Signal 20p specifications. TD Aktiv-SB: video surveillance and security systems. Technical parameters of the device

Description: Control and reception device (addressable loop expander) security and fire Signal-20P SMD, 20 loops, plastic housing.

Article: Signal-20P

Application area:

Key Features:

Programming AL types:
- security
- security entrance
- anxious
- technological

Specifications:

Parameter	Meaning
	Signal-20P SMD
Number of alarm loops	20
Number of control programs for each output	37
Internal buffer capacity	64 events
Supply voltage	10.2 to 28 V
The current consumed by the device, in standby mode:
- with 24 V supply:	200 mA to 400 mA
- with 12 V supply:	300 mA to 600 mA
Loop load current	3 mA
Control of 5 outputs (output control logic is programmable):
- three relay outputs of the "dry contact" type for switching:	with maximum voltage up to 28 V and current up to 2 A or up to 80 V and current from 0.1 mA to 50 mA (outputs "relay 1", "relay 2", "relay 3")
-two outputs with control of the health of the circuits for connecting annunciators:	with maximum voltage up to 28 V and current up to 0.5 A (outputs "relay 4", "relay 5")
Working temperature range	-30 to +55°C
dimensions	230 x 135 x 43 mm

The Signal-20P device is available in two types of cases: metal and plastic. Programming and control is carried out by the S2000 remote control or from a computer using specialized software. Signal-20P can be used both in stand-alone mode and as part of the Orion AWS. The device can be powered by 12V or 24V voltage sources. The main and backup power supply can be used, and the failure of the power supply line of one of the sources (short circuit or open circuit) does not affect the operation of the other. Signal-20P has a programmable control logic for five relays, which allows you to have 37 control programs for each output.

Application area:

Autonomous work and work as a part of ISO "Orion"

Key Features:

20 alarm loops with all types of security and fire detectors
Two power inputs: for connecting the main and backup power sources, voltage from 12 V to 24 V. A failure of the power supply line of one of the sources (short circuit or open circuit) does not affect the operation of the other
Control of output circuits "relay 4" and "relay 5", intended for connection of external annunciators, for breakage and short circuit
Programming AL types:
- fire smoke two-threshold (with recognition of the operation of one and two detectors in the loop)
- fire combined one-threshold (with the ability to connect thermal and smoke detectors)
- fire thermal two-threshold
- security
- security with detection of violation of the blocking contact of the detector
- security entrance
- anxious
- technological
- programmable technological
The ability to measure the loop resistance and transfer its value to the "S2000" console or "Orion" workstation
Operability in case of violation of the RS-485 interface and after its restoration, transmission to the "S2000" or "Orion" workstations of accumulated messages with the time of their occurrence
Connecting the key reader "Dallas Touch Memory" allows you to centrally manage (take, remove) partitions and identify the household
Programmable control logic for five relays (37 local control tactics)

Signal-20P SMD control of 20 loops, the ability to program the parameters of each loop for operation in the security or fire alarm, fixation of alarms in each loop of one and two fire detectors, fire extinguishing control outputs, control from built-in switches or via RS-485 interface from the S2000 remote control or PC.

Buying Signal-20P SMD in the specialized Jet-Video Company, you can order fast free delivery of high-quality licensed equipment by affordable prices.

Key Features Signal-20P SMD:

20 alarm loops with all types of security and fire detectors
Two power inputs: for connecting the main and backup power sources, voltage from 12 V to 24 V. A failure of the power supply line of one of the sources (short circuit or open circuit) does not affect the operation of the other
Control of output circuits "relay 4" and "relay 5", intended for connection of external annunciators, for breakage and short circuit
Programming AL types:
fire smoke two-threshold (with recognition of the operation of one and two detectors in the loop)
fire combined single-threshold (with the ability to connect heat and smoke detectors)
fire thermal two-threshold
security
security with detection of violation of the blocking contact of the detector
security entrance
anxious
technological
programmable technological
The ability to measure the loop resistance and transfer its value to the "S2000" console or "Orion" workstation
Operability in case of violation of the RS-485 interface and after its restoration, transmission to the "S2000" or "Orion" workstations of accumulated messages with the time of their occurrence
Connecting the key reader "Dallas Touch Memory" allows you to centrally manage (take, remove) partitions and identify the household
Programmable control logic for five relays (37 local control tactics)

You can be sure of the quality Signal-20P SMD. All equipment stocked by Jet-Video is covered by a manufacturer's warranty. We are glad that you contacted us to buy Signal-20P SMD We will try to make the selling process as pleasant as possible!

Specifications Signal-20P SMD:

Number of alarm loops - 20
Number of control programs for each output - 37
Internal buffer capacity - 64 events
Supply voltage - from 10.2 to 28 V
Current consumption of the device, in standby mode: with 24 V supply: from 200 mA to 400 mA, with 12 V supply: from 300 mA to 600 mA
Loop load current - 3 mA
Management of 5 relay outputs
three relay outputs of the "dry contact" type for switching: with a maximum voltage of up to 28 V and a current of up to 2 A or up to 80 V and a current of 0.1 mA to 50 mA (outputs "relay 1", "relay 2", "relay 3"); two outputs with control of the health of the sirens connection circuits: with a maximum voltage of up to 28 V and a current of up to 0.5 A (outputs "relay 4", "relay 5");
Working temperature range - from minus 30 to +50 °С
Dimensions: 230 x 135 x 43 mm

According to the instructions, "Signal-20P SMD" was developed and put into operation for operation in fire, alarm and security alarm systems. The control fire and security device can be equipped with 20 communication lines in the system. The composition includes all types of fire and security equipment for detecting and informing about the occurrence of fires or violations of the protected perimeter.

general description

In the description of the instruction "Signal-20P SMD" the device is listed as a device with control and reception functions in security and fire system. It has technological capabilities to control up to 20 areas. It receives information from warning devices that have automatic, manual or active mode. It has control over sound and light technical means of detecting and generating a fire signal. Functioning in the RS-485 software shell, it receives commands and issues information to the network controller. Such control points, according to the instructions of "Signal-20P SMD", can be control panels of the S2000 modification or a personal computer with installed on it software Orion type.

The device broadcasts alerts "fire" and "malfunction" to the fire station control panel. receives alarm notifications from this device. Interacts with Touch Memory electronic identifiers.

Purpose of the device

According to the instructions of "Signal-20P SMD", the purpose of the control device is to subordinate to its functionality the processes of arming and disarming single alarm loops. Also, the device can perform these tasks with a group of loops, it depends on the orders of the network controller.

"Signal-20P SMD" monitors breaks and short circuits on lines to which signal annunciators are connected. The device provides connection alternative source power supply to the auxiliary input. Sends the electronic ID cipher to the network controller for organized management sections. All necessary information according to the state of the partition is displayed on an external indicator built into the device (according to the instructions "Signal-20P SMD").

The operation of the device is defined as addressable and only in a joint group with the Orion security system.

The device "Signal-20P SMD" is designed to protect premises and structures from fires and unauthorized access. Such objects most often become various offices of enterprises and companies, commercial buildings, banking institutions, storage areas, residential buildings and similar covered buildings. building construction.

System operating conditions

The instruction manual for "Signal-20P SMD" recommends taking care of the device and puts forward a number of requirements for working with it.

The device must only be installed inside buildings. closed type with no heating. The power supply is specially reserved for uninterrupted operation, or there must be two of them - the main and the alternative. Required voltage varies from 10 to 28 V. It is recommended to use power supplies model range"Rip" company "Bolid". It is strictly not recommended by the manufacturer to use the Signal-20P SMD device in dusty rooms, in explosive environments and in conditions where negative environmental factors can affect the device.

Proper performance is ensured by the device in conditions at an ambient temperature of -30 ℃ to +50 ℃, air humidity should not exceed 98% at +25 ℃. Vibration pressure should be in the range from 1 to 35 Hz. If the electromagnetic environment is not suitable, the quality of the operating functions is not guaranteed by the manufacturer.

Technical parameters of the device

According to the instructions, "Signal-20P SMD" can process the information volume of 20 signal loops. Serves up to five switched circuits, the number of control circuit inputs is 26. This number includes 20 fire alarm loops, an electronic identifier circuit, two circuits of the RS-485 interface shell, controlled circuits of the outputs of two relays and inputs of the electrical power supply of the device.

"Signal-20P SMD" has 7 outlets. They are defined as 3 relay outputs for switching with a voltage of 28 V and a current of up to 2 A, 2 control outputs for connection technical means fire detection and signaling, two outputs that control an external indicator for scanning an electronic ID.

Informativeness of the system

The device notifies about such events as:

arming the loop trunks or an unsuccessful attempt;
triggering of sensors;
fire or prerequisites for its occurrence;
breaks in loops and circuits;
short circuits of own circuits;
violation of the integrity of the body;
restoration of the last and output circuits;
test run;
removal of loops from protection;
device reset;
reset alarms;
breakdown and restoration of power sources;
interruption and restoration of the technological signal loop;
quiet anxiety;
entrance area alarms;
restoration or violation of a loop disconnected from the security system;
unauthorized entry alarm.

The difference between "Signal-20P" and "Signal-20P version 01" is in the material and size of the case.

Designed for use as part of ISO "Orion" for control various types security and fire conventional detectors, contactors and signaling devices with normally closed or normally open contacts and relay control of external actuators.

Description:

Up to 20 radial alarm loops
Programmable selection of the type of alarm loops:
- type 1: fire smoke double threshold
- type 2: fire combined single-threshold (with the ability to connect heat and smoke detectors)
- type 3: fire thermal two-threshold (with recognition of the operation of one and two detectors in the loop)
- type 4: security
- type 5: security with detection of a violation of the blocking contact of the detector
- type 6: technological
- type 7: burglar input
- type 11: alarming
- type 12: programmable process
- type 16: fireman manual
- type 17: water signal
- type 18: fire launcher
Arming/disarming control of alarm loops, output relays of the device via RS-485 interface from the control panel or ISO "Orion" keypads
Connecting a key reader "Touch Memory" for user identification and partition management (taking, removing)
Programmable outputs (37 local control tactics)
Monitoring of two outputs for open and short circuit
Two power inputs: for connecting the main and backup power supplies