have changed.
How to open a Vizit intercom door
But Vizit devices boast a variety of not only model range, but also special codes. Finding the right one, even with working factory settings, may not be easy.
In addition, in some models the “*” button is replaced by “C”, and “#” by “K”.
So, the codes to open Vizit intercom:
If their thoughtful search does not bring any results, you will have to go the long way - through the system service menu:
- "#999".
- Wait for the sound signal (two “squeaks”).
- Enter the master code, “1234” to start. The device should beep again. If the code is incorrect, the sound produced by the device is two-tone, and you’d better try other combinations:
Once you enter the menu, you can:
- Open the intercom without a key with the code “2” – pause – “#” – pause – “3535”.
- Or program the key fob.
For programming:
- Press "3".
- Bring the tablet key to the reader.
- Press "#".
- Wait for the beep.
- And from now on, your key will open this intercom door.
Key “*” – exit the mode.
It will be more difficult with the “Vizit” BVD-3xx. It has neither a monitor nor any indication.
According to the algorithm described earlier, you will need to enter the service menu and unlock the lock by pressing “1”.
How to open a Metakom intercom
The company produces digital addressing units (intercoms) and calling subscriber panels.
First, let's look at how you can open an entrance with a Metacom intercom without a key.
- “Call”, enter the number of the first apartment in the entrance, and press the call button again.
- “COD” should light up on the screen.
- Press "5702".
If it doesn't work, try two other schemes:
The Metakom MK-20 M/T model is not software protected from the master key. Therefore, if you attach a “clean” key fob to the reader, it will immediately go into programming mode. In the absence of a key fob, you will have to deal with the keys. Codes:
You can see the method of opening a door with a subscriber panel for 20 subscribers in this video:
How to open a Factorial intercom door without a key
And although from the point of view of factory settings Factorial is very similar to Cyfral, the mandatory change of special codes by installers spoils the whole picture.
Still try:
Codes: how to open the T-Guard intercom without a key
But no one, except overly conscientious installers, worsens the statistics of this manufacturer:
It is important to make the last presses of the call button quickly.
Open the intercom lock Barrier without a key
If you come across this old intercom, you are lucky.
Perhaps even twice as lucky.
Because finding one is like finding a dinosaur - they are so rare.
In addition, there are simple, purely physical ways to open any intercom without a key:
- Use force. Most locks on intercom doors are magnetic. And by pulling sharply, there is a chance to open the door. In principle, the efforts of one person should be enough. Although it is safer to do this with two or three people. And remember, the main thing is the sharpness of the jerk.
- Open the intercom lock with a stun gun. Place it on the reader and give a shock.
- You can try to open the door by hitting 10-15 cm below the installed device. This is where the electronics of the device should be located, and you will have a chance to close the intercom circuit.
Steel door with - excellent remedy preventing unauthorized access and various hooligan acts.
The problem is one thing. A tenant of an apartment in the entrance may lose, forget at work, or drop a small intercom key in the car.
For those who live alone, it is enough to press the call button so that the member of the household inside can open the door. It will be useful for others to know how to open the Cyfral intercom without a key.
Methods for opening the Cyfral intercom without a key
The digital intercom belongs to a series of devices with the largest number firmware versions, software and hardware implementation.
Its hack depends on:
- from a specific model;
- Access codes may differ depending on the firmware version;
- the code from the Cyfral CCD 20 intercom is entered in two groups;
- for some models, you can change the combination specified for access directly from the keyboard;
- The digital code may depend on the number of subscribers for which the model is designed;
- some versions have a universal code for the Cyfral intercom.
Most models are designed to allow access to most functions directly from the front panel. In particular, you can memorize a new key for the Digital intercom.
However, you can try the following door unlocking techniques:
- use Cyfral 2094 code if a particular device has a microchip firmware version compatible with the series of these locking devices;
- select combinations corresponding to the apartment or subscriber number;
- apply one of the complex combinations suitable for the Cyfral intercom model installed on the door;
- use the service entrance;
- program a new combination.
It’s worth noting right away: a universal key gives much more freedom; it can be ordered from many workshops and companies, including those that install or repair intercoms.
By apartment number
If the house is large and a locking device is installed on it, designed for three-digit addressing of the apartment, then the method for opening a digital intercom is as follows:
- A code from two groups is dialed. Dialing begins by pressing the call button or K, depending on the series, then the first three digits are entered, then the call button or K again, after which the rest of the combination;
- There are a number of standard combinations for apartments; they are grouped by the first digit. For example, apartments from 1 to 99 are not addressed, the rest are grouped in hundreds;
- codes for groups look like this: 100-7272, 100-7273, 100-2323.
In order for the door to open, it is not necessary to live in an apartment with a specific number.
These are only unlock codes programmed into the intercom software. Similarly, for example, 100-7272, combinations 200-7272 are dialed and so on, up to 900, according to the algorithm indicated above.
Via service mode Cyfral CCD 2094
Cyfral CCD 2094 has two simplified unlocking schemes magnetic device. The first step is to try the first activation level.
Methodology for opening the Cyfral CCD 2094 intercom simple method, looks like that:
- press the call button;
- press four zeros;
- If the display shows readiness as On, enter 2.
If the emergency opening circuit is successfully activated, the magnetic locking device is unlocked. But it may also be that the set of numbers was changed by the installer.
In this case, after entering zeros, the laconic Off will appear on the display. This means that access to the service is blocked.
In some series, the method for opening the Cyfral CCD 2094 intercom without a key uses access directly through the service menu. The models in question have only one emergency mode for unlocking the magnet.
To try to open it, you need to:
- press call;
- enter four zeros;
- after the inscription Cod appears on the display, use one of the combinations 456-999, 123-456, 1234-00;
- You need to complete the entry of each dial by pressing call. If you successfully enter the maintenance mode, the F0 prompt will appear on the display.
You need to try a new combination from the very beginning, that is, by pressing call, zeros, or receiving an invitation. If you log in successfully, at the F0 prompt, just dial the numbers 601.
The door will unlock. If this does not happen, the code for opening the Cyfral intercom on this particular entrance door can only be found out from the personnel who installed the device.
There is a third method. The process of how to open a Cyfral intercom without a key, the codes on which have not been changed, and the firmware is such that other methods do not work:
- dial four zeros;
- when the On prompt appears, indicating that you are waiting to enter the service, press two;
- when prompted by Cod, enter the six-digit numeric dials above.
If the outcome of events is unsuccessful and there are zero options on how to find out the Cyfral intercom code, you can try the last method of bypassing the protection.
Changing the device security code
Some versions of Cyfral devices have the ability to quite easily change the unique dial set to unlock the magnetic block. Its change depends on the model range and firmware version of the microcircuits.
In the 2094 series, you need to do the same steps as when trying to unlock the lock through the service menu.
Namely:
- dial four zeros:
- press two in response to the On prompt.
After the Cod prompt, you can try to set your own unique set of numbers to deactivate the lock. To do this, type the combination K button - zero - K button.
After it, the keys of a new set of numbers are pressed, in the amount of four pieces. If such a code is not in memory, it is considered unique, remembered as the main one, and the door is unlocked.
For the most popular series, the method for opening the Cyfral CCD 20 intercom by changing the main control code is as follows:
- press K;
- dial 98;
- press K again;
- dial the control combination 46-33.
This method only works on devices where the installer did not perform any programming or change the factory settings during installation. If this has been done, the option for how to open the Cyfral CCD 20 intercom without a key looks like this:
- dial the key combination K-zero-K;
- dial 1234;
- after the prompt in the form of Pr_ on the display, which means activating the service menu, press 5;
- after a pause, a new digital combination (4 characters) is entered, then it is repeated.
If everything is completed successfully, the device will emit a short single-tone signal, indicating that the new set of numbers is now the main unlock code. At the same time, the door opens. The new combination can now be used to access the entrance at any time.
For models with index M
Intercoms brand Cyfral, tsiferno - letter designation models that end in M are unlocked using one of the combinations described above.
A distinctive feature of these devices is that they have the widest range of firmware options, so hacking can take a long time, with trying all possible sets of numbers and methods for gaining access.
A series of models whose symbol-digit designation ends with the letter M also has its own, unique code for opening the Cyfral intercom. To access, you can try dialing the combination call - 41 - call - 1410, and then the series 07054.
Always worth remembering!
If none of the algorithms work, most likely the technicians changed the device’s factory settings during installation and it will not be possible to unlock the door without an electronic tablet.
Conclusion
It is worth remembering that when opening the entrance you need to act carefully, without going beyond the given algorithms.
If we are talking about devices of the Digital series, we can especially note that the maintenance menu allows you not only to change the main unlock code, but also to block a specific subscriber, reset information about all keys, and get other unpleasant consequences.
In order not to order many separate keys for the entrance of a house, mother’s apartment, favorite hairdresser, fitness center, it is most reasonable to order one universal electronic key that will open all doors.
The range of locking mechanisms, as well as firmware, are constantly changing, so opening options are constantly changing and becoming outdated.
Video: How to open the Cyfral intercom. Cyfral intercom code
Metacom digital intercom is used in apartment buildings residential buildings. It consists of a digital panel and a processor equipped with a power supply. Among users, the question often arises: how. There are two options: using an identifier or a special code. Thanks to its configuration, the device has a good degree of protection against unauthorized entry.
The controller built into the processor allows you to open the Metakom intercom using two types of keys: Touch Memory and Touch Cyfral. The device memory can hold up to 508 identifiers. The door can be opened using a special four-digit code. Users have the opportunity to change program settings according to their preferences.
Distinctive features of Metacom identifiers
To understand how to open the intercom, you need to know the configuration and operating principle of the key mechanism. The keys are developed by Metacom and are intended to work exclusively in this system. The master key is simple in design, different affordable price, the ability to carry out repairs, is equipped with a durable housing. The keys of this system are electronic and individual.
The Metakom intercom key has high consumer qualities and is very reliable in operation.
Magnetic master keys are resistant to vibration and shock, and are also not susceptible to external influences of the electromagnetic field. They can withstand temperature differences from -40º to +75º. The best for manufacturing are RW 1990.
Photo of the calling panel without a monitor
The use of a contact key is based on data exchange. Each is equipped with a chip and memory. It contains code information. Today there are about 260 million possible binary codes. The code cannot be changed during the entire service life.
The intercom key can also be contactless. Its production is carried out according to the generally accepted Em-marine standard. Contactless master keys are used in the Proximity system. They are made in the form of key rings or plastic cards.
Method 1: Codes on the screen
You can open the device using special combinations. The options for such encryption schemes vary depending on the equipment model. For keyless access, you can try the following algorithm:
- Press the call button;
- Number of the first apartment in the entrance;
- Call;
- Wait until “Cod” appears on the display panel;
- Enter digital key 5702.
If the above actions did not allow access, you can open the Metacom intercom of other models using the following codes:
- Code 65535;
- Call button;
- Digital key 1234;
- Call;
- Number 8.
Another keyless entry option is the following combination:
- Enter combination 1234;
- Call;
- Number 6;
- Call;
- Dial digital key combination 4568.
How to open the intercom if the above combinations were not successful? First of all, you need to understand the device model. For example, for the Metakom MK-20 M/T model, you can try using the following keyless access scheme:
- Call button;
- Combination 27;
- Call;
- Code 5702.
Another working diagram:
- Press Call;
- Dial number 1;
- Press Call;
- Dial code 4526;
- Bring the empty identifier to the reader and enter it into the device’s memory.
The video shows how to open the Metacom intercom without a key using the codes:
Method 2: Changing Software Settings
It is not always possible to unlock the Metacom intercom without a key. If the identifier is lost or damaged, you must program a new one into the device’s memory. To do this, you can use the following scheme:
- Code 65535, Call, 1234, Call, apartment number, Call, number 7. This combination will allow you to write the apartment number into the device’s memory;
- Code 65535, Call, 1234, Call, Call, apartment number, call, then the numbers 70111. This combination will delete all programmed master keys for a specific apartment;
- Code 65535, Call, 1234, Call, then numbers 97111. This set will allow you to delete all Master keys;
- Code information 65535, Call, 1234, Call, numbers 99. Entering information will ensure that a new identifier is recorded;
- Password 65535, Call, 1234, Call, numbers 990111. Using the password, the saved ID will be deleted.
The settings menu in Metacom intercoms is divided into three types:
- Service;
- Systemic;
- Custom.
To enter the system settings menu, just dial the combination: 65535, call, 1234, call, 9. To display the service settings menu on the calling panel, you need to dial the following information: 65535, call, 1234, call. To access the user menu, you need to dial the following code: 65535, call, 1234, press the call key twice.
You can open some models of such intercoms using a magnetic master key, the so-called tablet.
Contact picks can fit several mechanisms. You can use such an identifier after entering the code from the universal identifier into the device’s memory. In the future, this master key will be used as a suitable (initial) one.
Another solution to opening a Metacom intercom without an initial master key is to use a manufactured universal identifier. There is no need to select code configurations. The master key has a built-in chip with code information. In their manufacture, factory versions of firmware are used, so in most cases the programmed and provided information are the same.
The video shows how to open the Metakom MK 20 intercom door:
Opening the Cyfral intercom
It was no coincidence that I started with this brand: there is a model in my entrance Cyfral CCD-2094(according to some sources, this is one of the most common models in Russia, and also outdated). You can open such a door without a key using one of two methods:
1 - Click: 0000 , after which “COD” should appear. This is a code request to access the service menu. One of these should do: 123456 , 123400 , 456999 . We press the call button and wait for a reaction. If the inscription “F0” lights up - Hurray, you succeeded in entering! Now enter the code 601 and Digital is open!
2 - This option can only work if there are apartments at the entrance with numbers 100, 200, 300, 400, etc. For example, I’ll take number 200. What do we do? Press the button: “B” - then apartment number: 200. Then again “B” and code: 7272. That is, it turns out like this:
В-200-В-7272
If the door does not open, try these other options:
В-200-В-7273 В-200-В-2323
Video instruction:
For model CCD-2094M the code may work 07054
. There were also cases when it was possible to open the intercom by pressing the “B” + 41 and “B” + 1410 buttons.
In the case when you need to open “Digital CCD-2094.1M” (you can recognize it by the screen where the dot is blinking or lit) - you need to enter the following code: “Call” +0000. This will take you to the service menu and the “ON” sign will light up. Press button 2 to activate the “quick entry” mode.
If the word “OFF” lights up, it means the mode does not work and hacking Cyfral will not succeed because the master was “searched”.
Note:
If necessary, on the CCD-2094M model you can try programming your own key for the Digital intercom. You need to press the call button and hold it until the device goes into service mode. Then click on the five (5) and your apartment number. Let's look at the screen. The inscription “TOUCH” should appear - it indicates that you can apply the “tablet” of the key. After you do this, the key will be recognized and open the lock.
Audio intercoms Vizit (Visit)
As it turned out, “Visit” intercoms are the most resistant in terms of access codes or hacking. The most common models are BVD-313 and BVD-311. Modern ones - BVD-343 and BVD-344 are rare. By the way, I already have them additional protection from unauthorized control by particularly zealous residents.
During installation, in most cases, the standard settings are usually not left, and to select the code for the Visit intercom after this will take a lot of time. If you’re lucky and the installers cheated by leaving the default settings, then in order to open Vizit without a key, try the following codes:
Old models - *#4230, or 12#345 New models - *#423, or 67#890
An example of how the code works on the old model:
The following options are also sometimes rolled out:
#196 #999-1-1-5555-“Star”-#999-2-1-1-“Star”-#5555
You can try to hack the Visit intercom by entering the service menu using code #999, after which two beeps should follow. Now you need to enter the device's master code. We hope that the installer is lazy and enter 1234. Didn’t work? Then try: 12345, 0000, 9999, 11639, 3535, 6767. If you are lucky, one short beep will follow and you will be taken to the service menu. To open the Vizit intercom door without a key, you need to dial the numbers:
2-pause-#-pause-3535
An example of an autopsy on video:
By the way, if your Vizit intercom does not have “#” and “*” buttons, then do not be alarmed, instead of them there are, respectively, buttons “C” - this is an “asterisk”, and “B” or “K” is a “hash” .
Note:
To program your key, you need to press the “3” button in the service menu and attach it to the device. After this, the keychain will be added to the database. The main thing is not to press the number “4” - this will erase all the keys from memory. To exit the mode, press the “*” (asterisk) button, and then “#”.
How to open an intercom with a Metacom code
In order to open the Metakom intercom without a key fob, you can try entering the following options:
65535 - "B" - 1234 - "B" - 8 1234 - "B" - 6 - "B" - 4568
Also, there is information that the following codes may work:
"B" - 1 - "B" - 5702 "B" - 6 - "B" - 4568 "B" - 5 - "B" - 4253 "B" - 1234567 "B" - 1803
Video instruction:
It didn’t work, then we try to enter the service mode. To do this, you need to find out the number of the first apartment in the entrance. After that, press the “Call” button and hold it until “COD” appears. Now press the numbers - 5702 and... the door will open.
Note:
I have repeatedly come across information on the Metacom MK-20TM model on the Internet. According to the information provided, it does not have any protection against hacking the intercom. Therefore, if you poke a clean, unprogrammed key into it, it will go into engineering mode and automatically unlock the door.
How to open the Eltis intercom
Today, there are only a few models of Eltis contactless audio intercoms in Russia. Their device is simple, as is the firmware. That’s why hacking into Eltis is a common practice among young hooligans. To open the door, try entering the code:
Call - 1234-2-1-3-3-123
If the attempt fails, try these keys:
100 - Call - 7272 100 - Call - 7273 100 - Call - 2323
Also, as an option, you can try Digital codes.
Opening Barrier II, 2M and 4
These are very old intercom models. And that is why they are often still found in old nine-story buildings and five-story Stalin buildings. You won't find anything like this in new buildings 100%. In the “Barrier 2” and “Barrier 2M” models, to enter the entrance you need to press the buttons “1” and “3” or “1” and “0”. Sometimes you can open the door simply by moving a magnet in the area where the keys are placed. For the Barrier 4 model there are no universal keys or codes at all.
Other brands of intercoms:
Rainmann and Raikmann intercom codes
Despite some similarity in names, Rainmann and Raikmann intercoms are completely different devices. Raikmann devices are resistant to hacking and cannot be opened without a key using a code. But the Rainmann CD-2000 and AO-3000 models are found.
In order to open the 2000th model, you need to click on the “key”, then enter the code “987654”. After this, the intercom will beep and you need to enter the numbers “123456”. If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door, you need to press the number 8.
It’s better not to reap anything else - you can cut everything off and get the hell out of the residents.
Another life hack that users have noticed is the reaction of the touch keyboard to hypothermia. If you roll a snowball, apply it and hold it for 15-20 minutes, then there is a chance to open the door.
Factorial
Setting up intercoms of this brand is very, very similar to the already familiar Digital, with the only exception that when installing the device, it is necessary to change the master password and therefore it is believed that it will not be possible to open it. Although there may be a hacking option through the engineering menu. To do this, you need to dial the Factorial intercom code. In most cases the following are used:
000000 123456
Another option is to press the “5” button and hold it for 5-6 seconds, then type this:
180180 + "Call" + 4 + "Call" key.
Laskomex (Laskomex)
To open the door on Laskomex AO-3000 VTM, try entering the keys:
1 + "Key" + 8976
66 + "Key" + 1989
Didn't come? This means the code was changed during installation.
To enter the service menu, you need to click on the key 5 times, after which a password entry field will appear. The default is: 1234. Most often, it is changed upon installation, but there is still a chance. Code P8 is responsible for opening the door “Laskomex AO-3000VTM”.
DomoGuard
A rare guest in our high-rise buildings. It is extremely rare.
To open the Domogard intercom door, make one long press on “C”. After it makes a sound, quickly enter the code:
669900 + “Call” + number of the last apartment in the entrance plus 1
After this, the following message will appear on the screen: “F-”. We're inside the service menu! Then you can use one of the following options:
080 - Open door 333 - Remember new key 071 - Disable door lock
Blink
These are not entrance intercoms, but individual ones, used most often in private homes or where there is a concierge. There are no universal codes for it.
T-Guard
Another rare model. There is only one hacking option:
"Call" + 00000 + "Call" + "Call"
The last two calls must be pressed quickly and the entrance intercom will open.
Forward
There is very little useful information on Forward intercoms on the Internet. There are only three known universal keys that we managed to unearth:
123*2427101 K+1234 2427101
In order to program your door key for “Forward”, you can try entering “77395201”+”*”+0+”*”. After that, apply the key tablet and press “#” twice. If the code “77395201” did not work, try this one: “5755660″.
Condor
There is no information on master codes for the Condor intercom.
KS-intercom
There is very little information about how to open a KS intercom. The only code I could find:
"K" + "377" + pause + "698" + "K"
There is also information that sometimes the code works:
"K"+0000 "K"+9999
"K"+ 0000 + pause + 98 "K"+ 0903 + pause + 98 + pause + "K"
Unfortunately, they don't always work either.
Video: opening the intercom “KS”:
Techcom
There is information on the Internet that it will not be possible to open the Techcom door so easily. In some cases, the following may work. You will definitely need a key for such an intercom. Press and hold three buttons “1”, “6” and “0”. After that, we release them one by one. We start with “0”, then “6” and “1”. A signal will sound. Here we enter the default pass - “4321”. If the password is correct, click on “Call”, then on “3” and again “Call”. We bring the key and the door will open. I haven’t tested this method myself, but I can’t vouch for it.
Impulse-DS
There is very little information on Impul-DS intercom models. Possible options:
"1234"+"C" "B"+"99911"+"B"
The first option almost never works, because... The code will definitely be changed when installing the device.
Golden eagle
The entrance intercom Berkut LS 2001 is the only model of this manufacturer on the market so far. It is a simple device based on an oscillating circuit, which is assembled with a resistor and capacitor. Universal codes
"key" + 123456 + "key" + 5150С "key" + 123456 + "key" + 206С "key" + 123456 + "key" + 6140С "key" + 123456 + "key" + 2589С
You can also try making your own master code. To do this, type the command: “key” + 23456 + “key” + “ХХХХ” the “F” icon will appear. Now click on “9” and “key”. Next, you can enter your 4 digits.
Leader-M
These devices have not been produced for a long time. Unfortunately, there is no information at all on how to open Leader-M.
Keyman
At the time of writing, there is only one known master code for the Keyman intercom:
"K"+100+789+123456+8
In some cases, input without the last eight is rolled. Video guide:
Marshal
To open the Marshal intercom, you need to enter a number equal to the number of the last apartment in the entrance +1, and after that - “K” + “5555”. That is:
"Number+1" + "K" + "5555"
It works every other time.
Coral Intercom Service
The devices are extremely rare. There are only two known master keys for Coral Service:
123 + "beep" + "1234"
"00"+"beep"+"773952004"
Kamsan (KamSan)
There is no universal master code for KamSan intercoms, namely the KS-2002 model. There is no information on their programming. What is known is that it will automatically go into programming mode if you attach an empty blank key to it.
Commax
In the entrances you can find two models of this manufacturer - COMMAXCDV-50A and COMMAX CDV-50AM. Their device is very complex and practically no one has been able to crack its security. The only code I could find was this:
"K"+"S" + "K"+"S" + "K"+"S" + "K" + "K"
Kocom (Intercoms Kak or Kokom)
There is no information on models from this manufacturer.
Belsplat
At the time of writing, there are no keys to open the Belsplat intercom.
Pierres (Pierce)
In the entrances there are models “Pirrs 1000 Micro”, “Modern” and “Lux”. Factory master code for everyone three types:
"12345678" "K"+"1234"
Also for the Pier 1000 Micro model the key may work:
"8310649" + "entrance number"
There is evidence that these models of audio intercoms allow you to enter your own code. This is done like this:
Enter the master code “12345678”. If it has not been changed, a beep will sound. Press the door open button, and without releasing it, press the number “5” on the keypad. The confirmation signal for entering the settings should sound again. Release the door open button. Now you need to enter your code - 987, for example. The main thing is that there should be no more than 8 digits. Moreover, the sequence of the first two digits should not coincide with the master code or the apartment number in the entrance. After finishing entering the code, click first on the “star” and twice on the “hash”. After this, the intercom can be opened with the code: "987"+"*".
Secret
In real life you can find only one intercom model - “Secret-999”. There are no codes for it. It is not hackable.
Arcades
In fact, the Arcades intercom is a slightly modified KS model, which I already reviewed above. Accordingly, codes from KC should also be suitable for it.
SmartEL
There is no information on codes for the SmartEL brand intercom.
Cron
The default key is “951”, but there is almost no chance that it has not been changed. Hacking Kron audio intercoms is impossible, since nothing can be done without an individual master key.
Stroymaster
There are no universal codes for these devices. The only thing you can do is try to enter the system menu and put your code. But to do this, you first need to learn the procedure for programming a new key, which is very labor-intensive. Well, then you will need to press and hold the “B” button until the inscription “SYS” appears. After this you need to enter a password. The default is: "1234". If it doesn't fit, then you're out of luck. Did you come up? Great! Program the key according to the instructions and use it!
Attention! If you tried to use the code specified in the article for your intercom and it did not work, there is no need to write angry comments. I make no guarantees. What works in one entrance is not a guarantee that it will work in another. In addition, in Lately installers became smarter and, having had enough of problems from young hackers, began to change passwords and master codes.
If you are looking for information on ways to open intercoms without a special key, our article is for you.
Nowadays it is rare to find an entrance to the entrance of a residential building that is not equipped with protective device. Situations when you need to open a door without a special key occur quite often.
The intention of seeking information on this issue is not necessarily fraudulent or criminal in nature. Perhaps you do not have access to your own entrance due to a lost or broken key, or you want to visit a loved one who is sick or does not answer calls for a long time. In such cases, opening the door without a key fob is permitted by law. For other purposes, using access without the permission of residents is interpreted as breaking into and damaging private property, which may be criminally punishable.
Opening an intercom using a code
How to open any intercom without a key?
- To easily enter an entrance equipped with an electronic access restriction system, it is enough to know the specifics of the device itself. The design of almost every modification includes a microphone and speaker built into the external panel. To create an effect feedback, cover the intercom panel with your palm for maximum isolation from extraneous noise. A high-pitched sound will appear (you can hear something like this if you bring the working microphone closer to the speaker), when the sound increases, you need to pull the door handle. If everything is done right, door lock will be unlocked.
- You can use a special key. This tool allows you to open an intercom of virtually any modification, but does not provide a 100% guarantee. Meet universal keys, suitable for certain brands devices – with such tools the probability of successful “hacking” will be much higher (up to 99%).
- It is possible to open the intercom by using force. To do this, place your foot well at the bottom of the door under the handle and pull sharply. It is not necessary to use enormous force - it is important to place the right emphasis. Pulling the handle smoothly will also not work – a sufficient jerk is required.
- One way to open is to use a piezo element, for example from a regular lighter. The electric shock must be applied exactly to the place where the key is inserted. Of course, this method does not always work.
- Intercom models equipped with a touch keypad can be affected by hypothermia. The effectiveness of this method can only be tested in winter. To do this, take a handful of snow and press it to the button area. When the message “Err” appears on the display (in 10-15 minutes), the lock will be unlocked.
- An option is also to short-circuit the light bulb at the entrance to the entrance. A short circuit will cause a power outage at the entrance, which means the intercom will be turned off. This method is one of the most dangerous in terms of possible unpleasant consequences.
- Each intercom has its own program mode. You can use this function after entering special cipher characters from the keyboard. Using this code you can open the door and also change some system settings. Programming of system codes is carried out at the manufacturing stage of the device. For the same model, they are the same by default, but can be replaced during installation and installation. In general, installers do not program unique codes, so most devices are opened by entering factory codes.
Opening the intercom if the key does not work
How to open a Vizit intercom without a key: codes
Visit models are recognized as one of the most secure, and the most difficult in terms of opening. Some keyboards do not have the * and # buttons; instead, the characters "C" and "K" are entered.
- If no changes have been made to the default system settings, access can be obtained by entering a code *#4230 or 12#345 .
- The latest models of Visit audio intercoms are opened using ciphers *#423 or 67#890 .
- To unlock the lock using the device's service functions, dial # 999 , wait for 2 short beeps, then enter the system password 1234 . If the password was entered correctly, a single high-pitched sound will be heard; if it was incorrect, a two-tone signal will be heard. Then try using one of the possible digital combinations: 0000, 6767, 3535, 9999, 12345, 11639.
- If you were able to use any of the above options to enter the device’s program mode, enter the following characters: 2 # 3535 – enabling the door lock override function
- Clicking the " Z» allows you to program custom keys. Press your magnetic key against the reader while holding down the key # until you hear a short beep - your key is saved in the hardware memory.
- * — exit the current parameter settings, # — confirmation of the modifications made.
Intercom VIZT
Video: How to open the Vizit intercom. Vizit intercom code.
How to open the Cyfral CCD intercom without a key?
Cyfral devices are the most common in our country. Such models were installed a long time ago, but most modifications have standard access codes.
- Method 1
If there are apartments in the entrance with numbers divisible by 100, do:
"B" code1 "B" code2
code1 – apartment number
cipher2 – 2323, 7272, 7273
In other words, you must enter "B" 300 "B" 2323. - Method 2
Use one of the options:
"B" 41
"B" 1410
Some modifications of Digital open after entering numbers 07054 .
Model CCD-2094.1M opens as follows:
- "B" 0000
The door will unlock or the device will be put into system setup mode (the message “ ON"). After that enter the number 2 . - If you see the message “ OFF“, this means that the set of standard codes was reprogrammed during the installation process and the idea of breaking the door will have to be abandoned.
To hack the CCD-2094M model, use the code 0000 and press " B«.
- The display should display the symbols “ C.O.D.". Then enter one of the combinations:
123456 "B"
456999 "B"
123400 "B" - Wait 3 seconds until the message “ F0"—then access to the software setup menu will be open. Enter the code to login 601 .
If necessary, on this model you can try to set your own key for the Digital device, if you have one:
- Hold down the " B» pressed until the device enters the service setup mode.
- Then click 5 and enter the number of the desired apartment. If the message “ TOUCH", bring the key to identify and store in memory.
Intercom CYFRAL
How to open Metacom intercom without a key: codes
Opening most Metacom models is done as follows:
- Press call, indicate the starting number of the apartment from all located in your entrance, and call again. You will see the message “ C.O.D.", after which you will need to specify the characters 5702 .
- If this technique does not bring the expected effect, use the sequence of characters: 65535 call 1234 call 8
The Metakom MK-20 M/T model is distinguished by the fact that this device There is no software system for restricting the determination of the master key. Thus, if you press an unstitched key against the reader, the programming mode will automatically be activated, which will allow you to unlock the door.
If it is not possible to use the key:
call 27 call 5702
call 3 call 4526
Metakom intercom
How to open the Eltis intercom without a key?
Eltis models are considered the simplest to open, since they have a small number of system code options and low level access protection:
call 100 call 2323
call 100 call 7373
Intercom ELTIS
Video: How to open the intercom Cyfral, Eltis, Vizit.
How to open the Marshal intercom without a key?
For models from this manufacturer, enter from the keyboard maximum apartment number in the entrance, increased by 1(for example, if the highest number is 15, then enter 16) and then " TO» 5555 . This method works on most Marshall devices.
Intercom Marshal
How to open the Factorial intercom without a key: codes
- The procedure for opening Factorial is similar to using the system functions of Cyfral models. Entering the software settings is done by dialing one of the 6-digit codes (use the symbols 000000 or 123456 ).
- Representatives of the company claim that hacking a device of this brand is almost impossible, since replacing the system code during the installation process is an integral condition of the service.
- Try the following combination:
Hold down the number button 5 until the system message appears on the monitor, then dial 180180 call 4 call.
Intercom Factorial
How to open Rainmann and Raikmann: codes
Although the names of these models are very similar, Rainmann and Raikmann are actually different devices.
- Raikmann modifications are software protected from hacking, so they cannot be opened by entering a code without a key.
- Rainmann CD-2000 can be hacked by pressing the " key", then a sequence of numbers 987654 . After a short beep, enter 123456 . If the mode for changing settings is available, the symbol “ P", then press the number 8 . If the door does not open, it is not recommended to press anything else, as the device may be blocked.
How to open a Techcom intercom without a key?
It is believed that doors equipped with Techcom models cannot be opened without a key. To try to do this, you need to have some kind of magnetic key for a device of this brand. Try the following sequence of actions:
- Hold down the buttons 1, 6, 0 together (in some models 2, 5, 8).
- Then release in reverse order one at a time, first 0, then 6 and 1 (8, 5, 2).
- After the beep, enter the factory key 4321 .
- Click call 3 call.
- Bring the key to the reading element and the lock will be unlocked.
Intercom TechCom
How to open the Safe Service intercom without a key?
Safe Service intercoms may have different codes depending on the modification of the device. The standard codes specified during the manufacturing process are 000000 or 123456 .
If the factory code is not suitable, use the following recommendations:
- Press the number Z and hold in this position until the entry to the software menu appears on the screen.
- Enter a code 180180 , call, number 4 – the device remembers the combination and opens access to the door.
Some Safe Service models can be opened using a regular 6-12V battery. To do this, you need to remove the bottom panel of the device, under which the mounting bolts are located. Between them you can see a small connector; it is in this place that the battery is placed, which allows you to unlock the door.
Intercom Safe Service
How to open the Laskomex intercom without a key?
These devices are a digital lock. Access to it is provided by entering the service mode:
- Press the image key four times in succession key And 0 .
- Enter system password 6666.
- A message should appear on the display SSSS, then R-(this indicates that the setup mode has opened).
- Press the number 8 (code to cancel door blocking).
Intercom LASKOMEX
How to open the Forward intercom without a key?
There is quite a bit of useful information on the Internet about the possibilities of accessing Forward models. You can try using standard keys:
123*2427101
"K" pause 1234
2427101
If you have a key fob for a device of this brand, try reprogramming the device:
- Enter 77395201*0*
- Press the key against the reader and press the symbol # twice
How to open the Kron intercom without a key?
It is almost impossible to hack devices from this manufacturer. Service key 951 , but the guarantee condition for installation is the mandatory change of the system code.
How can I open an intercom without a Stroy Master key?
Devices from this manufacturer do not provide the ability to enter system codes. The only option to open such a model is to enter the software menu and set a custom cipher.
- Hold down the " B"until the inscription " SYS«.
- enter password 1234 .
- Enter your own code.
Intercom Stroy Master
As a conclusion, it should be noted that not all of the listed opening methods may work with certain device models. The reason for this may be a change in system settings, differences in device modifications, and hardware installation features. It should also be taken into account that the latest models of intercoms are equipped with improved protection against unwanted access and control.
Video: 5 cool lifehacks with intercoms / how to open an intercom
If you still were unable to enter without a lost or broken key, contact your service center to obtain a new one.
