Christmas tree made of plastic bottles. Master Class. Creative Christmas trees made from plastic bottles

Make or buy? Pessimists or simply lazy people, of course, will object: why make something out of trash.

But it is worth noting that plastic bottles are excellent ready material for crafts. And, in addition, a person’s hands and head work, imagination searches for solutions, logical thinking develops, and you can still make money from this.

Let's not invent anything new, but show interesting ideas and the works of wonderful needlewomen, whose inventions are inexhaustible.

Collecting materials which will be useful for making a Christmas tree from plastic bottles with your own hands:

• plastic bottles with a volume of 1.5-2 liters, ideally green, blue or silver
• scissors
• sharp knife
• thick A4 paper
• narrow tape
• double sided tape
• glue moment or universal
• candle
• ornaments for decoration

First version of the Christmas tree

We do it as in Fig. 1-3. For this:

• Step 1. We collect 2-4 bottles of the same color, or different sizes. How more bottles, the higher the tree will turn out.
• Step 2. Cut the bottle into 3 parts with a sharp knife, separating the neck and bottom.
• Step 3. We use the bottom as a stand; for strength, cover the inside with plasticine, for example, or stick decorative pebbles on top.
• Step 4. We make the trunk from thick paper, which we roll into a tube and insert into the neck. It is better to fix the free edge of the tube with glue or double-sided tape. For the trunk, you can also pick up a ready-made tube, which you may have lying around on the farm.
• Step 5. We cut the middle part lengthwise, then into rectangles of equal width, from which we will make branches. One bottle will yield 3 rectangles; for a Christmas tree, 9-12 pieces are enough. Every 3 pcs. make the length shorter by a couple of centimeters.
• Step 6. In each workpiece we make fringe needles with scissors, without cutting the strips to the end of 1-1.5 cm. The narrower the stripes, the fluffier the tree will be.
• Step 7 To make the fringe curly, using a dull knife blade, holding it with your thumb, stretch the strips a few pieces at a time, i.e. not all at once. It's not easy, but it will be effective.
• Step 8 All that remains is to attach our branches to the trunk. We begin to wind the longest fringe around the trunk from below, then overlap the next one, securing each branch with tape. And so on to the very top. If the trunk turns out to be longer, just trim it carefully
• Step 9 For the top of the head, you can use one of the blanks, rolled into a tube or other prepared decoration
• Step 10 We decorate the finished Christmas tree as your imagination dictates, but it’s better to let the children do it.

Helpful advice: you can start decorating the Christmas tree at the manufacturing stage. Decorate or cover your workpieces with decorative sparkles and sequins, paint the edge of the fringe, for example, white.

Fig 1 - Option 1 (what should happen)
Fig 2 - Option 1. Manufacturing stages 1-7

Fig 3 - Option 1. Manufacturing stages 8-12
Fig 4 - Herringbone. Option No. 2

That's it, the green Christmas tree from plastic bottle ready!

The second version of a Christmas tree made from plastic bottles

For this Christmas tree you will need several plastic bottles, either colored or can be pre-painted. Figure 4 shows all stages of the work.

Step-by-step description of the process:

• Step 1. Using a sharp knife, cut off the bottom of all bottles. We leave one bottom for the base-stand, do not throw away the rest, they will be useful for other ideas.
• Step 2. We cut the upper part into approximately equal strips 2-3 cm wide, without cutting to the end of the neck. The result was twigs. It is clear that the more bottles, the taller your beauty will turn out.
• Step 3. Next, on each branch we make parallel cuts on both sides, i.e. imitation of needles, which we bend in a chaotic manner. Looks like it turned out like fir branches? Then let's continue.
• Step 4. For the prepared stick-barrel or maybe you have a suitable metal one, plastic pipe, we string the bottles sequentially. All neck down and start with the largest one if you have them of different sizes. No glue or tape, tightly to each other.
• Step 5. We make the stand, as in the previous model of the Christmas tree, with some nuances:
  - we take into account that the structure will be heavier - once;
  - on the ends of the barrel, we fasten the plugs so that it does not jump out of the hole, and on the other side, in order to secure all the bottles put on - two.

You may have to use male help and ingenuity.
Here is another version of the Christmas tree, all that remains is to decorate it.

Two original green beauties

The third design option in Fig. 5. The principle of making a Christmas tree from plastic bottles with your own hands, as you understood from the previous options, is similar.

Let's take a quick look features of this option:

1. In this case, the middle of the bottle is cut into squares.
2. Using a prepared stencil, cut out circles from squares.
3. In the middle, use a hot nail to burn holes in each piece.
4. We make strip cuts in a circle, not reaching the middle by about 1 cm.
5. Then the resulting needles can be slightly curled, as in the first option, or melted at some distance above the candle.
6. For the stand, we use the bottom of the bottle, where we also make a hole and insert either a skewer, or sushi chopsticks are perfect.
7. We put the twigs on the resulting trunk, but there is one caveat: you need to come up with some kind of detail to put on between them - it could be a cork, it’s great if you can find large beads with a suitable hole. We decorate either each detail before assembling it, or the finished Christmas tree.

Fourth option Fig. 6.

Fig 5 - Green beauty. Option #3
Fig 6 - Green beauty. Option number 4.

In addition to the above, prepare a wine bottle cork, a strip of foam rubber, and a hard plastic cup.

The action plan is:

1. The first step is all the same as in the previous options - we cut rectangles, then we make various stars out of them - these will be the “paws” of the spruce.
2. Let's hold the resulting pieces over the fire just a little bit so that they bend slightly.
3. We will make multiple cuts at the tips of the “legs” - this will make it more beautiful.
4. Now we will glue a piece of foam rubber to the parts, the result will be a pyramid.
5. The trunk of such a Christmas tree will be a cork plug.
6. Drop a little glue into the glass and attach the cork to the bottom.

The Christmas tree made from plastic bottles is ready, you can give it for the New Year!

Today we bring to your attention the process of making a large holiday tree from simple green plastic bottles. This Christmas tree is collapsible, so it can have any number of tiers (you only need a longer “stem”). You can add more layers each year and within a few years you will get a big fluffy beauty around which your children will dance in circles.

To make a Christmas tree from plastic bottles you need:

Green plastic bottles (it took 1.3 liter bottles about 30 pieces);

Steel part (“rod”) of the desired length (here about 0.5 m, with an approximate diameter of 0.5 cm);

Single-core aluminum wire insulated (cross-section 2.5mm2);

Christmas tree stands;

Scissors, heat gun;

Christmas tree made from plastic bottles step by step:

Take the bottle and cut off the middle part from it, as in photo 2-3. Then cut this part of the bottle in a spiral using scissors, cut a strip with an approximate width of about 2 centimeters (photo 4).

Next, you need to bend one edge approximately 0.5 cm along the entire length of the strip, as in photo 5-6. This side will help set the direction for spruce needles (needles), and will also serve as a limiter for cutting the “needles”. Cut a fringe strip about 0.1 cm wide (photo 7-8).

Then start creating spruce branches. Let's make a “top” for the Christmas tree, for which wrap a strip of plastic (about 8 cm long) around the “rod” and glue it using a hot-melt gun (apply glue to the “rod”, otherwise the workpiece will high temperature may become deformed) (photo 9). Next, twist a small piece of fringe and glue the pieces inside (photo 10). Then wrap the “rod” in a spiral with a strip of fringe (photo 11). When one strip ends, take another and continue gluing (photo 12-13).

After making the top, make the first tier of branches, which will consist of three short parts (a branch with an approximate length of about 7-8 cm). Make a wire frame, as shown in photo 14, connect it to a plastic ring (photo 15-16).

Start wrapping the “branches” in the same way as the top (photo 17). After creating all the branches, braid the “needles” and the main stem (photo 18-19). As a result, you should get two parts, as in photo 20.

Make the third detail of the future Christmas tree, a remote one. At first it was made too high, so it was moved to the bottom of the tree and the piece was made smaller. In total, four distances were used for this tree: Upper - approximately 0.5 cm; the second - about 0.6 cm; third - 7 cm; the lower one is 8 cm. Make “distances” by analogy with making the crown, just do not close the upper hole (photo 21). The Christmas tree will look like at this stage, as in photo 22.

Next, make a second tier of branches, which will be wider than the first and will already include four branches (with an approximate length of about 9 cm), each of which will have two side branches. The length of the main branches turned out to be approximately 9 cm (photo 23 -24).

Wrap the frame, starting with the smallest branches, then the main ones, and ending with the trunk (photo 25-26). Under the influence of hot glue, the plastic heats up and takes on a fairly plastic shape, making it very easy to set the direction of the needles for each branch at the junction of the branches (photos 27-29).

The central part of the stem before camouflage with pine needles looks like in photo 30, and after camouflage it looks like in photo 31. Next you need to make a second spacer part (photo 32).

Next comes the production of the third tier, with an approximate length of branches of about 10 cm (20 cm in diameter) (photo 33). Finally, make the lower tier (branches 15 cm long (30 cm in diameter)) and the lower distance (photo 34).

All that remains is to install everything on the stand! If desired, you can make any number of tiers, and each subsequent tier should be proportionally wider than the previous one - this way you can get a tall and elegant Christmas tree.

The Christmas tree made from plastic bottles is ready!

According to the site: girlsschool.ru

New Year is a wonderful holiday! For his sake, even ordinary plastic bottles are ready to turn into a wonderful fluffy Christmas tree that will become a constant companion of all New Year holidays, and if desired, even... It can grow up!

Yes, that’s right, our plastic artificial Christmas tree may well grow into a tier or even several if we make these tiers for it :) It’s composite, collapsible, so to “make the tree grow” you only need a longer rod, a little more materials and patience. And what? It’s not a bad tradition to make a new tier for our beauty before each New Year. At first it will be half a meter high, in a couple of years the kids will be able to dance round dances around it, and in a few more years they will have to look for housing with higher ceilings :)

This is what our assembled craft looks like:

And here it is - disassembled:

For the craft we used:

• Steel rod of the required length (our height is approximately 500mm, diameter approximately 5mm);
• Aluminum single-core wire in insulation (cross-section 2.5 mm 2);
• Green PET bottles (we used at least 30 1.3 liter bottles);
• Spruce stand;
• Thermo gun;
• Scissors.

We will use only the middle, cylindrical part of the bottles.

Cutting the cylinder in a spiral with scissors, cut out a strip approximately 20mm wide.

Then, along the entire length of the strip, bend one edge by about 5 mm, as shown in the photo below.

This collar, firstly, will set the direction for the Christmas tree needles (needles), and secondly, it will serve as a limiter when we cut these needles.

We cut this fringe, about 1 mm wide

We will need a lot of it, it’s not for nothing that we have prepared half a bag of bottles :)

Making the “top” for the spruce:

To do this, we wrap a strip of plastic about 80mm high around the rod and glue it using a heat gun into a cylinder with a diameter similar to the rod (you need to glue it directly on the rod - otherwise the workpiece will be deformed from the high temperature)

Now we twist a small piece of fringe into a cylinder and glue it inside the cylinder (see photo).

Then we take a strip of fringe and wrap it around the tube in a spiral, carefully gluing it with hot glue along the entire length of the top.

When one strip ends, take the second one and continue working (without removing the workpiece from the rod).

The top is ready, we make the first tier of branches - we have them the shortest, out of 3 pieces. The length of the branches is 60 - 70mm. We bend the frame from the wire, as shown in the photo, and connect it into one with a plastic ring.

We wrap the branches with pine needles, just like the top.

After all the branches are ready, we equip the main trunk with needles.

We already have these 2 parts!

We make the third part, the remote one. We made it too tall at first, so we moved it to the bottom of the tree and made it smaller on top. In total, 4 distances were used for our Christmas tree: Upper - approximately 50mm; the second - about 60mm; the third, respectively 70mm; lower - 80mm. We make the distances using the same technology as the top, only we don’t close the hole at the top.

This is what the Christmas tree looks like at this stage:

Then we make the second tier of branches. It is wider than the first one, already consists of four branches, each of which has 2 side branches. The length of the main branches turned out to be approximately 90mm.

We wrap the frame, starting with the smallest branches, ending with the main ones, and then the trunk.

The plastic heats up under the influence of glue and becomes very plastic, thanks to which at the junction of the branches you can easily set the direction of the needles for each branch.

This is what the central part of the trunk looks like before we disguise it with pine needles:

And here it is - after:

Then - the turn of the third tier. Branch length - approximately 100mm (200mm in diameter)

Then we make the lower tier and the lower distance. The length of the lower branches is approximately 150mm (300mm in diameter)

All that remains is to make the stand. Your husband can make it, but if he can’t, go to any nearest carpentry shop, they will make it for you in 20 minutes. But you can go the other way, get creative and create another stand at your own discretion.

Four tiers, as you understand, are far from the limit! You can make as many of them as you like, as long as you have enough patience and bottles. Each new tier will be proportionally wider than the previous one, there will be more branches and they will be fluffier, and the tree will be taller and more elegant!

HAPPY NEW YEAR!

1. Christmas tree made from plastic bottles

Prepare a Christmas tree like this green plastic bottle, scotch, scissors(such that they can easily cut a plastic bottle, Whatman tube. The only thing you can add to such a Christmas tree is to decorate it with beads, gluing them to the Christmas tree with glue. You can hang a rain ribbon. You can make this craft with your children. Next, we do everything as in the photo:

To make decorative New Year's craft: Christmas tree made from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

So, cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.

The next step is to roll the Whatman paper into a tube. We insert it into the neck of the bottle and secure it with tape in a circle.

The top of our New Year's tree You can decorate with a homemade Christmas tree decoration or complete the Christmas tree the way we did.

If you want to make a fluffier Christmas tree from PET bottles, like the one in the photo below, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

2. For Christmas trees made from plastic bottles you will need green bottles of various sizes and wooden stick, with a diameter slightly smaller than the neck. The length of the stick will determine the height of the tree and the number of bottles.

I guess it's ready)

4. Another very interesting option

For production we will need:

• scissors
• green bottle
• cork plug
• round glass of cottage cheese dessert
• candle
• glue.

Also find foam rubber. We cut a piece of a kitchen sponge for washing dishes.

First, cut the green bottle into squares or circles different sizes. For the bottom of the Christmas tree, the width of the square should be at least 6-7 cm, for the middle - about 5 cm, for the top of the head 2-3 cm is enough.

Now, using scissors, we densely break through the edges of the stars. You can call your household for help. In fact, the work is painstaking and requires a lot of patience. Edging the edges takes approximately 30 minutes. To make the spruce paws look more natural, we bring the plastic to the flame of a candle. The tips of our coniferous branches will gracefully curl down. Here is the finished result.

It's time to apply glue and foam rubber. Cut the sponge into small pieces (1x1 cm).

Now we coat the largest one with glue. spruce paw, put a cube of foam rubber on top. Add glue again and cover it with green plastic.

We continue working until we run out of parts. Don’t forget that we are “building a pyramid”, and therefore with each subsequent gluing we focus on the size of the plastic star.

All that remains is to design the trunk of the coniferous tree. Of course, its role will be played by a cork plug. However, to make the craft resistant to tipping over, we will place a small yellow bucket in the tree. Let's cut it out of a round cup.

Lubricate the bottom of the bucket with glue and place a cork barrel in the center. Set aside the part for 2-3 minutes, let it dry completely.

We connect the crown with the trunk. The result was a slender emerald Christmas tree made from plastic bottles. A real forest beauty.

Bottom line

5. By the way, the Christmas tree also looks quite creative with larger “branches”
We cut the bottle into 3 parts. Only make cuts in a circle towards the center, straight.

A puncture is made in the center with an awl and the needles are bent up and down in order. A puncture is made in the lid of the cream or mineral water into which a skewer of the required length is inserted.

The parts are strung in descending order, with a large bead placed on top of the glue. The Christmas tree can be decorated with polystyrene foam, rain, etc.

Glue the Christmas tree onto the disk stand.
The Christmas tree is ready