Alternative treatment with living and dead water is becoming increasingly popular. This method seems to have come to us from Russian fairy tales. In fact, a liquid with medicinal properties is formed as a result of electrolysis. In this article we will look at how treatment occurs, and also cover the topic of “living water - preparation”.
What does living and dead mean?
Dead water is acidic, its electrical potential is positive. Living water is a negatively charged liquid and has a pH greater than 9, meaning it is alkaline. Both types of water are used in alternative medicine. Treatment takes place with living and dead water.
Effect on the body
What are the benefits of living water?
Living water stimulates vital processes in the body:
- Rejuvenates the body
- Boosts immunity
- Accelerates metabolic processes
- Heals wounds
Properties of dead water
The properties of dead water are also very valuable:
- Good disinfectant
- Has a bactericidal effect
- Relieves colds
- Eliminates fungus
Treatment with living and dead water has become popular because its scope of application is quite wide. Next, we will consider such an issue as living water - preparation and the necessary equipment for this.
What do you need to have?
To prepare the required water, special activator devices are sold. You can make them yourself at home. What you will need for this:
- Water. Ideal option There will be spring water, but not everyone can find it, so regular tap water will do. It needs to be left for 24 hours.
- Two glass mugs
- Two stainless forks
- Bandage and cotton wool
- 20 W lamp.
- Wire with plug
Most homes have these items. If something is missing, you can buy more.
Living and dead water - preparation
To prepare living water you need to perform quite simple manipulations:
- Place the forks in the cups with the tines facing up;
- Attach a diode to one of the plugs, the end of which is connected to the wire;
- You can make the system stronger by using electrical tape;
- Attach the free end of the wire to plug 2.
Ready. Now all that remains is to plug the plug into the outlet. Place the diode against the lamp. If the lamp is on, then everything is done correctly. Turn off from the network. Now prepare a “bridge” for the ions - wrap the cotton wool in a gauze bandage.
Fill the cups equally with water and place a cotton wool bridge so that it connects both cups. That's all. You can now connect the system to the network. After 10 minutes you will have ready living water.
Results
After disconnecting the system from the network, remove the bridge. In the cup to which the diode was connected, the water will be dead, since there is a positive charge there. In the other, living, negatively charged water.
We remind you that plugs should be removed from the water ONLY after disconnecting the device from the mains. Otherwise you will get an electric shock.
So very simply, you can build a system yourself at home and carry out treatment with living and dead water.
Preparation of melt water
Freezing water also produces a very useful liquid. It is not living water, as some say. Read more in the article: But she also has a number of useful properties and from it you can make living and dead water.
To prepare the water, you need to let it sit for 24 hours, or clean it with a filter. What's next:
- Heat the water without bringing it to a boil. This will eliminate some harmful compounds.
- Cool the liquid at room conditions temperature.
- Neutralization of water from deuterium. Throw away the first ice that forms during freezing; it will contain this dangerous isotope, since it freezes at more high temperatures first.
- The liquid is sent back to freezer. It freezes and looks like this: transparent at the edges, white in the center. Pour boiling water over the white part and remove. It will contain harmful substances. Transparent ice melts and you can use it for drinking.
- Melting should occur at room temperature. The resulting water can be drunk, and you can also wash your face with it. When boiled, such water may lose its medicinal properties, so you shouldn't do this.
Recipes for treatment with living and dead water.
Here are some recipes for how to treat with living and dead water:
- Allergy. Gargle with dead water after every meal for three days. 10 minutes after rinsing, drink about half a glass of live water.
- Constipation. Drink half a glass of living water.
- Skin rashes. Wipe your face with dead water for about a week.
- Angina. Gargle with dead water ten minutes before eating. Afterwards, drink a quarter glass of living water.
- Diarrhea is treated with half a glass of dead water. If it doesn’t help, then you can drink the same amount in an hour.
- Liver diseases and their treatment with living and dead water. The first day, drink half a glass of dead water 4 times. Then for the rest of the week, take half a glass of living water and the same number of doses.
- Migraine goes away after drinking half a glass of dead water.
- Gastritis. Half an hour before meals, drink living water as follows: a quarter glass on the first day, half a glass the following days. Course – 3-7 days.
- Pressure. If your blood pressure is low, then drink half a glass of living water 2 times a day. If the pressure is high, then use dead water. Don't drink for more than a week.
To prepare “living” and “dead” water you must have:
1. Water source.
2. Water filter: type " ZEPTER ", or "AQUAPHOR", or a regular jug with a replaceable filter, or some other at your discretion.
3. A three-liter bottle, inside of which 100 - 150 grams are placed. The mineral flint, which contains the element “silicon,” can be used and shungite. These minerals can be purchased at the Esoteric store in the city and also a mineral or semi-precious stone corresponding to your zodiac sign. (For example, I have a rock crystal or quartz crystal).
Flint is, as a rule, a mineral-organic formation, which contains opal and chalcedony - amorphous and cryptocrystalline varieties of quartz. The basis of these mineral components of flint is silica - silicon dioxide SiO2. The chemical element silicon, which is part of flint in the form of dioxide, is one of the most common substances in nature. Most of The earth's crust consists precisely of compounds of this most important chemical element, and silicon is also an integral part of many organs and tissues of the human body. In addition to silica mineral composition flint contains more than 20 chemical elements, including Ca, Mg, P, Mn, Cu, Zn, etc. Thanks to the oxides of manganese and iron present in the composition, flint often has a very diverse color, in which shades of black, red and yellow color. And it is precisely with the unique mineral-organic composition of flint that its ability to activate water and endow it with a variety of healing properties is associated.
4. A refrigerator in the freezer compartment of which there is space for a plastic container with water.
5. A plastic 2-liter container with a lid for installing it in the freezer. (Glass container is not suitable).
6. Electric activator for receivingof “living” and “dead” water, which I made myself. Appearance activator is shown in the photo. It consists of the following components:
Two electrodes made from food grade of stainless steel size: 40mm wide, 200mm long and 1mm thick. A hole with a diameter of 6 mm for an M6 bolt was drilled 10 mm from the edge of the plates. After another 10 mm, the plate bends in the shape of the letter “G”. The plates can be purchased at the Starokonny Market in Odessa. Food-grade stainless steel can be distinguished from technical stainless steel using a conventional magnet - the magnet does not stick to food-grade steel, since it does not contain nickel. (By the way, according to some studies, the ingestion of increased doses of nickel into the male body causes the appearance of prostatitis and prostate adenoma. Guys!!! Check your spoons and forks!!! No wonder our ancestors used silver cutlery!!!);
Mounting box in which the brand diode bridge is installed KBU 1010, (can be purchased on the Radio Market), intended for conversion alternating current voltage 220 volts D.C. the same voltage. In the installation box, the diode bridge is mounted on a patch strip of 4 contacts and two electrodes are connected. The spring view of the installation is clearly visible in the photo. The wires going to the plug, which will be connected to a 220 Volt power outlet, are connected to the “A C” contacts. One stainless steel electrode “cathode” is connected to the “-” contact - where “living” water (alkaline) will be formed, and a second stainless steel electrode “anode” is connected to the “+” contact - where “dead” water (acidic) will be formed. . A tarpaulin bag is placed on this electrode - a reservoir for collecting “dead” waste.
yes.
A reservoir for collecting “dead water”, which is a simple bag made from an old tarpaulin fire hose sleeve. (You can sew it yourself using canvas mittens). A tarpaulin is mandatory - it does not allow “living” and “dead” water to mix.
After making the activator (if it is not possible to make it yourself, you can buy the activator via the Internet, its cost is in the range of 500-700 UAH) we proceed to a simpler operation - obtaining living and dead water. For this:
- Pour purified water into a three-liter bottle with minerals and leave it for at least 1 day.
- We go into the kitchen in the evening, usually before going to bed, and into a prepared 2-liter plastic container, pour the water infused with minerals and put it in the freezer for a day or even two. It is advisable to remove the container with water after 3 or 4 hours (or in the morning) and collect a thin 1-2mm layer of ice from its surface. This is the frozen so-called “heavy water” - deuterium, which is considered harmful to humans. After this, the process of freezing water continues.
- We go into the kitchen again in the evening, usually before going to bed, and take out frozen water from the freezer. The plastic container should contain only ice, and it will be transparent at the edges of the container and slightly cloudy in the middle. The cloudy part of the ice must be washed with a hot stream of water from a tap or kettle. Remaining part clear ice Leave in container to defrost overnight.
In the morning you get the so-called “melt water”, which you pour into an empty three-liter bottle, put the activator into it along with a bag for dead water (after having also poured melt water into it), plug the activator into an electrical outlet and maintain the activation time for 5 – 10 min. The readiness to receive “living” water can be roughly determined by hand by the temperature on the surface of the bottle - it should not exceed 30 -37 degrees Celsius.
ATTENTION!!!
FOR SAFETY PURPOSES, DO NOT REMOVE THE ACTIVATOR FROM THE BOTTLE WHEN IT IS Plugged In.
AFTER ACTIVATING THE WATER, FIRST, DISCONNECT THE POWER TO THE ACTIVATOR BY PULLING THE PLUG FROM THE SOCKET!!!
And this information is for the curious (from the site http://vital.in.ua).
Physics of the water activation process
When a potential difference is applied, the volume of water between the electrodes is affected electric field, and an electric current begins to flow through the electrolyte.
Electroactivation of water is based on the transfer of ions and electrons through a semi-permeable membrane placed in an electrolyte solution, creating a potential difference in the liquid on both sides of the membrane. During the process of electroactivation in the cathode chamber, catholyte is obtained - alkaline (“living”) water, in the anodic chamber - anolyte, acidic (“dead”) water.
In the cathode chamber, water is enriched with highly active reducing agents, which leads to the formation of insoluble metal hydroxides, which precipitate:
Men+ + nOH– → Me(OH)n
Light metal hydroxides (Na, K) do not precipitate and remain dissolved - 100%.
In addition, direct reduction of multiply charged cations occurs in the cathode chamber (i.e., precipitation of metal molecules):
Men+ + ne → Meо.
These processes reduce the toxicity of water caused by the presence of heavy metal ions many times.
Water electrical activation circuit
K – cathode; A – anode; Мen+ – metal ions;
M – semi-permeable membrane;
1 – cathode chamber; 2 – anode chamber.
In the anode chamber, water is saturated with highly effective oxidizing agents. It is known that of all the processes of destruction of organic substances in water, the most powerful is electrolytic oxidation at the anode. Gases formed during electrolysis (destruction of microorganisms, decomposition of salts) and gases dissolved in water (CO2, SO2, NO2, N2, H2S, Cl2, O2, H2) evaporate in the near-electrode zone.
High Redox potential and special forms active chlorine compounds formed at the anode and participating in oxidation reactions eliminate the formation of toxic organochlorine substances and ensure complete oxidative destruction of dioxins (C12H4O2Cl4).
During the electrolysis of water with an inert anode (graphite, Ecosil), oxidation and reduction of water molecules occurs on the electrodes according to the reactions:
at the cathode 2H2O + 2e → H2 + 2OH–,
2H2O + 2Na+ + 2e → 2NaOH + H2.
at the anode 2H2O – 4e → O2 + 4H+.
If cyanide is present in water, the process of oxidation with ozone occurs:
NH2CONH2 + O3 → N2 + CO2 + 2H2O.
Ozone oxidizes ferrous iron and manganese:
Mn2+ + O3 + H2O → MnO2 + O2 + 2H+;
2Fe2+ + O3 + 3H2O → 2Fe(OH)3,
Antioxidants (or rather, electronic antioxidants) are the most important vitamins E, C, PP, K and a number of vital substances included in food products; the resulting ferric iron precipitates in the form of hydroxide.
Lead tetraethyl Pb(C2 H5)4 is also oxidized:
Pb( C2 H5)4 + 2 O3 → PbO2 + 4 CH3 CHO.Highly active oxidizing agents attack organic compounds and lead to their complete destruction (including nitrates, nitrites, herbicides, pesticides). For example, chlorophenol breaks down according to the reaction:
C6H5OCl + 26OH→ 6CO2 + 15H2O + HCl
Due to the saturation of the cathode chamber with hydroxyl groups OH-, alkaline water is obtained here, and the anodic chamber with hydrogen ions H+ - acidic water .
So, you have received special and healing “living” water.
WHAT IS THE SPECIFICITY AND HEALTHICALITY OF “LIVING” WATER AND WHAT PARAMETERS SHOULD BE CHECKED TO BE SURE OF ITS USEFULNESS?
“The operation of the device is based on the principles of wave superposition, i.e. interaction of the spectral components of impurities and the information carrier in antiphase, due to the fact that the phase of oscillations of the spectral components of impurities is determined with small fluctuations (~10 degrees) relative to the phase of oscillations of the same components of the information carrier.”
Did you understand anything??? Well,... of course... the principles of wave superposition... are known to everyone - this is... “quite simple”, and the rest is some kind of “nonsense”. I took this from a site offering “Akvadisk” for “structuring” water. It is assumed that after using such a disk we will receive “living” water. I leave the use of such a disk to the conscience of the “inventors”, since I believe that instead of “structured” water we will get “akhinized” water. Well, that's just for humor.
But still, how to answer the question posed above?
There is a lot of information about the usefulness of “living” water on the Internet, and not only, and you, if you wish, can verify this.
I will briefly outline the main generally accepted properties of “living” and “dead” water:
- "LIVING" WATER(catholyte, alkaline water, biostimulant) - very soft, colorless liquid with an alkaline taste, pH = 8.5-10.5. During activation, precipitation falls in it - all the impurities of water, incl. both radionuclides and water are purified. It retains its properties for several days when stored in a closed container.
This water is an excellent stimulant, restores the body's immune system, provides antioxidant protection for the body, especially in combination with the use of vitamins, and is a source of energy. It is not for nothing that it was called “living” water. It activates the body's bioprocesses, normalizes blood pressure, improves appetite, metabolism, food passage, and overall well-being.
It quickly heals various wounds, including stomach and duodenal ulcers, bedsores, trophic ulcers, burns. This water softens the skin, gradually smoothes out wrinkles, destroys dandruff, makes hair silky, etc.
In “living” water, wilted flowers and green vegetables quickly come to life and are preserved for a long time, and seeds, after soaking in this water, germinate faster and more easily; when watered, they grow better and produce a larger harvest.
"DEAD" WATER(anolyte, acidic water, bactericide) - colorless liquid with an acidic odor, sour, astringent. Its pH = 2.5-3.5. It retains its properties for 1-2 weeks when stored in closed containers.
"Dead" water is an excellent bactericide and disinfectant. You can rinse your nose, mouth, and throat with it during colds, during flu epidemics, after visiting infectious patients, clinics, and crowded places. It can disinfect bandages, linen, various containers, furniture, even rooms and soil.
This water lowers blood pressure, calms the nerves, improves sleep, reduces pain in the joints of the hands and feet, has a dissolving effect, destroys fungus, very quickly cures a runny nose, etc. It is useful to rinse your mouth after eating - your gums will not bleed and the stones will gradually dissolve.
And now about the parameters that will confirm that you have received “living” or “dead” water and how to control them? And even at home?
I am not going to conduct a general analysis (list the main criteria and standards) of drinking water quality indicators according to data from organizations such as the World Health Organization (WHO), the European Union, and the State Committee for Sanitary and Epidemiological Surveillance Russian Federation, State Sanitary and Epidemiological Service of Ukraine. This is a separate and large work, however, based on the publications and information known to me, I chose three “home” indicators of drinking water and “living” and “dead”, namely:
1. Hydrogen y p indicator (pH) is one of the most important indicators of drinking water quality.Depending onchanges in the pH level of water changes the rate of biological reactions, the toxicity of pollutants, and the degree of corrosionno aggressiveness of water, etc. For drinking water, according to WHO, the optimal pH fluctuates in the range 6.5 - 8.5 units. I control this indicator with this portable pH device - a pH meter (brand pH-025) with mandatory calibration in a special standard solution.
2. Total mineralization (TM)– a general quantitative indicator (the content of various minerals and salts in drinking water. WHO, as a maximum upper limit, established an indicator in 1000 m
G/
l, taking into account that the indicator total mineralization fluctuates forever depending on the characteristics of drinking water sources. I control this indicator with this portable device “salt meter” (brand COM 100) with mandatory calibration in a special standard solution.
3. Redox potential drinking water (Eh). By the way, our Sanitary and Epidemiological Supervision laboratories do not perform this analysis, even when monitoring the quality of drinking water at water intakes and distribution networks in populated areas. There is a preconceived notion that it is not necessary. It is not included in GSanPiN 2.2.4-171-10 (GSanPiN 2.2.4-400-10) “Hygienic requirements for drinking water intended for human consumption” and other SES documents. Which is very bad. While the World Health Organization (WHO) recommends drinking water with ORPnot higher than+50mv. In Ukraine, this condition is not met anywhere, and the ORP parameter (Eh) is not controlled anywhere. Well-known biochemist scientists suggest drinking water with ORP within the interval from plus 100 to minus 150mv.
I monitor this indicator with this portable device “ORPmeter” (brand ORP-169 E ) with mandatory calibration in a special standard solution.
Redox potential ORP (Eh or Redox potential) is a measure of the chemical activity of elements or their compounds in reversible chemical processes associated with a change in the charge of ions in solutions. Such processes are called oxidation-reduction reactions and are caused by the donation of electrons by one substance and the receipt of them by others. ORP (Eh) values are expressed in volts (millivolts) with a positive (+) or negative (-) value. A little complicated, but... read on!
(Website “About Water” Mosin. O.V., Ph.D.) “And now the most important thing... ORP, like pH, is the most important characteristic of the internal environment of the human body, since it is directly related to the processes of life and metabolism. The norm of the internal environment of the human body is considered to be ORP from -100 to +200mv. The internal environment of the body is in a weakly oxidized and reducing environment. But the ORP of ordinary drinking water, which flows from the tap in an apartment, very often ranges from +170 to +350 mv. These differences in the ORP of the human body and drinking water often vary greatly. Waters close to the body's ORP are considered optimal. In this case, the electrical energy of the body's cell membranes is not wasted on correcting the activity of water electrons. Water is almost immediately absorbed by the body, since it is biologically compatible with the body in this parameter. The energy of cellular membranes is the highest level energy, which is the end product of the biochemical chain of nutrient transformation."
Water with ORP from +50mv to -100mv Due to its restorative properties, it normalizes the redox balance in the body, thereby:
normalizes the microflora of the gastrointestinal tract by stimulating the growth of its own normal microflora (bifidobacteria and lactobacilli) and suppressing pathogenic and opportunistic microflora, including Staphylococcus aureus, Salmonella, Shigella (dysentery), Aspergillus, Listeria, Clostridia, Pseudomonas aeruginosa, Helicobacter pylori (which is considered the main cause of peptic ulcers);
suppresses candidiasis (thrush) in the gastrointestinal tract and mucous membranes;
restores and activates the immune system in people with weakened immune systems and after immunosuppressive therapy, including after exposure to radiation and chemotherapy;
has powerful antioxidant properties;
has antimutagenic properties;
restores the detoxifying function of the liver;
has hepatoprotective properties;
has wound healing and anti-inflammatory properties;
has high antiviral and virucidal properties against the hepatitis C virus, genital herpes and herpes simplex virus type 1 (better known as “cold sores”);
has antiviral and virucidal properties against the influenza A virus, the most common influenza among people.
According to Russian and foreign scientific publications, in addition to the above properties, water with a negative redox potential:
helps eliminate infectious and inflammatory manifestations of prostatitis;
stimulates the processes of growth, physiological and reparative regeneration;
has an antispasmodic effect in renal colic;
has an antiseptic, diuretic (diuretic) effect;
influences the regulation of growth processes and activity of cells of all types of tissues;
is a biostimulator for the restoration of liver tissue;
normalizes metabolism;
causes a general anabolic effect;
is a general tonic for fatigue, asthenic conditions and for weakened patients;
helps reduce swelling and reduce arterial hypertension, reduces the intensity of allergic reactions and dermatoses, reduces osteoarticular pain;
is a means of preventing cancer;
reduces the need of a diabetic patient for insulin;
increases the activity of tissue respiration enzymes;
reduces the risk of disease coronary disease hearts.
Does everyone understand the purpose of “LIVING” water?
Then make it and drink to your health!!!
“Maybe sprinkle it first with dead water and then with living water, huh???”
Almost no therapy will be effective without the use of water in one form or another. Water itself has unique properties and can enhance the effect of many drugs.
For several decades, activated liquid, which is obtained using electrolysis, has been used to treat many diseases. Depending on the processing method, living (catholyte) and dead water (anolyte) are distinguished.
Has healing properties living water, preparation which is possible even at home. The dead one is used in complex therapy and is used as a disinfectant.
After reading the article you will learn:
The benefits of living water
Science has proven positive the influence of living and dead water on living organisms. This is due to its alkaline properties. Catholyte has a large number of negatively charged particles and a slightly alkaline environment. Anolyte is characterized by the presence of positively charged particles and an acidic environment with a low Ph.
Catholyte is considered healing liquid. The healing properties of living water used to get rid of various diseases. Its action is expressed as follows:
- stabilizes blood pressure;
- increases immunity;
- helps cleanse the body of waste and toxins;
- improves the functioning of internal organs.
At constant exposure to living water There is an improvement in the condition of such serious diseases as stomach ulcers, osteoporosis, and psoriasis. In addition, the liquid is used in cosmetology. Its regular use allows you to cleanse your facial skin and make your hair shiny and soft.
Dead water is more often used to disinfect surfaces and treat skin inflammations.
Industrial devices for preparing living water
Today there are dozens of modern models to activate the liquid. Main in the use of devices is the device device. Typically, the equipment body is made of plastic, the wires are metal. When using platinum or gold, the cost of the activator increases, but the quality of the device is higher.
Most devices today activate both living and dead water, and operate from electrical network. The process itself takes half an hour. The average cost of a high-quality device is 4 – 5 thousand rubles. In the presence of additional functions, such as cleaning fluid, the price may be slightly higher.
Do-it-yourself living and dead water apparatus
If you do not want to spend money and are confident in your abilities, use the instructions, how to make living water at home. The device has enough simple design. To make the device you will need:
- glass jar;
- thick fabric;
- two wires.
From a piece of fabric that does not allow liquid to pass through, it is made small bag and put it in a jar. It must be tightly secured. It is better to take wires from stainless steel. The first is placed in a jar, the second in a bag. The electrodes can be secured using a nylon cover. The opposite ends are powered from the electrical network, after which water is poured and the device is turned on.
You can use a different assembly scheme. In this case, not a fabric bag is used, but two containers. They must have straight edges, so jars are not suitable for this purpose. The electrodes are placed in different containers, and contact is ensured between them. The device will produce two types of liquid at once - catholyte and anolyte.
Living water at home It may take a little longer to prepare, but the quality will not be inferior to that obtained using a store-bought device.
Unconventional ways to obtain living water
The healing liquid can be obtained without the use of activators. It may not be as effective, but it will have an effect on certain diseases. At home you can prepare catholyte using freezing recipes. Cooking living water in several ways:
- Freeze the water in a saucepan. It is better to use purchased bottled water or purified water using a filter. Fill the pan full and place it in the freezer. Wait until a thin layer of ice forms on the surface and remove it. Then pour the water into another container and put it back in the freezer. This time, wait until two-thirds of the total volume has frozen. Drain any water that has not frozen. The remaining ice is the same catholyte.
- If you don't have much time, you can use more in a fast way. Pour the liquid into a glass or ceramic glass and place it in the freezer. When the water turns to ice, remove it from the glass and rinse cold water. Then leave the ice at room temperature and let it melt 2/3 of the way. This will be activated water. Discard the remaining ice.
When frozen, the impurities that are harmful to humans are the first to freeze. After such procedures, the liquid receives healing properties.
In order for catholyte to bring maximum benefit, use tips for improving your life water. The main rule is that activated liquid cannot be stored for a long time. It is best to prepare it immediately before use. If you activated the water 2 days ago, prepare a new one, since the alkaline environment has already changed and the solution is unlikely to benefit the body. You can store anolyte a little longer, but only in a tightly sealed container.
Do not forget that during hydrotherapy you need to follow certain rules:
- if you use both catholyte and anolyte, take a two-hour break between their use;
- in between you can drink compote or tea;
- use activated liquid for prevention, this will improve the condition of the body.
Using living water
Do not drink cold solution. Before use, it must be warmed to room temperature. However, you should not put the liquid on the stove, much less bring it to a boil. It is better to let it warm up under normal conditions to preserve its beneficial properties. Drinking living water depends on the diseases it is intended to cure.
Malakhov purification system
The popular healer is confident that with the help of an activated solution you can cure almost any disease and rid the body of toxins. Recipes by Gennady Malakhov:
- for liver problems, the healer advises taking 2 tbsp orally every 20 minutes. living water, and before going to bed drink another half a glass of dead water;
- joint diseases can be healed with anolyte compresses. They are applied to the site of inflammation for 20 minutes;
- The system of cleansing the body includes fasting, during which you can only drink activated water. You need to drink 3 tbsp. catholyte every half hour in the first half of the day, and in the second half - drink anolyte according to the same scheme. You can drink boiled water before going to bed. This scheme is followed throughout the day.
Dentistry
To treat diseases of the oral cavity such as stomatitis, periodontal disease, and dental stones, you need to rinse your mouth with an activated solution after each meal. It is also recommended to use charged water rather than regular water when brushing your teeth. If the procedure is carried out regularly, you can get rid of the unpleasant manifestations of the disease in a couple of days.
Ophthalmology
If barley, conjunctivitis and other inflammatory processes appear, you need to wash your eyes with warm anolyte. After this, compresses are made with catholyte. Treatment is carried out until the symptoms disappear.
Gastroenterology
The charged solution is used in complex therapy for gastritis, gastric ulcer and duodenum and inflammation of the gastrointestinal tract. Living water helps reduce acidity and improves appetite.
Contraindications
There are practically no contraindications to the use of activated liquid. The alkaline solution is used with caution for diseases of the genitourinary tract and for diabetes mellitus. Before use, it is better to consult a specialist.
You can choose an activator from a large number of devices on the market. In this case, there will be more confidence in the quality of the resulting solution. However, your home device will serve you faithfully. Do not forget the main rule when using living and dead water - treatment or prevention must be carried out on an ongoing basis.
Remember how in the old Russian fairy tale: in order to revive the hero you need to sprinkle him with “dead” water, and then give him “alive” water. Today, “living” and “dead” water is not fiction or science fiction. Of course, that in literally It is impossible to revive or kill someone with the action of such water, but such water does have healing properties.
"Living" water Alkaline water is considered (pH = 10-11 units). Water softens the skin, has healing properties, has a rejuvenating effect, removes allergies, and makes hair silky and healthy.
"Dead" water acidic (pH = 4-5 units), has good bactericidal and disinfectant properties, is used to rinse the mouth, throat and nose for colds, lowers blood pressure, destroys eczema, fungus, lichen, helps with diarrhea.
You can make a device for obtaining “living” and “dead” water with your own hands. To complete this task you will need:
2 stainless steel electrodes;
Canvas bag;
Glass container (jar);
Diode rectifier bridge for converting AC voltage to DC;
Power cord with plug;
Plastic cover.
1. To make a tarpaulin bag you will need a non-rubberized tarpaulin, you can use a fire hose (50 mm in diameter). The length of the bag should correspond to the height glass jar, into which it will be inserted. From the cut off required length tarpaulin, make a bag. To do this, one side (the bottom of the bag) is sewn up with a piece of the same tarpaulin or a piece of food-grade plastic is inserted, as in our case.
2. Then two electrodes (25x125x2) are made from stainless steel grade 44 NTHYU.
3. Insert the electrodes into the plastic lid (you can use a regular plastic lid for jars). In this case, the lid from a plastic coffee maker was used. The distance between the plates is 40 mm.
4. To the electrode plates, according to the diagram shown in Figure 1.
Fig.1 Principal and structural scheme device for “living” and “dead” water.
Connect the diode rectifier bridge, marking the plus (+) and minus (-) outputs on the plate; for safety reasons, you need to cover the bridge with a lid.
Every person dreams of a long and happy life, which is not overshadowed by various ailments. And traditional medicine has always sought to fulfill this desire. She has accumulated vast experience in studying medicinal plants and many recipes have been created to relieve various diseases.
One of the proposed traditional medicine The miracle cure is water, which is called living and dead. Do you remember how in fairy tales, when they used this method to resurrect a dead hero? First he was sprinkled with dead and then living water.
History of application
The gifts of nature have long been used by man in medicinal purposes. One of them that deserves special attention, - “life-giving water.” Even in ancient manuscripts, researchers found a mention that during his military campaigns along the mountain ranges of the Pamirs, Caucasus and Tien Shan, Alexander the Great found a source of healing water. He collected the liquid into a jug, but his daughter stole it and poured it on herself. As a result of this, she became invisible and immortal.
There is also information that many Popes, Chinese emperors and others the mighty of the world This is why expeditions were organized in search of an elixir that would allow one to obtain immortality. All these fairy tales and legends are clear confirmation that our ancestors knew about the existence of living and dead water.
Sources
Today you can make living and dead water with your own hands. And in ancient times, people took it from natural sources.
The dead one was in stagnant lakes and swamps. This liquid was not consumed internally. It was used only by healers for various external potions. The water of mountain rivers, glaciers and waterfalls is considered alive. It was drunk and also used in the preparation of various medicines.
Modern research
Today, to obtain healing liquid there is no need to search for its sources. To do this, it is enough to make a living and dead water apparatus at home. When used as a result of hydrolysis, so-called activated water is obtained.
Soviet scientists were busy studying the properties of this liquid back in the 80s of the 20th century. However, the results of all experiments and experiments were simply kept secret for the general public. However, everything secret sooner or later becomes clear. After some time, doctors and traditional healers learned about the results of the experiments. And here the work of Western researchers played a big role. Their results could be read in published scientific articles.
Research has proven that living water, also called catholyte, becomes negatively charged due to hydrolysis. This transformation helps it obtain high regenerating and immunostimulating properties. This makes it possible for a liquid that has undergone the hydrolysis process to become healing and be used to get rid of many ailments.
The unique properties of such water were confirmed by the USSR Pharmacological Committee. At the same time, it was said about its absolute harmlessness not only for external, but also for internal use.
The water that accumulates near the positive electrode after electrolysis is called anolyte. Its unique properties have been known to traditional healers since time immemorial. Thanks to this water, people managed to escape from rotting wounds and bedsores.
Obtaining healing liquid
In order to get activated water, you do not need to look for some distant and sometimes inaccessible sources. To do this, just open the tap and use a special device.
Based on the basic concepts of chemistry, living water has alkaline properties. They contribute to the healing effect. The properties of dead water are acidic. That is why it exhibits a disinfecting effect.
Electric current, when passing through ordinary water, radically changes its internal structure. At the same time, it erases harmful environmental information contained in the liquid. After such treatment, the water is divided into living and dead. Moreover, each of these two fractions has medicinal qualities.
Experiments on the use of activated liquid
The first apparatus of living and dead water in our country was invented by N. M. Kratov. The idea of creating this device did not come to the author by chance. In 1981, Kratov was treated in hospital. There he was diagnosed with prostate adenoma. Simultaneously with this pathology, he suffered from an inflammatory process in the kidneys. The course of treatment in the hospital lasted for a month, but did not bring any tangible results. That is why doctors offered Kratov surgery. He refused surgery and was discharged home.
At the same time, Kratov’s son suffered from a long-term non-healing wound. And the author, who created the apparatus of living and dead water, began to test the properties of the healing liquid on the affected area on his son’s skin. The results were not long in coming. The wound healed within two days. Such success inspired the inventor. He began to take this water himself, and soon his health improved. Along with the adenoma, radiculitis and leg swelling went away.
Application area
In addition to Kratov, the healing properties of such water were studied by G.D. Lysenko, as well as whole line authors. As a result of the research, it became obvious that water, both living and dead, can save a person from almost fifty types of various diseases, starting with tonsillitis and ending with stomach and duodenal ulcers.
This list also includes such common diseases as colds and flu, runny nose and radiculitis, hypertension, etc.
Making at home
In order to use the healing liquid, it is enough to make a device of living and dead water with your own hands. Of course, such devices are not difficult to find on sale. Buying and delivering them will not be difficult.
However, the purchased apparatus for obtaining living and dead water, when examined in detail, has a rather simple design. This makes me think about saving money. After all, the price of such a device is not so low. It is much easier to make a living and dead water apparatus with your own hands. It will only require a little time and a small amount of materials. The skill of our masters is always present.
Main details
In order to build a living and dead water apparatus with your own hands, you will need:
Glass jar;
- diode bridge that rectifies the mains voltage;
- a bag made of waterproof fabric;
- two electrodes;
- power cord.
With help skillful hands all these details can easily turn into homemade apparatus living and dead water.
Electrodes
This part must be made of food grade stainless steel. Salad bowls left in the house from Soviet times are perfect for this role. But if they are not there, then any utensils made from stainless steel will do. A graphite rod can be used for the anode.
If the apparatus for preparing living and dead water is assembled using a half-liter jar, then the length of the electrodes should be 100 mm. However, this volume can be increased. In order to create a device for living and dead water with your own hands, you can take a three-liter jar. In any case, the electrodes can be extended. Their size should be such that the distance between the metal and the bottom of the glass container is at least 5-10 mm.
Stainless steel sheets suitable for the manufacture of the anode and cathode should be 0.8-1 mm thick. Some craftsmen claim that they created the apparatus for making living and dead water using aluminum electrodes.
Pouch
This part will be needed to separate the resulting water fractions. As a rule, a tarpaulin is used to make a bag. This could be a piece from a fire hose or a gas mask bag. But in any case, the material for the bag should not contain any impregnation. In order to ensure that there are no foreign substances, the prepared piece must be placed in water and boiled. The components used in impregnation will manifest themselves when heated.
The length of the finished bag must be in full accordance with the height of the glass jar used to create the apparatus. When cutting this part, cut off the required length of the tarpaulin. The bottom of the bag is sewn up with a piece of the same material or food-grade plastic is inserted.
Device assembly
The diagram of the apparatus that receives living and dead water is quite simple, and you can familiarize yourself with it in the article. To assemble the device, a U-shaped cut is made on the positive electrode. It is necessary to place a cloth bag on the anode. It will collect dead water. There is no need to make such a cut on the cathode.
Both electrodes are attached to the jar using an ordinary nylon lid. However, here it is worth using one trick. Due to the fact that such covers have little mechanical strength, it is best to attach the electrodes to them using an insulating sealing gasket. This will avoid unpredictability of their behavior during work. Such gaskets are made of fiberglass (without foil) or any plastic. This part has the appearance of a rectangle with rounded ends. Two holes are cut out on it, the diameter of which coincides with the diameter of the electrodes. The gasket is installed on plastic cover. During operation, when living water and dead water are formed, the device releases gases from the liquid. For their exit, an additional hole is provided in the lid.
Next, a rectifying diode bridge is attached to the electrodes. It is important to mark the positive and negative outputs to the plate (“+” and “-”). For safety reasons, the bridge can be covered with a lid. When using a threaded diode, the thread must be attached to the positive electrode.
There is another way to assemble a similar circuit. It can be performed with a rectifier bridge. In this case, living and dead water will be produced even more intensively. The device (reviews from craftsmen confirm this) will become four times more powerful. Accelerating the process of preparing healing liquid is especially important when using it systematically.
A power cord with a plug is connected to the diode bridge. Its length must be at least 500-700 mm. It is important to isolate all exposed electrical connections, because for the process that results in living water and dead water, the device consumes AC voltage at 220 V. Next, the electrode, which is marked with a minus sign, is placed in a tarpaulin bag, water is poured into the jar, and the whole structure begins to work when connected to the electrical network.
Preparing water
Getting the healing liquid is quite simple. To do this, pour water into a cloth bag. Next, a positive electrode is placed in it. This entire structure is immersed in a jar of water. And here there are also some nuances. The water in the jar should not be filled to the brim. It should be slightly below the top edge of the bag.
The whole process lasts no more than 5-10 minutes. Next, the electrodes are removed from the jar. This must be done very carefully. Otherwise, a mixture of the two resulting fractions will occur. At the end of the process, the water from the cloth bag is poured into a separate bowl.
Assembling a device with a different design
Due to the need for careful handling of the resulting fractions this device is not very convenient. In addition, certain safety precautions must be observed when the live and dead water apparatus is operating.
The instructions for it warn that all manipulations of pouring water and removing the final product must be done without plugging the device into a power outlet.
A device whose design does not include the use of a fabric bag is considered more convenient. In this case, you will need to take two containers. However, banks are not suitable for this. Such containers are distinguished by the absence of a neck and steep, straight edges. The design of the electrodes in such a device remains unchanged. The only difference between such a device is that the anode and cathode must be installed in separate containers. Electrical contact must be ensured between the electrodes. To do this, they are connected with a cotton band wrapped in gauze, which is pre-soaked in water. Such a part will allow ions to move freely. As a result of the operation of the device, both living and dead water will be produced. Moreover, each of them can be seen in a separate container. This allows you to simply disconnect the installation from the network at the end of the work and obtain anolyte and catholyte immediately, and in equal volumes.
In the scheme of this design, as in the previous version, it is advisable to use a light bulb with a power of 15 W. They are usually used in sewing machines and refrigerators. If the electrodes are short-circuited, the light bulb will play the role of a fuse, and if the process does not have any failures, it will act as an indicator. At the beginning of water production, the light from it will be quite bright. Towards the end of the process, the light will begin to dim. The signal about the end of the production of activated water will be its complete shutdown.
Rules for using healing water
The catholyte prepared in the device is an alkaline solution with a bluish tint. It is a clear, soft liquid with an alkaline taste with a pH of 8.5 to 10.5. Catholyte, or living water, is able to retain its healing properties for at least two days. Only in this case it is important that the storage conditions are met. Living water should be kept in a closed container and in a darkened room.
The analyte has a yellowish tint. In addition, the difference between dead water and living water lies in its astringent, sour taste and somewhat acidic aroma. Anolyte retains its properties for half a month. But this only happens when it is stored in a closed container. The acidity of such a liquid is from 2.5 to 3.5 pH.
Activated water should be heated before use. However, some caution must be exercised. Water should be poured into a ceramic or enamel bowl and heated over low heat. Using an electric stove will cause a loss of its beneficial properties. It is strictly forbidden to bring such water to a boil. In this case it also becomes useless.
If both dead and living water are used at the same time, then between their doses you need to take a break of at least one and a half hours. In the case of local application, the pause is much shorter. It is only 10 minutes. This dosing regimen can be explained by the fact that when the analyte and catholyte are mixed, they are neutralized. As a result, the healing liquid simply loses its activity.
