The garage is the holy of holies for any car enthusiast. Almost every man who is the proud owner of a garage spends perhaps more time in it than at home with his family. Car enthusiasts and masters of their craft use this kind of premises for work, repair of cars or other equipment, the production of furniture or various useful things for the home, as well as just friendly gatherings with friends. To make your garage as comfortable and functional as possible, men are ready for anything. In this article we will give some interesting ideas on how to make it yourself and thereby simplify your leisure time in it.
To get started you need. In order to properly equip the garage and rationally use all of its rather small space, you can use the following garage homemade products:
- Shelving or stands along the entire length of the wall;
- Shelves (closed or open type);
- Tables with cabinets;
- Overall drawers or shelves for storing large items;
- Hooks and hooks for hanging objects;
- Secret drawers or shelves;
- lockable drawers;
- Metal frames for storing spare wheels and replacement tires;
- Steel meshes;
- Inspection pit for car repair;
- Cellar or cellar for storage of vegetables and conservation.
And now let's look at how to make some of the listed crafts in the garage with your own hands.
Shelves
Such convenient devices, as shelves can, of course, be made of wooden boards and metal fasteners. And you can use the life hacks of other motorists - make shelves for storing nails, screws, bolts and nuts from plastic bottles:
- If you need open holders for all sorts of small things, then you need to cut the base of a plastic jar or small bottle in half, without touching the threads. Then the thread must be screwed into the lid of the container and the outer side of the lid must be glued or screwed to the wall so that the cut-off part of the bottle looks up. As a result, the remaining part of the container will serve as a kind of holder for various kinds of stuff.
- The same small parts and materials can be stored in closed plastic containers. To do this, it is only necessary to glue or screw their lids to the shelves from below so that the can is in a vertical position. When you need to take something from the container, it will be enough just to unscrew it from the lid.
- In general, any home or building material can act as a shelf in the garage. So, for example, cut sewer pipe or a cardboard cylinder mounted on a wall or ceiling can be used as a great place to store long items. And the halves plastic containers fir trees screwed to the wall will serve as convenient pockets for discs for grinders.
Shelving
In order to store tools, things and various accessories of the owner of the garage, it is advisable to equip it with a large and durable rack. This kind of homemade in the garage can be done in several ways:
- The most reliable is a rack made of metal and wood. Steel rails provide a solid base and support for wooden shelves. Shelves made of steel will be even stronger and more durable.
- You can also make a rack with your own hands in the garage completely out of wood. To do this, you need a medium and thick board (19cm). It is necessary to cut supports for the rack from the middle board, and to make shelves from the thick board. It is necessary to fix all the details of the structure with screws, and open its surface with oil varnish.
- The most budget homemade garage racks can be made from 50x100 timber, 50x25 boards and plywood. The timber in this structure will act as legs, boards - transverse guides, and plywood - shelves.
Attention! It is not necessary to place on a do-it-yourself rack tools and things whose total weight exceeds 500 kg. This kind of useful home-made for the garage is designed to withstand a mass of up to 200 kg.
boxes
One of the "Kulibins" became the author of such an invention as boxes in the form of cropped plastic cans. If the canister is carefully cut off side wall and put it on the opposite side of the shelf, then such a container can easily turn into drawer with a handle.
Frame for storing winter tires and wheels. Such a frame can be equipped with metal corners. The corners must be connected to each other with any metal-roll product. If a suspension frame for wheels is planned, then two triangles must first be built from the corners, which will subsequently be connected by two more corners. The connecting corners will act as wheel holders, so the distance between them should be such that the wheels do not fall into it, but only sag a little. If it was planned to make a standing rack for wheels, then a rectangular frame is simply made from the corners.
Other homemade
Here are some more homemade things that you can build in the garage with your own hands:
Let's hope that thanks to the photos in the article, useful tips and instructions, you can easily build homemade crafts with your own hands for a garage or other utility room.
In today's story, we will introduce you to a few tips and rational recommendations for arranging a garage parking space that will help cottage owners save square meters and things.
Let's take a look at 10 easy DIY ideas for .
You can easily and quickly install some wire containers on the wall to store various things in them. The rational arrangement of balls and hoses is another easy way to organize all the items and products that easily create chaos and dust if they are not sorted into compartments and containers.
2. Plates and inscriptions
It can be stickers or full painting of doors and cabinets. unusual furniture coated for special markings. They will help family members navigate the space of the garage, and also store items and products in a certain place. The main advantage of this decor method is the speed of implementation, which will take only a few hours!
3. The magic of magnets
For small tools and drill bits, you can use magnetic strips on a free wall area. On them you can hang small parts and fixtures that will always be at hand. This is a simple way to organize the room and storage systems in a practical way, and it is also extremely easy to perform.
4. Original hooks
Take long-unused keys and turn them into hooks for wall decor and as an original authentic accessory. On them you can hang work clothes, ropes and everything that should be easily accessible.
5. Cans and other containers
You can organize and separate the nuts and bolts by adding some plastic toolbox containers. This will make it much easier for you to find required part or element. All products will be sorted and placed in certain containers, and for added convenience they can be attached to a wooden shelf.
6. Patch panel or board
Of course, you can always put in a perforated board, where you can easily add some new hooks and reorganize the space in your home decor. In addition, such an organizational idea can act as a “transformation” of a wall for a garage box! Tips and tricks for using this multifunctional tool can be found on the Internet portal Small Interiors.
7. Practical buckets
Some shelves and a large set of segments (stickers) can really come in handy. This is another one fast way forming a functional and rational area for placing things that will add a distinctive style to Interior Design and help keep order among working tools.
8. Bungee balls
The use of spring cords to store equipment for a variety of sports is a great concept for transforming a space. You can place both footballs and basketballs in these stylized nets! They are commercially available and extremely easy to install.
With this creative smart layout idea, you will have absolutely no excuse why kids don't wear helmets during and after school on bike rides and rides. After all, now you need to contrive not to find them in a specially equipped place! Complement wall decoration small hooks on which these safety devices will be located.
Instead of throwing water bottles and cardboard boxes in the corner of your garage, build a quick and easy waste station for the whole family. It can be built using plastic boxes and boxes with inscriptions that allow you to sort garbage into plastic and iron.
We have presented to your attention an interesting and extraordinary selection of conceptual ideas and creative solutions for organizing a garage space in an unusual house.
Did you like these rational and practical ideas? Share your thoughts on this with us in the comments below...
Categories:Locations:
With proper arrangement of space, a garage can serve not only for parking a car, but as a workshop for its maintenance. In addition, a properly planned space will easily accommodate the tools required for this, provide storage for technical fluids and wheels in the off-season. The functionality of the room will allow you to expand the accessories for the garage with your own hands, which you can make from improvised material or purchase in specialized stores with subsequent refinement to suit your needs.
How to organize the interior space of the garage
Considering the fact that the number of things in the garage will increase over time, it is worth rationally using walls, floors, basement(if available) by equipping them the maximum number shelves, hooks, racks. For skilled people determine workplace, equip it according to needs.
Storage of bulky items
All items that occupy the space of the garage are conditionally divided according to several characteristics: large and small, required constantly or used once or twice a year. Depending on this, before starting the arrangement of the space, they work out a list of large things that are not often used, which include:
- winter, summer wheels;
- bicycles;
- skis.
Garage bike rack option The list may be longer, perhaps the owner of the garage loves locksmithing, then in his arsenal there will definitely be long pipes (plastic and metal) of various sections, bars and boards. For compact, orderly storage of bulky items, garage home-made or purchased fixtures are used, for example:
- Acquire wall holders for bicycles that allow you to store them in an upright position, which provides significant space savings;
- For rubber sets, special shelves are equipped, on which each wheel lies separately. They are located in any convenient location, for example, under the ceiling, along the wall or, capturing the corner space, or suspended from the ceiling or wall on an appropriate support, previously cleaned of dirt, packed in special covers. This method of storing tires is only suitable for kits on disks. Considering cases when tires without disks are stored, a rack is welded from metal, on which the tires stand vertically in one row. Place the device under the ceiling or on the floor, securely fixing it;
- With the help of homemade mounts, they provide a compact arrangement of skis, ski poles and other sports equipment.
Attention! A place should be provided in advance in the upper third of the wall for storing a removable trunk.
In addition, craftsmen make various suspended ceiling structures that are parallel to the floor to accommodate long objects, such as pipe cuts or beams.
Devices for small things
For many craftsmen, the number of different-sized screws, nuts, bolts, washers is measured by a bunch of boxes and buckets, in which it is extremely difficult to find the right part. To resolve the issue, such devices for the garage have been invented that allow you to organize small things and ensure a quick find desired part, For example:
- special portable boxes with compartments. Convenient option, allowing not only to store, but also to transfer the required parts if necessary. It should be noted that the cost of the boxes is relatively high, so the ideas below will help reduce costs;
- craftsmen sort small nuts and other parts into jars with twist-on lids, while the lids themselves are securely attached to hanging shelves. It remains only to screw the jar into the lid and the details will always be in sight, at hand.
If financial opportunities are available, they acquire compact storage systems for hardware, nuts and other parts, different in size, differing in fastening capabilities.
Tool storage
The working tool is divided into large-sized and small-sized, respectively, home-made devices for the garage will be different. In most cases, the owners prefer to store a cutting machine, puncher, and other large tools using “native” drawers. Therefore, for their convenient location along the wall, a rack is made from improvised materials, taking into account the total load on the shelves (for home-made structures, the weight should not exceed 150 kg).
Attention! The stores offer a wide variety of models of shelving, made of both wood and metal, withstanding loads of up to 500 kg or more. At a relatively low cost, it is convenient to purchase a ready-made rack in the garage under right size by attaching it to the wall.
For small tools such as wrenches, screwdrivers, pliers and others, organize the space depending on their number:
- sets are stored in purchased boxes, placed on a rack;
- for single items, they either equip cabinets in which each tool is fixed in the corresponding niche, or prepare a perforated surface (as in a store) mounted on the wall and determine a specific place for each of the tools.
Some craftsmen place their instrument using designs from plastic pipes in which holes of the appropriate diameter are made.
Homemade machines for garage work
For comfortable repair work, a place is provided for a workbench (to save space, it can be made folding). To begin with, they work out a drawing of the table, thinking over the presence of retractable shelves, then they make it from boards or metal sheets, equip it with a vice and a grinding machine.
In some cases, craftsmen cannot do without home-made machines and other devices made independently and improving the quality of the manufactured item.
Press from improvised tools
homemade press for garage One of the most popular do-it-yourself gadgets in the garage is the press. To create it, you will need a hydraulic jack, metal surface, which will serve as the base of the movable part of the press, springs and shaped pipes or a channel to create a frame. Further:
- create a frame by welding channels and reinforcing the structure with transverse stiffeners, transverse corners are also welded downwards for stability;
- the movable platform is attached to the upper frame with springs, a jack is installed.
The efforts of the press are regulated by a jack.
Homemade Holder for screwdriver Depending on the needs of the garage owner, other useful homemade machines, for example, drilling, made on the basis of a drill, fixed with clamps and moving along the rail with the help of a gear, or cutting, or turning.
In addition to the above devices, you should take care of the location of work clothes, provide for the presence of a fire extinguisher or sand (based on fire regulations security), consider ventilation and lighting systems.
Thus, having shown a little ingenuity and thriftiness, you can make do-it-yourself garage fixtures, thereby ensuring compact storage of things and freeing up enough space for minor car repairs and work related to servicing one or another home appliance.
vseogarage.ru
DIY garage accessories
For a true car enthusiast, a garage is a second home. And then the first. Therefore, everyone tries to take its arrangement and equipment seriously. The functionality of each square centimeter of area is also very important. This will allow you to work in a spacious room, and tools and spare parts will be stacked and located correctly and in perfect order. As for the arrangement in the domestic plan, we will not talk today, but today we will try to save on equipment.
What should be in the garage
In principle, there is no such device that could not be bought. True, not everyone has the opportunity to spend tidy sums on the purchase of Bosch equipment, by the way, it is useful to look through catalogs with Bosch equipment or Intertool, or Interskol. The young but frisky company Johnsway and Ombra, repainted from green to brown, have great experience and opportunities in this regard.
The catalogs contain a sea of excellent working equipment, fixtures and universal pullers, mandrels for all occasions and, of course, tools that are difficult to look at without a mean male tear. But the cost in the catalogs is unreasonably high, as for a private trader. Service stations, of course, in more favorable conditions, they earn money with equipment and God himself ordered them to have best tool. Otherwise, such a master is worthless.
Garage Craftsman Wish List
Still, it is worth making a rough list of what should be in the workshop, and from it already choose accessories for the garage that you can build yourself. Here's what everyone would like to see:
This should be an approximate set of additional equipment, not counting welding, a compressor, two or three angle grinders and two or three drills and screwdrivers different power.
Homemade fixtures
An elementary frame for a grinder can become a universal home-made machine. Applications - mass, made from anything, up to a solid wooden frame. it will be useful in cases where it is necessary to process a small part carefully and with two hands, without clamping the part in a vise. Of course this design has limitations, but as a small grinder or cutting machine, she will work for the top five.
We do not indicate the dimensions, the designs and sizes of the grinders are different. The photos show the essence of the device, and it is not difficult to assemble it. It is worth working on fixing the grinder to the frame - so that it is quickly and securely fixed and quickly removed. Such a device is especially valuable for angle grinders with adjustable speed.
As a base, we use a suitable size chipboard sheet, which is hinged, as in this design, or latched, you can use a screw mount.
DIY lathe
The drawing of a small lathe, which is presented, can be useful to those who occasionally have to deal with turning work, and it makes no sense to buy a desktop one. This project will certainly not satisfy those who need high precision and high spindle speeds, but for minimal turning work it will do. Instead of the spindle from the M10 bolt shown in the drawing, use a finished spindle or drill chuck.
Designed for processing wooden and plastic parts, the diameter of the part is up to 50 mm, and the length is up to 200, but can be revised if necessary. If we take it as a basis, then replacing wooden base on any rolled metal, we get a semblance of a desktop machine for metal turning.
Tool Storage
Various trifles are often folded in plastic buckets and boxes in the form of a kind of assortment. Therefore, finding the right small tool, drill or nut is quite problematic. For storing small things, jars of mustard, mayonnaise and other products with metal or plastic lid, which is firmly attached to the bank.
To organize easy access, you will have to sort through everything, separate the cutlets from the flies, the bolts by 10 from the nuts by 6 and sort everything into jars. Covers are screwed to shelves or any horizontal surface, and now it will not be difficult to find the necessary fasteners.
For horizontal storage of loose fasteners, magnetic containers can be used. Convenient thing. Fasteners will not crumble, always in sight, and containers can be arranged as space requires. The main thing is to fix a thin magnetic tape in the right place, and glue large metal washers to the bottom of the containers themselves.
More creative ideas that come to mind inventive craftsmen regarding the organization and storage of tools and fixtures, we have shown in the photo. Use your imagination and reinvent the wheel. And your garage will be the perfect place for a comfortable repair of your favorite car.
See also electrical heat guns for garage, lifting Garage Doors do it yourself - drawings
ladamaster.com
How to make homemade garage fixtures: 2 workshops
Home-made devices can be made from improvised materials Car repair is a complex and responsible task that requires practical knowledge and the availability of special equipment. This equipment includes a whole list of tools that are not cheap. That is why even those motorists who know how to fix their four-wheeled friend give it to a car service for repairs. If you decide to get your own garage accessories, but do not want to spend a lot of money on such purchases, you can do some of the list of necessary things with your own hands.
So that your garage can become a place for car repairs. It needs to be equipped with more various tools. Some of them will have to be purchased in specialized stores, but others can be made with your own hands.
Having everything necessary fixtures and garage machines, you can open your own small car service. Such a garage business will bring you good income.
Garage accessories are easy to do with your own hands. In fact, there are many master classes for the manufacture of such homemade products. Let's see which tools are made on their own most often.
What homemade tool is suitable for a garage car service:
- First of all, it is a car lift. Not a single car repair shop can do without this equipment. The price of such finished device high, but if you wish, you can do it yourself. Today we will talk about the technique of creating such accessories.
- Also needed for garage workshop Hydraulic Press. Such a device helps to compress unnecessary details. You will be pleased to know that you can make it yourself with minimal investment.
- Useful accessories such as a spotter comb are also important. Such equipment is easy to manufacture, but in finished form it is very expensive.
For a car service with your own hands, you can do metal shelves that can be moved
These are not all the fixtures that you can make for your garage with your own hands. However, it is precisely the described useful homemade products that we will make today in our master classes.
Garage Accessories: Room Improvement
Before we start describing how to make garage accessories, we suggest putting things in order in the auto repair shop itself. After all, each tool should have its own place, so it will be easier for you to work.
Homemade tools very practical, but do not always look aesthetically pleasing, so it is better to remove them from prying eyes. But, for example, such a device as a drilling machine and jacks can be put in a prominent place.
You can't make a drilling machine with your own hands. In this case, the main thing is to choose the right tool correctly.
Now more about the organization of the workspace. If you decide to make a car repair shop in the garage, and make money from it, then you will have to prepare the space accordingly.
How to organize tool storage space in the garage:
- First of all, we advise you to make some wooden boxes. In some of them, you can make a shelf with holes for screwdrivers.
- It is also necessary to make mobile racks for heavy tools. This will allow you to change the location of these shelves, putting them in a place convenient for you.
- So that in the process of work, you do not have to constantly run after the tool, you can use a special belt that will fit the essentials. Such devices can be bought or made independently.
These homemade tool storage spaces will help you organize your garage space. Thanks to this, everything you need will always be at hand. This will save you a lot of time.
Do-it-yourself garage fixtures: making a lift
A lift is needed for every auto repair shop. This device helps to keep the machine in an elevated position for the time you need. Due to this, access to all hard-to-reach areas is opened.
Of course, you can buy a lift in specialized stores. However, the price for similar products unpleasantly surprise you.
The lift for the car repair shop can be made by hand. You don't even need to be a welder to do this. Therefore, you can easily cope with such work.
In order to assemble the lift, you will need:
- Worm gearbox, the load capacity of which will start from 300 kg;
- Steel corners with dimensions of 7.5X7.5X0.8 cm - 2-3 pieces;
- Some number of bolts;
- You will also need a steel plate, at least 1 cm thick;
- Two iron chains, at least 2 cm thick;
- Steel cable with half a centimeter section;
- Metal hook;
- Two dowels in the form of an asterisk.
From such materials it is easy to make a lift without spending a lot of effort. The main thing is to perform all actions accurately and efficiently.
To make a good garage lift, you need to use high-quality metal
How to make a car lift:
- Steel corners need to be attached to opposite walls. In this case, they should be located on the same level.
- A plate is attached to the corners. This is done with eight bolts. Thanks to in a similar way connections, the plate can be moved relative to the engine.
- A worm gear can be installed on the plate.
- One of the keys, the one with a larger diameter, must be fixed on the gearbox drive shaft.
- One hole must be made on the plate. A chain is passed through it and closes into a ring.
- On the output shaft of the gearbox, you need to install a smaller key.
- A couple of holes need to be drilled in the lift plate.
- Pass the second chain through the drilled holes. One of its ends is thrown over a smaller key, and a hook is hung on the other.
This completes the manufacture of the lift. You just need to test it in action. Spending a little time on such work, you can save an impressive amount.
How to use a garage tool such as a lift
Using this lift is quite simple. However, in order not to damage anything, you must follow a few rules.
How to use a homemade lift:
- Unscrew the bolts that connect the machine's engine to its frame;
- Loops of a steel cable carefully lead under the engine. Throw the ends of the rope onto the hook.
- Move the chain carefully. Gradually, the cables will stretch, which will set the engine in motion. Perform all actions slowly and smoothly.
- When the engine is raised to the required height, the lift can be stopped. The gearbox will hold the structure.
- In the place where the car flocked, it is necessary to put a table that can withstand the weight of the engine.
Please read the instructions before using the lift.
Using a lift will greatly facilitate your work in the workshop. Therefore, it is worth spending time and making it yourself.
Garage machines: we make a hydraulic press
The hydraulic press is often used in auto repair shops. It is necessary for installation and repair work. Such a device works on the principle of a jack.
Such a device can be very expensive. Some models can cost several tens or even hundreds of thousands. It is because of the cost of a factory product that a hydraulic press is often made by hand.
There are several positive aspects of making a hydraulic press with your own hands. Let's get to know them in more detail.
Why making a DIY hydraulic press is a good idea:
- A homemade hydraulic press can be made specifically for the work you need. This applies to both its size and its performance.
- You can assemble such a jack from improvised materials. Therefore, the price of such an assembly will be low.
- You can be sure of the quality of the assembled product. If necessary, it can be repaired.
The hydraulic press is made of a jack, channels, two metal corners, bolts and springs.
From time to time the hydraulic press should be inspected for worn or damaged parts.
The assembly of the structure is carried out according to the scheme. All elements are fixed by welding and bolts. It is very important to position the jack in correct position.
Homemade garage fixtures: making a comb
We want to tell you about the manufacture of the comb. This spotter tool can be used to smooth out dents in doors. It can be purchased in specialized stores, or do it yourself.
How to make a comb for a spotter with your own hands:
- Take a metal strip and make three holes in it. The first should be at a distance of 1.5 cm from the edge, the second at a distance of 2.5 cm, and the third - 3.
- Now between the two holes (which are closer to the edge), you need to saw through the jumper with a file. After the completion of this work, instead of two round holes it should be one oval.
- From the third hole we make a cut to the edge. You should get a notch for the washer.
- Now we cut out a kind of semicircle above the hole made. As a result, you should get a hook with an oval hole and a rounded notch. Make four more such details.
- Take a tube with a diameter of 1.5 cm. At a distance of 2 cm, drill a hole with a diameter of 8 mm. After two cm, cut off the tube.
- On the other tube, make a semicircular recess, our workpiece should ideally fit into it.
- We weld the tube with a notch to the workpiece so that the hole is on top. A nut must be welded to this hole.
- We take another tube, weld a washer on one side, and put our hooks and workpiece on the other. The comb is ready.
Such a comb is no worse than a purchased one. It does its job well and is inexpensive.
Do-it-yourself garage accessories (video)
Garage accessories are not difficult to make with your own hands. To do this, you need to apply only diligence and ingenuity. Dare!
Examples of do-it-yourself garage fixtures (photo)
Attention, only TODAY!
oteplicah.ru
Homemade machines and accessories for the garage. Read the article!
By making home-made machines and accessories for the garage with your own hands, you significantly save your own and family budget. Homemade shelving, various furniture, workbenches and even some tools - all this can be done independently.
Self-made garage machines are needed to solve the following tasks:
- Simplifies the process of processing metal products,
- There are new opportunities for grinding and processing wood,
- A machine in the garage allows you to save on the purchase of an electric saw and other woodworking tools.
As a rule, any of the racks or power tools is quite expensive in the construction market. That is why the owners of garage boxes come to the idea of creating some fixtures on their own. The most popular options for homemade homemade tools are:
- Manual or semi-automatic carpenter's workbench for metal;
- Wooden or metal workbench;
- Drilling machine for garage;
- Homemade press design;
- Various variations of shelves, racks and organizers for tools;
- Hoist or winch for lifting heavy parts and things.
How to make drilling machines in the garage with your own hands?
Drilling machine for garage Thereby makeshift device You will be able to perfectly cope with the manufacture of any number and diameter of holes for metal and wood objects right in the garage workshop. The simplest and at the same time reliable option for manufacturing a machine is to use a drill with a bed. To make the device you will need:
- Metal frame in the form of a base;
- A small mechanism for imparting rotation to the drill;
- Low vertical stand for attaching a drill.
In the form of a rack, it is best to use trimmings from chipboard or unedged boards. Due to the low weight of the drill, there is no need to use metal profile. At the same time, it is better to use a cast-iron base for the bed - it will allow you to avoid any vibrations during the operation of the equipment. In the video you can see how to make homemade machines for the garage with your own hands.
How to make a carpentry vise in the garage?
To create a vise with your own hands, you will need correct sequence connect the following elements:
- Several supports, each of which will be a sponge for clamping the product,
- One metal clamping jaw,
- A set of steel guides that are used for smooth movement of the sponge,
- Design lead screw,
- An element called a crank that sets the screw in motion.
The first support from the pipe will act as a kind of body. It will be necessary to solder other supports to it from below and install a steel flange. Especially for the movement of the running nut, we drill a hole and, on the contrary, weld the sponge. For the operation of the equipment, it remains only to install a stud in the holes, fix it with nuts and insert a movable tube next to it. As a result, making a vise for a garage with your own hands is not particularly difficult.
Forge in the garage with your own hands
If you decide to make a forge in the garage, then you don’t need to buy expensive components for this - everything can be made from improvised materials. The old gas stove will serve as the main for the hearth. We install it in the chosen place, having previously overlaid the base and the construction box with refractory bricks (chamotte) and smeared all the cracks with clay.
The next step is to make a grate. For a mini forge in the garage with your own hands, you can weld it from an old piece of steel. It is advisable to choose a metal of at least 10-15 mm. Further, furs are made for pressurization, the block of which can be quickly put together from thin-walled plywood and several pieces of board.
The last step is to prepare the fuel. Coal can be bought at the store or made by yourself in a trench using a large duralumin pan. To do this, load the chopped firewood, close it tightly with a lid and smear the cracks with the edges with a clay mixture. In the trench, you make a firebox and heat the coal “until ready”. As a result, you get a full-fledged forge in the garage, made by yourself.
Now, from improvised materials and tools, you can easily make things useful for the garage space on your own. If you have any questions - write them in the comments!
It's nice to see when a person has done all and other household items with my own hands. To simplify the process of cutting metal or cutting wood elements, they build home-made machines and fixtures for the home workshop. This solution saves not only time for the manufacture of products, but also money for the purchase of finished products. A few practical and interesting options are discussed below.
DIY pipe bending machine
Read in the article
How to use homemade machines and fixtures for the home workshop
The use of home-made machines and devices for the home workshop is aimed at solving several problems:
- Simplification of the metal processing process. In the course of creating household items, a metal carver or a press is often required.
- Improvement in wood processing. Even to build small barn or make a wooden one, others are also needed.
Buying a ready-made tool is quite expensive, so the use of home-made machines and accessories for the garage is becoming more and more relevant every day. Among the most common options home instrument allocate:
- carpentry workbench;
- device for quick sharpening of knives;
- device for sharpening metal drills;
- drilling machines;
- press;
- cutting disc machines.
Here are a few photos of do-it-yourself tools and fixtures from "homemade" ones:
1 of 4
Practical DIY tool shelves
Before creating devices, and with your own hands, determine the storage location for all devices, so that later you do not have to look throughout the workshop or where everything lies. It is not difficult to make a shelf for tools with your own hands, the main thing is to decide on its dimensions and material of manufacture.
The easiest way to make shelves is to assemble them from wood. Do not forget about the need to cover the finished structure with a protective varnish or to prevent rotting and swelling of the wood.
You can create a combined version of a metal support and wooden shelves. Here detailed instructions to create such a homemade model:
| Image | Sequencing |
 | Assemble the frame. To do this, prepare two side frames, consisting of 4 corners. Connect elements with . Then, tighten 2 frames together using 4 corners. |
 | When the frame is fully assembled, proceed to the manufacture of shelves. They can be made from wood or metal, as well as from other improvised dense materials. It is enough to cut the canvases of a suitable size and fix them on a metal base. |
 | If desired, you can make the rack movable by attaching four small wheels. Or firmly install it in the allotted place in the garage. |
You can find others interesting projects and drawings for the manufacture of shelves for tools. Watch a video on the topic:
Also do it yourself useful gadgets For household:
1 of 4
We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples
Among the common do-it-yourself devices, a workbench is distinguished. Durable and dimensional, allowing you to securely fix the workpiece, it is useful for high-quality cutting of wood and creating various elements from it.
The device package includes:
- Working surface. For it, a solid one is used to increase the life of the device. The thickness must be at least 6 cm.
- Supports. Collected from wooden beams or metal plates. the main task- ensure the stability of the entire mechanism.
- Vice for fixing the product. If the table is long, you can install two vices at once.
- Tool box. A useful recess or pull-out design that provides quick access to the small parts you need.
To independently assemble a carpentry workbench for your workshop, you should choose a drawing, purchase material for work.
Do-it-yourself carpentry workbench drawings
Before buying materials to build your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself, it is advisable to note the dimensions of the materials used and their quantity.
For example, a finished drawing of a folding workbench with your own hands may look like this:
Whatever model you choose to create, consider several features of the desktop that provide the convenience of cutting wood:
- the height and length of the hands of the master: the height and width of the countertop depend on these parameters;
- which hand is working: place the vise on the right or left;
- what blanks will be made: selection of the table shape;
- how much space in the room you allocate for a workbench.
Given all these parameters, it will be easier for you to decide on the drawings of the carpentry workbench and the dimensions of the machine. Here are a few interesting examples:
Instructions for assembling a wooden workbench with your own hands
You can buy a wooden workbench in a store or through online catalogs, but it's cheaper to make it yourself. Let's take as a basis a simple option with standard sizes countertops: length - 150-200 cm, width 70-120 cm.
Manufacturing work will include several stages:
| Image | What need to do |
 | Make the top cover from thick ones to make a shield with a width of 70 to 200 cm. Fasten the elements onto long nails, and you need to drive them in from the outside, and carefully bend them from the inside. The working surface of the workbench is made only of wood or. |
 | Sheathe the lid along the lower perimeter with a 5 by 5 cm timber. This will make it more convenient to mount the vertical supports. The location of the supports depends on the size of the countertop. It is better to make them from a thick rectangular bar at least 120 by 120 mm. |
 | The carpenter's workbench must be installed correctly. Be sure to fasten it firmly. If it will be mounted on the street under a canopy, then dig holes for the supports. Indoors, use other methods of fastening. |
When the structure is assembled, place a vise on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:
Making a carpenter's vise for a workbench with your own hands
Professional "homemade" assemble not only tables for work, but also a vise with their own hands according to the drawings. Any design of such a clamp will include several elements:
- Supports where each has a sponge for clamping.
- Moving clamping jaw.
- Metal guides. A sponge moves over them.
- Lead screw, for moving elements.
- collar. Required to rotate the screw.
In the manufacture of homemade vise with your own hands, you can use various improvised materials. For example, there is a design option from a profile pipe. To do this, prepare several pieces of pipe different sizes, steel stud with coarse thread and double nuts.
Instructions for creating a verstal vice from a profile pipe:
| Image | What need to do |
 | The largest pipe acts as a body. Supports are soldered to it from below. A 3-4 mm steel flange is put on the back side. A hole for the running nut is drilled in the center, and opposite the front support there is a back sponge. |
 | On the inner moving part, the front steel flange. A stud is mounted in it, with lock nuts fixed to it. Thrust washers are put on both sides of the flange. The last element is a movable tube attached to the front sponge. |
And also watch the video "do-it-yourself vise at home":
Do-it-yourself metal workbench drawings
A metal workbench does not differ much from a carpenter's workbench. Based on hard metal, not wooden frame. A vise is attached to it, and the entire workbench is designed to withstand the force of a blow from a sledgehammer.
Do-it-yourself metal workbenches can have one, two or three cabinets, and also not have shelves and drawers for small parts. In terms of strength for working in the garage, you can make an ordinary table of metal up to 5 mm thick and reinforced structure where sheets from 10 to 30 mm are applicable.
Here are some useful drawings for making metal workbench for your workshop:
How to make a do-it-yourself knife sharpener: drawings and photo examples
No home is complete without a knife in the kitchen. It is rather difficult to make the correct one without special devices: it is necessary to observe desired angle and achieve the perfect sharpness of the blade.
For each knife, a certain sharpening angle must be observed:
- Razor and scalpel require an angle of 10-15⁰.
- Knife for cutting bakery products - 15-20⁰.
- Classic multifunctional knives - 25-30⁰.
- For hunting and camping, they take a device with a blade angle from 25 to 30⁰.
- If you want to cut hard materials, then sharpen at an angle of 30-40⁰.
To ensure the desired angle, it is worth buying or making a sharpening device. For example, you can assemble a sharpener with your own hands.
A comment
Specialist in the selection of tools "VseInstrumenty.ru"
Ask a Question"If you do not use sharpening every day, then 1000 rpm is enough for a quality result and long term operation of the device.
"To assemble such a machine, a motor from a “washer” with a power of 200 watts is useful. Completely to create a grindstone from the engine from the progress of work to create such a simple fixture will be as follows:
- Sand the wood blocks sandpaper by removing the burrs. Make a markup depending on the desired angle.
- Attach a stone to the drawn line to sharpen the blade. To do this, attach it to the bar and mark its width. Then, on the markings, make cuts, up to 1.5 cm deep.
- In the resulting recesses, fix the abrasive bars so that the grooves match. Then, install the sharpening stone by screwing it onto the bolts.
There are many ways to make a homemade knife sharpener. Choose the right one and try to create a convenient and useful tool for the home.
How to make a do-it-yourself tool for sharpening a drill for metal
They independently make not only a sharpener for blades, but also a machine for sharpening drills for metal. Here are some drawings to help you get started:
Ready-made home machine The simplest and most common version of such equipment for the garage is a converted drill. For work you will need: - bed for the base;
- rotation mechanism;
- vertical stand.
For a rack, boards are usually used. The mass of the drill is small, so there is no need to use metal. In this case, the frame must be made massive in order to reduce vibration during the operation of the device.
To correctly connect the bed and the vertical stand, as well as assemble all the equipment into one whole machine, pay attention to the video instruction:
Do-it-yourself drawings with dimensions for a drilling machine
To properly make any machine or practical device for private use, you first need to make a drawing with dimensions. Only then proceed to the preparation of materials and assembly of the device.
Here are some examples of do-it-yourself drilling machine drawings from a drill:
And you can also make homemade vise for drilling machine. Below is a video instruction for assembling such a device:
Article
A variety of accessories for a private garage, designed and manufactured in-house, allow for better and more efficient car maintenance. Their creation requires minimal financial costs. Wherein homemade equipment in most cases, in terms of its capabilities, it is in no way inferior to expensive factory counterparts.
Stand for an electric drill - simplify the drilling process
In a private garage, over time, more and more various tools and equipment used for maintenance appear. vehicle. The owner should ensure their convenient and rational storage in such a way that the most necessary devices are always at hand, and rarely used ones are hidden away. To solve this problem, you need to draw an elementary sketch and create shelves or on it. Ready options There are many such structures on the Internet. And it’s not difficult to come up with a shelving system yourself.
More problems arise when any rare garage DIY is required. For example, many car owners use when servicing a car and performing various works around the house with an electric drill. Often with its help you need to do it flawlessly even holes with axes strictly perpendicular to the plane of the workpiece. Anyone who has tried to achieve such a result knows that it is not at all easy. As a rule, holes are obtained with distortions. A stand for a drill allows you to solve a similar problem. To build it with your own hands, you need to stock up:
- a bar or a calibrated tube;
- a platform from a milling cutter (manual), which has not been used for its intended purpose for a long time due to its deterioration;
- sheets of plywood.
It is allowed to use another suitable platform as a base for the rack. The main thing is that it be even and have areas where you can install new long guides. The function of the latter in our case will be performed, as you already understood, by metal bars or calibrated tubes. The process of building a rack is really simple. Let's describe it.
First, we cut out a box from a sheet of plywood. It must be done clearly according to the geometric parameters of the available drill. Then it is necessary to fix our power tool for drilling holes in the box prepared for it as securely as possible. Fixing is best done using special wing nuts. After that, we make two holes in the box and pass tubes (rods) through them - guides. We mount a handle on top of them. With its help, we will move the drill to drill holes vertically.
Advice. If you want to control the depth of drilling, it is advisable to additionally equip the structure with a quick-clamping latch. It will play the role of a drill limiter. All the works described by a more or less experienced home master won't cause any problems. And in the end, we get easy-to-use and very useful home-made equipment.
Mini knife sharpening machine - reliable and compact
Now let's try to make a device that will allow you to sharpen kitchen and any other knives. We act like this:
- 1. We take an unnecessary sheet of metal (in any garage, it is always lying somewhere in the corner and waiting in the wings).
- 2. We fix a threaded bolt in its lower part, and weld a small corner on top of the metal plate.
- 3. We put a nut on the bolt thread. It performs the function of a hinge for the lateral movement of our device. With it, you can change the angle of sharpening knives.
- 4. We weld another one to the described nut. We got a ready-made hole for the stem in the bolt. It is easy to make from thin wire.
The clamp in the machine is the top of the sheet. We make two holes in it. We attach a clamp to the bed. Then we cut another hole. It must be through (common for the plate and the clamp). Next, we make a thread in the bed, taking into account the length of the bars for turning. They are optimally made from artificial diamonds. More wear-resistant and at the same time quite inexpensive product in nature does not exist. And we will make clamps for bars in a couple of minutes from a piece of ebonite or plexiglass.
It remains only to drill an additional hole on the plate, placing it away from the knife, and cut the thread for the bolt with which the tightening will be performed. Compact and quality tool ready for sharpening! We put it on a shelf in the garage and use it as needed. Machines made according to the described scheme can be taken with you even on a hike. Such garage sharpeners weigh a little, take up a minimum of space.
Crane-beam for the garage - we will facilitate the repair of the vehicle!
Maintenance and simple car repairs in a home garage are greatly simplified if there is a crane in the room. Look at the photo below. It shows what a convenient and useful garage structure can be constructed without much effort.
We will make a transverse bar from a pipe with a cross section of 10 cm, supports for it - from pipes of 11 cm. Important! Racks homemade design it is recommended to make from square profile pipes with dimensions of 10x10 cm. They will provide the fixture with good stability. We attach the bar to the supports with M16 bolts (you can also take other fasteners), we fix the bevels and the base using a 10x10 cm corner.
In the nearest construction store, we purchase a lifting cable. We take the rollers for it from the drive mechanism of the elevator doors. Notice! The rollers must be well fixed. This operation is best performed using a narrow (5 cm) metal strip. The lifting of objects on the crane-beam will be provided by a worm manual winch. And don't forget to attach another set of rollers to the uprights. They will allow you to easily move the beam crane around the garage.
Do-it-yourself compressor - homemade for advanced drivers
Workbenches, hanging shelves and other useful crafts for and storage of equipment can be built by any motorist. It is more difficult to make machines and special equipment with your own hands. But with the right approach to business, it is really possible to cope with such tasks. Let's assemble a compressor that can be used to purge the components and mechanisms of a vehicle, paint a car, and control tire pressure.
We will need a 10-liter air receiver (a device with a slightly larger or smaller volume is also suitable), a refrigeration unit (old, not used for a long time), and also:
- adapters;
- inexpensive filter regulator (feel free to buy the cheapest one);
- oxygen manometer for the receiver;
- fastening clamps;
- hose (approximately 200 cm), designed for 20 bar pressure.
The compressor assembly process is elementary. The receiver has outputs at the bottom, in the middle and at the top. The lower one is necessary for draining oil and condensate, the middle one is for installing a pressure gauge. A stream of compressed air is supplied through the upper consumer. We connect all the required elements to the outputs of the device, fix them with clamps. We connect the filter regulator to the receiver panel. Next to it there will be a button to start the unit. The maximum pressure of the regulator on a homemade device should not exceed eight atmospheres, the minimum - two.
It is advisable to additionally equip the compressor with an emergency valve. This inexpensive element will guarantee the completely safe operation of a homemade device.
The made compressor will be placed near the wall on a rack or shelf. It will not interfere when moving around the garage, being at the same time always at hand by a home craftsman. Advice. The old compressor must be well cleaned of rust before use. And then buy aerosol can with paint and paint the unit.
Pulley for adjusting the speed of homemade machines and other crafts
We will briefly describe other popular tricks that are easily made from old tools and unnecessary things. Let's make, for example, a pulley for any machine tool available in the garage. The material for its assembly can be textolite, metal, plywood sheets. The last option is the easiest:
- 1. We cut out two larger circles and one smaller one in a plywood blank. The holes made in diameter must correspond to the cross section of the shaft installed on the machine.
- 2. We put all the circles on the screw, use the nut to tighten them firmly. Instead of this fastener, a good glue is allowed. It will securely fix all the elements in a single design.
- 3. Additionally, we tighten the details of the craft with screws.
- 4. With a file or sandpaper, we process a home-made pulley, apply a couple of layers of drying oil to it.
- 5. After drying, we put the made device on the cartridge of any mini-machine (let's say an electric drill). And we use the tool for our own pleasure, because now we can choose the speed of its rotation and control the load on the electric motor of the unit.
If necessary, actually make a toothed pulley. To do this, it is enough to cut narrow grooves (tubules) in a small circle. This part of the operation must be completed before assembling the pulley.
if you have electric jigsaw, which is not used due to a broken file holder, you do not need to send it to a landfill. There are little tricks to give the instrument a second life. On its platform it is really possible to assemble a simple desktop jigsaw. We take a square of metal, solder a bolt into it. We get a new file holder! Solder it to the old holder.
Then we make a stationary desktop. We take plywood sheet, cut it to the size of the jigsaw. We attach a wood rack to the back plane of the working surface (we use hard varieties), we install furniture legs on the front. Next, we mount working structure to a suitable base plate. Use the restored and improved jigsaw for health.
