Today, the construction of fences faces serious requirements related not only to strength, stability and reliability, but also to the aesthetics of the fence. The fence should not only be durable, but also attractive and fit perfectly into the design of the site.
Option for a fence made of corrugated board. For the construction of such a fence, both galvanized corrugated sheeting and polymer-coated sheeting can be used.
Which one for the fence and what characteristics should you pay attention to? Special attention? Our experts will give recommendations about corrugated sheeting and the rules for its installation.
In addition to the high cost of such a fence and the problems with its installation (you can’t do without construction skills), the construction of brick, wood or concrete fence It will take a lot of time, and some stages involve “wet” work - mixing the solution in large quantities.
Not only are they installed much faster, but their construction does not require special knowledge or expensive equipment. The cost of a profiled sheet will also surprise many - square meter corrugated sheeting costs only from one hundred seventy to two hundred eighty rubles, which is incomparable with the price of the same brick, good tree or concrete solution.
Corrugated sheeting options
First, it’s worth defining what corrugated sheeting is and why it is so popular as a building material. These are large sheets of varying thickness, obtained from bent iron in a cold way, that is, without heating on special machines.
Such sheets have special stiffening ribs on the surface, which are obtained by rolling on machines. The shape and height of such waves can be different, it depends on the type of corrugated sheeting and its purpose.
On both sides the corrugated sheet may have different protective covering: polymer, plastisol or galvanized.
Let's take a closer look at each of the options.
- Galvanized sheets have a thin layer of hot zinc applied at a thickness of twenty-five to thirty micrometers. This type is usually used for canopies, structures simple fencing, floors in outbuildings. The cost of this material is usually thirty to forty percent lower than with a paint layer, but this does not in any way affect its quality and strength. For fences, they usually prefer to take corrugated sheets that have a galvanized coating with inside, and on the outside there is a polymer layer.
- Corrugated sheeting with a polymer coating is a profiled sheet, on the surface of which a special layer of a mixture of plastic and various synthetic resins is applied. A polymer coating is applied to the galvanized surface, creating not only a decorative layer, but also excellent protection of the material from various damages. Special ingredients are added to the paint to give the color richness and brightness. The polymer layer does not fade in the sun, and there is no need to update it over time. It is from this type of corrugated sheet that it is best to make fences in combination with such building materials, like brick, natural stone. The cost of a polymer-coated product is higher than that of a regular galvanized product, but the excellent appearance and aesthetics are worth it.
- Corrugated sheeting with a plastisol layer is a sheet that is covered with a fairly thick layer of plastisol, which is resistant to a wide variety of mechanical damage and unfavorable operating conditions. The cost of this material is slightly higher than others.
Advantages of products made from corrugated sheets
So why is corrugated sheeting better than other building materials? This is due to the numerous advantages of the material, among which the following should be highlighted:
- Fast and easy installation. For all fencing work land plot It may take only one to three days. The installation itself includes only such steps as marking the line of the future fence, installation support pillars, fastening cross beams, fastening corrugated sheets.
- Can be used together with other building materials (brick, concrete, wood, natural stone) - the fence will be more attractive and original. Thus, it can be supplied in full accordance with overall design plot and style of the house.
- You can build a fence of almost any height from corrugated sheets, since the maximum sheet length is up to twelve meters. The fence itself can be installed up to five to eight meters high, while its cost will be much lower than a similar one made from another material, and the quality and strength are much higher.
- When constructing a fence from corrugated sheets, there is no need to build a preliminary complex circuit. The fence consists only of support posts, crossbars and corrugated sheets. When working, you just need to follow the recommendations that are accessible even to beginners.
- Excellent sound insulation properties. A profiled sheet can muffle up to seventy percent of the noise coming from the street.
- Wide range of colors. You can choose any color that will not fade over time and will perfectly match the design of your home.
- High performance characteristics of the material. There is no need to tint it, repair defects, and cleaning generally comes down to hosing it with ordinary water.
Marking of corrugated sheets
When choosing corrugated sheets for fences, you should pay attention to the marking of the material, which indicates what type of corrugated sheet it is, what the wave height is, the width in millimeters, and the thickness of the steel sheet.
Today we offer profiled sheets of the following variations:
- N – load-bearing corrugated sheet, which is used for roofs and ceilings;
- WITH - wall material, which can be used as a material for constructing fences and walls of outbuildings.
- NS – universal profiled sheet. It can be used for any type of work, including installing fences.
After letter designation followed by numbers indicating the height of the profile wave, then the sheet width and steel thickness. The profiled sheet must be selected taking into account these parameters.
How to choose a profiled sheet for a future fence?
To install fences, it is recommended to purchase a type C profiled sheet. The height of its corrugation should be up to twenty-one millimeters, the thickness of the corrugated sheet itself should be from seven tenths of a millimeter (preferably even more, since the strength of the future fence and its resistance to wind and other loads depend on this) . No need to save money here!
So which corrugated sheet should you choose for the fence? Here are some tips to help you choose the right type of material:
- First of all, we check the thickness and quality of the metal, while taking into account that the thickness on the marking is indicated without taking into account the polymer layer. It is best for this value to be from seven tenths of a millimeter, but for low fences you can also take material whose thickness will be about half a millimeter.
- Correctly determine the type of corrugated sheet. Many people think that it is better to take the H profile, which is thicker, but this is not so. The loads on the fence are not so great, and purchasing such material will be a simple waste of money.
- The edges of the corrugated sheet should not have burrs or irregularities, and there should be no dents or other defects on the surface. All sheets in a batch must be identical: the same thickness and color.
A fence made of corrugated sheets is the most common type of fencing not only for private, but also industrial, as well as construction sites. Such a fence can be either temporary or permanent. But depending on the location of application of the fence made of corrugated sheets and the duration of operation, it is necessary to carefully approach the choice of the thickness of the corrugated sheet itself. We'll tell you what thickness of corrugated board to choose for the fence.
The thinner the profiled sheet, the less warranty it has, all other things being equal (amount of zinc, material and coating thickness). It is clear that you want to make a fence for yourself once every 20-30 years. Therefore, the thicker the profiled sheet, the longer it will last, and the cheaper it will be to maintain the fence.
On the other hand, you will initially have to spend more money on installing a fence made of thick corrugated sheet metal. What if there is no such money? From the point of view of the durability of the fence, you need to look for a compromise between the thickness of the sheet and its coating. 275 grams of zinc, high-quality coating with a maximum warranty period, for example, Quarzit provides a warranty of 30-35 years. This means that when correct installation For 30 years you can be sure that nothing will happen to the fence. But there is important nuance- price. The price of corrugated sheeting with such a coating is about 550-570 rubles per square meter of corrugated board with a thickness of 0.5 mm. Not everyone is willing to pay this price. But, once you decide, you will receive a high-quality fence made of corrugated sheets and a 30-year guarantee. 
Corrugated sheets are available in different thicknesses. The minimum sheet thickness found is 0.28 mm, the maximum is 0.8 mm. Somewhere in the middle is optimal thickness for fencing.
- Corrugated sheeting 0.35 mm thick, application: temporary fencing of construction sites, fences of areas protected from the wind. The most rare case.
- Corrugated sheeting thickness 0.4 - 0.45 mm, application: fencing private areas and industrial facilities, surrounded by other buildings or trees, in lowlands. The most common corrugated sheet.
- Corrugated sheeting with a thickness of 0.5 mm, application: fencing private areas and industrial facilities without protection from the wind, in areas with strong winds, on hills.
It is impossible to consider the thickness of corrugated sheets not in conjunction with the type of sheet. The higher the profile, the smaller the thickness can be selected. For example, the wind resistance of a C8 sheet with a thickness of 0.5 mm and a C21 sheet with a thickness of 0.4 - 0.45 mm will be approximately equal. On the other hand, sheet C8 has a larger usable area. And from an aesthetic point of view it looks more attractive. 
In addition, the choice of thickness is influenced by the number of attachment points: the more fence crossbars there are, the more wind-resistant the corrugated sheet will be. Most companies offer installation on two joists. If profiled sheet C8 with a thickness of 0.4 mm is used with a fence height of 2 meters, it is better to install 3 crossbars.
As standard version(for most cases):
- C8 sheet 0.5 mm thick on two joists with a fence height of up to two meters;
- sheet C21 0.45 mm thick on two joists with a fence height of up to two meters.
And do not forget that not only the profile and thickness of the sheet are important, but also the coating, so carefully ensure that the zinc content is at least 180 g / sq. m. m and preferably double-sided coating (primer + color).
When choosing a material for building a fence, the question always arises: which one? existing options better. Profiled sheets are different a successful combination price-quality, therefore very popular. To determine the most suitable option for certain operating conditions, you should study the types of corrugated sheets, the parameters of each design, which determines the cost of the products.
Marking
In the production of profiled sheets, cold-rolled and hot-rolled steel is used. Their service life is ensured by an anti-corrosion coating, which is performed by galvanizing.
Product marking
If a shade is needed, paint is used. There are also materials with heterogeneous coatings. They come in a wide range of colors. Another feature of corrugated sheeting is a corrugated or profiled surface. These stiffening ribs determine the high strength characteristics of the fence.
Based on differences in the configuration of the surface of the material, the following types of professional products are distinguished:
- Load-bearing corrugated sheeting (marked H) - used in the construction of roofs and floors.
- Wall option (C) – designed for walls, partitions, fences of objects for any purpose.
- Universal corrugated sheeting (NS) - can be used both to cover a building and as a fence.
All of these types of material are characterized by different parameters (sheet thickness, profile height, product width) to ensure a sufficient level of structural rigidity, be it a fence or a roof. That is why, if the question of which type of corrugated sheet is better is being decided, it is not recommended to use load-bearing material for fencing. Likewise, the wall option is not suitable for the roof.
The sheet designation encodes its main parameters. For example, product C21-0.45-750-11000. The letter allows you to determine the type of material. The first number is the profile height. The second number is the thickness of the profiled sheet. Next, the width of the product (useful) is encrypted. And the last number is the height of the sheet. All values are indicated in millimeters.
Price-quality ratio
If a material for a fence is selected, it is necessary to determine which option from the existing range of corrugated sheets is better and is the most acceptable in terms of price and characteristics.
Product types
Often, cheap fence components do not last long. But it is not always advisable to purchase expensive material.
For example, characteristics such as tightness and strength are important for a roof. The last parameter determines the thickness of the sheet. Such requirements are imposed taking into account significant loads on the floor, in particular due to snow in winter.
For the fence, the average option according to the characteristics is quite sufficient: C8, C10, C18, C20, C21. The rigidity of profiles with a height of 8-21 mm will provide required level structural strength. The thickness of the corrugated sheet should be in the range of 0.5-0.7 mm. Material with similar characteristics is in the middle price category, but is quite reliable.
The stronger the wind load in the area where you plan to install the fence, the stronger the corrugated sheeting should be, which means that in such conditions it is better to install fences with a significant profile wave height. C8 grade sheets should be avoided.
Choice by wear resistance and service life
Galvanization lasts a short period of time (10-15 years). Material coated with a compound of aluminum, zinc and silicon will last a little longer.
If we consider everything existing species profiled sheet: with galvanized and polymer coating (unilateral and double-sided application), then the first option is the least resistant to external factors, since if the anti-corrosion layer is damaged, the material begins to rust. Accordingly, its service life is significantly reduced.
Polymer coatings are used in different types:
- polyester (polyester dyeing);
- “pural” (polyurethane-polyamide paint);
- PVDF (polyvinyl difluoride acrylic material);
- plastisol (a combination of polyvinyl chloride and plasticizers).
The last option mentioned is the most popular due to excellent properties. This coating provides more long term fence service than polyester dyeing. The thickness of the plastisol layer reaches 200 microns. For comparison, galvanization is covered with a layer of anti-corrosion material of no more than 30 microns.
Evaluation by external characteristics
In this case, you need to proceed from the object for which the profiled material is selected. Outbuildings, parking lots, and warehouses are fenced with a standard zinc-coated sheet, as it is not attractive. But also to appearance objects for this purpose are not subject to high requirements.
If the question of which corrugated sheeting would be best to use, for example, for fencing private housing, is being decided, it is recommended to choose a design with a double-sided polymer coating.
This leaf is characterized by excellent external characteristics not only from the outside, but also from the inside. Another option - with photo printing to match the structure natural materials: wood, stone.
Manufacturer selection
There are quite a few companies involved in the production of profiled sheets. There may be several of them in each city. Many manufacturers operate in different cities, for example, SPK-PROFILE, Rosmetall. When deciding which profiled sheet is best to buy, you need to study the market in your region and compare prices. You can use the recommendations of friends who have already collaborated with one of the companies in question.
You should not purchase products at minimum prices, since in such cases it may turn out that the sheet is of low quality or does not meet the stated characteristics of rigidity and durability.
Thus, corrugated sheeting is very popular today. In addition to existing designs, new types of sheets are appearing, in particular, for picket fences with pointed protrusions along the upper edge. In terms of price, profiled material is inferior natural stone, however, has a fairly high degree of reliability.
The main thing is to choose the right corrugated sheet according to its characteristics, taking into account the thickness of the sheet, the width and height of the product, as well as the height of the profile wave. The more durable and durable the material, the more expensive it will cost. When choosing, you also need to take into account the operating conditions, which will allow you to select sheets with suitable parameters.
Before you decide what corrugated sheeting is needed for the fence, the following factors should be taken into account:
- site location;
- tasks assigned to the fence.
When the question of what corrugated sheet use for the fence, size (namely the length of the sheet) matters.
Fence made of corrugated sheets with stone pillars
If the garden territory is internal, i.e., surrounded by other plots of a garden partnership or cottage community, its fencing experiences less wind loads.
A low fence will allow you to demonstrate to others the latest achievements in the field Agriculture And landscape design. But at the same time, the neighbors will be able to see fashion shows in swimsuits on a hot summer day.
Extreme, isolated areas or areas bordering highways require increased protection from wind, sand, and debris. A high fence is more suitable for those who live by the principle “my home is my castle.” In addition, it is a good soundproofing barrier.
When using excessively thick metal, corrugated sheet metal for a fence will require unreasonably high financial costs: both for the sheets themselves and for reinforced load-bearing structures.
Taking measurements
Optimal for arranging fencing is wall corrugated sheeting with a corrugation height of 8 to 20 mm. The metal thickness in such products starts at 0.4 mm.
The specimens available on the market with a thickness of 0.35 mm or less are not able to withstand severe wind loads and are often made from low-quality raw materials. Practice shows: use corrugated sheet similar quality for the fence- means just throwing money away.
Solid fence made of corrugated sheets“Metal thickness” and “corrugation height” are parameters using which we select a material with the required characteristics: strength, weight, cost.
There are also indirect signs, which without measuring instruments make it possible to understand what kind of corrugated sheet is needed to you for the fence dreams, and which one is better to bypass:
- smooth surface without dents;
- stability overall dimensions sheets;
- uniform shade of the front covering and the absence of any damage (scratches, chips, abrasions);
- neat cuts without nicks or burrs.
It is quite problematic to fully verify the decent quality of the profiled sheet on your own. To do this, you need to equip yourself with special instruments that allow you to evaluate the thickness of the metal and paint coating (micrometer, thickness gauge), and measure the parameters of sheets randomly taken from several packages over their entire area. But even this will not allow us to establish the true quality of the metal hidden under the finishing layer of polymer.
When solving the problem of which corrugated sheet to choose for a fence, you must definitely remember about the aesthetic component. After all, a modern fence is not only a fence, but also a decoration of the site.
A little about the finishing coat
If the protective properties of the fence primarily depend on the metal used (its quality, thickness, shape), then the protection of the thin-sheet steel itself from corrosion processes is assigned to the polymer coating.
Which corrugated sheet is better use for the fence depending on the type of polymer coating? Here you can follow several recommendations.
- Polyester like finishing coat suitable for fences that do not experience serious mechanical loads and are located in areas with low corrosive aggressiveness of the environment.
- It is better to give preference to coatings with increased resistance to mechanical loads when choosing corrugated sheeting for a fence exposed to stones and sand flying out from under the wheels of a car, tree branches and shrubs.
- Enhanced corrosion protection will not interfere with any metal, but is vital for fences used in regions with high annual amount precipitation located close to the sea or characterized by high concentrations industrial enterprises.
Fortunately, modern coatings combine a whole range of different working properties. In addition to the above, the most relevant are color resistance to ultraviolet radiation and decorative characteristics such as shades, patterns, textures.
Deciding which corrugated sheeting to use for a fence can turn into a whole epic of studying the types of material, its characteristics, and samples available on the market. But there is a much simpler way that allows you to make the choice as accurate as possible and the purchase budget to be minimal: Metal Profile Company specialists will help you choose inexpensive material from the manufacturer. And it will always be material of guaranteed high quality, regardless of the price category.
