A picket fence is a fairly common type of fencing for summer cottages or private houses. Picket fence gates are quite easy to make and install, and at an affordable price. can serve as a base for climbing plants, which will wrap around it, thereby creating a beautiful living fence. As a rule, the picket fence consists of hewn wooden planks with a width of not more than fifteen centimeters.
An example of a gate for a cottage from metal fence and brick pillars
Fences are interconnected by transverse bars, the thickness and width of which should not exceed ten centimeters. Gates should not only protect your summer cottage, but also decorate it. In order for the gate to simultaneously protect and decorate the site, you need to choose the right material from which they can be made.
Today, more and more people began to install gates and gates made of metal picket fences in summer cottages. Gates made of metal picket fence are so popular because of the full compliance with all the requirements of customers. Absolutely everyone can make a picket fence with their own hands, since this does not require any special skills and abilities. To install a metal picket fence with your own hands, you need to sequentially perform the following stages of work:
Dimensional drawing of a metal picket fence
- Make a drawing;
- Install pickets.
Positive and negative qualities of a metal picket fence
Reliable and attractive fence gate has enough simple design, which means you can do it yourself, without outside help. Naturally, with your own hands you can make traditional gates from wooden picket fence, but today many people prefer a metal picket fence.
Why is it better to make a gate from a metal picket fence?
- Optimal price;
- Small mass;
- Sufficiently long service life;
- No need for ;
- Easy Installation, which you can do with your own hands;
- Simple construction.
A variant of the device of a gate inscribed in a fence made of a metal picket fence
Choosing building materials
Naturally, before you start making a picket fence with your own hands, you need to purchase the necessary Construction Materials, namely:
- support pillars;
- Logs with fasteners;
- Fences;
- self-tapping screws;
- Primer;
- Paint.
As for the material from which the pickets should be made, then this is already at your discretion. Of course, wooden pickets are more natural material, but the main drawback is that they serve no more than ten years. That is why many prefer a metal picket fence, which looks no less attractive and has a fairly long service life.
Sometimes the owners of summer cottages combine wooden and metal fences in one fence, which can last for several decades. But in this case, you need to take into account the fact that the tree has the ability to absorb moisture, which means it will create an additional load on supporting pillars.
Fence gate and gate mounted on brick pillars
IN construction stores usually the length of the lag ranges from two to twelve meters. To reduce the load on the supporting pillars, the distance between them should not exceed four meters.
As a rule, metal pipes are used as support pillars, which are concreted in the ground at a depth of at least a meter.
Also note that above metal pipe there must be a special plug. That is, if you have decided on the material and dimensions of the gate, then it is easy to calculate the number necessary materials. Also during the installation process you will need special mounts for shtaketin. Of course, you can use a welding machine, but this is not always practical, because it can lead to rust.
Scheme and drawing with dimensions of the gate frame
That is why it is best to purchase special fasteners.
To fix the finished metal fence, you will also need galvanized self-tapping screws, which are quite easily screwed in with a screwdriver.
Making a fence from a metal picket fence with your own hands is a simple task. For many years, galvanized fences have been used in urban and suburban areas, where they have established themselves as strong and durable structures. A metal picket fence is a fairly simple structure that you can build yourself at a minimum cost. Money, time and effort. The main thing is to arm yourself with certain knowledge and tools.
Finished fencing option
picket fence
This is the most suitable fence for the house. Fences for giving from a metal picket fence look good.
Its popularity is easy to explain:
- Inexpensive type of fencing, available to any wallet.
- The structure is simple, familiar, concise.
- The metal fence is suitable for urban and household plots.
- Making such an iron fence is easy.
The fence for giving from a metal picket fence should be high enough and strong, and also perform decorative functions. For owners of a residential building, the main thing is protection against penetration and aesthetics. It can be intended for decorative purposes or as a fence for a vacation spot for summer residents.
Yard fencing
Versions
Metal picket fence - a laconic fence without additional decorative elements and design insights.
But the types of metal picket fence and its shape are different:
- Euro picket "Wave". Sections of such a fence are attached so that the top line is first ascending and then descending. This makes for a beautiful fence.
- Euro picket "Gorka" - the top forms an ascending line, which rises smoothly. Considered a classic type of fencing, the design is universal.
- Metal fence "Concave arc" - the upper edge forms a smooth downward line, the width of the gaps is the same. The fence will fit into both urban and suburban landscapes. These fences are universal.
- Metal fence "Herringbone" - the original pattern of the upper edge is suitable for a wooden country house.
Options and forms of a fence made of metal picket fence
In addition to the main types of metal picket fence presented, there are other varieties of it:
- canyon;
- peaks;
- shutters fences.
Ladder - comparatively the new kind, fences of this type have a place in any landscape. Blinds from metal profile is a novelty in the construction industry.
Metal picket fence
Fencing Features
The metal fence is made of a rectangular or semicircular profile. The thickness of the metal is more than 0.5 mm. The spans are covered with a layer of galvanized for anti-corrosion effect.
The photo shows a metal picket fence.
Metal picket fence
The fence is lightweight, the foundation for its installation is not needed. You can build a fence without complicated earthworks and fortifications existing structure unlike a fence from a professional sheet.
For strength, it is necessary to concrete the supporting pillars on which the logs are attached.. Can do more solid construction on piles.
Coated for weather resistance protective materials: polyester, polyester. The coating will give a beautiful glossy finish and resistance to fading. How to paint it correctly, the diagram will show.
The fence has long term operation without additional care.
Strength is comparable to welded structures, and it is not difficult to make an inexpensive fence out of a picket fence.
Read also: At what distance from the fence can you build a garage: SNiP norm and law
The base of the rack fence is made of galvanized steel - a reliable material that will last a long time. Can be inserted into the fences of the gate, if necessary. Gates made of metal picket fence are versatile and durable.
Gate and gate made of metal picket fence
Color options
The fence is painted from a metal picket fence using the method of one-sided and two-sided painting.
The wrong side is covered only with a layer of soil, the front side with paint. This option looks good in summer cottages, it suits lovers of calm tones.
If important bright view fences on each side, choose options with double-sided coating.
The painting of the hedge is carried out with a polymer or powder dye, as for profiled sheet products.
painted fence
With a polymer coating, it is necessary to follow the technology. A fence with such protection can withstand almost any mechanical impact. If there is a scratch, then the metal will not rust, as it has additional protection. Reviews about this method of coloring are the most positive.
Powder coating is no less durable if it is done according to technology, but it costs less. The first layer is protective, applied to the fence for the fence, the second is powder. All layers are baked in special chambers.
Powder coating is often imitated by unscrupulous manufacturers whose products rust at the slightest damage. The polymer coating cannot be made in a handicraft way, so it is of better quality. You need to buy a fence only with a high-quality coating.
finished fence
Types of metal picket fences
Fences of this type differ in the installation method, the size of the spans and the gaps between the structural elements. Their device is not the most complicated.
Fence installation methods
The metal fence is mounted on supports, which we install in the following ways:
- concreting;
- crushed stone;
- driving into the ground;
- combined installation.
Scheme of installation of a fence with brick pillars
Concreting is the most reliable way to install support pillars. It is applied at unsteady soils. The height of the support is not less than 1 m.
The photo shows a fence made of euro picket fence.
Distance between planks
Butting with crushed stone occurs on denser soils, when one driving of pillars will not be enough. You can strengthen the support with brick crumbs.
Driving into the soil is used for heavy soils. The supports are dug into the ground to a depth of 1 m and rammed in the holes made. If the soil is not too dense, then it will be more reliable to concrete the supports. The height of the column is at least 1 m.
Installation of a fence in the soil
Dimensions and distances
There are no standards for gaps for fences. The distance is made for decorative and practical reasons. A large gap between the profile is made in decorative fences. The calculation of the distance between the slats is based on the width of one profile. The smaller the size, the more deaf the fence. However, do not make a fence without gaps.
The size of one span is chosen taking into account the perimeter of the fenced area.
The height is chosen taking into account individual characteristics landscape and preferences of the owner of the house.
Euro picket sections
Infill types
One-sided - the profile is attached only from the front side. The distance between the elements is no more than 5 cm. The picket fence is fastened in a two-sided way with a staggered arrangement of elements.
Read also: Beautiful forged fences and gates with a gate: photos and sketches of options
The location of the picket fence in a checkerboard pattern is popular despite the high consumption of material. The checkerboard fence seems to be solid, it is impossible to see the territory behind the fence.
Double sided fence installation
The combined (double) filling method preserves the view of the surroundings. Part is filled in unilaterally, part is chess. The size of the gaps is taken the same so that the fence looks organic. Bilateral palisade often enclosing summer cottages. You can make a solid similar fence. This type of metal picket fence is shown in the photo below.
Do-it-yourself installation
Do-it-yourself installation features
Consumables:
- supports;
- wooden or iron horizontal logs;
- picket slats;
- screws (metal, wood).
Installation Features
If the installation will be carried out by hand, the wizard may need tools:
- drill driver;
- shovel;
- riveter;
- metal scissors;
- roulette.
A feature of the installation of this design is the absence of a foundation for a fence with a height of less than 1 m. Fences with a height of more than 1 m need a foundation, but less strong than the one on which the corrugated fence is installed.
Next, you need to calculate consumables. Then do the marking of the site. To do this, they clear the soil from branches and leaves, install the supports of a metal fence for the fence. Logs are stuffed on the supporting pillars, galvanized strips are attached to them. All installation work carried out with the help building level to prevent distortion of the structure. How to calculate the quantity consumable, look at the video.
Do-it-yourself installation: step by step instructions
The installation of a fence from a pile palisade begins with the installation of supports and stuffing the frame. It is quite easy for a novice master to work on such a design; he will not be puzzled by the question of how to make a fence from a metal picket fence on his own.
The video shows how to install fence posts.
You can read about how to make a fence from a euro picket fence at the link.
Installation of supports
First, markup is made for mounting the support. Dig holes required depth and width in accordance with the dimensions of the column. Strengthen with columns, as much as the design requires.
Drawing for the installation of the fence
Two profiles twisted together are used as a support. You can make a fence from a metal picket fence on screw piles. Instead of profiles take profile pipe. If desired, masonry is made of brick pillars for a metal picket fence.
Then the foundation supports are set according to the level. Fill the prepared recesses in the soil with a solution of cement, fix the supports. Installation is continued after the solution has completely dried, which is about two days. You can substitute brick supports for fixing.
Scheme for installing a fence
As soon as the supports are concreted, the transverse logs are fixed. A quarter of a meter recede from the extreme upper point of support and make a mark. Carry out similar markings on other pillars using a level.
The fastening fixes the upper crossbar to the base. Similarly, the lower strips are mounted to the metal, the size of the indent from the ground must be at least half a meter. The gate is sheathed separately. You can attach a metal fence.
Eurostudent fence is an inexpensive, practical and aesthetically attractive option for fencing a summer house and a courtyard of a private house. A fence and a gate made of a metal picket fence are easy to assemble with your own hands - the planks are screwed to the logs with screws at a certain distance from each other. The design can be with or without a frame. Pillars for this design can be made of any material.
If you arrange the pickets in one row, then the territory will be clearly visible from the street, as well as let in light, Sun rays, air, which is important for the growth and development of plants. To close the view of the yard, the boards “fill” the log on both sides in a checkerboard pattern.
Advantages
- Diversity colors, width (70 - 128 mm) and length (50 - 300 mm) slats allows you to create interesting design suitable for the exterior. Metal thickness is standard - 0.4 - 0.5 mm.
- The boards are made of galvanized steel coated with a polymer composition on one or both sides - the coatings protect the metal from moisture and prevent the development of corrosion and fading.
- The long period of use - from 30 years and more.
- The strength of the metal, the level of which depends on the type of profile - products are produced with a U-, M- and C-shaped profile, the latter is considered the most reliable - anti-vandal.
- Easy care - the fence with a metal picket fence does not need to be painted, it can be washed with plain water from a hose.
Even on good fence the gate and the gate should stand out - to meet guests with their friendly appearance. And how to do it yourself?
Gate of eurostudent with brick pillars
The simplest option - to highlight with color - does not always “work”. It is best to use another material for this. Then it will be possible to experiment with color, and with the form, and with the design.
The choice of material for the gate
We will not look for options for expensive wrought iron fences and brick walls: whoever has the opportunity to build such a fence will find money for a designer.
For fences made of other materials, a gate and a wicket made of euro picket fence are a good choice. Since its appearance on the market, it has been in constant demand, because it has many advantages over both wood and profiled sheets:
- Unlike wood, the European fence does not rot, because it is made of galvanized steel and covered with two layers. polymer paint. Service life - up to 50 years.
- A variety of colors and textures, combined with different profiles and sizes, allows the use of a metal fence in various fences and structures: from flower beds and front gardens to the manufacture of gates, gates, and even as a fence on the site. The width of the bar is from 70 to 128 and the length is from 0.5 to 3 - this is enough to "enclose" whatever your heart desires.
- Transportation even with your own hands is not difficult: picket fence packs do not take up much space.
- You can make a gate, a gate and a fence made of a euro picket fence with your own hands. You can align light planks along the cord and attach them with self-tapping screws alone.
- The best part is that the design of the fence and the gate from the euro picket fence can be anything. Choose profile, color, plank shape. You change the height and width of the “fence”, mount it with a different gap, in one or two rows. Can you imagine how many options for decorating the entrance to the site?
Fence design options - And all this beauty does not require maintenance and regular staining. In case of damage, it is enough to replace a couple of strips.
Some production features
Features lie in the processing method.
The galvanized and painted metal strip is passed through rollers that gradually form a profile, then cut into a predetermined size. Such processing does not deform the metal coating.
There is another production - "garage". Sometimes the strips are cut from the finished profiled sheet, in another case, the profile is bent with a home-made stamp-press, breaking the polymer coating. To ennoble the incised edges, they are bent by 180 °, the paint in this case may peel off altogether.
Therefore, when buying a European fence, you need to pay attention to the quality of workmanship. Do not buy from dubious manufacturers.
How to make a gate from a metal fence
Now that the agony of choosing the material and design of the wicket and gate is over, you can begin to translate ideas into practice.
The first step is to prepare the tool and materials:
- Roulette, screwdriver, grinder, almost everyone now has a level.
- To install the pillars, you will need a drill, sand, crushed stone, cement.
- Without welding machine it is impossible to mount the frame of the gate and the gate. It’s good if you are a welder and you can make a gate yourself, otherwise you will have to look for a master.
- Self-tapping screws in the color of a metal fence, primer, paint, circles for grinders are consumables.
We note right away that the gate posts and gates must stand firmly: they are not connected into a single “chain” like fence posts. That is why when they lay strip foundation for a fence with brick posts, the foundation is not interrupted under the entrance to the site. If the strip foundation is not required, then the "input" pillars are installed especially carefully.
- Regardless of the soil, we drill a well deeper than the freezing level.
- At the bottom we pour a layer of sand and ram.
- Ready for the poles. For them, we use a pipe Ø100 mm or a profile pipe 80 by 80 with a wall thickness of at least 2-3 mm. We take the length with a small margin. At the bottom of the pipes, we weld 2 transverse struts, they will not allow the soil to squeeze the pillars out of the ground. After that, the columns are primed and painted.
- We install the poles in the wells, align with the cord and level.
- We fill it with concrete a quarter of the height, check the correct installation. It is not necessary to fill the pit with concrete completely: this increases the surface of adhesion of concrete to the ground and the pushing force increases.
- After a day or two, when the concrete sets, we fill the hole to the top with a mixture of sand and gravel. We ram in layers.
Do-it-yourself poles stand firmly and are not subject to extrusion. Around the metal base, you can lay out a brick column, make a formwork and pour a column of cobblestones, assemble a fake column from plastic blocks.
Having installed the pillars, we measure the distance between them and make frames for the gate and gate. If you do not have a welding machine, and you do not have the opportunity to make them yourself, contact your friends, neighbors - now many have welding at home. Frames must necessarily have braces-reinforcements, especially gate leaves.
After all welding work gate frames and wickets are cleaned and primed. After drying, paint in two layers.
It is not difficult to mount the eurostudent with your own hands, which we will do now. For this:
- First, mark the position of the slats so that the gaps between them are the same. We take into account that during installation, the gaps will be closed with second-row slats. So you can adjust the "transparency" of the gate.
- We stretch the cord at the desired height and begin to mount the picket fence. Have you already stocked self-tapping screws to match the color of the gate?
- It will not be difficult to install the gate: it's just two more gates, but larger in size.
When making a gate from a European fence, do not take the time to try on, mark, install according to the level of each plank, do not save on installing poles. The entrance to the site is its face and it should be beautifully decorated.
To ensure the finished look of the house or cottage, a variety of turnkey fences are erected. The fence is primarily intended to describe the outer border of the territory. And it has practical significance, for example, it serves as protection against the penetration of unwanted guests, provides peace. And when choosing installation methods, the turnkey fence is considered the most profitable, its price includes all the hassle associated with the installation of the finished structure.
What can be turnkey fences and their features
Today, the buyer has a huge selection of fencing, which differs in appearance, pricing policy. The company that offers its assistance at the moment when you decide to buy a turnkey fence in Moscow provides different options:
- fences to order from a welded mesh with a polymer coating;
- metal fence;
- denser fence - blinds made from a metal profile;
- gabion structures (they are a metal mesh that is filled with material, in this case stones);
- construction of temporary fences.
The rating of popular fences is headed by metal fences. Their main advantages are durability, endurance to various damages. This is exactly the option when you can spend money once on the installation and purchase of the fence itself and not deal with this issue for 20 years.
When choosing a fence, and installing it on your site, you should pay attention to nearby objects. It is worth ordering a high and deaf fence if it is installed near roads or directly opposite the facade. But if there is household plot neighbors, then you should think about choosing another fence so that it does not obscure or interfere with plant growth. Also, a significant role is played by the correspondence of the style of the fence with the main view of the house.
Who to entrust the manufacture of a turnkey fence
You can entrust this task only to a proven large company. And we offer to order fences inexpensively without loss of quality.
Professional staff will help you choose suitable option taking into account the wishes of the client and the peculiarities of the area. Because the fence is not only the right to feel protected, confident, but also an opportunity to show your wealth. Ordering a turnkey fence from us is simple and profitable, since our company works directly with material manufacturers, and the manufacture of structures is carried out on modern equipment.
