I didn’t find a detailed MK :(
Night lights made from New Year's garlands
You need wire, you need to lay the garland on the table on branches (well, count how many light bulbs you need for 1 branch)
then make twigs from wire, weave a garland into them, hiding the wire in the wire. wrap the wire in wire... well, you can wrap a couple of wires in length along with the wire (so that the branch does not stretch)
such a circle of wire with branches hanging on it should remain and a cord with a plug - all this (except for the cord with a plug) will need to be hidden in the trunk.
then collect the branches into a trunk, hiding the remaining excess wires in the trunk.
then decorate the wire with corrugated paper (or foil, or whatever you like) (well, like bark to make it look like)
and you can put the tree on the table and plug it into an outlet.
just don’t forget to make the roots wider (otherwise they won’t stand) or plant a tree in a pot..
I think it can also be made on a frame... for a Christmas tree, it’s normal that the legs go down, but if you make pine or cedar... you can immediately make a tree frame from stiff wire and screw light bulbs to it.
The branches can be made in different ways (location of light bulbs).
The stand is an upside down tin can with a hole. a barrel is inserted there and everything inside is tightly packed with newspaper. there is a circle of cardboard glued to the bottom
By the way, I looked at the Christmas tree and thought that I could cover the branches with dark green tinsel... it won’t be very shiny, but fluffy. You can continue to use it outside of the holidays)
Also, a friend says she decorated the branches and trunks with masking tape and then painted them with gouache and varnish. I’ll also take a picture of her tree as soon as I get a new camera. she screwed it to the stones (instead of a stand)
Unfortunately, I don’t have a camera, so I can’t show you :(
I can only show you how to make a Christmas tree night light (beginning), the rest of the photos are lost: (don’t judge too harshly, it was done at the dacha in 2 hours so that my hands would remember))
Currently, there is a huge range of decorative lighting products that are successfully used to decorate rooms and streets. LED trees are becoming especially popular various types, which serve not only as decoration, but also perfectly complement the lighting of buildings and surrounding areas. Thanks to their qualities, they fit perfectly into almost any interior. During the daytime, artificial trees look quite natural, and with the onset of darkness they begin to delight others with all their colors and shades.
Available for sale a large number of finished products, however, if you wish, you can make an LED tree with your own hands. Important positive factor is low energy consumption, so such trees are increasingly used for decoration in offices, shops and restaurants, attracting the attention of potential customers.
LED tree for home or apartment
Most often, when making LED trees on your own, intended for installation indoors, two main methods are used.
Tree with LED garland
The manufacturing process begins with a frame, for which aluminum wire is best suited. It easily bends at any angle, giving the future structure any configuration. A more realistic color is achieved by wrapping the white insulation of the wire with black electrical tape.
Then, the finished frame is evenly wrapped with a garland, secured to the wire with black electrical tape. If desired, you can create additional decorations for LEDs in the form of decorative nozzles made of transparent plastic. Upon completion of the work, the manufactured tree just needs to be connected to electrical network and trust its performance. Thus, the question of how to make an LED tree with your own hands can be considered resolved.
The main advantage of this method is considered to be ease of manufacture. The main disadvantage is the impossibility of making wood large sizes. This is due to the standard length of the garland, which is not enough to fit on the entire tree. Therefore, this method is most suitable for the manufacture of miniature products, which are also very popular.
LED tree
Making a tree from individual LEDs is considered a more labor-intensive process. However, this method does not have the disadvantages inherent in ready-made garlands, which makes it possible to produce structures of any shape and size. The main material is 5 mm LEDs. To equalize the voltage you will need resistors.
Direct manufacturing begins with soldering. The LED contacts have different lengths, so the resistor legs are pre-shortened on one side. You need to solder the contacts of both elements very quickly so as not to damage the LED.
Heat shrink tubing is then cut into the wires to cover the solder joints and resistors. It is necessary to leave space for soldering the power wire. The tube is inserted onto the resistor leg and heated a little with a lighter to give the insulation the required shape. This operation is performed with each LED.
After this, you can begin making the tree itself. Most often, the trunk is made of thin plumbing pipes, and the branches are made of wire, approximately 50 cm long. The main part of the branch takes 45 cm, and 5 cm is left for attaching it to the trunk. Small branches are cut into sizes up to 10 cm. The number of LEDs on one branch must be calculated in advance.
At the next stage, small branches are tied with electrical tape to large branches. It is recommended to make the number of LEDs on each small branch equal to the number of LEDs on the large branch. Each LED is secured using electrical tape.
The wires need to be stretched along the entire length of the main branches, after which they are cut taking into account the bends of the small branches. The ends are wound to the trunk, after which all the pros and cons on each branch are connected. Their number should match the total number of branches. The wire connections are insulated. All that remains is to hang it evenly decorative ornaments and connect the finished tree to the electrical network.
LED trees for outdoors
Artificial trees with LEDs can be installed in any place to decorate the landscape and surrounding areas. Attractive power beauty actively attracts visitors to restaurants and cafes, shopping centers and boutiques, offices and others public places. Each luminous tree, with its configuration, largely resembles real plants, and sometimes completely imitates them. Artificial bark is used to cover metal branches. Maximum similarity can be achieved thanks to silicone or plastic leaves and flowers made in natural size.
The entire structure of the artificial tree is decorated with multi-colored LEDs. Most often they operate from an electrical network, but in some cases they can be used autonomous power supply, which leads to a slight increase in the cost of the design. Sometimes used LED garlands, however, they do not produce the same effect as LEDs used individually.
Advantages artificial trees with LEDs:
- Long service life of at least 5 years.
- Artificial structures do not require the maintenance required by real trees.
- Low power consumption. Even the most big trees consume electricity in an amount not exceeding 700 W.
- The simplicity of the design allows you to install it yourself, without involving specialists.
- Design resistance to low temperatures, dust, high humidity and other negative impacts.
- If one or more LEDs burn out, the rest of the chain will continue to work, and faulty elements can be easily replaced with others.
- Right choice artificial trees and bushes allow you to favorably emphasize and complement the elements.
Sakura is especially popular among LED plants. These trees are especially beautiful due to the highly durable coating of the branches with plastic or aluminum alloy. Their appearance is as close to the real thing as possible. Despite the relatively small sizes, this tree provides as much light as taller structures. Sakura has a soft and delicate light spectrum, mainly white, pink and golden tones.
Making your own wood for the street
When making wood with LEDs for outdoor use, you must take into account the aggressive influence of the environment. Therefore, before you start making an LED tree for the street with your own hands, you need to determine the entire procedure in advance.
The general scheme of work will be approximately the same as for conventional structures intended for indoors. IN street version It is recommended to pay attention to more thorough covering of the trunk and branches with high-quality materials.
It is also necessary to take care of good insulation of the LEDs after soldering them with resistors. The heat shrink tubing should completely cover each pair. If necessary, all unreliable areas can be additionally insulated with black electrical tape. The same goes for wire connections in the plus and minus areas. Decorative items should be secured more efficiently so that they are not torn off by strong gusts of wind.
Master class: DIY glowing tree
The desire to decorate their home or apartment is familiar to all happy owners of real estate, as well as to those who have to live in rented premises. Modern manufacturers of various decorative devices are racing to meet the growing demand, offering new product after new product and creating the most unimaginable combinations of styles and technologies.
Some of them perform a purely aesthetic function, others combine attractiveness appearance with functionality. These useful decorations include luminous trees made of polymer materials and equipped with a large number of small ones. This decor can perfectly illuminate part of the room.
Naturally, the brightness of such a lamp cannot compete with full lighting; rather, it is intended to replace lit candles or a night light.
What is LED lighting
The dynamically developing production of LED lighting devices is confidently displacing traditional incandescent lamps, conquering the market with numerous advantages:
- Exceptional durability.
- High quality lighting (brightness).
- Safety.
- Economical energy consumption.
- Environmental friendliness.
- Resistance to humidity and temperature changes.
The essence of the work of lamps is to emit light from a semiconductor material under the influence of the movement of electrons. The manufacture of such devices does not require phosphorus, mercury or other hazardous substances. And during operation, burns are excluded, since the lamps do not heat up and consume a negligible amount of electricity (5-9 Watts).
What LED trees look like
The lion's share of the popularity of LED lamps can be attributed to their attractive appearance.
Glowing trees, whose branches are strewn with numerous sparkling lights, decorated with flowers, berries or other decor, evoke only the most pleasant associations with fairy-tale landscapes and fantasy films. In addition, owners of some devices have the opportunity to change the color of the shining lights, turn on the flashing mode, or get a design whose lamps play in several colors.
Depending on the purpose of the lamp and the style of the room or landscape, there are trees completely without decoration. Their lamps are not hidden by flower attachments, and the barrel is made with a minimum of unnecessary elements, which will fit perfectly into a high-tech interior.
Types of LED trees
When thinking about how to decorate your home or territory with a tree-shaped LED lamp, it is worth collecting information about devices of this kind in advance.
LED trees can be the most different sizes and types:
Some of these lamps can be purchased in full finished form, others need assembly and connection. For amateurs, there is an opportunity, in addition to purchasing a factory product, to make a similar device themselves.
Glowing trees: price and equipment
Of course, to get a complete picture illustrating the equipment of an interior or landscape with a bright LED tree, one cannot do without indicating the prices for such devices.
For fans of traditional shopping who prefer supermarkets, purchasing a lamp will cost a little more than buying from an online store or making it yourself. On the other hand, they will have access to such benefits of civilization as professional consultation, sales advice, home delivery and qualified installation.
Summarizing the prices offered by several major manufacturers, we can indicate the following prices:
The price of a finished lamp or garland with lamps is also affected by the color of the LEDs. Blue, white and yellow lamps are considered more expensive.
Those with “golden hands” will be able to save money by purchasing individual components, as well as self-made and installation of LED lamps.
Creating an LED tree at home
If you have even minimal knowledge in the field of electronics, you can quickly make a luminous tree with your own hands. Although you will have to put in some effort when selecting, purchasing and connecting components, even the most demanding hand-makers will be satisfied with the result.
There are two ways to create such decoration:
- Assemble luminous trees from prepared elements (stable base, frame, strip with diodes and decorative flowers).
- Solder your own electronic design using separate LED bulbs, wires and insulation.
The first method is much simpler and faster. It does not require the use of soldering iron skills and electrical circuits, since you just need to connect the prepared nodes of the device in a certain order. This is where creativity comes in the form of choice. color range future wood and in a unique combination of ready-made elements.
Choosing the second method and completely creating a luminous tree with his own hands, the master sequentially performs the following stages of work:
- Assembles the frame (pipes of different diameters, wire, wooden bases are suitable for this).
- Solders to wires LED lamps resistors and provides insulation of connections.
- Attaches LEDs to branches.
- Leads the wires to the power supply and attaches them using solder (using tin).
- Fixes the tree frame with lamps on the branches on a stable horizontal base.
When performing such work, you need to carefully monitor the correct polarity (+/-).
Decorating trees with LEDs
Glowing trees for the street look great as a single decoration or as an element of a bright composition (a decorated alley, garden, home).
One of the main advantages of lamps is their resistance to mechanical damage and exposure to aggressive weather factors. That is why they are so often used to decorate garden plots or areas near offices and shops.
A person’s desire to surround himself with comfortable and functional things is understandable and logical. Everyone wants to live in a good house or apartment, work in a well-furnished office. But for many this is not enough. I want beauty, celebration, emotions. Bright LED trees were created precisely for such connoisseurs of beauty in environment and the environment.
What are LED trees?
The design of the LED tree includes the following elements:
A frame imitating the shape of a tree or bush, made of a special light-alloy material, which is enclosed in a plastic shell.
Decorative elements in the form of LED garlands with silicone nozzles stylized as leaves and flowers.
The products are supplied with a 24V transformer.
These decorative lighting structures are quick and easy to install. They can have any color, size and appearance - from a small bush to a “giant” with a chic crown. Entwined with a large number of sparkling light bulbs, LED trees are very similar to real ones. They almost always become the central figure of the interior, local area or landscape.
What are glowing trees for?
The use of this type of lighting technology makes it possible not so much to solve lighting problems as to embody a large number of decorative ideas. With their help, you can easily create a surprisingly magical festive atmosphere. The alley of luminous trees seems to invite you into a fairy tale, causing delight, surprise and anticipation of a miracle even in adults.
If you install a glowing tree in your office or store, it will certainly increase the compliance of customers and the willingness of buyers to make a purchase. After all, the holiday atmosphere always gives joy, and a pleasantly excited person more easily agrees with the proposal made to him.
Most often, LED trees are used:
In decorative lighting of landscapes, territories and interiors;
To create bright avenues of light,
When registering to enter a restaurant, hotel, shopping mall, shop.
LED trees are very popular as New Year's decoration apartment, house or garden. They give a great mood to everyone who looks at them.
Features of this type of festive lighting technology
Unlike the "living" light trees do not require care or attention. Since LEDs have very long term service (measured in tens of thousands of hours), after purchase you don’t have to worry that the tree will soon fail.
Decorative luminous trees are not afraid of either frost or heat, and they are not afraid of rain, dew, or frost. Even if one or more elements fail, the structure will not stop shining.
When purchasing, the main thing is to decide on the type of LED tree that is suitable for your purposes.
To decorate your office desk, you can purchase a glowing cactus with a small number of small LEDs. It is better to decorate a large area with a tree several meters high and impressive in size, which includes a huge number of LED light bulbs. To create a light alley, low trees with a soft purple or blue glow are suitable.
How to make a choice?
When choosing LED trees, the following are important:
Manufacturer.
Brightness and power of LEDs.
Frame material (most often aluminum or steel).
The method of securing the tree at the installation site.
Type of power supply (autonomous or from the mains).
The variety of colors and crown shapes of LED trees creates a lot of opportunities to attract attention to the building, territory, and interior. If you want to quickly and originally decorate your office for a holiday, decorate your garden, or attract visitors to your store or entertainment center, best option I can't think of anything better than LED trees.
Margarita Sukach,
Illuminating trees is one of the most popular techniques landscape design. It simultaneously brings aesthetic pleasure and allows you to illuminate the garden area at night. There are several methods for illuminating vegetation: using lamps and spotlights located on the ground, attaching LED garlands to trunks, and creating LED trees. We’ll talk further about how to make an LED tree with your own hands.
How to use backlighting correctly?
Depending on the result you want to get from lighting the trees, one or another lighting method is chosen. In order for luminous trees for the street to look beautiful, you must adhere to several basic rules:
It is best to place the spotlights on the ground at some distance from the tree at a slight slope;
You can use several spotlights at the same time different types lighting: halogen and LED;
for not too tall trees and bushes, lamps that are screwed into the ground, which can also be moved from place to place, are perfect;
lamps can also be installed on a tree trunk, directing the light upward - this will allow the light to be scattered between the foliage;
when creating a luminous tree with your own hands, you need to take into account the density of foliage, the height and diameter of the plant, as well as its shape;
For overhead lighting, halogen or LED lights installed on nearby buildings;
In order for the plantings to cast a shadow on a vertical surface, spotlights are installed behind them at a great distance.
Application of LED garlands
If you want to create an LED tree with your own hands from an existing plant, then you just need to attach LED garlands to it, which are connected to the electrical network. Such garlands are divided into fruits, which look like large lanterns, which are located far from each other, and leaves - small light bulbs, located very densely (see photo). Submitted LED lights trees has many advantages, which include efficiency, long service life, resistance to low and high temperatures, atmospheric precipitation. With its help, trees can be made either monochromatic or multi-colored.
Self-created
Now let’s look at how to make LED street trees from scratch. First of all, I would like to note that luminous plants can be very diverse. This includes an LED sakura tree, palm tree, maple tree, and a variety of spruce and pine trees. So, the stages of work to create glowing tree look like this:
Tree diagram
First of all, the future plant must be drawn on a piece of paper, where you also need to indicate its height, diameter, length and number of branches.
Creating a trunk
The tree trunk is created very simply - just take a metal-plastic pipe and cut it to the desired height (see photo).
Construction of the frame
From wire of different thicknesses it is necessary to cut the required number of thick, medium and thin branches, and there should be as many of the latter as possible. For ease of installation, all branches are bent in the shape of the letter “L” and attached to the trunk.
Working with LEDs
Resistors are soldered to the LEDs, after which they are isolated. To do this, take electrical tape and a tube of approximately the same shade. The diameter of the tube should be such that the LEDs fit into it without problems. Attached to each such element electrical wire. Next, the LEDs are attached to the tree branches. In this case, the wires from smaller branches should be connected into a bundle and connected to the wires of thicker branches. As a result, all existing wires are soldered to the main wire and run inside metal-plastic pipe. At the same time, do not forget to isolate them.
Decorating twigs
In order for the glowing LED trees to look as natural as possible, leaves and flowers are cut out of plastic and taped to the branches with electrical tape, and the tree trunk is completely wrapped with brown electrical tape, as, for example, in the photo.
Tree installation
In order for the luminous plants to be stable, they are placed in a barrel, beautiful pot or any other container hidden in the ground. And in order for them to begin to please the eye, it is enough to connect them to the electrical network.
More detailed information on how to make LED trees with your own hands can be seen in the video presented.
