Thermal curtains. Thermal curtains kev Applications and advantages of thermal curtains

Teplomash curtains are engineering equipment, which prevents the mixing of cold and hot air in different zones. By using similar device airspace can be divided, such as an office area and cold storage, as well as indoors and outdoors.

Reviews on choosing a thermal curtain

The main dimensions when choosing the equipment described are length. Ideally, it should be equal to the height or length of the opening; in the first case, we are talking about a vertical installation. A deviation of 10% is acceptable. Buyers note that it is important to take into account the orientation during installation; it can be vertical, horizontal, ceiling or universal.

As buyers emphasize, horizontal devices can only be installed above the opening, and their power can be approximately 6 kilowatts, but no more. Such units belong to the economy class. Vertical curtains can be installed on the sides of the opening; this includes design devices that can be presented in the form of columns. If the interior of the room is important, then you can choose Teplomash ceiling curtains, which are installed under the ceiling system.

Characteristics of the thermal curtain of the Teplomash company of the 100 Optima series

Model KEV-P15 2/10 62E is a curtain for doorways and windows, the height of which can vary from 1 to 2 meters. A tubular heating element is installed inside, and the device itself has ergonomic design. The unit can be installed in a horizontal position, and during operation it can operate in one of three modes. Buyers note low level noise during operation.

This thermal curtain is used to separate zones not only inside, but also outside of rooms/buildings. The air flow separates the outside air from the inside, maintaining favorable climate indoors and also saves energy. This is especially true if there are air conditioning or heating systems inside. The body is made of high quality steel, which is coated with polymer materials, which provides protection against corrosion and long term operation.

Additional features

A reliable heating element is installed inside. The design has mounting brackets and a control unit. If there is a need to block fairly wide doorways, it is permissible to place several curtains side by side. The power of the device can be adjusted in 3 positions. The first involves working in full power, the second assumes half the power, while the third mode is the operation of the fan without heating. When conducting installation work you must take into account that the manufacturer indicates the recommended installation height, which should not be more than 2 meters.

Characteristics of the curtain of the "100 Diamond" series

Such thermal curtains "Teplomash" KEV are intended for openings and windows, the height of which can reach 2.2 meters. The housing is installed inside and is made of of stainless steel, which is polished during the manufacturing process. This model has bright design and just like the one described above, it can work in one of three modes. Distinctive feature This option features a front panel that is made of polished stainless steel with attractive decorative edges. This allows you to create a unique and exceptionally bright modern design equipment. The device is characterized by anti-corrosion resistance, compact size and the ability to operate over a fairly wide temperature range, which varies from +5 to +40 degrees.

Review of the thermal curtain series "200 Comfort"

The curtain KEV "Teplomash" series 200 is intended for doorways, the height of which can vary from 2 to 2.5 meters. There is a finned heating element inside, and the device can be controlled using the remote control that comes included. These thermal curtains "Teplomash" KEV can be used not only for horizontal, but also for vertical installation from any side of the opening.

In order to ensure convenient adjustment of the operation of such a system, you can connect several devices, maximum amount of which there are 6. In this case, it will be possible to adjust the modes using the control panel. The manufacturer recommends installing electric curtains for this model at a height that should not be higher than 2.5 meters. The product is guaranteed for 2 years. You can count on a long service life, which is ensured by overheating protection. The design is equipped with a thermostat. Additional advantages include compact size and versatility of use.

Description of the thermal curtain series "200 Optima"

If you are interested in the manufacturer Teplomash, air curtains from this company can be found on sale today at an affordable price. Among others, it is worth highlighting the “200 Optima” series. This model is intended for entrance doors, the height of which varies from 2 to 2.5 meters. Highly efficient heating elements are installed inside, and the structure has an ergonomic design.

The classic design is complemented by the possibility universal installation, the presence of a control panel and brackets, which are included in the kit. The housing has White color and is made of high quality steel, which is coated with polymers. The equipment can be used in a wide temperature range, which varies from 0 to 40 degrees.

Overview of the main characteristics that you should pay attention to when choosing

Teplomash curtains are very popular among consumers today; if you also decide to follow the experience of the majority, then you should first decide on the basic parameters that the consumer should follow before purchasing. It is important to take into account the presence of a vestibule. In this case, Teplomash curtains are installed inside it, and you can choose equipment of lower power without losing quality, saving money.

Experts advise paying attention to energy consumption and the desired coolant. Thus, electrical devices can consume up to 48 kilowatts. Before you make a purchase, you need to make sure that the electrical network will be able to cope with the load.

If you install the KEV Teplomash curtain, then you must take into account how often the doors are opened. If this indicator is high, then this indicates the need to select equipment with higher power. According to experienced buyers, a curtain with a power of 3 kilowatts will be sufficient for a cafe with a vestibule. If you want to purchase Teplomash thermal curtains for a store, you will need to increase the power of the equipment to 9 kilowatts.

Characteristics of the KEV-98P412W water curtain

If you are interested in Teplomash water curtains, then you can pay attention to the above-mentioned option, which provides heating power within 46 kilowatts. The effective jet length is 4.5 meters, maximum flow air equivalent to 5000 cubic meters in an hour. The power consumption of this equipment is 0.53 kilowatts. If you purchase such thermal curtains from Teplomash, you can count on an increase in temperature up to 29 degrees.

Air-thermal curtains"Comfort" mixing type KEV-9P3011E, hereinafter referred to as “curtains”, are designed to protect an open opening (door) with a height of 2 to 2.5 meters from the penetration of cold outside air into the building by mixing cold air with a heated flow from the curtain.

The curtains are installed both horizontally above the opening and vertically on the side of the opening in vestibules and vestibules. Recommendations on the selection of a curtain, its thermal power and location in relation to the opening, depending on the outside temperature, the number of floors in the building (building height), the type of doors, the number of people passing through the doors per hour, should be given by a heating design specialist and ventilation.

The curtains are not intended to protect openings in car washes and other premises where there is droplet moisture or fog in the air. Curtains of version E have an electric heat source and are designed for operation in both periodic and continuous modes. When opened relatively rarely, doors can be used as an additional source of heat in rooms.

Air-thermal curtains KEV-9P3011E series “Comfort 300”

Thermal curtains KEV-9P3011E series are designed to protect openings with a height of 2.0m to 3.5m in office, retail, warehouse premises, as well as in buildings for cultural and domestic purposes.

Thermal curtains KEV-9P3011E are controlled from a remote or remote control panel. Inside the remote control there is an ambient temperature sensor and a thermostat. The degree of protection of the remote control shell is IP20.

The remote control is a receiving device for the infrared signal from the remote control. The remote control contains: five buttons, five LEDs, an infrared signal receiver and an LCD display. The remote control contains five buttons, an infrared signal transmitter, and a compartment for batteries.

The KEV thermal curtain helps preserve the microclimate of office, retail, warehouse, service or industrial sites. And according to the manufacturer, KEV climate control units will save not only the microclimate, but also the wallet of the owner of an office, warehouse or workshop. After all, the thermal curtains of this trademark They use electricity much more efficiently than devices created by competing companies.

How does the KEV air heat curtain work?

Preservation of the climate of the room protected by the curtain is carried out due to the generation of an air “barrier” - a stream of warm air blown from the nozzle of the climate control unit. Such a “barrier” blocks a door, gate or window opening, preventing contact between the external environment and the heated room. That is, cold air does not come into contact with the microclimate of the office, warehouse or workshop.

As a result, the temperature inside the protected room is equalized, the humidity level is stabilized, and heating costs are reduced. In addition, the air barrier cuts out dust and exhaust gases, prevents the penetration of insects and partially retains odors.

How do KEV electric heat curtains work?

Climate control units of this type are designed based on a thermal convector circuit. That is, the main structural elements The air curtain consists of a housing, a heating element and a turbine driven by an electric motor.

A turbine and a heating element are located inside the housing, and the engine is mounted on the side (or bottom/top) side. The design of the body and the layout of internal and external components is determined by the installation diagram of the curtain, which can be suspended above the opening ( horizontal version) or installed on a wall or floor, on the side of a gate, door or window (vertical installation). In addition, depending on the installation scheme, a nozzle is installed on the bottom or side edge of the body - a narrow slit through which air is blown warm air. Positioning of the air curtain jet is carried out using external pads mounted on the housing nozzle.

Tubular electric heaters or radiators connected to a water or steam heating system are used as a heating element in the curtains. Moreover, thermal curtains with electric heaters are easy to install, but expensive to operate. But “water” or “steam” curtains are famous for their cheap operation, but will require professional installation, with possible restructuring of the heating system.

The thermal curtain turbine is designed as a radial fan. Its dimensions, as well as the characteristics of the engine, are selected based on the performance (the volume of air mass pumped per hour) and the thermal power of the air conditioning unit.

How to choose a curtain?

As a rule, curtains are selected according to the dimensions of the protected opening. Moreover, the geometry of gates, doors or windows must correspond to the operational characteristics (thermal power and performance) of the air conditioning unit and its dimensions. After all, the curtain still needs to be mounted.

Therefore, the installation body must fit into the dimensions of the ceiling or the distance from the edge of the opening to the wall. And the performance characteristics must correspond to the area of ​​the gate, door or window protected by the curtain.

Moreover, in order not to immerse our readers in the intricacies of engineering calculations that determine the identity of power and heat losses, we recommend paying attention to the data specified in the thermal curtain passport. After all, most manufacturers indicate maximum dimensions opening that will be protected by the curtain being sold.

That's why best criterion choice is the passport of the thermal curtain.

Assortment of industrial thermal curtains of the KEV brand

Not the entire assortment of the KEV brand can be included in the segment of industrial climate control equipment. Only climate control equipment with an installation height of 3 meters or more, powered from a three-phase (industrial) power supply, can claim this “title”. Only some models of the Teplomash company fit these criteria, namely:

• Thermal curtain Teplomash KEV-12P3041E . This installation generates up to 12 kW of thermal power, providing a productivity of up to 3000 m3/hour. The installation diagram of this model is horizontal, with an installation height of up to 3.5 meters. However, vertical installation is also possible, when using KEV-12P3041E a 2-meter opening is blocked. The curtain can only be powered from three-phase network(380-400V). And among other advantages, it should be noted the possibility remote control this model, the dual-circuit structure of the heating element, which allows you to switch between 12 and 6 kW of thermal power, and the ability to work only on blowing, without heating. In short, KEV-12P3041E is a high-performance and cost-effective option for a thermal curtain. The price of this model is 18-25 thousand rubles.

• . This installation is mounted only in a horizontal position, covering an opening up to 3.5 meters high. Moreover, the KEV-9P2020E electric heat generator facilitates the installation and maintenance process to a level that requires minimum qualifications of performers. However, ease of installation does not detract from the performance characteristics of this model. The Teplomash KEV-9P2020E curtain generates 4.5-9 kW (at one and two stages of the heating circuit), pumping up to 1.5 thousand cubic meters of air per hour. Another plus of this model is its water resistance. Therefore, the KEV-9P2020E curtain can be installed not only in a warehouse, but also in a car wash. The cost of this curtain is 13-18 thousand rubles.

• Thermal curtain Teplomash KEV-6P2221E . This model can be connected to both a household network and an industrial line. However, the height of the opening protected by this curtain is only 2.5 m. Therefore, the KEV-6P2221E model should be classified only in the “semi-professional” segment of the Teplomash company’s product range. However, the power of this installation is 6 kW, and the productivity is 1.6 thousand m3/hour. That is, for 12-19 thousand rubles you can purchase a curtain with quite “industrial” performance characteristics.

What is standard installation?

Standard installation of a wall split system includes the following features:

1. The length of the route between the blocks of the split system is no more than 5 meters;
2. Inter-unit communications indoors (from the indoor unit of the air conditioner to the hole in external wall) are covered with a decorative plastic box (without gating the routes);
3. The external air conditioner unit is installed under the window using standard brackets;
4. Electrical power is supplied “to the outlet”;
5. The drainage goes outside.

Installation is possible with free access to the section of the wall of the room where the indoor unit air conditioner

In addition, it is necessary to be able to fully open the window through which the outdoor unit is planned to be installed. U

install external unit from 5.5 kW of power at a height of three meters is only allowed

with the participation of an industrial climber, whose services are not included in the cost of installing the air conditioner.

With more detailed information You can find out about the cost of installation work.

Russian thermal curtains from Teplomash appeared on the market several years later than Tropic equipment, but at the same time they are in good demand due to a reasonable pricing policy, thoughtful design and good...

The thermal curtain of the Teplomash 300 E KEV 6P-3050 E brand is intended for installation above openings whose height is in the range of 2-3.5 m. The equipment shows effectiveness when used in shops, offices, small warehouses, public and cultural premises.

The device generates a dense air flow that prevents the penetration of street cold and dust, maintaining a comfortable microclimate inside the facility. The use of Teplomash 300 E KEV 6P-3050 E curtains provides significant cost savings.

Functional Features

• electric heating element;
• economical energy consumption;
• universal installation - horizontally above the opening, vertically on the side of the door;
• low noise level;
• remote control with a monitor for displaying indicators. Several air curtains can be connected to one remote control for simultaneous control of power, fan speed, and heating temperature of the blown air;
• powerful fan;
• mounting brackets included;
• three operating modes: full power, 50%, without heating, which allows you to use the curtain as a fan in the summer season.

Teplomash 300 E KEV 6P-3050 E has a durable body made of sheet steel with stainless properties and a polymer coating that protects against corrosion. The device is reliable, equipped with protection against overheating and voltage problems. The curtain minimizes heat loss in the winter season and maintains a comfortable microclimate in hot weather when operating as a fan.

Thermal curtains of the KEV series produced by JSC NPO Teplomash create a directed air flow that prevents the penetration of street air into the room. The main scope of application is in doorways administrative buildings, offices, retail premises, entrances. By limiting the flow of air during open doors and windows above which KEV thermal curtains are installed, the air in the room retains its original temperature, which reduces the cost of heating or air conditioning the room. The use of thermal curtains is especially important in the cold season, since thermal curtains, using heating elements, heat a stream of air, which in the upper part of the opening prevents the exit of warm air masses from the room, and in the lower part of the opening, prevents the entry of cold air.
Main series and characteristics of thermal KEV curtains

Air curtains KEV series 200E

installed in doorways 2.0 - 2.5 m,
Protection degree IP21
Power from 6 to 12 kW, with the possibility of three-stage control, with a mode for blowing without air heating.
Rated voltage 220/380V 50 Hz.
Electric heating elements are used as a heating element
Remote control included

Thermal air curtains KEV series 300E

Installation takes place in doorways at the entrance to commercial and public premises with a height of 2-3.5 meters in a horizontal or vertical position.
Power versions 6,9,11,12,15 kW
Rated voltage 220/380V 50 Hz
As a heating element, the thermal curtains of this series can be equipped with both electric heating elements and radiators for water heating
When delivered, they are equipped with a control panel that allows you to remotely control air heating and air flow power.
Housing protection degree IP21.

Thermal curtains of JSC Teplomash on our website

Explanation of the designations of the KEV Curtain series

thermal air curtain KEV- X XXX X
X power kW
P Air thermal curtain
X series number
X voltage
0- 380V
1- 220V
2- 220/380V
XXX model number
E electric type heating elements

Questions and answers about the KEV Curtain series

How is the degree of protection and climatic modification deciphered?

Degree of protection - a system for classifying the degree of protection of the enclosure of electrical equipment from the penetration of solid objects and water in accordance with the international standard IEC 60529 (DIN 40050, GOST 14254.

Climatic modification - types climatic version machines, instruments and other technical products in accordance with GOST 15150-69.