What to cook
In order to make a sofa you will need the following:
Bath;
bathtub cutting tool;
felt-tip pen;
soft seat;
dye;
bath legs.
As for the tools, it all depends on what exactly the bath is made of. It's one thing if it's acrylic and quite another if it's cast iron. By the way, it will be much easier in the case of acrylic product, good option steel bath, but with a cast-iron bath you have to tinker. We also note that cast iron products always have a very large weight. Well, in general, here, of course, it's up to you.
Making a sofa with your own hands
Initially, you need to modify the bath. The task is to remove one of the sidewalls, it must be cut out. For this purpose, depending on the material, you can use a grinder or autogen, acrylic can be cut, including with a jigsaw. The main thing is that the cut is even. By the way, that's why you need to markup first. To do this, you actually need a marker. Also, if the surface of the bathtub is stained and if it is not beautiful at all, you will need to fix it.
In any case, the edges of the cut must be rounded. When the cutting is done, you can install the legs. Note that they can be painted, however, like the sofa body.
As for the seat, you can do it yourself. You need to sew a small mattress. To do this, you need foam rubber, a synthetic winterizer, as well as a dense and at the same time delicate fabric. And, of course, you will need sewing machine, as well as a needle, thread and a soft meter. First you need to cut out the base from the synthetic winterizer and foam rubber. Then on this basis you need to sew a cover. By the way, it would be nice if it is removable. For this you need lightning.
That's basically it. As you can see, the task is not very difficult. Everyone can cope with the creation of such a sofa House master. Well, what about the materials, then find old bath is not currently great work, as well as sew a small mattress.
- Many in Lately decide on a large-scale renovation in the bathroom, during which a replacement is expected old bath.
An old cast-iron bathtub is a valuable item, so throwing it away or scrapping it is not the smartest thing to do. Experienced gardeners they take the bowl to the dacha and build things useful in the household from it. A few examples of the use of the font will be useful to novice gardeners.
Why You Shouldn't Throw Out Your Old Bathtub
Cast iron fonts are extremely practical products, the service life of which is at least 50 years. The material resists corrosion thanks to a special protective film easily tolerates temperature fluctuations, does not emit harmful substances into the ground.
When the enamel layer is snapped off, the area of the defect is cleaned and covered with acrylic paint.
Here are some of the benefits of cast iron tubs:
- capacity;
- high degree of tightness (if you plug holes);
- high sides;
- presence of holes.
And now about how baths are used in the country.
Country furniture
The smooth shapes of the walls and the bottom are a ready-made frame for the construction of armchairs, a sofa. From one bowl, 3 pieces of furniture are obtained - a pair of chairs and a table. There will be only one sofa.
They do it like this:
- mark three equal transverse cuts along the entire horizontal;
- extreme pieces with walls and a transverse lintel - armchairs;
- middle - table (turn over and put on the walls).
The edges are polished, the seat is equipped with a warm mattress or pillows - you're done. External decor to the taste of the owner - staining, mosaic. To make a sofa, cut out one large wall, leaving the other three walls. The cuts are also polished, a soft bedding is made on the seat.
To prevent the legs of the bathtub from pushing through the ground or wooden floors, thick pieces of rubber stopper are put on them.
flower garden
The most difficult thing is to choose the place of the future flower bed, the rest will take just a couple of minutes:
- plug the bottom
- lay out a layer of large pebbles;
- pour some sand;
- fill the bath with soil;
- plant flowers.
All is ready. The outer planes are decorated with broken tiles, stones - fixing with glue Moment. The walls are painted, painted and even a “slide” is made - pots with flowers are placed on the soil so that they grow to the edge of the bath, covering the outer walls.
On a limited area of \u200b\u200bthe site in the bathroom, a multi-tiered flower bed is being built. They put a frame with shelves, stretch the film and install flower boxes. The soil in the bowl is the first level, the rest are raised with shelves to the desired height.
If you install a bathtub in the corner of the garden adjacent to the wall, start up a cascading fountain - the relaxation zone will make you forget about gardening forever.
Water tank
Plug the drain and overflow holes, fill the bowl and let stand in the sun. warm water much better for watering than cold. Plants do not experience stress from temperature changes; soft settled moisture will not burn young crop bushes. So that the device does not look too defiant, the sides are painted, tightened with a film or decorated in another way.
When choosing a color, dark shades are preferred - they conduct heat better, the water heats up faster.
warm high bed
A sore back and knees do not allow you to stand on the beds for a long time - take a bath. To make a high warm bed for any crops, take:
- almost a whole bath (the old ones with a chipped enamel layer are perfect);
- paint the walls with dark paint;
- do not plug the drain and make a couple more holes in the bottom (an impact drill will come in handy);
- a layer of pebbles is thrown at the bottom;
- a layer of sand is poured onto the pebbles, leveled;
- lay out a layer of old newspapers, compost or even an artificial carpet - the insulation is ready;
- spread nutrient soil.
Any crops are planted - even capricious eggplants will quickly grow on such soil. The high sides of the bath allow you to care for plants without tilting.
To get rid of weeds, the surface of the beds is mulched with newspapers and straw. The coating will not let weeds through, but will not interfere with the growth of zucchini, tomatoes, etc.
Greenhouse
A high bed from the bath is covered with a frame of rods and a film is stretched - the greenhouse for cucumbers is ready. The frame is made to the desired height, instead of a film, they take lutrasil. The membrane will provide ventilation, but will not let through cold air to plants. Cucumbers grow especially well in such greenhouses.
Pool or pond
Of course, a large pool will not work out of a bath, but the kids will be happy to splash in the warm water in the fresh air. The principle of constructing a pool or pond is the same:
- Dig a hole to the desired depth. Sand is poured at the bottom - this is so that the bathtub stands tightly and does not stagger.
- The bath is lowered into the pit, the gaps between the walls of the container and the plumb lines of the soil are filled with earth.
Now water for the pool is drawn into the font - by pulling the hose through the overflow hole. To build a pond, flowers in pots are lowered to the bottom, fountains are built, etc. Visible surfaces and soil around the bowl are also decorated in any chosen way.
The depth of the pit depends on the height of the sides of the font and the desire of the owner. The standard is considered a deepening of 2/3 of the height of the walls.
And more options for using the bath in the country:
- capacity for bulk building materials;
- a table with a wardrobe - they put a lid on the bath, put everything you need for tea drinking, marinades or something else under it;
- grill - a grate is installed on the sides, a fire is made under it;
- a container for storing inventory, bookmarking compost, etc.
To build a multi-tiered oven, the font is placed on side wall(short). Now the container is marked out, in the lower part there is a firebox, and in the middle part there is a barbecue or stove for cooking dinner.
If the old bathroom has served its time, do not rush to throw it in a landfill or scrap it, you can make a rather original and creative sofa out of it with your own hands. Such a sofa can become a decoration of any home, from an apartment to country house, also it will fit well into the interior of various salons and service offices.
For the manufacture of such a sofa, an old cast-iron or metal bath is suitable, although it is better to give preference to a cast-iron one, it has good stability and original form especially if it's old. Making a sofa from a bath is quite simple, all you need is an old corner bath Grinder(Bulgarian) with cutting wheels for metal and sanding attachments, enamel paints for painting the bathtub and foam rubber with fabric for seating and cushions.
Having removed the legs, we clean off the damaged and exfoliated areas of paint and enamel.
Having laid the bathtub, we draw on one side the intended shape of the sofa frame, everything here depends on the wishes and own fantasies. Cut lines can be straight, oblique, curved, semicircular, etc.
We cut out with a grinder and do not forget about personal protective equipment.
Having cut out the extra part of the bath, we grind the cut line from burrs and make it more rounded. You can paint with any paints intended for a metal base, these are all kinds of enamels, nitro paints, aerosols and the like.
The legs in such bathrooms are self-tightening under weight, they must be cleaned, painted and put on groove inserts. In their absence, you can weld necessary frame from pipes or squares and install in it, you can also make stands from stone or wooden beams.
Make a pretty seat simple work, we take foam rubber of a suitable thickness and cut out the necessary shape from it.
We wrap the cut foam blank with synthetic winterizer or spandbond.
Then we cover with a cloth, if possible and desired, you can sew a cover and insert foam rubber into it.
Cushions for the back and side armrests can be sewn independently or purchased ready-made in the store in suitable colors and sizes.
Here you can see that the seat base is made of wooden planks, which in turn can be covered with a blanket, bedspread or soft blanket.
In this variant, all inner part pasted over with foam rubber and a one-piece cover is sewn.
The laid on back and headrests will give a business look to such sofa.
The right combination of colors and colors will give the sofas a unique glamour.
Cutting the bath in half, we get two original and pretty comfortable chairs, which will be a spectacular addition to your do-it-yourself sofa made from an old bathtub.
If the old bathroom has served its time, do not rush to throw it in a landfill or scrap it, you can make a rather original and creative sofa out of it with your own hands. Such a sofa can become an ornament of any home, from an apartment to a country house, and it will also fit well into the interior of various salons and service offices.
For the manufacture of such a sofa, an old cast-iron or metal bath is suitable, although it is better to give preference to a cast-iron one, it has good stability and an original shape, especially if it is of an old design. Making a sofa from a bathtub is quite simple, all you need is an old bathtub, an angle grinder (grinder) with cutting wheels for metal and grinding nozzles, enamel paints for painting the bathtub and foam rubber with fabric for seating and pillows.
Having removed the legs, we clean off the damaged and exfoliated areas of paint and enamel.
Having laid the bathtub, we draw on one side the intended shape of the sofa frame, everything here depends on the wishes and own fantasies. Cut lines can be straight, oblique, curved, semicircular, etc.
We cut out with a grinder and do not forget about personal protective equipment.
Having cut out the extra part of the bath, we grind the cut line from burrs and make it more rounded. You can paint with any paints intended for a metal base, these are all kinds of enamels, nitro paints, aerosols and the like.
The legs in such bathrooms are self-tightening under weight, they must be cleaned, painted and put on groove inserts. In their absence, you can weld the necessary frame from pipes or squares and install it in it, you can also make stands from stone or wooden beams.
Making a seat is a fairly simple job, we take foam rubber of a suitable thickness and cut out the necessary shape from it.
We wrap the cut foam blank with synthetic winterizer or spandbond.
Then we cover with a cloth, if possible and desired, you can sew a cover and insert foam rubber into it.
Cushions for the back and side armrests can be sewn independently or purchased ready-made in the store in suitable colors and sizes.
Here you can see that the base of the seat is made of wooden boards, which in turn can be covered with a rug, bedspread or soft blanket.
In this version, the entire inner part is pasted over with foam rubber and a one-piece cover is sewn.
The laid on back and headrests will give a business look to such sofa.
The right combination of colors and colors will give the sofas a unique glamour.
Having cut the bathtub in half, we get two original and rather comfortable armchairs, which will be a spectacular addition to your sofa, made from an old bathtub with your own hands. The requirements for the top casino rating of 2019 are here http://www.wowmagic.ru/kazino-zerkalo/top-rating-onlajn-kazino/ How to choose the top casino?
Do it yourself
DIY door upholstery
After overhaul a lot of the old remains in the house building material, including wooden doors. We offer one of the options for how to beat the door with your own hands ....
How to make a sofa
Making a sofa on your own is within the power of every person, even with minimal skills in carpentry, a little skill to use construction tool And...
First you need to remove the legs (if any) and clean off the peeling paint and enamel with a grinder.
2 step
Then turn the tub over to mark the cutout for the future sofa. The shape of the cutout can be smooth, sharp, semicircular, it all depends on your imagination and wishes.
It is worth cutting with a grinder with a cutting wheel for metal. Work with this tool very carefully, take care of protective equipment in advance.
3 step
After the cutout is ready, the cut should be sanded to remove sharp edges and burrs. Then you can start painting the future sofa. To do this, use any paint intended for metal (enamel paint, nitro paint, aerosol, etc.), you can apply several paints to decorate the sofa, draw any pattern or pattern applied by hand or using a stencil.
4 step
The legs can also be painted in any color and installed in its original place. Stones can be used as a stand or wooden beams(or kick).
5 step
For softness and comfort, you can make a seat from foam rubber, cut to the size and shape of the bath. Wrap the resulting shape with synthetic winterizer. You can sew a cover for the foam seat or simply wrap it with a cloth and lay it on the bottom of the bath. You can also sew or purchase pillows under your back, which will make your stay on such a sofa even more comfortable.
