Corner false fireplace made of cardboard. Do-it-yourself fireplace from boxes - step-by-step manufacturing instructions in different styles with photos

Modern fireplaces have long ceased to be solely a source of heat; now they have become stylish and fashion accessory. Now this design element can be installed even in apartment building, since there are many alternatives to the wood-burning option: electric, gas, and biofuel fireplaces. It is possible to recreate false fireplaces: polyurethane, plasterboard, foam and even paper.

You can create such a fireplace with your own hands without much effort. Let's figure out how to make a fireplace out of paper. There are many options on how you can make a fireplace out of paper with your own hands. Let's look at some of them.

Advice! You can glue several layers of paper, but it will be much easier to use cardboard. Even boxes from large appliances: refrigerator, TV, etc. will do.

False fireplace, simple cardboard or paper

Required:

box;
decorative plinths and foam figures;
drawing;
scissors, construction knife;
a pen, a simple pencil for marking according to the drawing;
construction tape;
specialized glue;
putty, as well as a spatula;
ruler;
water-based paint: brown or white and other shades;
brush.

Manufacturing stages:

Creating a drawing using pre-prepared dimensions.

Transferring the design onto cardboard or paper, which is glued in several layers. You will need a pencil as well as a ruler.

Electric fireplaces are extremely popular. There are several types of installations, the most common being corner electric fireplaces. To give the hearth the appearance of a traditional fireplace, a plasterboard portal is made. You can do this yourself, following the suggested instructions.

Advice! You cannot use markers or felt-tip pens, as they will show through the paint, and you will need to apply putty before painting.

You need to make slits for the hearth; they will be bent to the back wall and secured with tape. In this way a portal is formed.

When the base is ready, you should begin finishing. The foam parts need to be fixed to the base, according to the sketch.

A wide patterned plinth is glued on top. It will be the basis of the future fireplace shelf made of paper.
Foam supports should be placed behind the fixed baseboard. On top you need to put a slab of the same material.

Advice! To make the fireplace look beautiful, you should pay attention Special attention corners. There should be no gaps at the joints. Well, if it doesn’t work out, then putty will help correct the situation.

Once all the parts are in place, you need to carefully apply putty to the paper fireplace.
When the coating is completely dry, water-based paint should be applied. The false fireplace is ready.

You can put figurines on top.

Corner fireplace made of cardboard or paper

This type of model will look great in a corner. She will bring zest to design solutions interior organization. Anyone can make a paper fireplace, the master class of which is presented.

Required:

a cardboard box or glued thick paper;
self-adhesive film or wallpaper with a brick pattern;
scissors or a construction stationery knife;
scotch;
garland, LED strip or battery-powered candles.

Manufacturing stages:

From the box you should make a base in the form of a triangle.

The workpiece must be covered with wallpaper or self-adhesive film.

The tabletop should be made of several layers of cardboard.
The top of the fireplace should be covered in the same way.

You can place a garland in the firebox, LED strip or battery-powered candles.

Advice! The tabletop can also be made of foam or fiberboard.

Cardboard or paper fireplace with hidden shelves

A decorative model is not only an interior decoration; at the same time, you can create a hiding place or small shelves for small items in its walls.

Required:

a large box or several;
glue;
scotch;
putty;
decorative skirting boards.

Creation stages:

You should create a fireplace out of paper with secret shelves starting with the formation of the “base” or “skeleton”.

Advice! When creating a skeleton, you need to take into account the required size of the shelves.

When the base is ready, it should be covered on both sides with cardboard or paper glued in several layers.

The podium or tabletop is made of several layers of cardboard.

Advice! If desired, the cardboard can be replaced with a sheet of foam plastic. For reliability, the joints should be glued with newspaper using PVA glue.

A wide decorative plinth should be glued to the top of the paper false fireplace. Its top edge should be flush with the tabletop.
A seventh sheet needs to be glued on top of six sheets of cardboard and baseboard.
The corners are closed with a construction corner.
The firebox can be covered with wallpaper with a pattern or cut out bricks from cardboard with a stationery knife and painted.

A paper fireplace should be puttied.
After that it needs to be painted. When the paint is dry, it can be decorated.

Advice! You can glue a false fireplace from several boxes, each of which will be a separate shelf.

A paper fireplace, the master class of which is presented in step-by-step instructions, is easy to create. This does not require specialized skills or special financial costs.

Video: DIY cardboard fireplace

Modern owners of apartments or houses are increasingly seeking to build fireplaces. Of course, it is impossible to install a wood-burning fireplace, but a false fireplace is possible. There are many manufacturing options, they are not complicated. A fireplace made of paper, created with your own hands, will be no worse than others. It will harmoniously complement the interior design. When it comes to the firebox, there are many options. You can make it yourself or purchase an electric version that will create the illusion of burning wood. Modern hearths can also produce sound and create various effects.

Create a romantic atmosphere in the house, a good mood in winter and comfort all year round will help decorative fireplace from boxes with your own hands. Step-by-step instructions will help you avoid doing “dirty” work in the house, diluting cement and dismantling the roof for the chimney. A fireplace can be created in one evening using scrap materials. So, let’s turn on our imagination, involve children in the work and start creating.

How to make a fireplace from cardboard boxes

To build such a fireplace we will need:

Cardboard boxes: small, for example, for shoes (5-6 pcs.) and large (4 pcs.)
Scotch tape: regular and double-sided
PVA glue
Thick white paper or a piece of old wallpaper
Sheets of cardboard or wallpaper with a brick pattern
Ruler, simple pencil.

To prevent the boxes from opening, we tape all the joints together with tape. According to the drawing in the figure, we assemble the base of the future fireplace. We glue the boxes that will make up the parts of the fireplace with tape together. For the side racks we use smaller boxes stacked on top of each other. We make the base of the fireplace and the upper mantelpiece from larger boxes, butted end to end with the short sides.

We glue every part of the fireplace thick paper or old wallpaper. Boxes must be completely covered with paper. We connect the edges of the paper with tape. Now we glue the parts of the fireplace together with PVA glue. The product is ready, all that remains is to design it.

To decorate the fireplace, we use wallpaper with a brick pattern or sheets of thick cardboard. Four “bricks” can be cut from one cardboard sheet. We cover the fireplace with wallpaper, giving the look brickwork. If we use “bricks” cut out of cardboard, we glue them onto the surface of the boxes, creating rows of bricks and leaving gaps between the bricks, so that it is as similar as possible to natural masonry.

To glue the “bricks” we use PVA glue. The back wall of the fireplace, adjacent to the wall, does not need to be covered. If the cardboard is white, paint it with paints of appropriate shades - from sandy yellow to dark red.

The fireplace is ready, let's install it in a prepared place in the room, against the wall. We will put decor on the mantelpiece, and we can put natural logs or their imitation in the hole for firewood. Here we focus on our imagination.

Exquisite decorative fireplace from a large box

Let's prepare materials to create a fireplace. For this you will need a large cardboard TV box. You can use thick cardboard instead of a large box. But then you need to be prepared for the fact that it will have to be cut and glued.

You will also find it useful for making a decorative fireplace:

Stationery knife
Scotch
PVA glue
Skirting boards and foam decor
Paint in a can
Ruler, simple pencil.

We transfer the drawing to the TV box. We cut a hole in the middle of the box according to the drawing. This will be the “hearth”. We fold the cut edges and glue them to the back wall of the box. If cardboard is used, we cut the sheets according to the drawing, taking into account gluing tolerances. We connect them together with glue.
To make the top of the fireplace, take a sheet of foam plastic or plywood, or glue together several sheets of cardboard. Glue the resulting mantelpiece to the fireplace itself.

To ensure that the fireplace is stable, it is better to glue an additional sheet of cardboard or plywood to the base. IN hardware store let's buy ceiling cornice made of polystyrene foam and a couple of decorative elements - foam pylons or rosettes. They will add sophistication and grace to our hearth. Let's glue the decor to the fireplace. To do this, use PVA glue or liquid nails.

We paint the fireplace in two layers with white or other pastel color spray paint. So as not to spoil flooring, lay old newspapers or paper on the floor. After painting, let the product dry and install the fireplace. The decorative fireplace is ready.

Firewood for the hearth can be made from cardboard, twisted into logs, or natural branches can be used. If the fireplace is planned in one color, we will paint the firewood with the same paint. You can also place candles in tall glass glasses or an electric garland in the recess of the hearth. Decorating the mantelpiece also leaves room for creativity. Photos in beautiful frames, paintings or flower arrangements and memorable gifts in bright packaging will look great on the mantelpiece.

Photo of a decorative fireplace out of a box

It is very easy to create beauty and comfort in your home with your own hands. Imagine and create, then you can do it DIY decorative fireplace made from boxes using step-by-step instructions in the shortest possible time. Your apartment can be decorated with simple decorative items with minimal costs. All it takes is a little time and effort.

Decorating a false fireplace for the New Year and Christmas holidays is one of the obligatory rituals. To do this, you can use various attributes, decorations and decorations. It all depends on the imagination of the master.

On the eve of the New Year holidays, everyone is in a hurry to decorate their homes. A decorative fireplace is traditionally included in the list of interior items that require thematic decoration. There are many options for decorating a false fireplace, the most basic ones will be discussed in this article.

Decorating a decorative fireplace is a creative process. It all depends on the flight of fancy of the master.

Decorative Christmas fireplace: stages of creation

Before we talk about decorating a fireplace, you need to pay attention to the issue of its creation. Not everyone knows that a false fireplace can be made from an ordinary cardboard box. To construct it, you need to prepare unnecessary cardboard packaging from plasma or refrigerator. If you don't have a large box at hand, you can use several smaller ones. From the available materials you will need a knife, glue, tape, pencil/pen, ruler and paper. Stages of creating decorative cardboard fireplace for the New Year:

First you need to think about the design of the festive fireplace and its size. The finished sketch can be found on the Internet. It is recommended to put the plan diagram on a sheet of paper.
There are two options for a Christmas fireplace - it all depends on the installation location of this subject interior If it stands against the wall, we will talk about a wall fireplace, if in the corner - about a corner fireplace.2

Features of creating a wall-mounted false fireplace

The easiest option for creating a fake fireplace is to make a “hearth” directly from one or more boxes. If only one cardboard package is used, then a rectangular window is cut out in the front according to the markings. The combustion hole or place for the “hearth” is made in the likeness of a real brick fireplace. The flaps of the hole are bent inward and fixed with glue. For the fireplace bigger size take three boxes, two of which are side “outbuildings”. The boxes are glued together and “equal” to each other.

Advice! It is better to glue the inner walls of the box with tape in advance so that the packaging does not “fall apart”.

The resulting fireplace with a combustion hole is painted with water-based white paint or covered with paper. The mantelpiece is cut out of cardboard or plywood to fit the size of the upper part of the “hearth”. It is attached to the top with glue. The fireplace is decorated with borders and baseboards, foam forms, etc.

More robust design A decorative fireplace made of cardboard is made of three main elements: the base, the combustion portal and the shelf. A rectangular box is used as a basis; its size should be 5-10 cm larger than the parameters of the future fireplace. In inner part The base is attached with cardboard stiffeners, this will make the body more durable.

Marking a future cardboard fireplace with a combustion hole. It is recommended to draw the main lines with a pen, and the auxiliary lines with a pencil.

The fireplace portal is made from a box with a cut-out combustion hole. The side strips are folded inward and secured with tape. Next, the place for the hearth is inserted into the finished base in the middle and sealed. The mantelpiece is made of denser cardboard, along the length of which cardboard panels are placed for structural rigidity. The shelf is attached to the top of the portal using polymer glue. Next, the fireplace is covered with paints, a primer or covered with wallpaper/film. It all depends on the desires and preferences of the master.

Video: decorating a false fireplace

Corner decorative fireplace

It differs from the wall one in its shape. It is installed in the corner space of the room, so it is better to take all measurements directly in the selected location. The box is placed in a corner and the combustion hole is cut out according to the principle described above. The back wall of the package is removed, and the side walls are cut to fit the angle. Thick cardboard or plywood is also attached to the top. The material must be light and strong enough to withstand light loads. Otherwise, it will be impossible to put anything on the mantelpiece. The resulting fireplace is painted with water-based paint or putty.

Options for decorating a cardboard fireplace for the New Year

You can make an ordinary fireplace festive using improvised means. There are no specific decorating rules. Everyone decorates “their brainchild” in their own way. Below are a few possible options to create a New Year or Christmas atmosphere:

Making homemade firewood/woodpiles. It’s hard to imagine a real fireplace without logs. The decorative fireplace is also decorated with fake firewood. They are made from corrugated cardboard, rolled up. The larger the sheet of cardboard, the thicker the log. Knots are made from smaller rolls of cardboard placed on glue. The surface of the logs fixed with tape is painted white, and the places where they are twisted remain unchanged. The woodpile can be placed right next to the fireplace, using the space next to the “hearth”. Real logs are often used for decoration.

Advice! You can make homemade firewood to match any type of wood by painting it with the appropriate paint.

Imitation of fire. For obvious reasons, you won’t be able to light a real fire in a cardboard fireplace, but you can create an imitation flame. It is recommended to place burning candles or candlesticks in the firebox of a false hearth. Even a small live fire will give the fireplace a mesmerizing festive look. An original option for decorating a fireplace is to install stands made of logs for candles.

Advice! You can replace fire with New Year's garland, twisted in several layers and laid inside the combustion portal. You can also use lantern candles or candles in a glass. These are the safest decoration options.

Finishing. When imagining the Christmas holidays, thoughts of a real brick fireplace immediately come to mind. You can make a decorative fireplace “like a brick” in several ways. The first is to cover it with wallpaper with a corresponding textured pattern. The second is to cut out rectangles from foam or cardboard and glue them to the surface of the fireplace in the form of brickwork. The figures should resemble “bricks”. The fireplace body is primed so that the structure is made in a single color. Next it is coated with brown paint. The space between the “bricks” can be left white or painted yellow/gold.

Advice! To add texture, the masonry is dotted with silver or gold paint using a sponge.

Scenery. To decorate, you can use the usual attributes of this holiday - tinsel, Christmas tree decorations, rain. Along the edges of the fireplace you can place a rag gift “boot” for children. You can also decorate the mantelpiece; the most common option is to place garlands or tinsel along the tabletop. Inside the firebox you can put figurines of Father Frost, Santa Claus, photo frames, or leave space for placing cards and gifts. You can decorate your holiday fireplace with wreaths, paper snowflakes, flags, posters, photographs or homemade garlands.

To decorate the fireplace for the New Year, you can use the combustion chamber, the walls of the structure and the mantelpiece. The main rule is not to overdo it with the number of attributes.

You can create the appropriate mood using thematic attributes - a vase with dried flowers, a forged poker, etc. You can make the fireplace sparkle with new colors using a disco ball or a projector, which will make the room festive and unusual.

Advice! The gifts of the forest - branches and cones - will help create a festive atmosphere. However, placing them near an open fire is unsafe.

You can decorate it in different ways. For some, it will be enough to install a decorated Christmas tree next to the fireplace, while others will move cozy armchairs closer to the “hearth.” You need to decorate a false fireplace at your own discretion, depending on the number of festive attributes and flights of fancy.

Winter celebrations are approaching. I really want to create in the house an atmosphere of not just a holiday, but also real winter comfort. How to do this? We invite you to make a fireplace out of cardboard with your own hands. To do this, you won’t need any super expensive materials or exorbitant knowledge, but the result will still be amazing. Do you remember the good old fairy tale about Pinocchio? There, too, in Papa Carlo’s closet, a hearth was painted, and those around him did not even realize that it was not real. Well, let's try to master this unusual art!

As you probably know, cardboard is an environmentally friendly material, from which various decorative elements, furniture and even houses have been made for decades (though these are Western technologies). However, lovers of non-standard types of needlework also did not leave cardboard without attention. So, let's assume that things are moving towards the New Year. Well, this is a great reason to turn ordinary cardboard into a real work of architectural art.

Making a cardboard fireplace with a painted fire

This step-by-step instruction will not cause any difficulties even for beginners, so you can safely prepare the materials necessary for work, namely:

thick, smooth cardboard;
ruler, pencil and centimeter;
Styrofoam;
paints and brushes;
sponge;
stencil for brickwork;
tape or glue.

Let's start our master class:

To begin, cut out two rectangles measuring 110x60 centimeters from cardboard of suitable density. The color of the cardboard in this case does not matter, because in the future we will decorate it. But, of course, cardboard must have smooth surface without visible damage or severe creases. It is very important!
Next, along the narrow side of each rectangle, we make perforations every 15 centimeters. Next, along this perforation, we fold a square column with a width of both sides of 15 cm and a height of 110 cm, respectively.
Let's start forming the fireplace stands. We will make them in a brick style. To do this, we draw a pattern on each of the columns that imitates brickwork. For greater convenience, we recommend using stencils. It will be easier and faster this way. You can make such a stencil yourself, or you can buy a ready-made one.
Now take another sheet of cardboard and cut out two more rectangles from it. This will be the base of our fireplace and its top. The dimensions in this case should be determined individually.
Please note that the parts we cut out and placed on brick racks (those prepared at the previous stage) must protrude on the sides. Ideally, they should be at least 2 times wider than the columns themselves.
In order to give the bases greater thickness and volume, we thicken them with polystyrene foam, and then paint the entire resulting structure (all parts) in specific color. We recommend choosing a white color to match the foam.
Now we attach the resulting racks to the bases. To do this, we use either glue or tape (whichever you prefer). However, do not forget that the fastening material should not be visible from the front of our false fireplace made of cardboard.
Now we cut out another rectangle from cardboard. This will be the back wall of our fireplace. Using a sponge, prime the resulting wall with black and gray paint. This color perfectly conveys the feeling of slightly charred walls. It will be very impressive.
After the paint has dried, paint a fire on the back wall of the fireplace, providing it with cheerful flames. Here you can use your imagination using different colors, markers, etc.
We wait for it to dry completely, after which we glue the wall to our bases and posts. All that remains is to add some dry wood to the fireplace to give it even more naturalness. In the photo below you can see what happened:

Of course, the proposed scheme of action can be supplemented by you with some other nuances and details. For example, you can paint the entire false fireplace to match the brickwork. Or even choose a different color that matches the interior of your home.

In addition, the fireplace can be decorated with various decorative elements: on the top shelf you can place vases, figurines and other New Year’s decorations. And the recess of the fireplace can be protected with a real forged fence, suitable in size. A homemade Christmas wreath will look great on the wall above the fireplace.

Professional craftsmen even make a backlight at the bottom of the fireplace, which will further imitate the burning of a flame, but this, as they say, is of the highest matters. In the videos below, you can also find a lot of useful information on this matter. Happy Holidays!

Video on the topic:

Several interesting master classes and useful tips are waiting for you in this collection of video materials.

The most interesting articles:

When finishing a false fireplace made of cardboard, the putty from the acrylic tape will crumble, and the foam or polystyrene foam moldings that imitate stucco will not stick firmly.

Also, you can make an imitation of logs using the same corrugated cardboard. A knife designed for cutting drywall. The cardboard must be corrugated and, most importantly, dense.

It is better to glue the mantelpiece using polymer glue or “liquid nails” - this way it will be securely placed on a frame structure or fireplace arranged in the form of a box.

Next, the box can be covered with brick-like wallpaper or covered with white paper on the outside and inside. Painting tape works well because it's thin, but holds the details well, and paint adheres well to it.

The last step before directly decorating the fireplace is to tape all the seams of the portal and base with tape.

They can be made from pieces of cardboard glued together.

You can use another one, but it should cut the cardboard well.

To make the “bricks” more textured, gold paint is applied pointwise to them using a sponge.

The fireplace is primed in several layers so that all parts are the same color. Next, the installation is painted brown, and the borders are painted yellow.

Water-based paint is most often used white. If you plan to make a decorative antique false fireplace, then instead of coloring compounds use regular putty for drywall.

DIY fake fireplace - creating a New Year's atmosphere

As incredible as it may sound, a decorative fireplace portal can actually be made from cardboard boxes.

As you can see, making a fireplace out of cardboard with your own hands is very simple. After installing the fireplace in the place you have chosen, you can begin decorating it with various accessories. Now you need to decide on the method of attaching the portal to the base of the fireplace.

Having prepared the elements of the fireplace, we begin by creating the base of the fireplace.

Your fireplace will consist of three main parts: the base, the portal and the top shelf.

Please note that the folds of the box can also be used rationally and are quite suitable for the corners of the fireplace.

There are very few of them, so you won’t need a large investment to create a fireplace out of cardboard.

And here we show how quickly and easily you can make a New Year's false fireplace from a cardboard box. You can place things dear to your heart on the mantelpiece. The final stage of creating a false fireplace from cardboard will be painting it with water-based paint.

It is not necessary to install an upper mantelpiece. Next, we cut out the layout of the fireplace. According to the previously prepared sketch, we draw out the details of the fireplace on the spread cardboard.

But if you want to be creative, you can construct a false fireplace made of polyurethane with your own hands from half-columns, platbands and moldings.

These could be photographs, vases, some crafts, and much more. You can make it either snow-white, or add the selected color and highlight the tone of the stucco elements. Also, in the fireplace hearth you can create an imitation of brickwork using rectangular pieces of cardboard.

This can be painted patterns or decorating the front of the fireplace by highlighting the hearth niche using thinly cut molding, after which stucco elements are also attached.

After this you can add decorative elements.

How to make a fireplace from a box with a solid back wall

Making a fireplace from cardboard boxes with your own hands is not so difficult - just find large cardboard packaging from furniture or household appliances.

This simple process will take you a minimum of time, but will wonderfully decorate your home. To create a false fireplace you will need a minimum of tools and an empty cardboard box.

You can place initialed candles in the niche of the hearth or decorate it with LED light bulbs. To create this shelf, cut out 3-4 pieces of equal size from the box.

By established sizes According to the sketch, a regular box is assembled, with a solid back wall.

We also begin by cutting out the portal panels marked on the box.

The second option is to install the portal on the surface on a completely sealed box.

If one of the adjacent walls is the side of the cabinet, then it is necessary to calculate the dimensions so that the finished structure is flush with the cabinet and does not stick out.

The thickness depends on your wishes, you can make it with a small twig or a larger log. Their width can be made the same or slightly larger than the width of the portal. Otherwise, the entire structure will collapse. When installing the top shelf, remember that its weight should not exceed the weight of the fireplace base.

But if you are going to place heavy objects on it, such as vases, for example, then just the top of the box will not be enough to hold it.

Then we install the prepared portal, securely fixing it to the base using construction tape.

The ribs can be assembled into a lattice, or they can be chaotically glued to the bottom and lid of the box.

To do this, we make a thinner tube; after the fastening glue has dried, the branch is cut into small knots, which we then attach to the logs. Next we create knots for these logs. Strips of cardboard are cut, which are then rolled into a tube.

It must be said right away that there is nothing particularly complicated in the manufacture of this decorative element, and it can be done not only by a man who has skills in construction, but also by the owner of the apartment.

It's very easy to make them. Therefore, it is advisable to make it more rigid.

How to make a decorative fireplace with imitation fire

It should be noted here that there are also several options for the portal. There may be two options here.

Having decided on the dimensions, we create a sketch where we mark all the dimensions.

Before proceeding with the actual creation of the fireplace, it is necessary to carry out a series of preparatory work. By planning everything well, you will ensure the quality of the result.

For example, you can make a fireplace out of boxes with your own hands - although it may not be able to warm the apartment, it will definitely add coziness and lift the spirits of your household.

It all depends on your imagination. We toyed with the idea of a fireplace for a very long time, went to all sorts of construction markets and stores, but since the real one was not suitable for us, we looked through the options.

Great site. Thanks a lot! Let's remember together the happy childhood of the era of developed socialism.

Fireplace made from boxes for the New Year

DIY fireplace from boxes for the New Year

Making a fireplace from cardboard boxes with your own hands is not so difficult - just find large cardboard packages.

For example, a cardboard box from a plasma or LCD TV works well. The manufacturing work will take quite a lot of time - you need to cut out the parts, paint, putty and decorate them. Nevertheless, the result will not leave you indifferent - a high-quality fireplace made from boxes with your own hands is difficult to distinguish from the real thing.

What you will need for the example below:

Large cardboard box
Foam skirting boards (curbs)
Glue type "Moment"
Decorative foam bas-reliefs
White water-based paint
Stationery knife

Preparing a fireplace from boxes with your own hands for the New Year

First, make a drawing of the fireplace - you can find examples on the Internet, look in specialized literature, or come up with your own.
DIY cardboard fireplace from boxes

Print the picture and calculate the dimensions of your product on the drawing, according to the size of your box and the space in the room.

Draw the layout on the box - use a ruler and a simple pencil so that the markings are clearly visible.
Auxiliary lines can be drawn with a pen.

Cut out a window for the fire as follows - use a stationery knife to push deep grooves into the cardboard so that the edges can not be cut off, but bent inside the fireplace.

Glue the resulting blades to the back wall of the fireplace using Moment type glue.

The preparatory stage is over.

Now you can start finishing the fireplace from boxes with your own hands. The master class continues!

Decorating a fireplace from boxes with your own hands for the New Year

Cut foam baseboards (curbs) the right size for the edges of the hearth, decorative elements - they can be bought at any hardware store. Cut the pieces at an angle of 45 degrees so that later the borders can be folded into rectangles.

Glue the elements in the marked places.

Glue decorative foam bas-reliefs in the form of angels in the center of the side elements of the fireplace.
Decorate the upper edge with a beautiful plinth, forming a future mantelpiece.

From above your product should look something like this.

Cut a shelf to the desired size from foam or other similar lightweight material and glue it to the top of your fireplace.

Painting can be done in different ways, depending on what effect you want to achieve.

If you need an aged surface with cracks, fill the entire surface with white putty and dry with a hairdryer; after drying, the surface will be covered with small cracks.

To achieve an even, smooth layer, paint the product with water-based paint in 2-3 layers.

Show your imagination - you can also decorate the fireplace using all kinds of New Year's decorations.

The fire can be made from candles or garlands placed in the hearth. You can simply print out a large photo of the fire and stick it on the back wall of your fireplace.

Such a fireplace is perfect not only for decorating any home - many photo studios use similar decorations when creating home or holiday interiors.

Fireplace made from boxes for the New Year (video)

DIY New Year's fireplace made from boxes

We often associate a fireplace with Christmas - it is with its help that Santa Claus, according to the beliefs of many Western peoples, sneaks into the house to put gifts under the tree.

Despite the fact that Santa Claus is closer to us, it doesn’t hurt to make a New Year’s fireplace with your own hands from a box. This way you can gather all your relatives near the family hearth, in literally words, on a festive night.

To make a fireplace out of boxes with your own hands, step-by-step instructions assume you have a variety of New Year's decorations for home, which are also easy to prepare yourself.

Take 3 boxes: wide and flat for the TV and 2 small rectangular ones for the speakers.
Glue them together as shown in the image. If necessary, trim the pieces to the same height to achieve the same level.

Take another cardboard box and cut out a top border for the fireplace from it, equal in length to the two sides of the workpiece and the front.

Glue the border. Decorate it on top with a patterned plinth, as in the first master class. Attach a foam tabletop of the desired size.

Cut out many rectangles with rounded ends and glue them in rows onto the workpiece with PVA glue - they will create something like bricks.

Prime the box fireplace with your own hands in 1-2 layers so that all its parts are the same color.
If this is not done, the fireplace may turn out different colors when painting.

After the primer has completely dried, paint the fireplace. brown, the baseboards on it are yellow. Alternatively, dip a scouring pad in yellow and lightly dab some paint onto the bricks to give them texture.

Decorate your fireplace with all kinds of New Year's toys, and place a luminous garland rolled into a ball in the hearth - an imitation of fire.

It will be even better if you replace the yellow paint with gold or silver - thanks to it, your fireplace will simply shine!

Material taken from MEGAPOISK.COM page

False fireplace made of cardboard: how to decorate a room yourself for the New Year holidays

Unfortunately, not everyone can afford luxurious houses and mansions with fireplaces and stoves. However, everyone wants to create a warm and cozy atmosphere in their small house or apartment. I especially want comfort and warmth when the New Year and Christmas family holidays are approaching.

We invite you to find out how you can easily and quickly make a false fireplace out of cardboard with your own hands in absolutely any room.

Basic tips and recommendations before starting to design an indoor fireplace

Before you begin any actions and manipulations to make a decorative fireplace in your room, you need to plan and prepare everything you need.

Determine the future location of your cardboard fireplace.
It would be best and more practical to place it along a large and free wall in your house or apartment. With this arrangement, this decorative element will look advantageous and impressive.
Decide on the desired dimensions of the cardboard fireplace. Do everything necessary calculations and measurements.
For convenience in the future, draw detailed drawing your future cardboard building.
Prepare in advance all the materials necessary for making a fireplace.
Collect large cardboard boxes from household appliances. It will be much easier and more convenient for you to work with such materials.
To glue the parts and corners of the structure you will also need a large number of PVA glue, as well as masking tape.
Think it over appearance your fireplace made of cardboard. If necessary, stock up on moldings, corners, wallpaper, paints or other decorative elements.

A simple option for making a wall-mounted fireplace with your own hands

We offer affordable and detailed master class on making a cardboard fireplace to decorate a room for the New Year.

Take a large sheet of thick cardboard and cut it out according to the pre-designed template.

The entire structure must be cut out. The foundation of your future fireplace should be made strong and reliable. For this purpose, use stiffening ribs, which are placed inside the cardboard frame of the false fireplace.

The base of the structure should be larger than the false fireplace made of cardboard itself, by about ten centimeters. More accurate calculations need to be made.

There are two main ways to make the base for a fireplace structure:

Cut out cardboard material with small sides, and use PVA glue to glue the stiffeners.
Cut two panels to the required size.
One will act as a surface, and the second as a bottom, onto which the stiffeners are also glued.

New Year's fireplace made from boxes: quick and simple, beautiful for a long time, and even with real fire

Cut out the marked cardboard and cut it out.

First you need to form the front part in order to attach the frame to it.

On the cut box it is necessary to mark the window for the fireplace. It should be cut using a stationery knife.

The doors should be bent inward.

You also need to cut out a rectangle from cardboard that will act as a ceiling. It is secured with molar tape. The portal is secured from the inside using frame panels.

After this, you need to glue the prepared cardboard onto the gratings. The decorative portal is installed on the prepared base and secured with PVA glue or tape.

If necessary, the craftswoman can cover the frame with wallpaper or paint it.

The most important and final stage is decorating the completed fireplace structure.

Try to reproduce the design of stones or brick laying. Use thin molding to divide the fireplace into several separate zones and sections.

Stucco elements glued to the structure using liquid nails look interesting and original. Columns placed on the sides will give your cardboard fireplace a noble and finished look.

On finishing stage All decorative elements must be coated with white water-based paint.