We make a search magnet. “Coffee trio”: do-it-yourself refrigerator magnets How to make do-it-yourself refrigerator magnets

It has long been a custom for travelers to bring magnets from their travels. Have you tried to create such a product yourself? In our article we offer you 7 ways to create exclusive magnets.

Method one: image

Material you will need:

• interesting drawings (pictures cut out from magazines);
• glue;
• magnets in the shape of a circle with a diameter of 1.25 to 1.75 cm;
• glass circles (must match the size of the magnets).

All you need to do is glue a picture to the magnet and a glass circle on it. Glass circles are sold in craft stores.

If a magnet is visible through the picture, it would be advisable to add another detail. Namely: prepare a mug the right size from white cardboard and glue it under the drawing.

Method two: they are alive

A DIY refrigerator magnet can be a living creature. To make this, you should prepare:

• magnet;
• hot glue gun;
• screwdriver
• cortical plugs;
• small plants;
• some land;

Manufacturing stages and features:

• Make a hole in the cork.
• In depth - up to the middle of the cork. It is important not to damage the edges.
• Using a glue gun, you need to glue the magnet to the cork.
• Immerse the soil in the resulting void and plant the plant.
• As a result, you got a kind of pot.

Don't forget to take care of the plant you planted. After all, it will grow up and ask to be moved to new house, and in the existing one you can grow a new flower.

Method three: magic clay

Making refrigerator magnets will not be difficult if you have the following materials at your disposal:

• magnets;
• polymer clay;
• ink;
• hot glue gun.

And these are the tools:

• Bakeware;
• rolling pin (or any other object that can be used to roll out clay);
• sandpaper (you can use a manicure file);
• stamps.

To make a souvenir, you need to roll out the clay to make a sheet approximately 5 millimeters thick. The pattern is applied to the material with stamps, and individual shapes must be cut out using clay molds.

Method four: magnet in a bag

If you're worried about scratches on your refrigerator, you can easily prevent them by making a fabric magnet. Simple technique manufacturing will allow you to change the so-called bag as soon as you like.

All you need for this little masterpiece is:

• magnets;
• colored rags;
• threads;
• needle;
• scissors.

First you need to create blanks for magnets from a flap. The size of the blanks should be approximately 3 times over size magnet. The edge of the fabric must be folded and stitched so that the stitches lie as close to each other as possible. As a result, you got a bag like this. Place a magnet inside, tighten the thread, tie it and cut it.

Between magnet and fabric with front side you can put a little cotton wool or foam rubber. Then the product will gain volume.

Method five: wood is always in fashion

Prepare your tools:

• wood saw;
• electric drill;
• drills for it;

The manufacturing technology is simple. It consists of the following steps:

• Saw the branch, thus creating “washers”, the thickness of which is approximately three centimeters.
• Sand the edges (if necessary)
• Drill a small hole about 3 cm deep in the middle of the washer.
• Glue a magnet into the hole.
• Drying time: from 6 to 8 hours.

If desired, you can decorate the pucks with a pattern or in another way.

Method six: oh, this is amazing Lego

To make a bright, colorful and functional souvenir, select your favorite parts from the construction set, prepare the required number of magnets and a hot glue gun.

The creation process is simple: you need to glue the part to a magnet. However, it is worth considering 2 important factors:

• DO NOT use magnetic tape. She is weak to hold the cube. Such a magnet will not last long.
• Hot melt glue can be replaced with super glue.

It should be said that this product must dry for at least 24 hours. Such a bright magnet can be used not only by adults, but also by children.

Method seven: they also chip

To create a magnet that will not only magnetize, but that can also be pinned, you need:

• magnetic tape;
• wooden clothespins;
• acrylic paint;
• thin brush;
• sparkles.

Now that you have everything ready, get to work. First, decorate the clothespin. Secondly, you can simply paint it. Thirdly, glue the tape on the other side. Everything ingenious is simple!

Photo of refrigerator magnets

The unique properties of some substances have always surprised people with their unusualness. Special attention I was attracted by the ability of some metals and stones to repel or attract each other. Throughout all eras, this has aroused the interest of sages and the great surprise of ordinary people.

Starting from the 12th – 13th centuries, it began to be actively used in the production of compasses and other innovative inventions. Today you can see the prevalence and variety of magnets in all areas of our lives. Every time we come across another product made from a magnet, we often ask the question: “So how are magnets made?”

Types of magnets

There are several types of magnets:

• Constant;
• Temporary;
• Electromagnet;

The difference between the first two magnets lies in their degree of magnetization and the time they hold the field inside themselves. Depending on the composition, the magnetic field will be weaker or stronger and more resistant to external fields. An electromagnet is not a true magnet, it is just the effect of electricity that creates a magnetic field around a metal core.

Interesting fact: for the first time, research on this substance was carried out by our domestic scientist Peter Peregrin. In 1269, he published the “Book of the Magnet,” which described the unique properties of matter and its interaction with the outside world.

What are magnets made of?

Iron, neodymium, boron, cobalt, samarium, alnico and ferrites are used to produce permanent and temporary magnets. They are crushed in several stages and melted, baked or pressed together until a permanent or temporary magnetic field. Depending on the type of magnets and the required characteristics, the composition and proportions of the components change.

Related materials:

How and from what is chewing gum made?

This production makes it possible to obtain three types of magnets:

• Pressed;
• Cast;
• Sintered;

Making magnets

Electromagnets are made by winding wire around a metal core. By changing the dimensions of the core and the length of the wire, the power of the field, the amount of electricity consumed and the dimensions of the device change.

Component Selection

Permanent and temporary magnets are produced with different field strengths and resistance to environmental influences. Before production begins, the customer determines the composition and shape of future products depending on the place of application and the high cost of production. All components are selected to the nearest gram and sent to the first stage of production.

Smelting

The operator loads all the components of the future magnet into an electric vacuum furnace. After checking the equipment and matching the amount of material, the furnace is closed. Using a pump, all air is pumped out of the chamber and the melting process is started. Air is removed from the chamber in order to prevent oxidation of iron and possible loss of field power. The molten mixture is poured into the mold on its own, and the operator waits for it to cool completely. The result is a briquette that already has magnetic properties.

You don't have to buy expensive accessories to decorate your home. Some little things will help enliven the interior, and they are very easy to do. For example, appearance your kitchen will change a lot thanks to... magnets on the refrigerator door.

Do DIY refrigerator magnet you can do it quickly enough, and you don’t need any special materials for this.

Master classes: DIY refrigerator magnet

Simple and bright DIY refrigerator magnet

What you will need:

• round magnets,
• glass or plastic circles of the same size,
• glue,
• interesting pictures (you can cut them out from magazines or draw them yourself).

Making such interesting magnets will be a breeze. You just need to glue the selected picture to the magnet, wait for the glue to dry, and glue the glass circle onto the picture.

Once the glue is completely dry, your magnet is ready.

DIY living plant fridge magnet

What you will need:

• magnets,
• wine bottle corks,
• glue gun,
• Earth,
• small plants,
• screwdriver.

To begin, you will need to make a small hole in the top of the cork using a screwdriver. Next, we expand this hole using a knife (very carefully, trying not to catch the walls of the cork).

Attach the cork to the magnet using a glue gun.

After this, you need to carefully pour soil into the resulting depressions and plant the plants. This way, magnets with live plants will appear on your refrigerator. Don't forget to water them regularly. As soon as the plants noticeably increase in size and no longer fit in the plugs, transplant them into pots. And in the traffic jams you will need to fill up other soil and plant new plants.

DIY “fabric” refrigerator magnet

What you will need:

• magnets,
• needle,
• pieces of fabric,
• threads in color.

Take a piece of fabric and cut a circle out of it, the diameter of which will be 3 times larger than the diameter of your magnet. Now you need to sew a “case” for the magnet. Fold the edge of the fabric piece and sew it. You need to put a magnet in the resulting “case” and carefully tighten the fabric with thread.

Tie a knot at the end of the thread and trim off the excess.

This magnet will look great on your refrigerator. A fabric “cover” will protect your refrigerator from scratches. And if you wish, you can change it without much difficulty.

Do-it-yourself refrigerator magnet trailer

What you will need:

• magnetic tape,
• acrylic paints,
• wooden clothespins,
• thin brush,
• glitter (optional).

Making such magnets is quite simple. You need to decorate the clothespins using paints and a brush (you can make the same design on all the clothespins or paint them with different colors). If you want your magnets to be bright and eye-catching, then use glitter. TO back side Each clothespin needs to be glued with magnetic tape.

Your clothespin magnets are ready. They will help you neatly capture photos or notes.

DIY polymer clay refrigerator magnet

What you will need:

• magnets,
• polymer clay,
• rolling pin (can be replaced with a glass jar),
• Bakeware,
• stamps,
• sandpaper,
• ink pad,
• glue gun

First you need to roll out the polymer clay using a rolling pin. You should have a layer of clay about 0.5 cm thick. Use stamps and apply various patterns to this layer in a chaotic manner (so that they do not overlap each other). If you have an ink pad, you can give your designs the color of your choice.

After this, using baking molds, cut out various blanks for future magnets from the clay layer.

Read the instructions written on the packaging with polymer clay. Depending on what is indicated there, leave the pieces to dry or bake them in the oven.

In most homes, you can see magnets on the front door of the refrigerator. Although some people manage to attach such decoration to any equipment. Fridge magnets are a beautiful decoration item. After their massive appearance, some began to collect these items. In stores and kiosks you can find a huge selection of such decorations, but if you try, you can make them yourself.

To create them you don’t need any special skills, the main thing is to have everything you need on hand. You also need to know what exactly will decorate the refrigerator or other equipment. Fridge magnets come in a variety of shapes and sizes, so which one should you choose?

Types of magnetic jewelry

Currently, magnet manufacturers offer wide choose magnets different sizes and shapes. Among the huge selection there is a wide variety, here are just some of the representatives. They can be found in any home.

1. Flat vinyl magnets. They are the cheapest and most popular. This type of product is very easy to create.
2. A combination of a magnet and a diary. A handy little thing for housewives that can be used as “reminders”. They are suitable not only for home, but also for office. They are convenient for writing down your to-do list for the day.
3. Magnetic calendar.
4. Frame. In this case, a family or other photo will be displayed on the refrigerator.
5. Volumetric magnets. They are popular on the eve of the New Year, when you can see the symbol of the coming year in the form of a figurine everywhere.
6. Photo magnets for your refrigerator are also popular. If desired, you can simply make them yourself.

DIY vinyl magnets

We live in an age of innovation that has come a long way. Gone are the days when creating magnets was expensive. New equipment allows you to quickly make any shape in a short time and without special costs.

Today, for these purposes, they use a material that is obtained by applying it to vinyl base thin layer of magnetic substance. It retains its properties for a long time, so such refrigerator magnets will delight your eyes for many years. The advantage of using vinyl to make magnets is its affordability. You can purchase such material not only in sheets, but also in rolls. After this you can start creating.

The production of original vinyl magnets does not require the purchase of expensive equipment, so this business is currently becoming popular. All that is required to start production is:

• computer;
• jet printer;
• cutter;
• parquet laminate.

Creating magnets does not take much time, it just requires performing actions in a certain order. Over time, production can be put on stream.

Stages of creating jewelry on a magnet

The manufacturing of small vinyl magnets consists of the following processes:

Production takes little time, so in a short period of time, you can get enough a large number of such products.

How to calculate income and expenses?

Any business requires preliminary calculations by production costs, so that you can estimate how quickly such activities will begin to make a profit. The table below will give you an idea of ​​what this will look like.

Like these ones simple calculations once again prove that making extraordinary refrigerator magnets is quite easy real way earn money, and in a fairly short time. Production does not require large premises and expensive equipment.

Making simple magnets with your own hands

If you have a little free time and a desire to create something with your own hands, then you can prepare everything you need and make a stylish gift for yourself or a friend, for example, a magnet. In order to make photo magnets or simple vinyl ones, you will need the magnet itself. If you don’t want to spend money, then for these purposes you can use the one that is lying idle at home, or you can buy it in craft stores.

Online stores also offer a large selection of products. The most popular are magnetic tapes; it is better to buy them in a large roll and can be opened home production. In a short time of creating refrigerator magnets you can get original decoration. Instead of magnetic tape, you can buy magnetic photo paper, and print any picture on a printer; the output is ready-made photo magnets made by yourself.

On last stage creating them can be decorated. Can be used for these purposes:

• decorative glass;
• for those who know how to crochet or sew well, making soft magnets will not be difficult;
• for lovers of creativity with natural material on the surface of the magnet you can make a real picture of seeds or flowers;
• refrigerator magnets can represent postcards, disks with decoupage and others;
• making bright magnets with your own hands from salt dough.

Save the article in 2 clicks:

We can summarize that the production of such jewelry can be organized at home, if you have the desire and a creative spark. If you try a little, you will get not only photo magnets, but also wonderful little decorations on household appliances or just a souvenir for a friend. Fridge magnets can become not only your favorite decorative items, but also the beginning for organizing your own enterprise. This one, at first glance simple thing, will become a special highlight in the interior of the kitchen.

In contact with

Do refrigerator magnet not just simple, but very simple. You can do this yourself or with your children. This is a great way to develop imagination and motor skills. This activity can also be turned into an exciting hobby. Anything can be an idea for a homemade refrigerator magnet. Alternatively, you can look at the photographs that are offered to your attention in this article.

How to make a refrigerator magnet

Before you do refrigerator magnet, you need to think about its function. This could be a photograph or picture magnet, a decorative magnet holder for small notes and notes, a toy magnet or.
To make a fridge magnet you will need:

• small magnets;
• scissors;
• PVA glue;
• Super glue.

This is the essential kit for every magnet maker. Then everything depends on your imagination. The main thing is to do beautiful craft small size, so that it looks harmoniously on the door of your refrigerator.
Recently, I came across Cool photo magnets from Instagram. This can also be an idea for your crafts. Simply print out the photo, stick it on thick cardboard or plastic, and attach a small magnet to the back of it. The painted flat pebbles also look very nice. Once, my friends and I made cool magnets from salt dough. After the dough has hardened, you can paint and varnish it. Glue a magnet on the back and attach it to the refrigerator or other metal surface.
As you can see, there are a lot of ideas for creating cool refrigerator magnets! Turn on your imagination and create!