Beautiful snowflake made of wood with your own hands. DIY snowflake made from plywood Snowflakes made from plywood

plywood, large enough to make a snowflake
snowflake template (click to download the snowflake stencil)
electric garland, you can use a garland powered by batteries or mains power
drill and bits

First of all, you need to apply a snowflake stencil to the plywood. You can use any one you like or take the one we offer you. We printed a stencil in a printing house on a sheet of A2 paper, cut out a snowflake, placed it on plywood and traced it.

Next, we cut out a snowflake from plywood using a jigsaw; the process is labor-intensive and requires care and precision. You can use both a manual and electric jigsaw. Follow safety regulations.

After the snowflake is completely cut out, using a small sandpaper Rough edges can be processed.

in those places where the garland bulbs will be, we make holes with a diameter slightly smaller than the diameter of the garland bulbs. Light bulbs can be placed like we did, in the center of the snowflake rays or along the perimeter.

Now it's time for painting. We paint the snowflake in any color you like. We chose white.

It's time to attach the garland. Disconnect the light bulbs, thread the garland socket into the hole made in the back, and insert the light bulb into it from the front. Since the holes are smaller in diameter than the bulbs, they will hold on and not fall out.

Secure the mode switch or other heavy elements with reverse side using tape.

Snowflakes are one of the most beautiful symbols of winter and New Year's holidays. They are made from various materials using most known techniques: cutting, folding, embroidering, sewing, knitting, weaving, sculpting. They decorate interiors, clothes, accessories, textiles, covers, notebooks, postcards. “Snow motifs” can be found in jewelry, souvenirs, toys, pillows, panels, carpets and much more.

Cut openwork snowflakes Everyone can make paper. And today we will tell you what other methods of making snowflakes exist. Choose the option you like, prepare the materials and create with the whole family new Year decoration!

Paper snowflakes

When cutting out snowflakes from paper, you can use ready-made ideas from the Internet or come up with your own design. Remember that the thinner the paper, the more airy the snowflakes will be.

Origami snowflakes

Snowflakes made using the origami technique are not as delicate and elegant as those cut out of paper, but they are strong and voluminous. To create such snowflakes, you will need special knowledge and ingenuity! And how to learn to understand the diagram, you can read in our article “Origami”.

Snowflakes using quilling technique

Snowflakes using the quilling technique are glued together from pre-prepared parts - strips of paper rolled into tubes and flattened between your fingers different ways. Quilling requires accuracy and a good eye, but the result is very impressive. In our article “Easter egg decor: master class” we already talked about this type of needlework.

Snowflakes made of cardboard or plywood

Snowflakes needed to create three-dimensional decorations or toys are best made from plywood or cardboard, then they will be strong and rigid. Using a ruler and pencil, mark the outline or trace the finished template, then cut or saw out - and the snowflake is ready! You can also make snowflakes from wooden sticks from ice cream or school rulers. Such blanks can be painted, painted with patterns or decorated using the decoupage technique.

Felt snowflakes

A felt snowflake will make a good Christmas tree decoration, an original brooch, a bag pendant, a pincushion or a hot stand - it all depends on the technique, your imagination and, of course, the thickness of the felt. Thick and dense felt is an excellent material for flat snowflakes, which can simply be cut out according to a template, and it is convenient to sew voluminous snowflakes from thin felt. Felt products can be decorated with embroidery, rhinestones, sequins, beads and seed beads.

Snowflakes made of threads

When making such snowflakes, a base (a wooden plank, cardboard or polystyrene) and pins (nails or pins) are used, between which a thread is pulled tightly. If you pre-moisten the thread with glue, you can get a hard snowflake: just wait until it dries and then remove the pins.

Snowflakes made of beads and beads

Not only Christmas tree decorations or other New Year's decorations are made from beads and beads, but also earrings, pendants, pendants, and keychains. To create such a snowflake, you will need beads and/or beads, as well as fishing line, wire or thick thread, a snowflake pattern that is easy to find on the Internet, and a little perseverance.

Knitted snowflakes

If you know how to crochet and have ever knitted napkins, you will not have any difficulty crocheting a snowflake, because they use similar patterns. To give knitted snowflakes stiffness, they should be starched.

Snowflakes made of polymer clay

Polymer clay is a material with wide possibilities, you can make very beautiful snowflakes from it, for example, using filigree or extrusion techniques. When making it, you can follow our master class “DIY Decorations for Valentine’s Day”, just change the shape of the product and color.

Snowflakes made from glue

This is a fairly simple way to make snowflakes, for which you will need a glass surface and special glue (transparent, colored or with glitter). Draw a snowflake on the glass using glue; you can first place a template under it. When the snowflake dries, you can leave it on the glass - if, for example, you were decorating a window - or carefully remove it and hang it on a thread.

We are waiting for your ideas for making snowflakes in the comments. Happy New Year!

All photos from the article

If you have leftover plywood, you can use it as a material for making various New Year's crafts. To do this, you don’t need to have complex equipment on hand or have woodworking skills; everything is quite simple and can be done even by those who have no experience in carrying out such work.

We will tell you about some product options, and you can implement any of your own options, using the tips for carrying out the workflow as a basis.

Required materials and tools

In order to make this or that product, you will need the following list of materials and devices:

Plywood	When choosing, take into account the features of the manufactured crafts: for small elements and products of complex shapes, it is better to use sheets of small thickness; for more massive structures, material of greater thickness is needed - from 10 mm or more. In addition, the location should also be taken into account; for options installed outdoors, it is necessary to use moisture-resistant plywood, for interior work The regular option will also work
Cutting tool	Again, the choice depends on the thickness of the sheets being processed; if for thin options and is suitable, then for thick plywood it is better to use either electric jigsaw, or a special hacksaw for figure cutting with small tooth size
Required sketches	If you know how to draw well, you can do all the drawings on paper yourself, but you can also use ready-made options. You can find many solutions on the Internet: entire compositions of New Year’s characters, and drawings of snowflakes made of plywood. You just need to choose the option that you like best and which you can implement
Paints	It is almost impossible to make interesting and bright crafts without decorating them, so take care of the paints in advance. If any option is suitable for interior work, then for exterior structures we need weather-resistant compounds that should be able to withstand adverse weather conditions well.

Advice!
If you find a drawing that is smaller than the required size, don’t worry, increase its scale to the required size and print it in this form, all the ratios will be preserved, and the parts will fit together perfectly.

Regarding production various crafts, then there are two options - two-dimensional or three-dimensional structures. We will consider each type separately, since the process has some differences.

2D products

If you do the work yourself, you should adhere to the following recommendations:

First of all, you need to purchase required material, for the street it is best to use plywood glued with bakelite resin, or use laminated sheets that are well protected from moisture;

Next, you need to make a sketch of the product on a scale of 1:1, so you need to transfer the drawing to a large sheet. If you need a big Santa Claus made of plywood, doing it yourself is problematic, but modern copying equipment increases the scale to the required level automatically, observing all proportions;

The drawing is transferred to plywood either using carbon paper, or simply glued if the product is large, and cutting is carried out directly on the paper. Naturally, in the first case the sketch can be used several times, and in the second only once;
Cutting is carried out along the line, it is important not to allow significant deviations, as this will negatively affect the final result of the work. Next, you need to process the ends with sandpaper: remove burrs and lint, round the edges and make the surface as smooth as possible;

Advice!
To ensure that the material cracks less when cutting, the surface is impregnated with a mixture of wood glue and water in a ratio of 1:2.

The last stage is painting, it is better to apply a primer first and then paint the product. Special attention Pay attention to the ends, they absorb moisture best and need special protection from adverse influences.

3D designs

We will tell you how to make a sled from plywood with your own hands. This type of product will be appreciated by children, as they can be used in winter.

The work process looks like this:

First of all, you need to find or make a drawing of a plywood sled yourself, as an example we will show one simple option;

You also need to cut out the seat, for it it is best to take material 10-12 mm thick, its dimensions are shown in the diagram below. Cutouts on the sides and front allow you to hold on to the seat and attach a rope, and the handle on the back is great if you need to ride small children;

When cutting, pay close attention to the connecting grooves and. The elements are assembled using self-tapping screws 35-40 mm long, for which holes with a diameter of 2 mm are pre-drilled;

Greetings, my dear readers.

So, today I will make a snowflake from wood with my own hands. I wrote this article back on the New Year holidays, after I received a letter from Ucoz, where the admins organized this interesting competition:

Competition for the most creative!
What do we have to do:

draw or make your own uSnowflake from any material (U logo on a snowflake is welcome!);
No nominations - only prizes!
- 5 gift certificates in the amount of 5,000 rubles from the OZON online store
- 15 exclusive secret souvenir gifts;
- 5 lifetime premium packages;
- 3 individual site audits from a specialist;
- traffic to the site.

To my great joy, I finally moved from Yukoz to WordPress, but I decided to leave the article anyway - maybe someone will be interested :)

How to make a snowflake from wood with your own hands

In order to do something - be it a snowflake or, you need to decide on the end result finished product. That is, you need to clearly understand what you want. And to do this you need a drawing or at least a sketch (sketch).

Snowflake made of plywood - drawing

This is of course very approximate, but I already have something to build on.

I take a piece of plywood and draw a small circle on it - I plan to place the logo in it.

Then we draw an outer circle - these will be the edges of the future snowflake, and divide it into six equal parts.

And after some time I received finished drawing snowflakes made of wood

How to make a snowflake from wood with your own hands?

So, the drawing is ready. Hands to feet, I take a jigsaw and start “cutting”, or to be precise, sawing out...

And once...

And two...

And this is what happened...

I sawed a snowflake out of wood and now it needs to be sanded a little to remove the “burrs”

Let's move on to the next stage...

How to paint a snowflake made of wood?

I spent a long time deciding on the color and decided that I would paint it in Blue colour. After using up almost a year's supply of children's paint, it turned out like this.

At first I thought that I would paint only the main part, but after thinking a little, I decided that I needed to paint the side part as well, in order to eliminate “bald spots”

Well, I did all the operations described above, and after waiting for the base layer to dry, I started drawing the patterns. I'm a terrible artist, so it turned out like this snowflake

I screwed up the main logo a little, but after a little witchcraft it turned out not too bad! (If you don’t praise yourself, no one will praise you).

That's it, friends, with a little handiwork, I made a snowflake out of wood with my own hands and no plagiarism!

P.S.

Friends, to my regret, I did not become one of the first three winners, but received a consolation prize - 3 months of a premium package from Ucoz, although at that time I already clearly realized that it was time to switch to WordPress :)

Good luck to everyone, and I just have to remind you that in touch with you was a true connoisseur of hand-to-hand combat - Alexander Alexandrov.

DIY snowflake made of wood: photo

To ensure a tight fit, move the file close to the lines that define deep, unshaded cuts. If they turn out to be too narrow, they can be widened with a file.

Make a template for marking and cut out cuts in the second layer

Instead of cutting along the lines of a paper template, trace the template made from scrap plywood with a marking knife to ensure a tight fit.

When cutting cuts in the second layer, the file should not touch the marking lines. If necessary, the width of the cutouts can be adjusted later.

THERE ARE CUTOUTS IN THE HALVES ALSO

Dividing the third layer into two halves, mark and cut out the cutouts on the straight edges, again leaving a slight allowance for adjustment.

DRILL A SMALL HOLE

Using a thin drill, make a hole 6 mm deep in one of the internal corners, where all three layers intersect. Don't be upset if the drill goes right through, because no one will notice.