Everyone knows that the bath procedure includes two stages - warming the body with steam and washing. In Russia, they often add a “third element” - a short-term immersion in cold water. The temperature contrast increases the pleasure of a hot steam room and hardens the body.
The bathhouse owner inevitably faces the question: where to find a sufficient volume of water for such a bath? It's good to have an open body of water nearby. If you don't have one, you will need a pool or plunge pool.
Building a swimming pool is a complex and expensive undertaking. It is for this reason that hot tubs attract the attention of connoisseurs and bathhouse lovers.
Today, dozens of manufacturers offer bathing containers, using a variety of materials for their manufacture: from wood and plastic to of stainless steel. We will talk about what types of bath tubs exist and whether it is possible to make such a design with your own hands in this article.
“Classics of the genre” - a wooden bathhouse. She is the ancestor of all such structures. At its core, it is an ordinary, but very large barrel, held together with steel hoops. It is not very convenient to maintain, since you have to manually pour and pour water out of it. Modern wooden baths have come a long way. They are equipped not only convenient system water supply and drainage, but also heating and a hydromassage module.
The round shape of the font is not the only one. There are rectangular, corner and oval designs on sale, as well as wooden containers made in the form of a bathtub.
Wooden single hot tub with hydromassage
In Russian traditions, it is not customary to bathe in hot water. The ice hole and the frost-covered two-hundred-tank barrel served as fonts for Russian heroes for centuries.
The barrel for a bath with heated water was invented by the Japanese. Their body cleansing process consisted of two stages. First, the samurai climbed into a barrel of hot sawdust (ofuro) and sweated in it until exhaustion. After this, he moved into a wooden container with hot water(furako) and washed in it.
Nowadays, a classic Japanese bathhouse is rarely found in the vast expanses of Russia. At the same time, the idea of furaco itself turned out to be productive and was embodied in the designs of heated fonts.
Bath tubs with built-in wood stove
The disadvantage of this system is the reduction in useful volume due to the presence of a stove. Therefore, many buyers prefer models with an external heat generator.
Baths with a stove installed outside
Heated containers are placed on outdoors. Regular bathing barrels are designed to be placed inside a bathhouse.
Depending on the type of body material, bath tubs are divided into several types:
- Wooden.
- Concrete.
- Plastic.
- Steel.
- Combined (wood+plastic, wood+steel).
It should be noted that wooden structures- the most difficult to manufacture and operate. Natural wood is susceptible to drying out, which leads to leaks.
To combat them, use a locking configuration of the joints of the boards from which the body is assembled. In addition, on wooden barrels They put on steel hoops that have tension devices. When the container dries out wrench tighten the threaded rods.
The most common material for making wooden hot tubs is oak. In addition, beech, larch and cedar wood have proven themselves well in use.
Wood is a material that is optimal in terms of bathing comfort and health benefits. However, the problem of tightness is easier and more reliably solved in a seamless design. Therefore, plastic hot tubs can be considered as inexpensive and affordable alternative wooden.
All summer residents and estate owners are familiar with a design called a Eurocube - a plastic container enclosed in a steel frame. With minimal modifications you can build a quite decent font from it.
To do this, the cover of the structure is cut off. To improve the aesthetic qualities, home craftsmen sheathe a font from a Eurocube wooden clapboard or plastic siding.
Eurocube font, covered with siding and wooden lining
You can combine the beauty of wood texture and absolute waterproofness in combined design. Its outer part consists of wooden slats, like a classic barrel. A plastic liner is placed inside, which, unlike wood, does not dry out, turn black or swell.
The best option is wood on the outside, plastic on the inside.
Some manufacturers replace the hard plastic liner with elastic and durable PVC fabric. In this case, the supporting base of the font becomes a metal frame.
Frame hot tub with PVC membrane
Not everyone likes to climb into a swimming pool using steep stairs, so these structures are often buried in the ground. For obvious reasons, wood is not suitable for such purposes. Concrete and plastic – optimal materials for contact with the ground.
Stainless steel bathtubs are less common than others. This is due to three reasons:
- Metal releases heat very quickly to the environment.
- Contact with him is not very comfortable.
- The cost of the structure is quite high.
The only effective option for heating a metal container is a fire built under its bottom. It must be admitted that some design solutions steel fonts look very original.
A high-quality font can be built from monolithic concrete. Place it outdoors or indoors.
The sequence and technology of such construction is familiar to everyone who has poured a foundation at least once:
- pit;
- formwork;
- waterproofing;
- fittings;
- concrete;
- cladding
Before pouring concrete, fittings, water supply and sewerage pipes are installed into the font structure. To reduce heat loss as external permanent formwork Extruded foam boards are used.
Concrete font in the process of manufacturing
In the open air, the monolithic structure is deepened into the ground. In the bathhouse, you can do the same or raise it above the floor level.
The simplest outdoor heated wooden swimming pool is built quickly and easily. Having dug a pit, a plank bottom is laid in it, and tongue and groove boards are placed along the walls. The space between the font and the ground can be filled with sand. Having installed the stove in the wooden bowl, you can immediately begin washing.
The simplest version of a bathing tank is formwork made of boards installed in a pit
Approximate prices of ready-made hot tubs
Having considered existing options bathing containers, it’s time to decide on their cost.
Wooden double structures can be purchased at prices starting from 36,000 rubles. For a larger font made of larch or oak you will have to pay at least 70,000 rubles. Equipping such a container with a stainless steel stove will cost 35,000 rubles.
Prices for plastic hot tubs with a volume of 1.0 m3 or more start at 12,000 rubles. Tent (film) structures are a little cheaper. Their price tags start at 7,000 rubles.
A stainless steel vat designed for 2-3 people can be purchased at a price of 120,000 rubles.
How to make a font yourself?
If you really want, you can assemble such a structure yourself. Anyone who confidently works with wood can try their hand at making a wooden hot tub. For this work you need a minimum set of tools: a circular saw, drill, grinder, jigsaw, milling and jointing machines, tensioning mechanism with tape.
The preparatory stage includes several operations:
- Assembling the bottom panel from tongue-and-groove boards.
- Cutting wooden staves - planks for the wall.
- Making steel hoops for tightening containers.
The number of planks for the walls is calculated based on the size of the font. The most convenient way to do this is to draw the outline of the bottom of the future container on the shield.
The shape of the joining part of the strips should ensure tight contact. Most often it is made oval or semicircular.
The oval shape of the docking lock ensures tightness and facilitates assembly
Having determined the number of boards needed for the wall of the font, the bottom is carefully cut out of the shield using a jigsaw. After this, they take a router and cut a tenon along the entire circumference of the bottom at its end.
Connection of the bottom of the font with the wall
Having prepared three strip steel hoops with tightening devices, you can begin assembly.
In order to make a high-quality font with your own hands, all seams must be processed before joining silicone sealant. It will protect the container from leaking when the boards dry out.
In order to have enough space under the font for installing a drainage system, the length of the boards must be increased by 10 cm so that they form a supporting contour below the bottom mark. At the same time, a drain hole is drilled in the bottom of the font.
After this, the bottom is placed on a support and connected in series with the boards of the walls. The last stave board is driven from above by blows of a mallet with a rubber striker.
Wooden font assemblies
The last operation is the installation of steel hoops. To do this, the walls of the font are compressed special device– wide flexible tape with a tension mechanism.
Having pulled the wooden container along the contour, hoops are put on it. After tightening them with a wrench, the work can be considered completed.
The hot tub stove is made of stainless steel. Its design is very simple: a sealed tank with top loading of fuel and a chimney installed above the firebox.
An external heat generator is more difficult to manufacture, since it has a heat exchanger in its design. Submission hot water in the heating “coil” of the font performs circulation pump.
The character of the fairy tale “The Little Humpbacked Horse”, after emerging from the “rejuvenation” vat, turned into a handsome man. It turns out that such vessels have been known since the 16th century. Today it is an elite bath with an amazing effect. We will tell you how to arrange such a bathhouse for yourself in this article.
Content:
A modern bath tub is made of cast iron or stainless steel. It is installed in the fresh air near the source cold water. There is a stove under the bowl. It heats up the water in the boiler and cooks you like soup on a fire. You can add aromatic herbs or decoctions of them as spices. However, there is no need to worry - the temperature of the “broth” is not raised above 45 degrees. Thanks to the correct installation of the entire structure, it is very easy to get into the vat without getting burned, since the edges of the bowl will not heat up.
Advantages of a cast iron bath tub
In an exclusive version, water from mineral springs is used for bathing in the vat. When heated, it envelops the entire body with warmth and gradually relaxes it. If, after such relaxation, you plunge into an ice hole or a cold plunge pool, you can get magical pleasure and healing effects from the temperature difference. If you use your vital resources wisely, the risk of getting sick from such swimming is reduced to zero.
Smooth steaming of the body in the warm water of a vat with periodic plunging into an ice hole, river or cold plunge pool brings undoubted benefits to the entire human body:
- With regular use of such bath procedures, you will comfortably lose weight. excess weight and you will feel in excellent tone.
- There is an improvement in the functioning of the excretory and cardiovascular systems.
- Renal activity improves.
- The pores of the skin open and the body breathes, which has a calming effect and a healing effect on the skeletal muscles, lungs, bronchi and digestive organs.
- Increased blood circulation, which leads to the rapid elimination of toxins and activation of the immune system of body tissues.
- Radiculitis, osteochondrosis and rheumatism disappear.
- Ridding blood vessels of cholesterol “plaques” when swimming with temperature changes.
- Hardening and gradual increase in endurance.
There is an opinion that after a dozen such procedures, relief from colds is guaranteed for at least one year. And for lovely ladies, such bathing will provide an excellent opportunity to get rid of cellulite and get a beautiful body.
Choosing a bath tub
Mass production of cast iron vats for baths is carried out by factory workshops that cast products not only from cast iron, but also from other metals. Such bowls are quite expensive and are intended for exclusive baths. However, any person of average income is able to secure such a purchase.
When choosing a vat, pay attention to the type of metal for its manufacture (cast iron, stainless steel, etc.), specifications and the cost of the product.
Their cost depends on the size and weight of the vats:
- The vat, which has dimensions of 2000x730x30 mm and a weight of 1200 kg and is used for four people, costs 200,000 rubles.
- A vat with dimensions of 2200x740x40 mm and a weight of 1600 kg for six people will cost you 250,000 rubles.
- A vat 2500x830x30 mm, which weighs 1800 kg and is designed for eight people, is more expensive - 325,000 rubles.
- The vat, whose dimensions reach 2700x840x40 mm and weighs 2150 kg, is suitable for ten people and is the most expensive option - 380,000 rubles.
Features of the construction of a bathhouse with a cast iron vat
Any visitor to the bathhouse, which is equipped with a stove with a cast-iron vat, should see that this is not hell, but a health complex. Therefore, the conditions in it must comply with safety rules and provide the necessary comfort for the adoption of procedures.
Designing a bathhouse with a vat
The connection of such a bathhouse to the area and nearby buildings is of no small importance. When naked or half-naked, a person should feel protected from unwanted intrusion, comfort and unity with nature.
In addition to the above, proper design of a bathhouse with the installation of a cast iron vat should take into account the following factors:
- Durability of the structure;
- Resistance of furnace materials to high temperatures- from 700 to 900 degrees Celsius;
- The ability of the foundation to withstand heavy weight;
- Reliable removal of smoke from the stove into a separate air duct;
- Availability of control and change of water temperature;
- Supplying water to the vat and draining it;
- Drainage removal of excess water from spills when swimming;
- Convenient implementation of hygiene measures;
- Equipped passage from the bathhouse to the reservoir or font;
- Availability warm room with amenities for changing clothes and leisure.
Construction of a bathhouse with a cast iron vat
A bathhouse with a cast iron vat provides less stringent conditions for health-improving activities than a traditional Russian steam room with a broom. This is due to its design, which includes:
- A cast iron bowl with a diameter of 2-2.7 m, a depth of 0.74-0.84 m and a wall thickness of 30-40 mm;
- Furnace-pedestal for a vat of water;
- A system for discharging combustion products into a separate chimney;
- System for supplying and discharging water in the vat;
- Drainage system for excess water;
- Equipped access to the bowl and seating area;
- A natural pond or cold water plunge pool.
Installing a vat in a bathhouse
At first glance, installing a cast iron vat seems to be simple: lift the boiler onto the stove, light the fire, pour in water and enjoy yourselves. In fact, this is a very responsible process. Every mistake made at any stage of construction can lead to dire consequences.
For the durability of such a serious structure, it is necessary to lay a powerful foundation that will be able to withstand the considerable weight of a brick structure made of heavy fireproof material and a massive one and a half ton vat filled with water.
In turn, so that the brick structure can withstand its weight and thermal load, it is performed in the form reinforced masonry made of refractory brick. And since the latter is carried out according to the geometric contours of the vat using wedges and trims, such work must be performed by a master with extensive experience. It is also important to take into account the thermal linear expansion of the brickwork.
When the steamer relaxes in the warm water of the vat, the soot from the burned fuel will be clearly unnecessary for him. Therefore, the combustion products of furnaces must be discharged into a separate pipe.
An equipped system for supplying cold water and extracting hot water must provide it comfortable temperature in a vat.
If the bathhouse is used for commercial purposes, the issue of container hygiene is especially acute. It is solved by complete drying bowl and heat it over low heat.
The paths to the vat, the process of loading and unloading people from it must be absolutely safe even in conditions of exceptional relaxation and tranquility of their bodies.
What a vat looks like in a bathhouse - look at the video:
And finally, remember one more thing. In the open air, a cast iron vat very quickly becomes covered with a layer of rust. Therefore, you will have to be patient and produce daily mechanical cleaning DIY sauna vat.
Bath tub - replacement of the font. It is made of stainless steel or cast iron. It is a hemispherical bathing container. The product is placed in an area next to the bathhouse, where there is a source of water. A stove is installed below or a fire is lit to heat the water. The temperature of the latter is maintained at up to 40°. The design heats up so that the edges remain cold, so it is impossible to get burned during use. The article describes the design of the vat and provides instructions for its installation.
Bath tub
The purpose of the sauna bath is to relax the muscles of the human body and nourish the skin and internal organs minerals. For this original designs installed near groundwater sources. Staying in a hot container is combined with swimming in the cold water of a river or lake, which is similar to a Russian bath. The temperature difference tones the pores and blood vessels, strengthening them. The advantages of a sauna vat at home are also considered:
- the ability to lose excess weight;
- stabilization of the excretory system;
- beneficial effects on renal activity.
- calming the nervous system;
- improvement of skin permeability;
- pore cleaning;
- relaxing effect on the musculoskeletal system;
- beneficial effects on the respiratory and digestive organs;
- increasing immunity due to the removal of toxins from tissues;
- relief of manifestations of rheumatism and osteochondrosis;
- body hardening.
According to reviews from those who have appreciated the benefits of bathing in a vat, it is clear that after a ten-day course, colds recede for a year.
Cast iron vat for bath
Cast iron is a high-carbon metal that is heavy. It is impossible to make a bath tub from it at home, so they are assembled in production by pouring into molds. Advantages of the material:
- heat capacity;
- wall thickness;
- life time.
Thanks to thick walls, the water takes longer to heat up, but also long time maintains temperature, which is important when sub-zero temperatures. There are also disadvantages:
- price.
The weight of a vat for four people reaches 1.2 tons. Installation requires a forklift to transport it to the site. It is impossible to remove the container for storage, so a cover is built to protect the product from rusting. When choosing, pay attention to the quality of workmanship. The edges must be sanded, without flash. Porosity and wall thickness uniformity throughout the vat are analyzed. They take into account the warranty that the manufacturer is willing to provide. If the container is painted, then the composition must be fire-resistant, since the surface will be exposed to open fire.
Information! Cast iron is a brittle metal, so when using the vat, avoid strong blows and sudden changes in temperature.
Stainless steel bath tub
Bath vats are also made of stainless steel. They are not cast, like cast iron, but assembled from several parts. The advantages of this product:
- long service life;
- relatively fast heating;
- appearance.
The metal is not susceptible to corrosion, so it can be left in open areas without fear of destruction. The wall thickness is thinner, so the container heats up faster than the cast iron version. No coloring required. If the surface is covered with oxides, it is polished. Disadvantages of a stainless steel vat:
- price;
- manufacturing defect.
If there is no ultrasonic assessment of welding quality in production, then cavities may remain in the seams, which manifest themselves during operation. The disadvantage can be mitigated by an experienced welder. For 4 people, purchase a bath tub with a diameter of 2 m and a height of 73 cm. If you want to accommodate a company of 6 people, you need a diameter of 2.2 m. Eight visitors to the bathhouse will fit in a container with a diameter of 2.5 m and a depth of 83 cm.
Advice! It is better if the bath tub is made of food grade stainless steel. Metal with grade 430 is technical and produces oxides upon prolonged contact with water. It is suitable for collecting containers, but will require periodic maintenance and cleaning.
Do-it-yourself sauna vat: drawings
Before making a sauna vat with your own hands, think through the place of its installation. The connection to communications and neighboring buildings is assessed. The service life is taken into account. If it is less than 2 years, then the project is not economically profitable. If you want to place a container inside the bathhouse, calculate the bearing capacity of the foundation and the need to install additional supports. Do not light an open fire indoors, because... carbon monoxide will lead to poisoning. They think over the design of the stove for the vat and the method of removing smoke. Take into account the method of filling the container and drainage of liquid spilling over the edges.
After preparing the site, a drawing is developed. An example can be seen above. Since it is impossible to make a hemisphere with a diameter of 2 meters on your own, the container is assembled from separate parts. Each of them is an equilateral trapezoid.
To give it a smooth shape, it is bent at two points, as can be seen in the example of the second drawing. To correctly calculate the components, make a scale model from cardboard.
The parts are glued together with tape or other material, as can be seen in the photo above.
After measurements, the theory is tested in practice by making a metal vat to scale according to the drawings, as shown in the photo. This is necessary to determine the number of consumables and the strength of the seam.
From sheet metal parts are cut to actual dimensions and bent with a given radius to achieve a diameter of 2 meters or more. The walls are not welded with a single seam; they are secured with tacks in order to make adjustments if necessary.
If everything is in order, then the joints are completely boiled, making sure that there is no distortion due to thermal expansion. To strengthen the sheet metal, stiffeners are fixed in two levels, as seen in the photo above. They compensate for water pressure and reduce stress on the seams.
If the vat will stand separately, then a frame will be built under it. Use a square with a cross section of 60 mm. Provides the ability to drain water from the container. To do this, a piece of pipe with a diameter of ¾ inches is welded to the bottom, a thread is cut at the end and a tap is screwed on. Next, a hole is drilled, connecting the bath tub to the pipe.
The inside of the container is decorated with a bench, a wooden bottom is made or it is laid out from river stone so that the feet do not touch the surface that is subject to heating. For convenience, wooden railings are fixed along the contour.
For the convenience of collecting ash, if there is no stove under the bath tub, install a box similar to the one in the photo above. A grill is placed at the bottom, and a hole is drilled on the sides for air circulation. Install it on guides that will prevent it from moving from the given path.
To make it easier to climb into the bath tub, install a ladder made of larch or decking boards. A lid is cut out of plexiglass, which reduces evaporation and promotes rapid heating of water.
Installing a vat in a bathhouse
If the vat is installed in a bathhouse, then you can use the diagram-drawing given above. Lay on loose soils pile foundation. For independent construction, screw metal piles are used. They are a metal rod with a spiral at the end. The latter holds the support, preventing it from going deeper and moving. After installing the supports under the foundation, a concrete grillage is poured around the perimeter, which is tied with reinforcement to the piles.
Mark out the area for the bath tub. It will require a separate foundation, since the pressure from it is directed over a smaller area, which can deform or destroy the foundation. Select a square, the side of which exceeds the diameter of the container by 20 cm. Dig a pit to a depth of 30 cm. Screw piles into the corners so that the upper end is 10 cm below the ground level. Place river sand in a layer of 10 cm at the bottom of the pit under the bath tub. cm and compact. Medium-grain gravel is poured on top with a 10 cm layer and leveled.
Stands 5 cm high are evenly placed, on which a metal grid is placed, which will strengthen the concrete structure. Formwork is placed around the perimeter of the pit for the bath tub. Concrete is poured inside and leveled according to the rule. It takes a month to gain strength. At this time, the concrete is moistened and covered with film to prevent it from cracking. After a month, a stove is installed on the foundation and connected to a metal stand for the sauna vat. Make a conclusion for the smoke outside the structure. Use a lift to place the container in place and fix it to the frame by welding, if necessary.
Another option for installing a bath tub is hanging. A foundation is built under it in the manner described above. In this case, the platform is expanded for three supports that will hold the container. The latter can be wooden or metal. They are assembled in a pyramid to evenly distribute the load. At four points, metal arcs are fixed to the bath tub, and a chain is attached to them. The container is lifted and the chains are attached to the top of the pyramid of supports. An overview of the sizes and types of structures is in the video below.
Conclusion
A sauna vat is a structure that can be installed in a sauna complex or separately. The container is placed on a metal stand or placed on a concrete oven base. Select a place that is protected from winds, has a communications connection and drainage system. The water is heated to 40°, which relaxes the body. Keep your head cold while bathing. You can make a vat-font yourself from sheet metal. According to the drawings, blanks are made in the form of an isosceles trapezoid or an equilateral triangle, which are joined by welding seams.
A bathhouse is not only a steam room, but also a convenient washing room. Of course, you can only use a bowl of water and a ladle, but it will be much more convenient to perform bath procedures in the font. A font is a kind of barrel where there can be cold or warm water. It can be used to wash your body or to cool down after a long stay in the steam room. Today we will tell you what types of fonts there are, and how to make such a device with your own hands.
Types of wooden bath tubs
The best location for a bathhouse is considered to be located near a pond. However, not everyone can afford to dig their own personal pond or buy a plot of land with a lake. In this case, you can install a pool on the site or in the bathhouse, but again, such structures require large financial investments and a lot of free space.
So what should those who cannot place a full-fledged swimming pool on their property and in their bathhouse do? In this case, a sauna font would be an excellent option.
A Japanese bath is a heated barrel that can accommodate several people. Furako and ofuro are a kind of prototype of the font.
This design is a vat of water. In this case, the liquid in it can be both cold and hot. There are several types of fonts.
Types of bath tubs:
- Recessed font for swimming - this is the most expensive type of such devices. It is a dug hole that is lined facing material, and from above it looks like a swimming pool. A staircase is lowered into the font, along which a person descends and takes water procedures. The water in such structures can be cold or warm. It can be installed outdoors and in a bathhouse.
- Open font- This is a barrel that is connected to the water supply. It can be purchased at finished form or assemble it yourself. This option is good because it can be connected after the construction of the bathhouse. This type of barrel can be used outdoors or in bathhouses.
- Bath tub of pouring type least expensive. It is installed on the wall and connected to the water supply. A cord is tied to the barrel, by pulling which you pour water on yourself. Then the bucket returns to its place on its own and water is filled into it. This device can be used separately or in combination with other hot tubs.
Such designs can be made to order or made independently. We will tell you how to do this a little later.
Material for heated hot tubs
Before you start choosing or making a bath tub, you need to decide what material it will be made of. In fact, there are many options here.
Modern industry has taken the lead, so now bath accessories are made from the most different materials. There are even plastic bathtubs that look like wood.
The materials for making a font can be very different. Of course, not all of them you can use for self-made designs, but you can buy any option.
Materials for fonts:
- Concrete fonts are the most durable, but labor-intensive option to manufacture. Such structures usually have a recessed appearance.
- Plastic hot tubs are the most popular. It's all about their low cost, ease of care and a large selection of shapes and colors. However, this option will not be able to keep water cold for a long time in a hot room.
- Metal baths are not very popular, but they look very stylish and perfectly maintain the water temperature. However, they are difficult to install and quite heavy, and they will not fit into any interior.
- Composite bathtubs are very light, but at the same time durable. They are believed to be stronger and more durable than concrete.
- The most expensive is considered to be a wooden bathhouse. Not only does it look beautiful, but it brings real health benefits. The cost of such products depends on what kind of wood they are made from.
Whatever material you choose, you will undoubtedly be pleased with such bath equipment. However, you need to pay attention to its design.
Additional functions of bath tubs
Bath tubs can have additional properties, thanks to which both Russian and Finnish baths will become much more comfortable. Let's take a look at some of them.
Additional functions of the font:
- Heated hot tubs are designed for swimming after a bath. They will appeal to those who do not like cooling water treatments. To create this effect, a stove is placed in the barrel and covered with a grate.
- A sauna barrel with hydromassage will allow you to relax and have an anti-cellulite effect. This massage is based on the fact that your body will be massaged by thin but strong streams of water.
- Such a device can be equipped with backlight. For this you will need waterproof LED lights. There are quite a few ready-made options with such an interesting feature.
Of course, you must understand that it is not the pouring device that is equipped with such functions, but an open or recessed device. By the way, a heated font is an excellent bath in the country. You don't even need a water heating furnace.
We make a concrete bath tub
A concrete font for a bath is the best option, after the tree. Such structures are strong and durable. They look very beautiful and incredibly stylish. Therefore, we invite you to see how to do similar device with your own hands.
Making a concrete font is a long and labor-intensive task. However, the result will exceed all labor costs.
A bath font can even be made from scrap materials. However, now we propose to look at its production from concrete. We advise you to draw up drawings of its dimensions in advance.
Step-by-step instructions for making a concrete font:
- The first step is to dig a pit. It will have a depth of one and a half to two meters. A layer of sand is poured to the very bottom of the pit. You also need to install plumbing and sewerage in advance.
- The font is made on the basis of a metal frame. To do this, reinforcement with a thickness of 1.5 cm is laid in a grid at a distance of 5 cm from the bottom. The edges of the pit are made from the same reinforcement. To keep the structure in place, the reinforcement is secured with wire. Brick stands will help ensure the required distance from the bottom.
- Now you need to make formwork from chipboard and timber. It is placed 5 cm higher reinforcing mesh, as well as on the sides and bottom of the frame.
- Now you can begin the most important process - pouring concrete. The walls are poured first, and then the bottom. All concrete work must be done in one go.
- A week after pouring, the formwork must be removed. The resulting base is leveled and covered with a waterproofing compound.
- Now comes the fun part - the finishing. At this stage, you can give free rein to your imagination. However, remember that all materials must be treated with compounds that increase their moisture-proof properties. This is especially true for wood.
- On last stage the ladder and all other necessary components are installed.
In fact. Such work is more difficult to carry out than it seems. This will take a lot of time and take a lot of effort and nerves. Therefore, it is better for you to get an assistant.
DIY wooden font
External wooden fonts are also very popular. You can use the most different wood. However, in this case you need to take care of its moisture-proof properties.
Some people manage to make a font from a Eurocube. Of course, such designs do not look very attractive, but they fully perform their functions.
So, a wood-burning font is made quite simply. Essentially it's a barrel. To make it, you can use a tongue and groove.
How to make a plank font:
- Wooden slats are glued together into a square. They are clamped with a clamp until completely dry. A circle is cut out of them.
- You need to make a hole in the center of the circle to drain the water. If the drainage is carried out by a pump, then you skip this step.
- In the slats, using a cutter, you need to make side edges that will be inserted into each other. They also need to be inserted into the bottom of the font.
- Metal ties are placed on the walls of the font. Additionally, you need to secure the structure with bolts.
- Now sand the outer and inner walls.
- Equip the product with a bench and ladder.
This font is suitable for taking water procedures or cooling after parka. It is ideal for relaxation after a stay in a wood-fired sauna.
Making a wooden font
A pouring font is essentially a bucket. Therefore, to make it you can use finished product by simply hanging it on the wall and connecting it to the system.
How to make a pouring font:
- Attach three wooden planks with bolts into a structure similar to the printed number 4. You need to make two of these parts. Their long sides are connected to each other by three cross bars. The bucket should pass freely between the ears of these parts.
- The bucket is attached with bolts to the ears of the product. At the same time, it should turn over freely and return back.
- In the top of the bucket you need to drill a hole for the cord and insert it there. A pipe with a float system is installed on the back of the bucket.
- The finished product is attached to the wall. A hose is inserted into it.
This type of equipment is great for dousing. cold water. It is very convenient and practical. If you do everything carefully, the font will also decorate your bathhouse.
What does a bath font look like (video)
Bath tubs are great option, which is almost as practical as a swimming pool. Therefore, you should take a closer look at this idea!
Everyone loves to give out advice, we are a country of advice and we are no exception. It is important that these tips help. We pass on our many years of experience in construction.
1. In the construction of the working part of Chan Bani contact the vat manufacturer, he will be the one who can give you Better conditions and cost the product itself - a cast iron vat for a bath, it is precisely this that is the most expensive of materials.
2. Always design and calculate the quantity of materials so as not to overpay for quantity. Order a service from a company that can solve a complex of turnkey construction activities. This will save your time (which is expensive) and nerves (you will sleep peacefully).
3. Order a set of all the materials and bring them from one company, only in this case you will receive comprehensive guarantee on the product. The working part of Chan Bani is like the heart of a car, the most important detail in contact with fire, it is the stove and chimney that must be properly made.
4. Choose a company with the maximum for a long time warranty or the number of oven cycles. This will add confidence in the future.
5. The Contractor company must have an office. This gives you the opportunity to contact it again, recommend it to your comrades, friends, and maintain your warranty on the performance of the Product (in this case, they will always help you resolve issues).
6. You work only with trusted companies that have at least 3-5 customer reviews. Recommendations from clients are very important today.
7. Cohesive and professional the team has its own tools, machines and license for installation work , can work by bank transfer, again for guarantee.
8. Always enter into an agreement and include all the necessary and important conditions cooperation and warranty obligations.
9. Look for the best ratio of price, quality, deadline. Do not strive for cheapness if you are building for yourself and remember the wise words: “The greedy pays twice”
Correctly calculate the chimney and brick base for installing the vat
Select the correct location for installing the cast iron vat. The Carpathian vat is always installed near a pond. By the way, this is good business! He'll kill himself in a season. The average market price is 210,000 rubles per vat. We sell them for 164,000 rubles.
A cast-iron refining vat is a free-standing or attached to a bathhouse or gazebo structure in the open air or a canopy (as you like) - it is a round stove on which a large cast-iron cauldron (bowl, font, vat) is installed. The most common shapes are hemisphere or truncated hemisphere. The vat is located directly above the fire, which looks very unusual and fabulous. Handsome and unusual design This design with a vat is so attractive that it will look stylish and original, no matter where it stands. A bath in a vat can be an excellent addition to a Russian classic bath or Finnish sauna and you can swim in it all year round; in winter it’s even more pleasant... Just imagine, you’re lying in a vat, there’s fresh air around, stars in the sky, snow all around... And you feel good, warm, smelling of summer herbs...
Why is he a rejuvenating vat? And what is its usefulness? The human body is 65% water, and therefore, when you bathe in a vat, every cell of the body warms up deeply and evenly. The water in the vat is heated to 42-45 degrees. The temperature is adjusted by adding cold water. When many people see this design, they fear that the bottom of the vat will burn some parts of the body... However, this is excluded, because the walls of the vat are 3-4 cm thick and flat river stones are placed on the bottom. The bathing procedure takes on average 1.5-2 hours. Typically, such vats are installed on the shore of a reservoir, because after sitting in the vat for about 15 minutes, it is recommended to plunge into cool water, and then back into the vat. Thanks to this contrast, you get the feeling that your whole body is pierced by many small needles... And so on several times. They say that taking 10 such procedures eliminates colds for at least 1 year. Also, bathing in such a vat relieves rheumatism, radiculitis and osteochondrosis. And for lovely women, this is an amazing opportunity to get rid of extra pounds and cellulite and find a beautiful body.
