Do you want to add a zest to the interior and create a decoration for it that surpasses any furniture or home gallery in beauty and prestige? For you there unusual solution- Waterfalls on glass. In this article, together we will reveal the secrets of an unusual room accessory, how to buy and install it correctly, and also discuss whether it is possible to make a waterfall on your own.
How does a home waterfall fountain work?
The system for creating such an exquisite decor consists of several interconnected devices:
- electric pump;
- frame made of plastic or metal with anti-corrosion properties;
- the base of the cascade is made of safety glass or a mirror;
- the base of the water intake;
- decorative stones;
- backlight.
Inside, in the on state, distillate constantly circulates, which does not form limescale, which does not acquire a smell over time and does not rot.
Electricity consumption is relatively low - 130-150 W, with regular use it will cost you no more than, say, a lamp. The continuous period of operation (without shutdown) of the structure is impressive: it can operate non-stop for 18-20 hours a day if necessary. Optimal for apartment options there will be a period of 3-4 hours a day, which will postpone the need for service in the future.
Which home waterfall to buy?
Each type has its own advantages, and also differs in design and compatibility with the interior. It is better to think over which of the types will be better and more interesting for you in advance, before contacting the manufacturer.
The waterfall on glass is a truly bewitching sight. To enhance the effect in the dark, turn on the backlight different shades. The design is simple - water continuously flows down a glass wide panel, a water intake is arranged below, where it goes, returning to the system. Water circulates through the fountain and creates a beautiful illusion of a cascade from an endless source. The noise of falling water is minimal, as the jets roll along smooth surface glass, without forming a free fall and, accordingly, noise.
A waterfall along the strings is a completely different embodiment of the same idea. A water supply system is installed in it at a height of 180-200 cm above the water intake. The fall occurs along a stretched string or plastic tube, which gives the impression that the water is falling in a thin curtain.
The advantage of such a waterfall is the maximum visual effect of falling water. Cons - noise and splashes if installed incorrectly are still noticeable, although you may wish yourself such a waterfall just for the sake of the murmur of water, and splashes can be minimized if the installation is done by a professional.
The bubble panel is a fundamentally different design for a home waterfall. First of all, this is a closed waterfall, hermetically limited by high-quality glass or, in some cases, triplex, which cannot be broken. Further, the movement of water is created not by a fall, but by aeration of the water mass with large beautiful bubbles. When you put on a home water show with a bubble bar, you can control the intensity of the bubbles and the strength of the flow. With backlight - the beauty is indescribable!
The bubble column is similar to the previous version, but differs in shape. It is a round column with a diameter of 15-25 cm, with a bubble presentation inside. Such columns are installed in different ways - singly or in a group of 3, rarely 5 pieces. Multiple compositions are rarely used in the interior of apartments, because due to some massiveness they are more suitable for spacious halls, entertainment centers or exhibition halls.
How to install a home waterfall?
Of course, you guessed that such technological structures should be installed by a professional. A do-it-yourself homemade waterfall not only loses in appearance, but also certainly does not match specifications and will bring more disappointment than joy.
About what important details need to remember before getting down to business? Firstly, the water structure itself has a considerable weight, and, like any circulating system, it needs a reliable and stable support. The installation wizard will begin by figuring out how your floor is located in your room.
Any unevenness is unacceptable, and loose boards, old parquet, bumpy linoleum or laminate laid on voids are a potential problem for the entire structure. That is why, before installation, you need to repair the floors or at least make a screed in the place where your water decor will stand.
Secondly, the beauty of the water cascade depends on the correct distribution of stress and jet tension. For example, a waterfall on glass will ugly fold into thin jets if the top of the slide was installed with flaws.
Only a professional with experience can do everything right, the best self-taught home craftsman will not be able to align the cascade perfectly.
Thirdly, materials and their assembly require special tools. The assembly consists almost entirely in soldering polypropylene, and not everyone has the equipment and experience for this type of work. Mistakes will cost not only defects in work, but damage to materials, the price of which is quite high. Therefore, we advise you to contact only specialists who can easily install the structure and provide further service.
Are there homemade waterfalls?
In fact, there are, but you shouldn’t flatter yourself about this, and here’s why.
Waterfalls on glass
The most beautiful and popular product is a waterfall on glass, very often it is called a weeping panel. Such a waterfall looks spectacular and is a wonderful element of the interior design.
A waterfall on glass can be made as a free-standing structure, which is used to delimit space. Decorative waterfall on glass is the most different sizes- from very small to huge impressive structures. Literally 10 years ago, it was impossible to buy glass waterfalls in Russia, they were ordered from Europe, but now you have the opportunity to order a product according to an individual project!
String-drip waterfalls
String-drop waterfalls form a wall from which water flows smoothly and beautifully. The speed of water movement can be different, the wall can resemble a real Niagara Falls, or it can look like a softly falling rain. String-drip waterfalls will help you create an amazing environment, and with the help of lighting you will create three-dimensional picture which will be remembered by everyone. Most often, a string-drop waterfall is used as a partition between rooms or simply for a decorative effect.
|
|
|
Waterfalls in the mirror
A real embodiment of style is a waterfall on a mirror. With the help of such products you can easily make any boring environment attractive and unusual. Waterfalls on glass are installed in business centers, hotels, apartments. The use of lighting allows you to fit the waterfall into any interior.
artificial stone waterfalls
Decorative waterfalls on glass in the interior
A decorative waterfall in the office immediately catches the eye. Your visitors, customers, partners immediately get the feeling that they are with a reputable and representative company that you can definitely trust. In addition, a home waterfall performs not only a decorative function. The waterfall humidifies the air, this is especially important in winter, when full power many heaters are in operation.
The waterfall in the apartment creates a cozy atmosphere, harmony. Helps reduce emotional stress, restores strength after a hard day's work. An artificial waterfall gives the apartment dynamics. With the help of well-chosen lighting, you can visually enlarge the space and profitably beat the situation.
Returning from work or from a long trip home, you always want to relax and unwind in a cozy, comfortable environment.
Not only houseplants and aquariums, which must be constantly looked after, make the interior of the room softer, relieve internal emotional stress, soothe and caress the look.
You can let the beauty and the bewitching whisper of nature into your apartment with the help of glass waterfalls. Running water, decorative lighting, waterfall design on glass, mirror or stone bring zest to the interior of rooms, have a beneficial effect on the condition nervous system humidify indoor air.
How it works?
The installation, in which water flows down the glass, does not require an additional source of water or connection to the central water supply. The scheme of liquid movement is as follows: from the lower tank, the water is pumped to the upper storage tank, from where it falls evenly along the smooth surface of the plexiglass and again finds itself at the bottom. Pumps ensure quiet and trouble-free operation of the waterfall the best manufacturers capable of lifting water to a height of about 2 meters. The pump and lower water tank are not visible, they are hidden behind decorative panels.
Distilled water circulates in the device. Such water does not bloom, does not emit a smell, does not form on surfaces lime deposits. Care technical design incredibly simple. It is enough to occasionally wipe the outer surfaces with a damp cloth. To place a waterfall on glass, a lot of space is not required, and visually the area of \u200b\u200bthe room or hall increases with this decor.
The manufacturer's warranty for water-on-glass equipment is one year.
Running water in the interior
Placing a waterfall on glass in an apartment or country house has no restrictions. In rooms where laminate, parquet, wallpaper and a drop of water are used for decoration, they will not fall on the floor or walls. The structure is completely sealed. Correct installation eliminates splashing of water during operation of the device. At the request of the customer, it is possible to manufacture miniature designs and large waterfalls. Designed and built according to individual requirements, the product always perfectly takes into account the characteristics of the living space.
In an apartment, a waterfall can be built into a niche or wall, with the help of falling water, divide the room into zones, hide part of the room behind a wall of water. Decorative design details are made of high quality materials, their color and texture are carefully selected and harmoniously complement the interior.
The fact of the measurement does not oblige you to conclude an agreement! The decision to order an aqua structure is only your decision, and we can only help you make it.
Our manager-designer will accurately measure the openings, consult in detail on aqua products, help you choose the right configuration, calculate the cost of the order, and, with your consent, draw up a contract at your home. We believe that our clients deserve professional treatment!
For residents of other cities in Russia and Kazakhstan - the cost of measurements is included in the cost of installing waterfalls and bubble systems. It is carried out only with a signed contract and prepayment.
We ship bubble systems and waterfalls to any city in Russia and Kazakhstan.
Delivery of aqua products is carried out by the transport company Zheldorekspeditsiya in rigid packaging. The cost of delivery depends on the weight of the product and on average does not exceed 2000 rubles. Delivery around the city to the terminal of the transport company is free.
It is necessary to determine the type of product by, its variety, dimensions(diameter or length, width, height), inform the requirements for decorative finishing of body elements, built-in lighting, whether it is necessary to organize the delivery and installation of equipment.
Can. We can deliver and install any order on a turnkey basis at your facility, regardless of its remoteness within Russian Federation and countries of the Customs Union. The cost of installation depends on the location of the facility and the complexity of the equipment.
In this case, you can order a waterfall without decorative finishes hull and implement it directly at the facility from the available materials. We can also decorate the waterfall in production from materials purchased according to your nomenclature or materials provided by you.
First of all, you need to take care of the quality of the water in the fountain or waterfall. Perform regular water changes, add necessary chemicals, and monitor equipment. That is, as accurately and accurately as possible, follow all the instructions specified in the operating instructions.
Each of our waterfalls or fountains is supplied with a detailed general instruction and instructions for the installed equipment.
In the event that you still have problems with the operation of the waterfall, our specialists will be able to provide qualified assistance by phone or on the spot.
The waterfall (fountain), materials and equipment used in its construction are given a general guarantee of 12 months. During this period, the buyer can contact us about the warranty work. The list of works that are not related to the warranty is indicated in the instruction manual. For certain types of equipment, the manufacturer provides a 2-year warranty, so even after the end of the general warranty period, you can contact us for repair or replacement of the relevant equipment.
Can. When choosing fountain nozzles, the type of water pattern, the shape of the reservoir and the calculation of the filtration system, you must first take into account the presence of fish, its number and size. In the event that a fountain or decorative waterfall located on the street, you need to think about where the fish will spend the winter.
We use the quietest pumps found in fountains and waterfalls. Their work is completely drowned out by the noise of falling water in the waterfall (even if it is the quietest waterfall “on glass”). It must be noted that this applies only to high-quality pumps, so it is better not to save on the quality of equipment.
The noise level from the water depends on the type of fountain or waterfall and the selected water pattern.
The waterfall is a source of high humidity, and when turned on, it also makes noise (even the quietest compositions). Therefore, waterfalls are usually located in walk-through rooms - hallways, corridors, halls, or in winter gardens. If you install a waterfall in the living room, next to the home theater or in the bedroom, you will very rarely turn it on, although a professionally executed waterfall should be pleasing to the eye even when it is turned off.
The covering of the floor, walls and ceiling in the area of the waterfall should be, if possible, moisture resistant. You should not place a waterfall next to a dressing room, library, i.e. premises where high humidity undesirable.
The main factors that negatively affect the operation of the fountain equipment and appearance This:
– high water hardness,
- mechanical impurities.
Due to the high hardness of water, calcium and magnesium salts are deposited on the surfaces of the waterfall in contact with water (especially along the interface between water and dry zones), equipment (rotors centrifugal pumps), in the channels of various nozzles, and so on. This ultimately spoils the appearance of the materials from which the waterfall or fountain is made, disables equipment and fountain nozzles.
Water hardness can be combated with special chemicals or use prepared water, which will slow down the process of salt deposition.
To remove dissolved iron (which over time is deposited on the surfaces of the waterfall in the form of a brown precipitate or plaque), special filters must be used.
To protect against mechanical impurities, the filter can be installed separately or directly on the pump.
To create waterfalls “on glass”, triplex is used (laminated or laminated silicate glass), strained glass, less often acrylic glass(plexiglass). Ordinary glass is not used for safety reasons. You can also use mirror panels, different kinds decorative plastic and metal.
Illumination of water (especially moving water!) is a very responsible event. Without lighting, a fountain or waterfall will look twice as advantageous than with competent lighting. Do not forget about such types of fountains as light-and-music (light-dynamic), which can be created without complex system illumination is simply unthinkable.
To order a decorative home waterfall on glass, decide on its location in the interior. Indicate the type of construction, the dimensions of the aqua product - length and height - send us an email for a preliminary calculation.
