The Patriot petrol mower does not start. The petrol trimmer does not start. What to do? Why won't my lawn mower start?

The instrument, despite its small dimensions, is complex technical device. If you study the operating instructions, it turns out that the reasons why the lawn mower does not start are known and can be eliminated. It is necessary to consistently eliminate factors that make it difficult to start the tool. Usually they start with more accessible nodes with easy testing of serviceability.

All the reasons why a lawn mower does not start can be classified according to the specific operation of individual components. The service center classifies faults as follows:

engine malfunction (piston wear, bearing failure, crankcase crack);
Fuel mixture supply malfunction - clogged pores air filter or carburetor malfunction;
The ignition system does not work;
mechanical failure - leaking hoses, broken wires under the braid, rupture of tubes.

The user first needs to check whether there is fuel in the tank. Start up according to the instructions, placing the saw on its side. Set the air damper to the “closed” position, pump up the fuel, turn on the ignition and make 3-4 sharp jerks with the starter. If the engine starts, open the air damper. The lawn mower does not start - we repeat the operations with the air damper slightly open.

The brush cutter cannot work for a long time. The gearbox and motor will overheat. You can mow for no more than 15=20 minutes, taking a five-minute break. On a hot afternoon, the operating time is halved. When mowing weeds and sedges, the work time must be reduced.

If the launch fails, we begin to look for the cause of the failure:

check the quality of the fuel;
make sure the spark plug is working and the spark plug channel is clean;
check the cleanliness of the air filter;
make sure that the fuel filter is not clogged;
check the cleanliness of the breather;
clean the exhaust channel.

More complex reasons will be those detected during diagnostics of the malfunction, leading to major renovation carburetor Such reasons include clogging of the internal channels of the carburetor, wear of the gasket on it and a violation of the tightness of the internal halls with loss of vacuum. Repairing a lawn mower yourself if it won't start will require patience.

The fuel mixture must be prepared with exact adherence to the proportions of gasoline and oil. In this case, you cannot use another brand of fuel. To prevent dirt from getting in, gasoline should be kept in a glass or metal utensils 2 days. Cannot be used to store fuel plastic dishes. Measure the oil accurately using a medical syringe without a needle. Use only freshly prepared mixture, without leaving unused fuel in the tank. If the engine is capricious, the lawn mower stalls; when you press the gas, the fuel may be to blame.

The lawn mower does not start when hot - press the gas trigger and sharply pull the cord several times until the engine starts, then lower the trigger. If it won't start, it requires specialized repairs.

Checking the ignition system, if it does not start, is carried out sequentially:

Clean the removed spark plug from carbon and dirt, dry it, set the gap to 1 mm;
connect to a high-voltage wire and check for a spark by pulling the starter several times;
if there is no spark, check the high-voltage wire for integrity;
replace the spark plug;
dry the spark plug channel;
At the same time, the operation of the ignition coil is checked; it is faulty if the working spark plug does not spark.

It is in the event of a malfunction of the ignition coil that the lawn mower does not start hot, stalls, or operates intermittently.

Cleaning or replacing the air and fuel filter will ensure required consumption ingredients entering the carburetor. The air filter can be washed in soapy water or replaced. If nylon fabric is used, it is washed and the porous felt filler is replaced. The fuel filter is changed carefully, without leaving the suction pipe open. You can determine whether the air filter needs to be replaced if the engine starts with the air cleaner removed. A dry spark plug will tell you if the fuel supply grid needs to be changed if the lawn mower does not start.

Breather, a hole for admitting air into the gas tank. If it becomes clogged, a vacuum is created in the tank and the mixture does not enter the carburetor. The hole can be blown out with air or cleaned with a needle. Clean the exhaust channel and remove the muffler anti-spark mesh.

Carburetor adjustment and tuning

The maximum and minimum engine speeds and smooth idle are controlled by the carburetor. The stable operation of the lawn mower depends on the amount of supplied combustible mixture and air and their ratio. The lawn mower will not start if the carburetor adjustment is incorrect. The procedure for setting the device to supply fuel at low speed (L), high speed (H) and idle move(T) is adjusted by the screws of the same name:

The chainsaw must run for at least 10 minutes, since the adjustment is carried out while it is hot.
Screw H is turned smoothly to maximum speed, then turned ¼ counterclockwise, reducing the speed of rotation of the motor shaft.
The idle speed is adjusted with screw T, ensuring that the scythe does not rotate.
Screw L is adjusted by first opening the throttle as much as possible, and then smoothly reducing the speed to a stable minimum.

After adjustment, a serviceable one with cleaned filters and a checked ignition should ensure engine operation. If the carburetor malfunctions, after it has been repaired, the feed system will again need to be adjusted before starting the lawn mower.

Rare breakdowns that prevent the operation of a lawn mower can include:

rewind spring malfunction;
broken or stuck starter pulley;
faulty starter assembly.

The most important malfunction, the elimination of which is associated with engine replacement, may be failure of the engine piston group. The cost of repairs will cost approximately 70% of the cost of the product. This video will help you understand the reasons why the lawn mower won’t start:

Proper care of a chainsaw

There are no unnecessary phrases in the operating instructions; everything that is offered is aimed at trouble-free operation of the lawn mower. Cleaning all parts after each work cycle allows for easy removal of unhardened residues and dirt. Only cooled components need to be cleaned. This technique contributes to the quality of air cooling of the engine and gearbox.

To refuel, you must use fuel with the oil recommended in the instructions. If flammable mixture leave it in the fuel tank, the oil will float to the surface and land on the valve during startup, impairing its adjustment. The mixture may form sediment and clog the fuel supply in the carburetor.

When storing equipment for the winter, inspect it, lubricate the gearbox and piston system, wrap the entire saw in an oiled rag and store it in a dry place.

It is impossible, as it is dangerous for the tool and the health of the mower, to use a metal cable instead of a fishing line. It cuts more efficiently, but the load on the gearbox and engine increases. When a piece of wire breaks away, it flies at the speed of a bullet. Effective mowing can lead to rapid wear of the engine piston group. For greater efficiency When mowing, it is suggested to use a “star” fishing line profile.

Diagnosis of lawn mowers and elimination of causes - video

Gasoline trimmer does not start? Prerequisites and solutions using the example of Elitech T750

In general, a similar conversation should begin with the fact that after purchasing a garden power tool, it would be better to first read the annotation attached to it. Gasoline trimmer filter or buy a new one. The trimmer will not start. Then many problems could have been avoided. But since it happened petrol trimmer Not starts, then you need to find the sources of inoperability. And in this article we will look at the main reasons why trimmer won’t start using the example of the Elitech T750 model, and we’ll also tell you general tips for using such a tool.

Let's start with the obvious! Let's figure out how to start it right petrol trimmer. It may also be that the reason lies here.

First you need to move the red toggle switch on the trimmer rod to position “I”. This means the power is turned on. Then you need to switch the fuel supply lever on the carburetor and use the fuel “suction” button (it looks like a pipette, located on the carburetor). If the engine does not start at all or stalls quickly, do not trim the revs. This is necessary to supply gasoline to the engine. Return the fuel supply lever to its original position. Finally, pull the starter handle sharply towards you. Trimmer must earn it. Try several times if it doesn't work the first time. If after such manipulations the situation has not changed and petrol starts trimmer, then you should first inspect it yourself before taking it to the service center. There are two main reasons why a garden trimmer will not start:

Why won't a Chinese lawn mower or chainsaw start? Practice

Practical troubleshooting tips. From personal experience.

Not starts on a cold trimmer - eliminating the cause

Trimmer won't start to cold. Cause— air leakage, which prevents fuel from being pumped in. Petrol trimmer won't start, still won't start, cadet cc 98 b video... trimmer. To the camera.

Power supply failure.
No fuel.

The second reason why a garden tool does not work is that it has run out of fuel. On the Elinech T750 the fuel tank is located near the engine, but on most trimmers it is located there. We unscrew the cap from the tank and fill it with gasoline (the most best option AI-92, it is inexpensive and does not clog the carburetor like AI-76). Don’t forget to add special engine oil to the tank, 50 grams per gas tank is enough, without it the engine will start to “sneeze” and quickly become unusable. After closing the tank with a cap, wipe the surface of the trimmer and your hands with a dry cloth. Hitachi trimmer won't start. Repair, tools, despite their small dimensions. We also do the above manipulations to turn on the garden tools.

To the owner summer cottage You can’t do without a lawn mower or trimmer. But during its operation, situations may arise when this unit for some reason stops starting. And there can be many reasons for this. Let's find out why a gasoline trimmer won't start.

Why the trimmer won't start - reasons

To determine why a gasoline trimmer has difficulty starting or constantly stalls, you need to consistently check the operation of all the main components of the unit. It is especially important to do this after long-term storage petrol mowers. So, the main reasons for this behavior of the trimmer are as follows:

The culprit that the lawn mower does not start may be a poor-quality oil-gasoline fuel mixture. It must be prepared strictly according to the instructions. Saving here is not at all appropriate, since it can lead to failure of the entire piston group of the trimmer. You should not prepare too much fuel mixture, as excess gasoline will lose its quality over time.
You should know that gasoline trimmers of brands such as Stihl, Husgvarna and some others will not start if they are filled with cheap gasoline with a low octane number. Therefore, for such units it is necessary to use only high-quality high-octane fuel.
If the trimmer stalls immediately upon startup, then it may have a flooded spark plug. In this case, you need to unscrew it and dry it thoroughly for half an hour. Then drain the excess fuel that is in the chamber, clean the spark plug from carbon deposits, put it in place and try to start the lawn mower.
If your new gas trimmer won't start, it may be due to a lack of spark. This happens because the socket where the spark plug is located is dry and the fuel does not ignite. Lightly moisten with a few drops of gasoline threaded connection candles.
A gasoline trimmer may stall due to clogged air or fuel filters. It is best to replace such elements with new ones.
The exhaust duct and breather can also become clogged. By cleaning these trimmer elements, you can start the unit without any problems.
Another reason why a gasoline trimmer does not start, even when there is a spark, may be a clogged carburetor. To clean the channels and jets, you need to blow them with compressed air using a compressor.
Chainsaw wet spark plug: why and what to do

You can use a special flush to clean the carburetor.
If the carburetor gaskets are worn out, they need to be replaced. And if the tightness of this device is broken, you will have to identify the faulty carburetor part and replace it.
The trimmer may not start due to wear on the piston group. However, it is better to change such parts of the lawn mower at a service center.

Trimmer line - which one to choose?

Immediately after purchasing a grass trimmer, we are faced with a lot of questions - how to use it correctly, how to refuel it (if we are talking about a gasoline tool) and, of course, which fishing line is best to choose. Find the answer to the last question in the article.

How to quickly remove a stump without uprooting it?

Many gardeners sooner or later are faced with the need to cut down trees growing on their property. After this, stumps remain, and if the trees were of significant size, uprooting them is very problematic. The article talks about alternative ways getting rid of stumps.

Treatment of currants in the fall from pests and diseases

Almost every summer resident grows currants, which are loved because of their taste qualities And useful properties. It requires proper care, which includes treating plants from pests and diseases. The features of these autumn events are described in the article.

How to choose a gasoline grass trimmer?

A beautiful well-groomed lawn is a decoration for any area. And regular haircuts help maintain its attractiveness. You can't do this without a lawn mower or trimmer. In this article we will talk about the intricacies of choosing a gasoline trimmer.

What should you do if your chainsaw spark plug is flooded?

Most often this happens to beginners when, when starting up for the first time, they miss a “pop” on the closed air damper and continue to pull the starter handle, respectively, a lot of gasoline is produced in the combustion chamber, and not enough air prevents the gasoline from igniting.

The problem can be solved simply:

Use a spark plug wrench to unscrew the spark plug and check its condition. If the spark plug is wet and there is a spark, then it has been flooded. We open the air damper, turn on the switch button, squeeze the gas “all the way” and start it. The excess gasoline should come out of the saw's exhaust and the saw will start.
Use a spark plug wrench to unscrew the spark plug and check its condition. If the spark plug is wet and there is a spark, then it has been flooded. Turn the chainsaw over with the spark plug hole down and turn the starter ten times, while excess fuel will flow out of the engine cylinder. Then wipe dry (calcine) the spark plug, or replace it with a new one and try again to start the engine exactly following the operating instructions. If the spark plug is completely dry, this means that no fuel is entering the engine. And since there is it in the tank, then the problem is probably in the carburetor. You can take a little mixture into a syringe, inject it into the cylinder, tighten the spark plug and try to start the engine. But if the engine starts and immediately stalls, then the problem remains and you need to contact a service center.

You have no rights to post comments

Gasoline trimmer does not start - reasons

Many gardening Tools are useful and effective, but there are times when the technology refuses to work. Among them was a trimmer, which can mow both a miniature lawn and huge lawns.

Reasons why a gasoline trimmer does not start

There are different reasons, why the gasoline trimmer does not start:

The most common cause of breakdown lies in the wrong choice of fuel. Often, overly frugal users of the device fill the tank with something dubious, but not fuel with a normal octane number. Poor quality fuel that was kept in plastic canister long time, has a terrifying effect. A device that has lost its functionality for this reason is sent for a complete overhaul of the mechanism.
How not to get confused if your lawn mower won’t start
There is another common situation when a gasoline trimmer starts and stalls. The problem could be the spark plug or air filter. In the first case, after inspection it will be discovered that the candle is “thrown in”. This happens even if it has recently been wiped and dried. If everything is in order with the spark plug, then it is worth inspecting the air filter. Most often it turns out to be oily and needs to be replaced. If the device continues to refuse to start, then the problem lies either in a faulty ignition coil or in a clogged muffler.
The device can deteriorate not only due to low-quality fuel, but also due to improper handling. For example, the fuel has been checked, there is a spark, but the device does not start. The cause may be a spark plug filled with gasoline. To correct the situation, you just need to unscrew the spark plug, wipe it, dry it and check for functionality.
Sometimes this situation arises - a gasoline trimmer does not start when the spark plug is dry. Then it is necessary to lubricate the threaded connection with gasoline. It should be slightly damp, otherwise there will be nothing to catch fire.
Often, device owners find themselves in a situation where a gasoline trimmer has difficulty starting when hot. Some technicians claim that the problem is hidden in the ignition coil. Therefore, it needs to be changed, and the device will work. But the problem may also be overheating of the engine, especially if a reinforced knife like circular saw. To avoid such situations, you should carefully study the instructions, which specifically describe what types of disks can be installed.

The reasons why a new petrol trimmer does not start can be very trivial, for example, inability to use the device. If the user stores it correctly, uses high-quality fuel and does not leave gasoline in the trimmer, then the unit will serve faithfully for a long time.

Caring for personal plot, summer residents periodically encounter the fact that the lawn mower does not start. There are many reasons for tool failure. To correctly diagnose the problem, the owner of a useful unit at the dacha needs to know the structure and operating principle of its individual parts.

Since a gasoline trimmer is a complex device, you must carefully study the operating instructions before starting work. Very often they simply ignore her, or get to know her superficially. As a result, when the tool stalls or refuses to start, the question arises - “Why won’t the lawn mower start?” A long seasonal break in work, improper storage and untimely maintenance of the trimmer will cause a lot of trouble for the summer resident to eliminate the causes.

Where to start diagnosing a lawn mower

If the lawn mower does not start or stalls immediately after starting, it is necessary to sequentially check all the main components and assemblies. The verification algorithm is as follows:

Fuel tank (fuel quality);
Candle and candle channel;
Air filter;
Fuel filter;
Breather;
Exhaust channel.

These nodes are most often the source of the main problems, which can be eliminated after a thorough inspection.

Checking the fuel mixture

Before starting the gasoline scythe engine, check the availability and quality of the fuel mixture. Don’t save money, don’t be greedy, and don’t be “clever” in this matter. Repairing or replacing the piston group will cost you too much (sometimes up to 70% of the cost of a new tool). The oil-fuel mixture must be prepared strictly according to the instructions. Calculate its quantity based on real needs. The excess gasoline remaining after work loses its quality over time.

We diagnose the spark plug and spark plug channel

If the quality of the fuel mixture is not in doubt, and the lawn mower stalls when starting, then the cause may be a flooded spark plug. Here, a regular spark plug wrench (surely every motorist has one) and a spare spark plug are suitable for repairs.

We unscrew the candle and wipe it;
Dry it thoroughly (do not heat it);
We drain the excess fuel in the chamber through the spark plug hole and dry it;
We clean the old candle from carbon deposits using a file or a lady’s nail file;
We set the gap with a distance of 1 mm (you can check it with any coin);
We return everything to its place and try to start the trimmer.

You need to dry the canal for at least 30–40 minutes. Otherwise, there is a risk of re-filling a new spark plug.

If the spark plug is working, the socket where it is located is completely dry, and the lawn mower does not want to start, lubricate the threaded connection with gasoline. It should be slightly moist. No matter how wonderful a spark a candle produces, there is simply nothing to light up in a dry chamber.

If the trimmer engine still does not start, a reason such as lack of spark due to poor contact between the spark plugs and the high-voltage wire should be excluded. If the connection is good, but there is still no spark, most likely your ignition unit has failed. Here you won’t be able to do without a specialist, since the part is not repaired, but sold as a single unit.

Diagnostics of lawn mower filters

Another reason why a gas scythe stalls may be the air filter. To eliminate this, try removing the filter and starting the trimmer without it. If it works out, then you will have to change the air filter to a new one, or at least blow out and thoroughly clean the old one.

A gasoline trimmer may not start due to contamination of the fuel filter. This is the next stage of our algorithm. Here we check the condition of the filter element and, if necessary, replace it with a new one. When replacing, try not to leave the suction pipe completely without a filter; this is prohibited by any operating instructions. Haste can result in repair of the engine piston group.

Breather and exhaust channel

Often, “delicate” branded models of lawn mowers do not start and stall due to contamination of the breather. The main function of this element is to equalize the pressure in the gas tank. When this unit becomes clogged, a vacuum is created in the tank, preventing the supply of fuel. The problem can be resolved by cleaning the breather. You can use a regular needle for cleaning.

The normal operation of scythes with internal combustion engines may be disrupted due to dirt getting into the exhaust channel or clogging of the muffler mesh. This problem occurs on older generation models. The issue can be resolved by traditional cleaning and removal of the anti-spark mesh.

More complex reasons for lawn mower failure

If the step-by-step troubleshooting algorithm does not produce results, and your scythe still does not start or stalls, it is worth inspecting the carburetor and the engine itself. A clogged carburetor can be one of the reasons for unstable operation of the tool. There are three main problems here:

Clogged channels or jets. All this is cleaned with special washes or blown with a powerful jet of compressed air from a compressor. Do not use needles or wire, as the bores may be damaged;
Worn carburetor gasket. The solution is to replace the failed gasket;
Violation of tightness. To check this indicator, you can use a regular household tonometer, replacing the pressure gauge with a suitable one. Keep an eye on the readings: if they do not change, everything is fine, but if the pressure starts to drop, it means that some part of the carburetor is faulty. You'll have to find it and replace it with a new one.

If everything is in order with the carburetor, then the gasoline trimmer may not start due to wear on the piston group. If chips, scratches or burrs are found on the piston or cylinder, they should be replaced. Piston rings must be checked. A slight luffing of the piston when the connecting rod swings indicates that it is time to change the rings. This procedure is best left to the service center specialists.

Rules for operating and storing lawn mowers

In order for the lawn mower to start well in the future, you need to provide it with good conditions storage and operation:

During operation, carefully monitor the cooling system, carefully and promptly clean the channels in the housing, as well as the starter fins;
if necessary, use solvents, kerosene and other detergents for cleaning;
Do not clean the tool “hot” - let it cool;
strictly follow the operating instructions, otherwise you may overheat the engine;
if you do not plan to use the lawn mower in the next month, you need to drain the fuel mixture from it, because over time it breaks down into heavy fractions that will definitely clog the carburetor channels;
After draining the fuel, let the trimmer idle until it stalls, this will help completely remove the remaining working mixture.

Before winter storage do the following steps:

completely disassemble the braid, rinse and clean all the parts you can;
inspect the parts for damage, if necessary, eliminate distortions, tears, bends and any other defects;
pour a sufficient amount of oil into the gearbox and clean the air filter;
you can partially disassemble the motor, wash, blow and lubricate all moving parts;
in order to lubricate the piston, you need to unscrew the spark plug, use the starter to raise the piston to the dead center, pour a little oil into the spark plug hole and turn the crankshaft a couple of times;
If you store the lawn mower outside the house, wrap the engine with oily rags.

Remember, careful adherence to the rules will allow you to forget that it is difficult to start a lawn mower for several seasons.

Because he did his job. Why, there can be any number of answers to this question. Bad fuel is far from an argument. Maybe the person doesn’t know how to use it, so it doesn’t start correctly. There is no fuel supply, the spark plug is broken, the wires are broken, it’s not turned on, it doesn’t know how to use it, the trimmer is burnt out/broken, and you never know what other reasons there could be. There is also another one - hand hooks.

Reasons why Gasoline trimmer won't start, maybe several.

If the trimmer does not start or stalls immediately after starting, then the problem may be in the fuel tank (namely, the quality of the fuel), in the spark plug and duct, in the air or fuel filter, in the breather or exhaust duct.

1). Before starting the trimmer, be sure to check the availability and, most importantly, the quality of the fuel mixture.

2). The trimmer may not start or stall when the spark plug is flooded. It will need to be unscrewed and wiped.

You need to dry the candle channel for at least 30-40 minutes. Otherwise, the new candle may also flood.

3). If the trimmer starts up without an air filter, then it is better to replace the old filter with a new one.

4). The trimmer may not start if the fuel filter is dirty.

5). Also, the trimmer may not start due to contamination of the breather.

The reason may also be dirt getting into the exhaust channel or a clogged muffler mesh.

A gasoline trimmer may stop starting for several reasons at the same time.

Firstly: try cleaning the carburetor - its contamination leads to breakdown of the lawn mower.

Secondly: A vacuum may form in the barrel. If so, try making a small crack in the lid of the barrel.

Third: Check that the trimmer is set correctly.

There are several reasons why the trimmer will not start. I will list the main ones:

bad fuel. Each trimmer model requires gasoline with a certain octane rating. Check your instruction manual to make sure you are using the correct amount.
flooded candles. At the same time, I advise you to check the spark plugs for functionality. Sometimes even new (in the box) spark plugs may be inoperative or defective.
no fuel mixture enters the carburetor. Pump her up a little.
ignition coil is faulty.
muffler clogged. We need to free it from carbon deposits. To do this, you should carefully disassemble and clean (you can burn it on a gas burner).

Usually trimmer we have wouldn't start after winter, we used to take the trimmer to the workshop almost every spring, where they repaired it for us. But once, knowledgeable person advised us, firstly, to never leave gasoline in the trimmer for the winter, because old gasoline may be the reason that the trimmer does not start, and he also said that it is necessary to prime the carburetor to start the trimmer fuel mixture. After we began to follow these rules, our problems with the trimmer disappeared.
First of all, you can look at the candle. If necessary, replace it, making sure that the spark plug is not broken and produces a normal spark. The next problem will be hidden in the fuel system. As mentioned above, we check the tightness, then check the fuel filter, change it if necessary. We clean the carburetor and see the effect. It may be necessary to delve into the ignition system and configure it. For check fuel system you can pour a few grams directly into the cylinder through the spark plug holes, screw in the spark plug and try to start it. At a minimum, the trimmer should make the sounds of a running engine for 1-2 seconds and some smoke should come out of the muffler.
If your trimmer does not start at all or immediately stalls after starting, then you first need to look for the reason in the main components and assemblies, for this you need to check in the sequence below, so this is the sequence:
These nodes may be where the whole problem lies.
1) Check the fuel mixture itself
2) Inspect the candles and channel:
3) Inspect the filter:
4) Breather and exhaust channel:
But also a probable reason may lie in the following:
There may be several reasons. Among the smallest: breakdown of a spark plug or high-voltage wire. One of the unpleasant ones that you can’t always fix on your own is the electronic ignition unit that has failed. But still check for a spark on the spark plug or on the wire before taking it to the workshop. And even there in the carburetor, if there is no separate filter, there is a plug at the bottom, unscrew it and drain the fuel sediment, sometimes this may be the reason.
first of all, their fuel pipes burst ((fuel can’t be sucked in anymore, the switch may not be working properly, for example, mine doesn’t turn off well, it’s good that it’s not the other way around)), check the pipes, then unscrew the spark plug, see if it’s dry or flooded, lean it Pull the starter on the housing to see if there is a spark. It would be nice to have a spare spark plug, look at the power button, just look for a broken wire that might have frayed somewhere.
A gasoline trimmer is one of the most convenient and necessary things if you have a yard. The petrol trimmer itself is, in other words, an ordinary lawn mower, but very compact.
There are several reasons why a gasoline trimmer starts to stall. Let's look at the most common ones:
- low quality fuel. For some reason, many people believe that you can fill lawn mowers (chainsaws, etc.) with some stale fuel and nothing will happen. But that's not true. A poor quality mixture can simply kill the trimmer. Let’s skip what exactly can be broken by low-quality fuel, since there can be many options here and only a complete diagnosis will help. Let's take the simplest, but most common option - a flooded candle. If this is the reason, then you can take it out, wipe it and dry it.
- long storage. Trimmers are capricious. If it has been sitting for a long time, it may stall during the factory. Then let's do this