Approaching summer season, which means that soon we will have useful physical work on the site and, of course, a pleasant rest. Quality rest is no less important than active physical work.
Everyone relaxes in their own way, but you are unlikely to refuse to lie down on a comfortable sun lounger and dream or take a nap in the cool shade of the trees.
The demand for garden furniture is growing every year, and manufacturers are rushing to satisfy customer desires by offering various options of this product.
Sun loungers and deck chairs are one of the types garden furniture, which are in special demand and popularity, differing only in type, price, quality and material of manufacture.
Sun lounger or deck chair?
Let's see how these models differ from each other.
Chaise lounge – this is a light garden chair with an elongated seat, translated from French as a long chair, designed for reclining rest. The height of the back of a chaise lounge is practically no different from the back of a regular chair, but usually has several positions (levels) of arrangement; models are often equipped with armrests.
Sun lounger – a “portable bed”, lower and wider than a chaise longue, designed for resting lying down or reclining, since the headboard is adjustable in height and can be reclined completely to allow the resting body to take a horizontal position.
Cottage bed made of wood
As you know, wood is the most environmentally friendly and safe material for human health, with high aesthetic qualities and a pleasant aroma. A wooden chaise longue or deck chair is not only comfortable for relaxing, but also, of course, is a decoration for any garden.
There are wooden sun loungers of various designs on sale: from ordinary reclining chairs to comfortable models that follow the anatomical curves of the human body.
The back of the lounger is usually fixed in several positions, so you can always take a comfortable position for sleeping or reading. Due to the massive structure wooden models They are additionally equipped with a pair of wheels, with the help of which they can easily move from place to place.
In addition to the sun loungers, you can purchase or sew yourself a soft textile mattress, the rest of which will be especially comfortable. The mattress is attached to the lounger using ties, Velcro or elastic bands.
Chaise lounge made of plastic
A plastic sun lounger is a budget option; these are often found on vacation; in hotels they are placed around pools. Attractive plastic models low price compared to others, they are easy to care for, they are quite mobile, and are not afraid of water.
However, there are very interesting and by no means cheap designer models.
Swings and rocking chairs
Chaise lounge swing Provides comfortable rest with easy rocking. The design of the chaise lounge is suspended on a stable, often metal, support stand and swings freely in the air.
A visor or umbrella is usually attached to the top for protection from the scorching sun.
An international version of a chaise lounge, reminiscent of a rocking chair. Instead of stable legs, the structure is equipped with rounded supports - two metal hoops. This model folds and moves easily.
Wicker sun loungers and chaise lounges
Wicker furniture is an indispensable attribute of a Mediterranean-style garden. It is made from various materials: natural rattan, wicker, hemp or synthetic fibers.
This furniture belongs to the premium class, its price is much higher. Rattan sun loungers are distinguished by their rich natural colors, beauty, grace and style.
DIY chaise longue and deck chair
If you can’t afford factory-made or designer furniture, then you can act as a designer and craftsman in the manufacture of garden furniture for relaxation by building a chaise longue or deck chair with your own hands. After all, there is so much around us natural material, which, if used correctly, can become comfortable and beautiful furniture.
Ordinary logs will turn into an original lounge chair if you attach them to curved metal arches.
And these sunbeds are made from ordinary wooden pallets. Two pallets at the base are fastened together, and the back is made from the third. You just need to sand the surfaces a little and paint them in the desired color.
This model is made of wooden blocks and planks, pre-polished. To make it, it is enough to arm yourself with a hammer and nails, or a screwdriver and wood screws. The size of the lounger can be selected individually to suit your height.
Lounger made from corrugated cardboard. Original, simple, cheap. But you need to remember that this model is afraid of moisture. However, on a sunny day it will perform its functions perfectly.
Quite easy to make, you can make a folding chaise longue from wooden slats with a textile seat yourself. The backrest is fixed in several positions.
The diagram shows the dimensions, quantity structural elements and assembly order.
The sun lounger can be made from sheets of plywood with a thickness of at least 20 mm. Two identical blanks are connected to each other by dowels (transverse strips with a diameter of 25-30 mm). To do this, you will need additional tools such as a jigsaw and a sander.
To transfer the design onto a sheet of plywood you will need a template. It can be made from thick cardboard, fiberboard sheet or from paper. Next, using a jigsaw (preferably a jigsaw), we cut out the blanks. Under connecting elements We make holes and assemble the structure using glue and screws.
After the glue has dried, we attach the horizontal slats of the chaise lounge to the rigid structure with screws. It is advisable to recess the screw heads and then seal them with putty. Parts must be sanded before assembly begins. Subsequently, the chaise lounge can be painted, dried, the canopy canopy can be pulled up and a removable textile mattress can be placed on the slats.
Of course, one of the main criteria when choosing a model of a sun lounger or chaise lounge is its cost. How simpler model, the cheaper. The second (and often the first) criterion is convenience, the third is beauty. A chaise lounge made by yourself may well meet all three criteria: minimal costs, sufficient comfort and originality. Let your holiday at your dacha bring you pleasure. Make it as comfortable as possible.
Sun loungers are used in the country, suburban area, beach and other recreation areas. You can make a lounger with your own hands from various materials. The product will be unique and convenient, but for this it is worth choosing the material and technology.
Chaise lounge design
The compact chaise lounge is a light and simple bed that can be moved from place to place. The design assumes a slightly raised headboard, and the word “chaise lounge” is translated as “long chair.” This designation accurately characterizes the elongated seat that distinguishes the chaise longue. Furniture can also be folding or transformable, but a common option is a low chair-lounge with a raised back.
Kinds
The main parameter depending on which sun loungers are classified is the material. Wooden models that are easy to make yourself are in demand. Furniture can be simple, straight in shape, and bases that follow the contours of the body are very comfortable. Easy fixation of the backrest position, retractable shelves, comfortable armrests and stable legs make wooden chaise lounges comfortable and practical. The presence of wheels makes it easier to transport furniture. At the same time, wooden models are environmentally friendly, safe and durable.
Plastic models are distinguished by their affordable price, easy maintenance during use, convenience and versatility. The furniture is lightweight and the design options are varied. Simple sunbeds are affordable and optimal for a summer residence. Original designer models have a higher price and good characteristics.
Wicker sun loungers have metal carcass, on which a woven fabric is stretched. The frame may also have a fabric base. Similar models They often have a folding design and are characterized by mobility and convenience. To create wicker models, natural or synthetic wicker and rattan are used. In models with a fabric base, durable and high-quality fabric is used.
Depending on the type of construction, sun loungers are classified into several types. The hanging option is in demand. It includes posts and base. An umbrella can complement the set, but in any case the seating area is suspended from the posts. Therefore, the supporting elements must be as reliable as possible and are often made of metal.
Folding models are made from various materials: wood, plastic, wicker, metal with a fabric base. The products are convenient because they are easy to fold and transport. This allows you to remove furniture in bad weather, as well as conveniently store the chaise longue. All rotary mechanisms designs are reliable and safe.
The lounge chair is convenient because it allows you to sit as comfortably as possible, but without being in a “lying” position. The seat can be transformed, lengthening or shortening if necessary. The chairs can be folding or regular. The furniture is comfortable both inside the living space and in the country house or near the pool.
Photo gallery: options
Comfortable sun loungers are varied and differ in appearance, which plays important role when choosing. Photos of furniture allow you to determine the desired option.
The original base makes the chaise lounge unusual and stylish. The chaise longue-ottoman is best installed indoors. Hanging models have an unusual appearance. The chaise lounge-ottoman is optimal near the pool. The rocking chair provides comfort. The double curved chaise lounge is comfortable, but takes up a lot of space. Hanging options reliable
Scheme and dimensions
When creating, you can make a standard size lounger, which is 60x190 cm. Individual parameters are determined depending on the weight and dimensions of the user. After determining the size of the product, you need to develop a design drawing, taking into account the type of product. For example, wooden chaise lounge It’s easy to do it yourself, and the drawing includes images of all elements indicating the dimensions, as well as holes for their fastening.
The drawing of a product made from other materials is carried out according to the same principle, that is, taking into account the parameters of each part. In this case, it is worth paying attention to the design of the supporting elements, which should be as reliable as possible. For example, for a chaise lounge made of round or profile pipes The diameter of the pipes should be indicated on the diagram. Each fastener and hole, moving mechanisms are also reflected in the drawing.
Suitable material
You can make a chaise lounge not only from new material, but also from available materials. The table shows popular material options and also reflects their advantages and disadvantages.
| Material | pros | Minuses | Features of use |
| Wooden pallets | Ease of use, affordable price, simple processing and operation, reliability designs | The need to choose the right size pallets, the fragility of poorly processed products, you can’t leave a deck chair outside in bad weather | Needed for work small pallets same size which should be sanded and painted. |
| Folding bed frame | Simple installation, easy transportation, compactness and easy assembly | You need to choose a frame of a suitable size and durable fabric; the product cannot be left outside in the rain or scorching sun | The finished folding bed frame is covered with durable fabric; if necessary, the frame can be remade. |
| Wooden boards | Environmental friendliness and durability, easy installation, the ability to create various designs and their upholstery with any materials | Careful wood treatment is required; the chaise longue should not be stored outdoors | According to the drawing, boards and blocks are cut and connected in the right places. The product needs to be sanded and painted |
| Bent pipes | Reliability and durability of the design, the ability to create a sun lounger of any shape, practicality and resistance to various influences | To create a lounger you need a pipe bending machine, it is important to follow the drawing parameters, metal processing is required | Round pipes are cut to size, treated with an anti-corrosion compound, bent and fastened according to the drawing |
| Metal | Durability and practicality, reliability and easy assembly, the ability to create various designs | Careful processing is required, it is important to select the optimal metal elements | Parts are cut from profile, round pipes, strips, which are treated with an anti-corrosion compound and fastened according to the drawing |
Principles of material selection
Wooden boards and bars serve as a good base for a sun lounger. For work, you should select dry elements, without holes and knots, without rotten areas. The comfort and durability of a sun lounger depends on the quality of the material. It is also important to take into account the parameters of the furniture, that is, the thickness and length of each part. Cutting large boards can be done either manually or using carpentry equipment.
An original solution is a chaise longue made of polyurethane or plastic pipes, which are used in organizing water supply. For furniture, elements with an outer diameter of 25 mm or more are best suited. This will allow you to make a reliable lounger. To connect pipes, a special soldering apparatus and various angles and adapters are used.
Metal round pipes are distinguished by complex processing. To create a sun lounger, they need to be bent very carefully, and the elements are connected with bolts. The diameter of the pipes must be at least 20–25 mm. For aluminum parts this figure increases.
When choosing any material, it is important to pay attention to its quality. Surface defects, heterogeneous structure, dents indicate low quality. Such material will not allow you to easily make a chaise longue for your summer house with your own hands. Therefore, boards or pipes must be new, smooth and reliable.
Determining the amount of material
The amount of material required for work is calculated depending on the size of the furniture. Therefore, you first need to make a drawing that shows all the components of the structure and indicates their dimensions. It is important to take into account the thickness or diameter of the elements. For example, to create a chaise lounge from wood, you should take bars and boards with a reserve, since during the work you may need additional material. Self-tapping screws, rotating mechanisms and other types of fastening should be selected with a small margin.
Tools
To make a wooden chaise longue you need simple tools, which even a novice master can use. These are the following:
- sheets or sandpaper for sanding wooden surfaces;
- tape measure and building level;
- large and medium sized screws;
- screwdriver, jigsaw;
- brush, varnish or paint.
In the process of work, they use a wooden laminated board and bars, drills of different thicknesses, several roller mechanisms, and metal corners. The bars should be sawn in advance according to the drawing, which will significantly speed up the process of assembling the sun lounger.
DIY chaise lounge made of wood: photos, drawings and progress of work
Before starting work, you need to prepare a drawing, tools and materials, and cut the bars. The procedure is as follows:
- The prepared beams are fastened according to the drawing, but holes for screws must first be made in them. The beams are connected to each other using metal corners, which are used when assembling beds. Then the bars for the legs are prepared, the height of which is often 5–10 cm. The legs are fixed at a short distance from the edges of the frame, and this requires long screws;
- A roller is attached to each leg, and for this, screws up to 5 cm long are used. After preparing the frame, planks should be made. To do this, cut thin planks with a jigsaw, the size of which is 8x60 cm. Next, the planks need to be screwed to the frame, creating a lattice. The distance between the slats must be at least 1 cm;
- You need to connect the elements of the sun lounger using rollers. Next, the structure is treated with antifungal compounds and covered with varnish or paint;
- The result is a folding, comfortable chaise lounge. The furniture is optimal for giving or relaxing, as it is practical to use and compact to store.
Chaise lounge finishing
A wooden lounger or folding chaise lounge does not require special finishing, but sanding and varnishing are required. This is due to the fact that wood of any species easily absorbs moisture and dirt. This leads to loss appearance furniture. For grinding wooden furniture Use medium or fine sandpaper. The surfaces and corners of the bars are processed manually in a circular motion. Next, the furniture is coated with a wood protectant, and after it dries, paint or varnish is applied with a brush.
A simple chaise lounge made of wood. How to make a sun lounger with your own hands, photos, diagrams, drawings of a sun lounger, video.
A chaise longue is an indispensable attribute of garden furniture for summer holiday on the bank of a river or in the country. You can make it yourself; in this article we will look at the process of making a simple and practical folding sun lounger.
The design is quite simple; making a folding chair or chaise longue is not difficult.
How to make a sun lounger: drawings.
The picture shows a drawing of a folding chaise longue; if necessary, the dimensions can be changed slightly.
1 – rail 20 x 50 x 1300 mm – 2 pcs.
2 – rail 20 x 50 x 1930 mm – 2 pcs.
3 – rail 20 x 50 x 590 mm – 2 pcs.
4 – rail 20 x 50 x 580 mm – 1 pc.
5 – rail 20 x 40 x 520 mm – 2 pcs.
6 – rail 20 x 40 x 560 mm – 2 pcs.
7 – fabric 530 x 1400 mm – 1 pc.
8 – screw M8 x 50 – 4 pcs.
9 – screws 6 x 45 – 2 pcs., and 6 x 60 – 8 pcs.
Scheme of a folding chaise lounge.
How to make a sun lounger: materials and tools.
To make a sun lounger you will need wood from hard rock wood: - birch, oak, yew, walnut, ash, beech, pear, elm or white acacia.
Hard wood is more difficult to process, but the chaise longue will be durable and will last you for quite a long time.
You will also need wood glue to attach the groove joints.
Tools you will need:
- Wood saw.
- Drill with drills.
- Chisel.
- Hammer.
- Sandpaper.
- Screwdrivers.
How to make a sun lounger.
We saw off the slats required length According to the drawings, it is advisable to round the edges of the slats. We sand the slats with sandpaper.
The figure shows frames “A” and “B” and the backrest tilt adjuster “B”.
We assemble the frames. We fasten the slats together with groove joints using wood glue; the joints must be strong and not wobble.
On frame “B” we cut out grooves to adjust the tilt of the back of the chaise lounge.
We drill holes for fastenings; the diameter of the holes for bolts is 8 mm.
We connect frames “A” and “B” with screws through the holes, then we connect frame B.
We assemble the frame.
We try on the fabric, stretch it, wrap it on the crossbars and stitch it by hand or with a sewing machine.
The chaise lounge chair is ready!
Making a sun lounger video.
Main advantages
In terms of their functional purpose, chaise lounges are the same chairs, but more stable and with a low seat. You can relax in them in a semi-lying position, which allows you to relax your spine and all muscle groups as much as possible.
The undeniable advantage of sun loungers is their comfortable shape. The garden chair can be folded in such a way that it can be used for sitting or lying down, depending on the person’s personal preferences.
Traditionally, deck chairs for summer cottages are made of wood, because since ancient times it has been considered the most environmentally friendly, economical and easy-to-use material.
Sun loungers are ideal for observing nature as they are light weight and very comfortable. Therefore, it is not surprising that many owners install them in their gardens or dachas. Such furniture can stand outdoors throughout the summer, and in the winter it can be removed at some point. suitable premises, for example, a storage room.
Most often, garden beds are made from materials such as:
- tree;
- plastic;
- rattan.
If you don't want to waste time and effort on self-assembly garden lounger, you can always order it from a furniture showroom.
Types of structures
If you have finally decided to start making a sun lounger for yourself, then first it won’t hurt you to get acquainted with the main types of sun loungers for your dacha. There are quite a lot of them, so only the most popular ones will be discussed below:
These are just some of the sun loungers that you can purchase for your summer cottage. If you wish, you can make your own chaise lounge in the form of a swing, and also using ordinary tree branches as material. It all depends on your preferences.
Making a wooden sun lounger
First, you need to prepare a certain set of materials and tools that you will need to make a homemade sun lounger:
- self-tapping screws;
- jigsaw and screwdriver;
- boards for covering the frame, 2.5 cm wide;
- timber 40x40 mm for the frame;
- corners for fastening boards (4 pcs.); wooden slabs 20 mm thick.
When going to the store to buy boards and slabs, we advise you to choose material made from softwood. He tolerates it much better Negative influence precipitation and has a wonderful aroma.
Stages of work
Now that you have everything you need prepared, you can proceed to assembling the wooden lounger.
You should first decide on the size garden chair. You can use a ready-made drawing or create it yourself. Typically standard sun loungers measure 60 x 200 cm.
Now you can start making the frame. For it you will need bars, from which you need to make four sidewalls - two of them should be 200 cm long, and two more should be 60 cm long. The finished sidewalls must be subsequently connected to each other using fastening corners.
On the outside, the frame must be sheathed with a board 2.5 cm wide.
We take the long sidewalls and attach 4 legs to them, having first stepped back 8 cm from the edge. The legs can be made from beams 10 cm long. We use self-tapping screws to attach them to the frame.
Having finished making the frame, we begin to assemble the lattice. For it we need wooden slabs, from which we need to cut boards measuring 60 x 10 cm using a jigsaw.
We attach the boards to the chaise lounge frame using self-tapping screws. Be sure to leave a gap of about 1.5 cm between the boards. Then the lattice of the sun lounger will look neat and beautiful.
If desired, you can make a chaise lounge with an adjustable back. In this case, the lattice must be divided into two parts. One of them will serve as a lounger, and the other as a headboard. We mount both parts to the connecting boards. To securely connect elements, it is best to use door hinges.
So that the headboard can be fixed in a certain position, the frame design with inside a crossbar should be added. You need to attach a support post for the headboard to it using self-tapping screws. If you don’t have one, you can buy it at any hardware store.
Now that your homemade summer cottage is ready, all that remains is to sand the boards, cover them with drying oil or special paint and varnish material for protection against moisture.
Making a fabric lounger
If for some reason a wooden folding lounge chair is not suitable for you, then you can try making a fabric lounge chair instead.
Materials and tools
To make a sun lounger from fabric material you will need the following:
- bolts with nuts 8 mm;
- a piece of durable fabric 200x60 cm;
- round slats 2 cm thick (one strip 700 mm long, two 650 and two 550 mm);
- rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 mm long and two 600 mm long);
- sandpaper.
To make a frame lounger, it is best to use tarpaulin, camouflage or denim fabric. They have sufficient strength and are resistant to wear.
Action algorithm
Now you can proceed directly to assembling the fabric lounger.
As you can see above, making a chaise lounge for a summer house from fabric is no more difficult than a similar lounge chair made from wood.
Buying a garden chair
Perhaps some summer residents will not want to spend time and money making a sun lounger with their own hands. In this case, you can go to the store and buy a ready-made garden lounger. The furniture showroom will offer you a variety of such products to choose from. Surely among them you will find how budget options, as well as unusual designs of designer models of sun loungers for the street.
After studying the proposed options and comparing their characteristics, all you have to do is decide on the amount you are willing to pay for a sun lounger. The cost of such sun loungers depends on the size and material of manufacture:
- wooden sun loungers will cost you between 6,000-15,000 rubles;
- for plastic sun loungers you will have to pay from 1500 to 9000 rubles;
- Folding frame sun loungers, which can be purchased for RUB 1,350-9,500, won’t hurt your pocket too much.
When traveling to the countryside, many are warmed by the thought that they will have the opportunity to lie in the fresh air for at least a few minutes and enjoy the surrounding nature. But everyone has the power to make their vacation more enjoyable if they prepare a place for it in advance. To do this, you must have special furniture like a chaise lounge.
The easiest way is to buy such a sun lounger at the nearest furniture store, although some owners often make their own sun loungers and thereby save a lot. You can do the same, especially since you don’t need to have special skills and knowledge to do this. Even the most ordinary wooden deck chair for a summer cottage can be made from a material that is likely to be found in any household.
But in any case, you will have to prepare for this work, because without drawings you are unlikely to be able to make exactly the chaise longue that you want, especially if you do not have the slightest experience in this matter.
A homemade chaise longue for a summer house is much preferable to a store-bought lounge chair, because you can decide for yourself how it should turn out, and upon completion of the work, decorate it at your discretion. Of course, this will require some effort on your part, but in the end all this will be compensated by the comfort that your homemade chaise lounge will provide you with.
DIY chaise longue
The summer season is approaching and it's time to think about creating a chaise lounge with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.
Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.
DIY chaise longue
Sun loungers are widely used on beaches and by pools. On personal plots, dachas.
Sun loungers are made from various materials:
- wood;
- plastic;
- aluminum;
- rattan;
- PVC pipes;
- durable fabric.
Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.
Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.
Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.
Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.
In this article we will tell you how to create wooden sun loungers with your own hands.
Monolithic chaise lounge made of wood
Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. Further instructions will help you make a chaise lounge on wheels with your own hands.
You will need tools:
- electric jigsaw or hacksaw;
- drill;
- screwdriver;
- self-tapping screws;
- fine grain sandpaper;
- spirit level;
- roulette.
When choosing a tree, pay attention to conifers. They are sold at affordable prices and are characterized by increased water resistance.
Materials needed for a sun lounger:
- glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
- boards 0.25 cm thick.
- wooden beam with a square section of 50x50 mm;
- 4 wheels with a diameter of 10cm;
- corners for strengthening the bed;
- door hinges;
- varnish or paint.
We suggest you make a chaise lounge according to this pattern.
Legend:
- Front legs.
- Hind legs.
- Bearing longitudinal.
- Back support.
- Back support.
- Bearing transverse.
- Fixing bar.
- Backrest support.
- Wheels.
- End beam.
- Back slats.
- Seat slats.
- The support beam is transverse.
- Fixing bar.
You can independently determine the size of the desired sun lounger and make calculations. Or use standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.
Assembling a chaise lounge on wheels
We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.
We sheathe the resulting frame with pre-prepared and sanded boards.
We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.
We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.
We screw the wheels to the center of the legs with bolts with a diameter of 30mm.
Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.
Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.
We should have two parts. The smaller one is intended for the headboard. Connecting both grids door hinges. We install a support bar under the opening part.
All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.
For more comfortable rest You can sew additional mattresses that fit the size of the bed.
Simple sun lounger
To create a wooden chaise lounge with your own hands, you need following materials, as well as tools:
- tape measure and square;
- pencil;
- saw;
- electric drill;
- screwdriver or screwdriver;
- screws, self-tapping screws and studs for fixation;
- sandpaper or grinder;
- wood putty;
- dye.
Wooden beams used in the work:
- for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
- 2 longitudinal bars for a frame 215 cm long;
- 2 cross beams -50 cm;
- 6 legs -35 cm;
- 13 slats for a seat measuring 2.5 x 8 x 60 cm;
- 6 slats for the back - 2.5? 8? 88 cm.
The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.
Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.
We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you
We make the back from 2 boards measuring 88 cm and 3 - 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.
We securely fasten the longitudinal strips. We round them for a more beautiful look.
Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.
We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.
A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.
Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.
>Video DIY garden lounger
Fabric chaise lounge
A chair with a frame complemented with fabric is one of the most comfortable, budget types of chaise lounges. It is convenient to fold and easy to carry. Can be stored in flat view. It takes up little space.
To create a sun lounger with your own hands you will need:
- bolts, nuts with a diameter of 8 cm;
- small nails with round heads;
- round sticks (1 piece -65cm, 2 pieces - 50cm, 2 pieces -60cm);
- rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
- needle file, fine-grain sandpaper;
- glue;
- durable material measuring 200 by 50 cm.
Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:
- birch;
- oak;
- beech.
Choose fabrics with maximum strength. Great fit:
- teak for mattresses;
- tarpaulin;
- canvas;
- camouflage;
- denim
These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:
- A.1200x600 mm.
- B.1100x550 mm.
- H.650x620 mm.
Cut the boards to the required length. We sand with sandpaper.
IN longitudinal bars We make indentations of 70 and 40 cm, drill holes with a diameter of 8 mm, like the bolts. Sand with a round file.
We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.
According to the diagram, we drill holes in the bars to connect the parts.
Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.
Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.
We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.
ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.
DIY fabric chaise lounge. Model 2
For this chair you will need:
- wooden slats size 2x4 cm. Two slats length 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
- slats measuring 2x6 cm. One each 61 and 57 cm;
- 65cm wooden rod with a diameter of 1.2cm;
- a piece of fabric 137 cm long and 116 cm wide;
- bolts, washers, nuts, screws;
- glue;
- round needle file, sandpaper or grinder;
- electric drill.
Manufacturing process:
Process all the details of the future chair in advance. Sand them using a machine or fine-grit sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.
Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.
Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.
On the seat frame, step back 43cm from the top. Make holes.
On the piece supporting the back, drill holes in the center of the edges.
Process all holes with a round file.
Model installation
First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.
Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.
ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.
Install the back support piece using washers and bolts.
Sand away all imperfections. If desired, varnish or paint.
Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.
Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.
Chaise lounge made of polyvinyl chloride
Another example of a lounger with a fabric base. Only in this case, wooden slats are replaced with PVC pipes. Chair sizes may vary.
In this do-it-yourself chaise lounge model we used:
- 2-inch polyvinyl chloride pipes;
- L-shaped connectors – 8 pieces;
- T-shaped connectors – 6 pieces.
First, connect 30cm and 45cm long PVC pipes for the vertical strip using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.
Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.
Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.
Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.
Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.
You did everything right if you get a rectangle within a rectangle.
The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.
Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.
Portable lounge chair
The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.
The collapsible chair consists of 2 parts:
- backrest covered with dense, wear-resistant fabric;
- wooden seat.
In addition to tools, the following materials are used:
- 2 legs for the backrest measuring 20x40x800mm;
- 2 legs for the seat - 20x40x560mm;
- 2 lower crossbars - 10x50x380mm;
- 1 top bar- 10x40x380mm;
- 1 seat crossbar - 20x40x300mm;
- 5 slats - 20x40x400mm;
- piece of material - 600x500mm.
The procedure for assembling a portable sun lounger is shown in the diagram.
First, the parts are connected using self-tapping screws and a screwdriver.
The workpiece is processed and varnished.
While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.
We connect the back and seat of the chaise lounge.
Enjoying your holiday in your new armchair.
Pay attention to another interesting chaise lounge model in the video.
Original chaise lounge
Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.
To create a lounger you will need the following materials. And also tools:
- 2 sheets of plywood 2cm thick with a size of 160x180cm;
- 6 round strips with a diameter of 30mm and a length of 92cm;
- 12 planks made from leftover plywood measuring 94x10cm;
- dense fabric with a width of 92 cm;
- construction adhesive;
- screws;
- roulette;
- cardboard for layout;
- Circular Saw;
- electric drill.
Let's start creating a sun lounger.
Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.
We transfer the drawing onto sheets of plywood and cut out the side parts of the disk or band saw. At the junction with round beam cut out recesses with a diameter of 30mm.
We sand all the unevenness and cutting defects.
We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.
Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.
We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.
We sand the product again. Now we hide the assembly flaws.
Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.
You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.
ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.
The summer season is approaching and it's time to think about creating a chaise lounge with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.
Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.
Sun loungers are widely used on beaches and by pools. On personal plots, dachas.
Sun loungers are made from various materials:
- wood;
- plastic;
- aluminum;
- rattan;
- PVC pipes;
- durable fabric.
Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.
Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.
Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.
Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.
In this article we will tell you how to create wooden sun loungers with your own hands.
To ensure the longevity of the effort expended, the materials used must be processed.
Antiseptics and special impregnations will help protect wood from moisture, harmful insects, rot, and mold. It is better to carry out processing before assembling the structure.
After installing the sunbed, the wooden parts should be coated with primer, drying oil, varnish or paint. This will extend the life of your masterpiece.
Fabrics should also be protected from rain and sun. Water-repellent impregnations will help preserve their brightness and service. Their effect lasts 2-4 weeks.
And, of course, remember the famous Russian proverb when working. Measure seven times, cut once.
Monolithic chaise lounge made of wood
Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. The following instructions will help you make a chaise lounge on wheels with your own hands.
You will need tools:
- electric jigsaw or hacksaw;
- drill;
- screwdriver;
- self-tapping screws;
- fine grain sandpaper;
- spirit level;
- roulette.
When choosing a tree, pay attention to coniferous species. They are sold at affordable prices and are characterized by increased water resistance.
Materials needed for a sun lounger:
- glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
- boards 0.25 cm thick.
- wooden beam with a square section of 50x50 mm;
- 4 wheels with a diameter of 10cm;
- corners for strengthening the bed;
- door hinges;
- varnish or paint.
We suggest you make a chaise lounge according to this pattern.
Legend:
- Front legs.
- Hind legs.
- Bearing longitudinal.
- Back support.
- Back support.
- Bearing transverse.
- Fixing bar.
- Backrest support.
- Wheels.
- End beam.
- Back slats.
- Seat slats.
- The support beam is transverse.
- Fixing bar.
You can independently determine the size of the desired sun lounger and make calculations. Or use the standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.
Assembling a chaise lounge on wheels
We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.
We sheathe the resulting frame with pre-prepared and sanded boards.
We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.
We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.
We screw the wheels to the center of the legs with bolts with a diameter of 30mm.
Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.
Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.
We should have two parts. The smaller one is intended for the headboard. We connect both grilles with door hinges. We install a support bar under the opening part.
All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.
For a more comfortable stay, you can sew additional mattresses that fit the size of the bed.
Simple sun lounger
To create a wooden chaise lounge with your own hands, you need the following materials, as well as tools:
- tape measure and square;
- pencil;
- saw;
- electric drill;
- screwdriver or screwdriver;
- screws, self-tapping screws and studs for fixation;
- sandpaper or grinder;
- wood putty;
- dye.
Wooden beams used in the work:
- for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
- 2 longitudinal bars for a frame 215 cm long;
- 2 cross beams -50 cm;
- 6 legs -35 cm;
- 13 slats for a seat measuring 2.5 x 8 x 60 cm;
- 6 slats for the back - 2.5? 8? 88 cm.
The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.
Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.
We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you
We make the back from 2 boards measuring 88 cm and 3 boards measuring 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.
We securely fasten the longitudinal strips. We round them for a more beautiful look.
Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.
We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.
A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.
Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.
DIY garden lounger video
Fabric chaise lounge
A chair with a frame complemented with fabric is one of the most comfortable, budget types of chaise lounges. It is convenient to fold and easy to carry. Can be stored flat. It takes up little space.
To create a sun lounger with your own hands you will need:
- bolts, nuts with a diameter of 8 cm;
- small nails with round heads;
- round sticks (1 piece -65cm, 2 pieces - 50cm, 2 pieces -60cm);
- rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
- needle file, fine-grain sandpaper;
- glue;
- durable material measuring 200 by 50 cm.
Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:
- birch;
- oak;
- beech.
Choose fabrics with maximum strength. Great fit:
- teak for mattresses;
- tarpaulin;
- canvas;
- camouflage;
- denim
These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:
- A.1200x600 mm.
- B.1100x550 mm.
- H.650x620 mm.
Cut the boards to the required length. We sand with sandpaper.
In the longitudinal bars we make indents of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Sand with a round file.
We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.
According to the diagram, we drill holes in the bars to connect the parts.
Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.
Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.
We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.
ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.
DIY fabric chaise lounge. Model 2
For this chair you will need:
- wooden slats measuring 2x4 cm. Two slats each with a length of 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
- slats measuring 2x6 cm. One each 61 and 57 cm;
- 65cm wooden rod with a diameter of 1.2cm;
- a piece of fabric 137 cm long and 116 cm wide;
- bolts, washers, nuts, screws;
- glue;
- round needle file, sandpaper or grinder;
- electric drill.
Manufacturing process:
Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.
Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.
Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.
On the seat frame, step back 43cm from the top. Make holes.
On the piece supporting the back, drill holes in the center of the edges.
Process all holes with a round file.
Model installation
First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.
Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.
ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.
Install the back support piece using washers and bolts.
Sand away all imperfections. If desired, varnish or paint.
Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.
Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.
Chaise lounge made of polyvinyl chloride
Another example of a lounger with a fabric base. Only in this case, wooden slats are replaced with PVC pipes. Chair sizes may vary.
In this do-it-yourself chaise lounge model we used:
- 2-inch polyvinyl chloride pipes;
- L-shaped connectors – 8 pieces;
- T-shaped connectors – 6 pieces.
First, connect 30cm and 45cm long PVC pipes for the vertical strip using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.
Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.
Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.
Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.
Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.
You did everything right if you get a rectangle within a rectangle.
The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.
Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.
Portable lounge chair
The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.
The collapsible chair consists of 2 parts:
- backrest covered with dense, wear-resistant fabric;
- wooden seat.
In addition to tools, the following materials are used:
- 2 legs for the backrest measuring 20x40x800mm;
- 2 legs for the seat - 20x40x560mm;
- 2 lower crossbars - 10x50x380mm;
- 1 top crossbar - 10x40x380mm;
- 1 seat crossbar - 20x40x300mm;
- 5 slats - 20x40x400mm;
- piece of material - 600x500mm.
The procedure for assembling a portable sun lounger is shown in the diagram.
First, the parts are connected using self-tapping screws and a screwdriver.
The workpiece is processed and varnished.
While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.
We connect the back and seat of the chaise lounge.
Enjoying your holiday in your new armchair.
Pay attention to another interesting chaise lounge model in the video.
Kentucky chair
You can make the original look of a chaise lounge with your own hands. A sun lounger is assembled from bars. Convenient, easy to fold. Takes up minimal storage space.
For the chair you will need:
- 4mm galvanized wire;
- 16 staples;
- bars 30x55 mm.
Before starting assembly, it is recommended to treat the bars to protect them from ultraviolet rays and moisture. Choose an oil- and wax-based stain. Beitz is good. You can use parquet oil. Apply the product using a spray bottle or brush.
Kentucky chair installation
Drill the holes. Their diameter should be slightly wider than the thickness of the galvanized wire. Sand all rough spots and imperfections.
Fold the parts according to the photo and start stringing the boards onto the wire.
Secure it with brackets.
ADVICE. Instead of wire, use galvanized studs. They are secured with nuts and washers.
Raise the planks. The Kentucky chair is ready for use.
Original chaise lounge
Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.
To create a lounger you will need the following materials. And also tools:
- 2 sheets of plywood 2cm thick with a size of 160x180cm;
- 6 round strips with a diameter of 30mm and a length of 92cm;
- 12 planks made from leftover plywood measuring 94x10cm;
- dense fabric with a width of 92 cm;
- construction adhesive;
- screws;
- roulette;
- cardboard for layout;
- Circular Saw;
- electric drill.
Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.
We transfer the drawing onto sheets of plywood and cut out the side parts with a circular or band saw. At the junction with the round beam, we cut out recesses with a diameter of 30mm.
We sand all the unevenness and cutting defects.
We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.
Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.
We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.
We sand the product again. Now we hide the assembly flaws.
Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.
You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.
ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.
Birch lounger
It must be said that our Russian craftsmen are distinguished by their ingenuity and creative approach. This chaise lounge is made by hand from birch logs. It is distinguished by Russian folk flavor. Perfect for garden plots.
The work uses:
- logs with a diameter of 75-120mm;
- drill and set of drills;
- electric saw;
- staples and screws;
- marker;
- electrical tape or chalk for drawing.
Let's start creating a sun lounger.
We saw the trunk into logs 45 cm long.
On the floor we draw a line for the future sunbed using chalk, or glue it with electrical tape.
We lay the logs according to the diagram. We drill holes with a drill and connect the logs using long self-tapping screws. We use a socket wrench for this.
Almost turning over ready product. We are testing. We eliminate shortcomings.
For greater stability, we fix the back side of the lounger with brackets.
A monolithic birch chaise lounge is ready to delight you and your guests.
Unusual do-it-yourself sunbed for a summer house
Pallet lounger
One of the most budget-friendly sun loungers is made by yourself with skillful hands from pallets. What it is? A pallet or pallet is a stand that is designed to transport cargo.
DIY pallet lounger video.
Now you have several options for making your own sun loungers. Choose a design that is convenient for you, or affordable. When choosing sizes, keep in mind that in addition to you, your wife and your children will also rest on the sunbed. Adjust the width and height to suit your overall needs.
It is very nice to relax in the fresh air after a hard day at work. To make your stay as comfortable as possible, you can place special sun loungers on the site - sun loungers.
They should be comfortable and fit well into the overall design of your garden. Currently, many retail chains and online stores offer a huge range of country sun loungers, but it’s much nicer to make them yourself.
In this article we will provide detailed guide on the construction of wooden and fabric sun loungers, we will tell you about ways to protect them from moisture and pests.
Types of sun loungers
Before you start making a sun lounger, you should consider the main types of country loungers. There are quite a lot of them, let’s focus on the most popular:
- Wooden sun loungers. Wood is one of the most environmentally friendly materials; it is absolutely safe for human health. On sale you can find wooden sun loungers of various shapes and designs: from reclining ones to full-fledged sun loungers that follow the curves of the human body. The disadvantages of such sun loungers are the rigidity of the material and the rather labor-intensive movement of the sun loungers around the site;
- Plastic sun loungers. If you choose this option for yourself, then it will be much easier to purchase a ready-made chaise lounge and, if desired, decorate it to your liking. The advantages of plastic sun loungers are relatively low cost, ease of care and mobility. Plastic is a fairly light material and, moreover, is not afraid of moisture;
- Sun loungers made from pallets. Pallets or pallets are stands designed for moving various loads. Most often, pallets are made from boards. You can make a fairly comfortable chaise lounge from used pallets;
- Fabric sun loungers. Loungers of this type are very convenient to store and move. The basis of a fabric chaise lounge is a folding wooden or metal frame with a seat sewn into it. The only disadvantage of such a chaise lounge is the fragility of the fabric.
Of course, these are not all types of sun loungers; there are also sun loungers in the form, models made from wicker branches, and even sun loungers for cats and dogs. The choice depends only on your preferences. Next, we will focus on the process of making a wooden and frame lounger.
Making a wooden sun lounger
Materials and tools
We will need the following materials and tools:
- wooden slabs, the thickness of which is 20 mm;
- timber 40x40 mm for the frame;
- boards for covering the frame, 2.5 cm wide;
- jigsaw and screwdriver;
- 4 corners for fastening boards;
- self-tapping screws
How to make a sun lounger out of wood
Let's consider the main stages of assembling a wooden lounger:
- When starting production, you need to decide on the dimensions of the future chaise lounge. For convenience, you can make a drawing of a sun lounger or find a ready-made one on the Internet. Most often, the design has a size of 60x200 cm;
- The next step will be making the frame. To do this, you need to make 4 sidewalls from the bars: 2 long, 200 cm long and two shorter - 60 cm, respectively. To fasten the sidewalls we will need mounting angles;
- The outer part of the frame is covered with a board, the width of which is 2.5 cm;
- We attach 4 legs to the long sidewalls, departing 8 cm from the edges of the structure. To make the legs, 10 cm long beams are used. They should be attached to the frame using self-tapping screws;
- When the frame is completely ready, we begin assembling the lattice - the main part of the lounger. From prepared wooden slabs use a jigsaw to cut boards 60x10 cm wide;
- The finished boards are attached with self-tapping screws to the chaise lounge frame. Do not forget to leave a distance between the boards of 1-2.5 cm so that the lattice of the lounger has a neat and aesthetic appearance;
- If you want to assemble a chaise lounge with an adjustable back, then the grille should be divided into two parts. One of them will act as a lounger, and the other as a headboard. We install both parts on the connecting boards. It is best to fasten the grille elements using door hinges;
- In order for the headboard to be fixed in a certain position, with inner edge frame is fixed cross bar. A support stand for the headboard is attached to it with self-tapping screws (it is better to purchase a ready-made stand at a hardware store).
The chaise longue is ready; you should sand all the boards and cover them with drying oil or a special coating to protect them from moisture.
Making a chaise lounge from fabric
Materials and tools
To build a frame chaise lounge from fabric material, you must have the following available:
- Rectangular boards 30x60 cm thick (two boards 1200 mm long, two 1000 mm long and two 600 mm long);
- Round slats 2 cm thick (one plank should have a length of 700 mm, two 650 and two 550 mm);
- A piece of strong fabric measuring 200x60 cm;
- Bolts and nuts 8 mm;
- Sandpaper
Stages of work
Let's consider the installation of a frame lounger in stages:
- In order for the chaise lounge to fold easily, three frames must be assembled from prepared and cut slats. Frame A is 120x65 cm, frame B is 100x60 cm and frame B is 70x60 cm. Holes should be made in the longitudinal slats at a distance of 75 and 45 cm. In frame B it is necessary to make 2-4 cutouts, at a distance of 6-10 cm, to adjust the angle of the lounger. Detailed diagram frame manufacturing is shown in the figure;
- To assemble the sun lounger frame, frames A and B should be fastened to each other using screws that are inserted into the drilled holes on the slats. Frames A and B are fastened in the same way;
- After making the frame, the seat of the future lounger is cut out and sewn. To determine the appropriate length of material, the fabric is applied to the lounger in the folded position. The fabric should be in a slightly stretched position, but there is no need to apply any effort;
- The edges of the material must be processed and hemmed to increase its wear resistance;
- We attach the fabric to the round slats, which are located on frames A and B. You need to wrap the slats in fabric and secure them with small nails. You can make loops on the prepared fabric and simply put them on the slats.
As you can see, a folding chaise longue is also quite easy to assemble yourself.
How to treat a finished sun lounger
To make the sun lounger last longer, you can use the following techniques material processing, both during production and during operation:
- Special impregnations and antiseptics for wood will help protect wooden sun loungers from the negative effects of the external environment (moisture, rot, harmful insects). Wood materials are best processed before installing the structure;
- Varnish, drying oil, paint. These coatings will also help extend the life of wooden sun loungers. It is best to coat the product with any of these products immediately after production;
- Water-repellent impregnations for fabrics. They will help increase the wear resistance of fabric products and preserve bright colors. The effectiveness of such impregnations lasts for 2-4 weeks.
Where to buy a ready-made sun lounger
Currently, there are no problems with purchasing ready-made sun loungers. You can find them in various furniture showrooms and online stores. There are both budget options and original designer models of outdoor sun loungers.
The cost will depend on the size and materials of manufacture:
- Prices for wooden sun loungers vary from 6,000 to 15,000 rubles;
- Plastic sun loungers will cost you less, from 1,500 to 9,000 rubles;
- Folding frame sun loungers are also not very expensive; they will cost you approximately 1350-9500 rubles.
To learn how to inexpensively make a wooden sun lounger with your own hands, watch this video.
