Lever press for pressing apples. Methods for making a press for apples with your own hands. To the idea of ​​​​making a do-it-yourself juice squeezer

Canning will help preserve country products. A juice press is needed to collect the most valuable fruit and create a supply of vitamins for the winter. Juicers are less productive. Prolonged contact with air and metal parts of the instruments oxidizes the beneficial components of the juice. A variety of models for spinning can be bought, often the device is made independently.

Types of presses, their difference

Common to all presses for squeezing juice is a perforated basket in which crushed fruits are placed, the mass is called pulp. The juice flowing down during the extraction must fall into the storage tray. Parts in contact with juice are made of hard rock wood, special plastic or of stainless steel. Aluminum under the influence of fruit juices loses protective film from oxides, dissolves.

Designs differ in the way energy is transferred:

• mechanical;
• pneumatic;
• hydraulic.

According to the energy source used - manual and electric. To prepare the material for pressing, grinders are used, which can be a separate device or built into the pressing unit. The amount of juice obtained at a time depends on the capacity of the basket. Home manual presses for squeezing juice work cyclically. The process continues from loading to cleaning the dry residue.

The filtering part consists of burlap, perforated pancakes, wooden gratings. Each type of fruit requires a different impact force. Citrus fruits and grass are the most difficult to choke.

The screw press pushes the fruit pulp and juice through a cylindrical sieve. The tapering cone allows high-quality extraction, beating off the seeds and peel. screw press, lowering and raising the crusher, a simple and convenient model with low productivity. Most often, screw presses for squeezing juice are made at home.

This principle underlies the apparatus for extracting juice from grapes; apples and pears are crushed with such a device. Depending on the needs, the stability of the frame, the capacity of the basket and the effort are changed.

If the screw piston is replaced with an elastic membrane, compressed air can do the work of pressing, the apparatus is called a pneumatic press.

To create pressure, a car jack for 2 or 3 tons can be used. It is installed from above or below, depending on the design of the apparatus. But the hydropress for squeezing Grifo juice will seem more interesting for housewives. The device is connected to tap water.

It also has a membrane, but it expands inside the perforated cylinder, squeezing out the intercellular juice from the pulp. Condition - the pressure in the water supply should be 1.5 - 2 atm, but this is the usual standard for supplying networks.

If you need to process large volumes, electric traction equipment will become indispensable. In this case, the screw mechanism can work like a meat grinder or press from above, turning the screw.

When working on the press, the pressure must be increased gradually, taking a break. At the same time, cell capillaries open better, the selection of deep layers carries the most useful components.

The price range for manual presses for squeezing juice from 10 thousand. The cost depends on the material, type and performance of the device. The cheapest are screw presses. The use of a hydraulic drive will increase the price to 19 thousand rubles. For a hydraulic press with a membrane unit, you will need to pay about 100 thousand rubles.

Homemade press options

The easiest way is to make a screw press. A gradual increase in head pressure on the pulp provides an optimal effect on the cells, destroying them as the fluid is taken. The device can be made of wood or metal. A basket with a tray for collecting juice into a container is installed on the base of the frame. The entire interior of the basket is covered with filter material. The pulp is laid, closed with the remnants of the fabric. A circle is lowered to the surface, on which the press presses when the rod moves. To make a juice press with your own hands, as in the picture, a drawing will help:

1 - clamps; 2, 3 - frame with crossbar; 4, 5 - a screw pair with a fixed circle.

To collect the juice, an enamel pan with a soldered hole for draining the juice is used. Inside you need to install a perforated basket, a tank from washing machine. It is necessary to arrange external stiffeners in order to install the basket in the center. When laying the pulp, spacers are used to create uniform pressure on small portions of the pulp. It is possible to fill the cavity with filter envelopes laid flat. A wooden circle should be placed under the metal basket from below so that the pressure does not destroy the outer pan. In one cycle, within 5 minutes, the screw press will squeeze out up to 1.8 liters of juice.

A material that can withstand a large load during pressing can be a bag of sugar. You can use nylon lavsan stockings, polyester or new cotton, linen fabric.

If it is not possible to grind a screw pair, you can use a jack, which is in every household.

IN wooden structure between wooden frames stack bags of filter material. The pulp is placed between the drainage frames, the juice flows into the pan. It is clear that the textile is chosen strong to withstand the pressure of the press. There are no metal parts in such an apparatus, the juice comes into contact only with wood. Therefore, you can not take resinous rocks, so as not to "flavor" the product. Need oak or beech bars. Frame boards must withstand pressure, be thicker than 20 mm. The separation of juice in this press is 70%.

The design of a do-it-yourself juice press from a bottom-fixed jack is more complex.

The screw part on top is only needed to fix the cover. The movable support platform lifts the tank up on the skid. There is no limit to the imagination of the masters.

A wedge press is used to extract the juice. The simplest device works on the principle of squeezing a bag of pulp placed in a cone of boards. When the angle narrows, due to the retractable wedges, the planes of the boards tend to connect, the bag shrinks, the juice flows down into the substituted vessel. At other times, goats are used to prepare firewood.

Principles for choosing a press for obtaining a portion of freshly squeezed juice

At home, to get a fresh product, using a press saves a lot of time compared to a juicer. The simple device is easy to clean and does not require much storage space. On the basis of pressing, Turkish-made Maskot juicers work. The fruit is cut in half, loaded into a bowl and the output is clarified pomegranate, orange or grapefruit juice. The frame of the press is cast iron coated with silver. Lever presses are used.

Pressing allows you to select all the useful cellular substances, the juicer leaves half of them in the waste. The work of the press is always silent, in contrast to the annoying buzz of the juicer. It is convenient to get a morning portion of freshly squeezed juice by pressing. That's why compact units become everyday kitchen utensils.

Do-it-yourself juice press - video

Processing the harvest of berries and fruits is one of the most important tasks that not only farmers, but also owners of household plots have to solve. TO technical devices, which greatly facilitate this process, is a juice press, which allows you to quickly and without significant physical effort to turn fruits and berries into tasty and vitamin-rich juice. There is a wide variety on the market today similar devices, but those home craftsmen who want to save on their purchase may well make such a press with their own hands.

Principle of operation and types

All presses for squeezing juice from various berries and fruits can be divided into four main types:

• mechanical devices;
• hydraulic presses;
• electrohydraulic models;
• pneumatic devices.

The most common due to the low cost and simplicity of its design is a mechanical press. manual type. One of the main elements of its design is a perforated basket, in which crushed fruits (pulp) or berries are poured to squeeze the juice. Fruits and berries are squeezed out in such a device with the help of a piston, the lowering of which (and the creation of the required pressure) is carried out by rotating the handle, which drives the screw mechanism of the press. The juice formed during the piston pressure flows through the holes in the basket into a special tray, from where it is then poured into another container.

For the manufacture of a basket into which the raw materials for juicing are loaded, sheet stainless steel or hardwood (for example, beech) can be used. In the second case, the design of such a basket is a drainage grate, consisting of two equal parts, interconnected by metal hoops.

A modernized and, accordingly, more efficient version handheld device is a hydraulic press that can be used to extract juice from apples and berries. Instead of a perforated container, the design of such a press uses several drainage frames made of solid wood. The crushed raw materials from which it is necessary to obtain juice are placed in fabric bags and placed between such frames, which are subjected to significant pressure (1–5 tons) from above, created by a manual hydraulic jack. Using such a pressing mechanism, you can get up to 70% of the juice from the total mass of the processed crop.

A hydraulic press does not necessarily involve the use of a jack as a mechanism that creates the required pressure. So, in one of the designs of such presses, an elastic barrel-membrane is used as this mechanism, expanding under the influence of water supplied to it at a pressure of 1.5–2 atm from ordinary water supply network. Expanding, such a press membrane acts on fruits and berries placed in a perforated basket, squeezing juice out of them, which flows through holes in the walls of the basket into a storage tray.

According to the above principle, a pneumatic press for squeezing juice also works. The only difference is that the expansion of the barrel-membrane, which is also present in its design, occurs not under the influence of the water filling it, but under the pressure of compressed air supplied from the compressor.

Since certain types of raw materials from which it is necessary to squeeze the juice are loaded into the presses in crushed form, it is necessary to mention the devices that help bring it into such a state. The design of the simplest grinder is a steel drum, the walls of which are made in the form of a grater. Such a drum, which turns the raw material loaded into it into small crumbs, is placed in a casing with a loading neck. This simple and effective mechanism is driven by the rotation of a special handle. There are also more efficient and productive models of such units that are started using an electric motor.

If we talk about the productivity of mechanical presses for squeezing juice, then it is quite small and can be in the range of 10–30 l/h. However, this performance is quite enough for devices used for domestic purposes.

In order to increase the percentage of juice yield from squeezed fruits and berries, as well as improve its quality, two methods are used:

• raw materials are loaded into the presses in fabric bags that act as filters;
• squeezing out the juice is carried out by means of drainage grates made of wood, or by means of stainless steel "pancakes".

The use of drainage grates or “pancakes” ensures that juice is squeezed not only from the upper and lower, but also from the middle part of the compressed volume. Bags, as mentioned above, act as filters and allow you to immediately clean the squeezed juice from the pulp.

In cases where performance hand press it is not enough to get juice, electric machines are used. The electric drive can be seen in a screw press for squeezing juice and in screw-type units operating on the principle of a conventional meat grinder. In the first case, the press drive is a pair of "electric motor - hydraulic jack».

In screw presses, which are structurally reminiscent of a conventional meat grinder, the drive motor is directly connected to the working body - the screw. Such a press is used for squeezing grapes, it is also an excellent press for fruits, berries and squeezing juice from tomatoes. It works according to the following principle: the loaded raw material is crushed by means of a screw and forced through a sieve having a conical shape. This shape of the sieve allows not only high-quality juice extraction, but also to beat off the seeds. It should be borne in mind that grape or any other juice obtained at the outlet of such a press has a large amount of pulp.

Prices for serial models of juice presses depend on several factors:

• the volume of the loading basket;
• device type;
• material of manufacture;
• productivity of the press in terms of juice obtained per unit of time.

The cheapest, of course, is a small-capacity home press operating on the screw principle. The cost of a hydraulic juicer is slightly higher. Next in the price category is a press juicer for processing apples and other raw materials, working using compressed air. The most expensive on the market today are membrane-type hydraulic crushers.

Do-it-yourself juice presses

It is quite possible to make a juice press with your own hands, the main thing is to find work schemes and drawings of such homemade products, which will not be difficult. Many of those home craftsmen who already have experience in manufacturing such equipment are happy to share photos of their devices and even videos showing the process of their manufacture and the principle of operation in detail.

Most often, they strive to make presses with their own hands. screw type. Meanwhile, it should be borne in mind that it will not work to make a powerful screw for such a device without the involvement of a qualified turner. It can be made without third-party specialists if you replace the screw mechanism with a conventional jack (mechanical or hydraulic), which is in the arsenal of every motorist.

Main bearing element a do-it-yourself juicer is a frame. Its strength should be given Special attention. For the manufacture of such a frame, which will rest against the jack and create the required pressure, you can use a square metal pipe with a section of 40x40 and a wall thickness of at least 3 mm. When calculating the height of the frame of your homemade press, you should take into account the total thickness of the drainage grates, linings and bags of raw materials, as well as the height of the jack. The width of the frame can be chosen arbitrarily - the main thing is that a storage tray is placed in the opening created to collect the squeezed juice.

When creating a do-it-yourself apple or grape press design, special attention should be paid to its stability. To effectively solve this problem, three segments can be welded to the bottom of the frame square pipe, which will act as legs and ensure the stability of the unit. A stand made of boards or wood board is placed on the top of the legs, on which the pallet will be placed.

Drainage grids, complete with which your apple, grape or any other press will work, should be made only from hardwood (oak or beech). The thickness of the boards from which such gratings will be made must be at least 20 mm.

The basket of the press is made of oak planks (you can buy parquet boards), tightened with corners with small gaps and fixed with stainless steel screws.

Bags in which apple pulp or other raw materials for squeezing juice will be placed can be made from various fabrics (the main thing is that such a fabric is highly durable and the bags that are sewn from it do not break under the influence high pressure created by the jack). As such fabrics, in particular, you can use ordinary burlap, jute, cotton and linen fabrics, chintz and synthetic materials.

" Apples

Apple trees periodically give amateur gardeners such a large-scale harvest that the excess fruit has nowhere to go. In addition to jam and compotes, there is another option for processing fruits - juice. But many do not associate with this type of blanks due to the high labor intensity of the process. Ordinary household juicers simply cannot cope with a large amount of raw materials, and not everyone is ready to buy a professional device for the season. But there is great option- quickly and efficiently squeeze juice from apples on a do-it-yourself press.

To make a standard press yourself does not require special skills and drawings. Anyone can measure, saw off a rail, hammer a nail or screw a nut if desired. It is not necessary to own a welding machine, any design can be reproduced in wooden version with common garden tools .

For the manufacture of home press from the tools you will need a hacksaw for wood and metal (or a grinder), welding machine, screwdrivers, pliers, hammer. As for the materials, the following are mainly used:

• metal channel;
• wooden bars, slats, boards;
• self-tapping screws, bolts and nuts;
• tank or barrel, stainless steel sheet;
• bench screw and nut, valve, threaded rod or jack - depending on the chosen design;
• durable fabric with good drainage properties for bags for apples: coarse calico, cotton, jute burlap, linen.

It is better to make wooden elements from oak, birch or beech, since materials from biologically active tree species (spruce, pine) can change the taste of juice. Under no circumstances should drainage grates be made from chipboard: fine dust impregnated with phenol-formaldehyde glue will get into the product.

Types of structures: diagrams and drawings

The main thing in the press solid foundation and working mechanism.

The principle of operation of the device:

• layer by layer through the drainage gratings the prepared raw material is placed for pressing(chopped apples) in cloth bags;
• by means of a mechanism oppression descends from above and squeezes juice.

A good press squeezes out 65-70% of the juice, leaving an almost dry pulp. It is quite possible to make one with your own hands.

The designs of a homemade press differ according to the principle of operation of the main mechanism:

1. Screw.
2. Based on the jack: mechanical and hydraulic.
3. Combined.

In the bulk of structures, the pressure is from above, but in the combined version, compression goes in two directions: using a screw mechanism on top and a hydraulic jack on the bottom.

Juice press consists of the following parts:

• sustainable bed;
• square or cylindrical frame, inside which sacks of chopped apples are stacked;
• wooden lattices, with which the bags are shifted so that they do not spread;
• piston-gne t, directly exerting pressure on the cake;
• thrust bearing for a jack;
• working mechanism: screw with handle, mechanical or hydraulic jack;
• bowl-tray.

The main body can be:

• single perforated: juice through the holes will flow down the walls and through the bottom into the pan;

• double: a solid casing with a slightly larger diameter is put on a perforated metal cylinder;
• in the form of a solid metal body with one drain hole at the bottom;
• assembled from wooden slats connected by hoops, − barrel. The walls at the same time perform the functions of a drainage grate.

Corps may not exist at all.- just a pyramid of wooden lattice frames in a tray with a mouth at the bottom, under which a container for juice is substituted.

This design easy and quick to install. For the bottom plate, you can take a piece of countertop, for example.

Worm mechanism or hydraulic jack: what to choose?

The screw (worm) mechanism in the press is implemented in the form of a large screw (threaded axle) with a nut or a mechanical jack. The latter option is much simpler - you can buy it in a spare parts store or get it out of the trunk of a car, you don’t need to look for anything, adjust, grind and weld.

Structures based on a hydraulic jack are much more productive(force from 1t) than mechanical ones, and require a minimum of labor costs on the part of a person. Bottle hydraulic jacks make it possible to squeeze juice quickly and in large volumes. They fit comfortably into any design.

You can design a press with a removable mechanism, then you don’t have to specially buy a jack, but you can use the attendant in the trunk. After all, the harvest of apples is not good every year.

Making a press with your own hands

The press needs a stable strong support - a bed. The simplest is to assemble it from wooden blocks with screws. For the manufacture of a metal bed, you will need a welding machine and a channel.

The dimensions of the frame depend on the diameter of the working body or the parameters of the drainage gratings. Therefore, if a hull structure is planned, then you need to prepare the container in advance.

The simplest frame press with a worm mechanism

Welded stable construction. A hole for the screw nut is cut in the center of the upper channel (you can use an old bench or order from turners). The nut is welded into the frame.

Then assembled wooden drainage grate, which is two layers of slats stuffed perpendicular to each other. The thickness of the rails is not less than 20 mm. It is also necessary to install a stand from the bars. A retainer for the pressing part of the screw is attached to the top board - any metal part that is suitable in shape (can be put on epoxy glue).

The tray is made from stainless steel sheet., in front of the spout-drain is bent. It remains to substitute a pan or other container. The result is a press.

Bed for hydraulic press assembled according to the same principle as for the screw. As a case, it is easiest to take a ready-made metal or wooden barrel. A hole is cut out at the very bottom and equipped with a drain spout.

If wooden barrel not quite tight - even good. The juice will merge in several directions at once, in the end it will still end up in the pan. It is better to put a plastic casing on top of such a design. larger diameter so that there is no splash.

You can make a wooden case yourself:

1. It will take: several planks of equal size (parquet can be used), two strips of stainless steel and self-tapping screws with an anti-corrosion coating.
2. Boards from above and below are screwed with self-tapping screws to stripes at a distance of approximately 10 mm.
3. Strips with boards are bent in the form of a circle, the ends of the strips are fastened with bolts.
4. A plastic bowl of a suitable diameter can be used as a pallet with a drain for juice cut out at the bottom.

Another important element is the jack stop.. It is usually made of wood: you need to knock down the slats and cut out a circle slightly smaller than the diameter of the working body from the resulting canvas. You can use a grinder to cut a support out of a stainless steel sheet.

Drainage pads are made in the same way as in the description for the screw press, but they are given a round shape.

As a result, the design should be something like in the photo.

Raw material preparation

The principle of pressing apple juice simple - the finer the raw material is chopped, the more product will be the output. It is best to use a special chopper (crusher), since it is theoretically possible to finely chop several buckets of apples by hand, but in fact it is difficult to implement. An electric meat grinder for large volumes is also not an option: it roars, howls, heats up, and as a result, it may burn out. A suitable crusher can also be made independently.

The simplest design of a homemade crusher

From moisture resistant plywood or sheet stainless steel, a deep bunker is mounted slightly on the cone. Two bars are attached to it for stability from below. A wooden roller (preferably made of beech) with self-tapping screws wound in a spiral cuts into the lower part of the container. As a drum, you can use an ordinary kitchen rolling pin. The axis of rotation of the roller goes out, a drill is inserted into it and the process begins.

Some simply crush apples in a bucket with a construction mixer.

The process of squeezing juice from apples at home

After the raw material is prepared, it laid out in cloth bags or wrapped in pieces of fabric according to the principle of an envelope. Next, the bundles are placed in a container, basket, or simply at the bottom of the structure in layers through drainage grates. Fits about 3-4 bags. Oppression descends from above, the juice flows into the pan. When the push-up process is completed, the pulp is taken out, the next batch is loaded.

The remaining cake after quality pressure usually goes dry and pressed into "tablets" (photo 16).

The pomace is best disposed of in compost heap. Worms reproduce very well on such material, creating valuable fertilizer for the garden.

The resulting juice can not only be drunk fresh, but also prepared for the winter:

• pasteurized rolled juice;
• apple wine several types;
• apple cider.

Apples are a very valuable product for health. It is extremely imprudent and wasteful to bury and give the neighboring pigs the surplus of the crop. Having built a couple of simple devices, you can quickly and easily process all the fruits. And in winter it will be so nice to get healthy and tasty amber drinks from the cellar or refrigerator!

An apple press allows you to make juice from fruits or make apple wine with your own hands by pressing. The basis of apple drinks is exactly a portion of juice, because your the main task- Squeeze out a delicious liquid from apple fruits.

All presses designed for squeezing apples and other fruits in order to obtain juice can be divided into several types:

• Manual (mechanical). The main work is done through physical effort. At the same time, mechanical-type wringers are the easiest to assemble;
• Hydraulic. The hydraulic juicer operates on the basis of a hydraulic pump that creates pressure for squeezing juice from fruits and apples;
• Pneumatic. The principle of operation is similar to hydraulic devices, but air is used instead of water. It is pumped with a compressor, carrying out the processes of squeezing fruits;
• Electrohydraulic. The most effective types of fruit pressing devices. The work of such apple presses is based on hydraulics and electrics. With your own hands, you only need to load the raw materials.

According to the scope of application, all apple pressing devices are divided into two categories.

1. Household. It can be a simple screw unit, where the process of squeezing fruit is carried out due to physical effort. Also, a household juicer can have a hydraulic and electric drive. The Bogatyr juicer is in great demand among those who make apple juice at home. The Bogatyr juicer costs about 5-8 thousand rubles. At the same time, you can make a full-fledged analogue of household factory presses with your own hands.
2. Industrial. Normal screw design press in conditions of large-scale processing of apple juice is indispensable. This will require a conveyor belt. Belt press feeds a large number of fruit for further juice production. The belt conveyor has increased productivity, which is tens or even hundreds of times higher than the performance of self-assembled household presses.

Product preparation

To obtain high-quality apple juice, competent preparation of the fruits themselves plays an important role. You need to do everything right so that your Bogatyr juicer or its homemade counterpart performs the processing efficiently and efficiently.

The essence of preparing apples for juice production is to follow a few simple recommendations.

1. Prepare a container that will serve as a container for storing apples before sending them to the press. This is where you will place apples that are already directly ready for juice production.
2. Provide your work area with plenty of clean water. The optimal solution is a hose with reasonably good water pressure. If processing is done at home, apples can be poured into the bathroom.
3. Wash the apples thoroughly, removing all branches, leaves and ponytails.
4. Depending on the equipment used and the characteristics of the juice recipe, you will need to peel and cut apples.
5. Obtaining pure high-quality juice implies the need to cut apples into 2-4 parts, removing the core from them.
6. In some cases, it is recommended to take a sharp spatula and crush the chopped prepared apples in a container. This will make small pieces of pulp from apples. So they will stand out even more juice. But the use of some presses does not require these measures. Apples can be loaded into the Bogatyr juicer simply chopped and peeled.

Production of a press juicer

Making a press with your own hands, when you have photos, drawings and video instructions in front of you, is not difficult. A simple but effective juicer allows you to make a large amount of apple juice, using raw materials as efficiently as possible.

Yes, a factory juicer can outperform homemade press by performance. But not everyone wants to pay about 10-20 thousand for equipment. Buying a factory juicer is relevant when you plan to process a large number of apples. That is, the cost of acquiring the device will pay for itself over time.

For domestic use You can make a great homemade juicer. We offer you instructions for making a structure that allows you to make high-quality juice from apples.

The presented homemade juicer consists of several main elements:

• Frame;
• Pallet;
• Barrel;
• Piston;
• Power point;
• filter cloth.

We will tell about each of the components of the juicer separately.

1. The frame and base are made of metal profiles by welding. When making the upper horizontal part of the frame, use a strong profile that will cope with the estimated loads. Lay on the base plywood sheet. A pallet with a keg will be placed on it. Provide protection against corrosion and decay by covering the metal with paint and the plywood with a varnish composition.
2. You can use a ready-made plastic pallet. Pallets from flower pots. Finding a component of the required size is not difficult. Make a hole in the side of the tray by inserting a tube for the juice to flow out. But plastic pallets can break. An alternative solution is stainless steel pallets.
3. The material for the manufacture of the barrel can be a perforated tape made of galvanized metal or non-glued timber. If you use a beam, leave a gap between the strips no more than 5 mm. Wood is recommended to use from species of beech, birch or oak. But pine and other resinous trees should not be used for these purposes because of their biological activity. Resin can impart off-flavours and bitterness to the juice.
4. Piston. From wooden planks make a square. In this case, two layers of boards are needed, located perpendicular to each other. Having obtained a square, cut a circle out of it using electric jigsaw. Round the edges gently with sandpaper or a file. So he will not get stuck in the barrel. When making a piston from boards, be sure to use oak, birch or beech. Biologically active resinous tree species are out of place here. A metal pancake can act as a substitute for a piston circle from boards.
5. Power point. The optimal solution for self-manufacturing apple press will be a hydraulic jack. Its capacity of 2 tons is enough to cope with the production of apple juice. Hydraulic jacks have a small piston stroke, so you will need to make additional boards that should be placed under the jack. Use a galvanized stud for the screw. A handle is welded to the stud, and a nut to the frame. It will rotate the screw.
6. filter cloth. To get juice and not applesauce, you will need to separate the liquid from the pulp. Simple and effective solution there will be a fabric that carries out the process of filtering the juice. A high-quality and durable fabric with a mesh structure is suitable as a filter material. Vivid examples are polyester or lavsan.

Apple juice is a favorite product of many. It can be obtained from apples growing in your garden. Assembling a homemade press is not difficult. If you need a lot of apple juice, buy an efficient and reliable factory press juicer.