A watering can for flowers is an indispensable attribute personal plot, a dacha plot of land, a cottage house and even an apartment. In order for the watering can to not only play its functional role, but also to be combined with the landscape design or interior of a newfangled apartment, you need to understand where exactly you will use it.
Handmade watering cans decorate the interior and are useful to use. Every housewife loves her flowers and takes care of them. The watering can is an assistant in this matter.
Watering can for flowers
If the permanent home for the watering can will be an apartment, you can take a watering can you already have or purchase the simplest option and then paint it a uniform color. However, this option will surprise few people, because you can buy a plain watering can in a store, so why then waste time and effort on painting it?
Excellent and simple option There will be a beautiful bright sticker that is applied to the surface of the watering can. You can completely cover it, but you should understand that paper stickers will quickly get wet and deteriorate, unless, of course, you stick tape over the paper. This should be done along the entire perimeter of the drawing so that there are no gaps left, because water can get into things and seep into the depths.
As you know, they play a very important role. Some of them require special care; they should not be over-watered, which can happen if you pour water from a bottle in a large stream. You can also damage the trunk of the plant, even if you don’t notice it, but the plant will suffer.
Many indoor foliage flowers like to be watered from above, creating a rain effect. Droplets form on the leaves, and this also nourishes them. This is where a watering can will be useful, which can be combined with a sprayer.
However, it is also worth remembering that this rule does not apply to all house flowers, and for some of them, top watering will be marked by the onset of diseases and leaf rotting. Therefore, before using a watering can, read on the Internet how to properly water certain types of flowers.
How to make a watering can
Let's think about how to make a watering can with your own hands so that it not only helps you with watering, but also looks interesting and unusual.
The first and easiest option is to take and make holes in its lid using an awl. To prevent this option from looking too ordinary and banal, you can take a bottle unusual shape, having previously examined the entire range of drinks offered in the store.
It will be difficult to cover such a bottle, so if its color does not suit you, it is advisable to use paint. However, this maneuver applies to bottles whose surface is dense and does not bend, otherwise the paint will quickly crack.
However, the option of cracked paint is also not bad, because it is also interesting and unusual, but it will be suitable for you if you use a watering can, for example, in the country. For apartment option This is not suitable, because peeling paint underfoot is not what we are looking for.
DIY watering can from a glass
The watering can can also be made from a glass. It will be more difficult to process, but this version of the watering can will last much longer and will look much more aesthetically pleasing. For such a device you need to take some kind of glass or even a ceramic mug, as well as a drill.
You should be very careful with the drill, because while working to create a hole, the mug may burst or small cracks may appear on it. To prevent this from happening, the hole should be drilled carefully and slowly.
- we take the plastic tube that we prepared, in accordance with the thickness of which we created a hole;
- paint the tube and the glass itself in the same color;
- insert the tube into the glass under the flower watering can;
- We fix it with glue so that there are no gaps through which water could seep through.
It is advisable if you choose a mug that has a narrow neck, since a wide top hole will be inconvenient to handle, and to prevent water from spilling out of it, you will need to pour too little water into an already small mug.
Unusual DIY watering can
If the option with an original small watering can does not suit you, and your plans include watering large quantity flowers planted in open ground, you will probably need the idea of a large original watering can.
Take a bottle from some detergent, draw chaotic lines on it using regular paints. You will get an interesting avant-garde style watering can, on which dirt will not be too noticeable. To prevent the design from being washed off, cover the watering can with a varnish coating. You can leave such a watering can in the yard if you have one, next to which they look great decorative elements.
However, a watering can be a simple interior decoration or landscape design plot. Even if you only have, it doesn’t matter, you can put a watering can next to them, it will only decorate and add aesthetics to the atmosphere.
Indoor, garden and garden plants need regular watering. Ideally, the applied water during irrigation does not erode the soil, so for irrigation it is better to use a specialized watering can that divides the flow into several thin streams. Although this is an inexpensive piece of equipment, it is not necessary to buy it, but can be made for free in a couple of minutes from a canister that would have been thrown away anyway.
Materials and tools:
- canister with handle;
- drill;
- drill 2 mm.
Making a watering can from a canister
10-20 holes are made in the lid of the canister using a 2 mm drill. If you don't have a drill, you can burn them with a hot nail. To do this, he warms up over gas stove or an ordinary candle. To avoid getting burned, the nail should be held with pliers. It is better to burn the lid on outdoors, as smoke and the smell of burnt plastic are released.
To prevent the canister from deforming when pouring water, and the liquid flows out quickly, air must enter the watering can to prevent a vacuum. To do this, you need to make one hole in the handle near the neck with the same drill or nail. After filling, the watering can is ready for use.
The advantages of using a homemade watering can made from a rigid canister with a handle over an ordinary PET soda container are undeniable. This homemade product is much more spacious, it does not shrink when pouring, thanks to the handle it fits more comfortably in the hand, and water flows out of it in even streams without jerking.
A watering can for flowers is an indispensable attribute of a personal plot, a dacha plot of land, a cottage house and even an apartment. In order for the watering can to not only play its functional role, but also to be combined with the landscape design or interior of a newfangled apartment, you need to understand where exactly you will use it.
Handmade watering cans decorate the interior and are useful to use. Every housewife loves her flowers and takes care of them. The watering can is an assistant in this matter.
Watering can for flowers
If the permanent home for the watering can will be an apartment, you can take a watering can you already have or purchase the simplest option and then paint it a uniform color. However, this option will surprise few people, because you can buy a plain watering can in a store, so why then waste time and effort on painting it?
An excellent and simple option would be a beautiful bright sticker that is applied to the surface of the watering can. You can completely cover it, but you should understand that paper stickers will quickly get wet and deteriorate, unless, of course, you stick tape over the paper. This should be done along the entire perimeter of the drawing so that there are no gaps left, because water can get into things and seep into the depths.
As you know, plants play a very important role in the interior. Some of them require special care; they should not be over-watered, which can happen if you pour water from a bottle in a large stream. You can also damage the trunk of the plant, even if you don’t notice it, but the plant will suffer.
Many indoor foliage flowers like to be watered from above, creating a rain effect. Droplets form on the leaves, and this also nourishes them. This is where a watering can will be useful, which can be combined with a sprayer.
However, it is also worth remembering that this rule does not apply to all house flowers, and for some of them, top watering will be marked by the onset of diseases and leaf rotting. Therefore, before using a watering can, read on the Internet how to properly water certain types of flowers.
How to make a watering can
Let's think about how to make a watering can with your own hands so that it not only helps you with watering, but also looks interesting and unusual.
The first and easiest option is to take a plastic bottle and make holes in its lid using an awl. To prevent this option from looking too ordinary and banal, you can take a bottle of an unusual shape, having first examined the entire range of drinks offered in the store.
It will be difficult to cover such a bottle, so if its color does not suit you, it is advisable to use paint. However, this maneuver applies to bottles whose surface is dense and does not bend, otherwise the paint will quickly crack.
However, the option of cracked paint is also not bad, because it is also interesting and unusual, but it will be suitable for you if you use a watering can, for example, in the country. This is not suitable for an apartment option, because peeling paint underfoot is not what we are looking for.
DIY watering can from a glass
A watering can for your home can also be made from a glass. It will be more difficult to process, but this version of the watering can will last much longer and will look much more aesthetically pleasing. For such a device you need to take some kind of glass or even a ceramic mug, as well as a drill.
You should be very careful with the drill, because while working to create a hole, the mug may burst or small cracks may appear on it. To prevent this from happening, the hole should be drilled carefully and slowly.
- we take the plastic tube that we prepared, in accordance with the thickness of which we created a hole;
- paint the tube and the glass itself in the same color;
- insert the tube into the glass under the flower watering can;
- We fix it with glue so that there are no gaps through which water could seep through.
It is advisable if you choose a mug that has a narrow neck, since a wide top hole will be inconvenient to handle, and to prevent water from spilling out of it, you will need to pour too little water into an already small mug.
Unusual DIY watering can
If the option with an original small watering can does not suit you, and your plans include watering a large number of flowers planted in open ground, the idea of a large original watering can will certainly come in handy.
Take a bottle of some detergent and paint chaotic lines on it using regular paints. You will get an interesting avant-garde style watering can, on which dirt will not be too noticeable. To prevent the design from being washed off, cover the watering can with a varnish coating. This watering can can be left in the yard if you have alpine slide, near which decorative elements look great.
However, a watering can can be a simple decoration for the interior or landscape design of the site. Even if you only have artificial flowers, it doesn’t matter, you can put a watering can next to them, it will only decorate and add aesthetics to the atmosphere.
Anyone who grows seedlings knows firsthand how difficult it becomes to water seedlings when they grow. To somehow make their work easier, summer residents invent various watering cans. We invite you to familiarize yourself with some of them.
1. Insert a slightly curved tube into a clean plastic bottle (1.5-2 l). It should be longer than the height of the bottle so that you can easily water the seedlings even in the most inconvenient place.
To prevent it from decreasing in diameter (flattening) when bending the tube, cover one edge of the tube with plasticine or clay, pour in water and place in the cold (you can freezer), so that water does not spill out of it. When the water turns into ice, bend the tube. In this case, the handset itself will receive the required form, and the ice will not allow the walls of the tube to shrink.
Many gardeners grow seedlings in foil containers, and a watering can made in this way will be an excellent assistant in caring for seedlings.
2. Sometimes seedlings do not require root watering, but with the capture of leaves. To avoid accidentally dousing the seedlings with water, make a shower head with your own hands.
Wash the half-liter plastic bottle thoroughly, remove the stickers from the outside and use a marker to put dots in place of which you will later make holes. Place the dots in a 5x5 square.
Hold the head of the nail in the pliers and burn the end of the nail over a fire (candle) for 20-30 seconds. Now pierce the drawn points with a heated nail. When the nail cools down, heat it again. On back side Using a knife, cut out a hole in the bottle for filling with water so that it is 2-4 cm higher than the watering holes. Fill the bottle with water and carefully place it in a horizontal position above the plants.
For convenience, you can use tape to make a handle on a watering can.
3. There are never too many watering cans, either at the dacha or at home for seedlings and plants. Many plants cannot be watered with a hose, this rule is especially often heard in greenhouse gardening, so it is best and easiest to have a watering can at every step. In order not to spend money on the purchase, we suggest making it yourself. To do this, take any plastic canister (for water, car oil), polypropylene pipe 50 cm long and rotated 60°.
Place a “turn” near the bottom on a flat place and use a marker to mark the diameter of the future hole. Cut out and try on how easily the pipe fits into the canister (there should not be a large gap). Thoroughly lubricate the joint with hot glue, insert the pipe and leave to dry. Next, all you have to do is put a piece of pipe on the pipe and, if necessary, shorten it by cutting off the excess. The optimal length of the “spout” is considered to be the height that does not exceed the lid of the canister.
Tie the tube (spout) to the handle of the canister so that it does not break under water pressure. You can insert a cut plug into the spout so that the water fan out in a limited flow. If you have to use a watering can to scoop up water in a well, then for ease of filling with water, make a hole on the opposite side of the spout so that the air can quickly escape.
4. You can also make an excellent watering can from a small plastic container (shampoo bottle). To do this, just make holes at the bottom with an awl or nail. Fill a container with water, close the neck, turn it upside down and water.
5. You can make the most primitive watering can. Make holes in the lid of the plastic canister and on the opposite side for air to escape.
6. If it is not possible to regularly water seedlings or seedlings, then it makes sense to use automatic watering. For this at the bottom plastic bottle Make holes with a hot nail, fill the container with water and close the lid. Plant bottles in the ground near each plant in the garden or one for several seedlings.
As you can see, there are many options for making a watering can with your own hands, choose yours, make it and share your suggestions.
Spring is the time for dacha work. For some, a summer cottage is a place of relaxation, while others prefer to plant it with various vegetable and fruit crops. In any case, care for various vegetation will be required. First of all, you need to ensure sufficient watering. An ordinary watering can can save the situation. It is practical and very convenient; it allows you to water plants in difficult places and provide them with a water supply. In summer cottages, any container will not be superfluous.
Ranok suggests various options watering cans that are colorful color scheme and its funny and interesting shapes. You can also choose the size that is necessary and can satisfy any client. If you don’t want to spend money, you can do it yourself.
A homemade watering can is the optimal solution that will allow you to use your creativity and also save money. cash. You can make an object from available materials, for example, a plastic canister.
What types of watering cans are there?
Hardware stores offer watering cans for different purposes. They differ in their design, shape and even color. Manufacturers produce them in large quantities, which easily fill the shelves and provide consumers with unlimited choice. But before buying this equipment, you need to focus on the basic parameters. They are the ones who will help you make the right decision.
According to the purpose of use, they are divided into: garden and indoor.
- Watering cans for the room are designed for watering house plants and seedlings that are in pots. The design is distinguished by its thin spout and small size. Thanks to this structure of the spout, the watering can will perfectly water the plants in hard to reach places. The models differ in their design and shape. The main material is plastic. Sometimes there are metal or ceramic ones, which can also serve a decorative function. Particularly popular are watering cans whose paint is specially aged;
- Garden watering cans will be excellent helpers in a small garden area: beds, flower beds, greenhouses. They can be used to water young trees or shrubs.
Important! Manufacturers are developing garden watering cans with designs that help water plants for more productive gardening. It is distinguished by a wide filler neck, sometimes with a edging that prevents water from splashing.
- watering cans for decoration perform only an aesthetic function and serve as decoration for the overall picture summer cottage. Various flowers often grow in it, but buying such a thing is not always necessary. Old watering can, and a little imagination - this will help transform the object.
DIY watering can from a canister
To avoid extra costs, a self-made watering can from a canister would be a good option:
- first you need to take any plastic canister and check it for cracks and clean it of dirt; you will need a plastic tube 45-50 centimeters long and rotated 60 degrees;
- at the bottom, where there is a flat place, use a marker to trace the pipe;
- cut a circle along the marked line, check that the tube fits well;
- Lubricate the joint well with hot-melt adhesive and leave until completely dry;
- mark the optimal spout length
Important! The optimal length is the one that is not higher than the lid of the canister.
- the spout is tied to the handle of the canister so that it does not break due to water pressure;
- A tube is inserted into the spout, which allows water to fan out.
In addition to the canister, you can choose another plastic item.
