In this article you will see pictures and drawings of a karambit knife, and also learn about the process of making a model from scrap materials.
The knife is a curved blade with sharpening on the inside and a handle with a ring under forefinger.
A reverse grip is predominantly used, intended for ripping movements. Thanks to its unusual shape, karambit attracts the attention of ordinary people and bladed weapon lovers, and avid gamers will immediately recognize this remarkable knife. You can make it yourself, according to drawings, at home.
Origin
Karambit comes from Sumatra, one of the Asian islands, where it was compared to a tiger's claw.
Indeed, the external resemblance of the blade is easily traced, and the blows inflicted by the weapon resemble the swings of the paw of an angry animal.
Its historical origin is still unclear. There are two main options. The first is that it was used in cockfights, tied as spurs so that the rooster would injure its opponent.
The second was a formidable hunting and combat knife of warriors from Malaysia. None of the options have been proven. The photo below shows what the prototype of a modern karambit looks like.
In video games
In general society, this knife gained popularity due to the Valve game called Counter Strike: Global Offensive. There, karambit is presented as a popular skin for a standard knife, it changes it appearance and animation.
The community immediately liked the skin, but most users did not have enough money for an in-game purchase. Because of this, most of the drawings are made specifically for karambit from cs go.
Here is a screenshot from computer game CS:GO, which shows what karambit looks like:
How to do
You can create a knife from various materials: from plywood of various millimeters, from suitable tree, made of thick cardboard. Even thick paper can be used. The method, however, is the same:
A lot of interesting colorings for karambit can be found in the list of skins for CS:GO.
The most popular and beautiful following color options are presented in the image below, listed in clockwise order, starting with the knife with the white ring:
- Autotronics.
- Murder.
- Hand painted.
- Surface hardening.
- Gradient.
- Bloody web.
- Legends.
- Gamma waves.
- Tiger tooth.
- Marble gradient.
Please note that the knives in the photo are made of wood, and therefore, with proper practice, you will get the same quality work.
So, we looked at the drawings and techniques for producing karambit-type knives from various materials: wood, plywood, cardboard and even paper.
You also learned about the origin of this bladed weapon, the reasons for its popularity and the most interesting colorings, which in some way are whole works of art. A little perseverance and practice, and you will succeed.
The curved blade with a wide sharpening on the inside, which has an unusual handle with a large hole for the index finger, is very practical to use. Thanks to the ring, the karambit is easy to take out of your pocket and is comfortable to hold in your hand with the blade down. It is not surprising that today many are trying to copy the shape of a knife in order to make their own “sample” at home.
For making homemade pocket knife You will need a piece of rectangular plate (it is advisable to use a blank made of carbon tool steel) approximately 3-5 mm thick. The size of the karambit can be any - at your discretion. The main power tools you will need are an angle grinder, a drill and a belt sander.
Making a karambit knife: work process
We transfer the knife template (or draw the contours by hand) onto the steel plate. Then, using an angle grinder, we cut out the workpiece. You should try to “shred” the metal as close as possible to the outer contour lines of the karambit knife - then you will have to bother less with a file. At the next stage, we process the workpiece on a belt sanding machine.
It is most convenient to process the internal curves of a karambit knife with a grinding attachment for a corded drill or a drill. It should be noted that power tools make metal processing much easier. Then we drill a hole in the handle. Internal sides process the rings with a round file and sandpaper.
The knife is one of the most valuable items in CS GO. Its value lies in the fact that it very rarely falls out of weapon chests. You can open a hundred cases and still not get it. In this article we will learn how to draw a karambit.
It has a very unusual twisted shape with a ring, and if you press the F+R buttons, it will twist on your finger through this ring. Well, let's not waste time and quickly start drawing.
First example
The first drawing method, which will show us how to draw a karambit knife, will be more realistic. The next example will get more artistic. To draw, we will need a pencil, felt-tip pen or pen, this is not so important, because you can draw it with anything.
Let's start with the blade, it should look like a claw. Also, it should not be too long, since most of the length of this knife is occupied by the handle.
We depict the handle, we already said earlier, since the karambit has an unusual shape, the handle should be longer than the blade. At its end, do not forget to depict round hole.
All the difficult stages are behind us and now the most enjoyable part remains - we detail our drawing. Let's draw a couple of lines on the blade.
Now let's draw the handle.
CS GO has a very limited selection of skins, but the artistic world is limitless. Therefore, you can choose absolutely any colors and patterns and paint the resulting picture.
Second drawing method
Let's look at a more artistic drawing that will show us how to draw a karambit step by step in just three steps. It is almost the same as the previous one, but the style itself is slightly different.
So, we depict a blade that looks like a dinosaur claw or a bird’s beak; everyone sees something different in it.
We draw a handle and separate its tip for the future ring. If you look at the picture below, you will see that the karambit has a very unusual shape and looks a bit like a boomerang.
The final step will be detailing our bladed weapons. We make the ring voluminous, and shade the rubber inserts with diagonal lines.
The drawing is ready! All you have to do is choose your favorite colors and paint it.
In this video tutorial, together with the TOKARKA channel, we will show you how to make a karambit knife from the CS GO game at home. No special factory equipment or expensive, rare materials are used here. The technology is simple and understandable. The basis of the product is a circular saw.
If you wish, you can buy a ready-made karambit knife in this Chinese store.
Disk from circular saw remove dirt and rust with sandpaper. Next, we carry out degreasing with gasoline or any other solvent. Degreasing is necessary so that the protective layer of varnish holds firmly and does not fall off during electrocorrosion. Nitrocellulose varnish is ideal for our purpose. It adheres very well to the surface and dries quickly. Apply three layers on each side.
The teeth were also completely varnished. It is advisable to take a brush, but you can, as in the video, use a cotton wool on a stick.
An image of a karambit knife was found on the Internet. Now you need to print it on thick cardboard using a printer. There's no way to do it without it. You need to attach the cardboard to the screen and redraw it with a gel pen. Accuracy down to tenths of a millimeter is not needed here.
Use a marker to increase the outline by a couple of millimeters. This is necessary so that after burning the product turns out to be as close as possible to the original. Not only scissors will do, but also a breadboard knife or scalpel. Holes can be made using a punch or drill.
Impregnation of cardboard will be done using nitro varnish, diluted 50 times with solvent, so that it becomes waterproof. The pattern is slightly glued to the cardboard and now it is convenient to cut out the other half with a stationery knife. After cutting, glue both halves together with undiluted nitro varnish. And now we’ll use it to glue it to the steel disk.
The tin wire will be connected to the negative terminal from the power supply. The plus will be connected to the disk itself. Superglue will hold it in place perfectly.
Using a scalpel and then a file, scratch the protective layer of varnish. It is in these places that the metal will burn out during the electrochemical reaction.
The most powerful power supply that we could find was from a computer at 230 watts. There is a 12 volt output. We will use it. Closure. It has short circuit protection. We will install a toggle switch and an LED to make it convenient to work, as well as rubber feet.
During the reaction, chlorine is released. To avoid poisoning, you need to open the window wide and turn on the fan. It is important that chlorine vapors fly away from the master. Such actions cannot be performed in enclosed spaces where there is no ventilation.
Homemade karambit knife
Salt water flows through the tube from the dropper. With its help we will wash off the resulting rust. Electrocorrosive burning is good because it does not form large quantity dust, dirt, noise that may interfere. But he is very slow.
The speed of the reaction depends on many factors. It is clearly visible that the depth of the burnt part is about 1 millimeter. Apply a fresh layer of nitro varnish into the formed recess. To create a new protective mask. When it dries, we will make scratches again so that the burning does not go in all directions, but only in depth.
It is convenient to carry out this reaction in a plastic bucket with salt water. The plus is connected to the disk and the negative wire with a metal plate is immersed. It is better to place the bucket outside so as not to poison people and animals. There is no need to remove rust. It will fall off on its own and settle at the bottom.
Next, watch the video from 6 minutes. About another knife in another one.
Many boys, although there are probably also grown men, fans of the computer game Counter-Strike: Global Offensive think about how to make karambit from wood? It turns out that everything is not as difficult as it might seem initially.
Tiger Claw
"CS:GO" is a popular computer toy for boys of all ages, over 13-14 years old. Its plot is primitive, but the arsenal used by the heroes amazes the imagination with its vastness. From bladed weapons to firearms, everything is used to complete a rather controversial mission. Among the knives included in the KS-ki collection, as gamers briefly call the toy, the most notable knife is the karambit. It is shaped like a tiger's claw - just as curved and causing the same lacerations. On the handle of the knife there is a round hole for a finger - for a better grip, and also to show off such a weapon, turning it with all sorts of somersaults. You can buy almost real karambit by ordering it in one of the online stores. And one might wonder abouthow to make karambit from wood with your own hands, and find a solution.
Base - thin plywood
It is enough to simply cut karambit from several pieces of plywood, then glue them together, sand and paint. This kind of work reminds - the middle of the knife is the most most of, then parts are placed evenly on both sides, decreasing in scale. Such a toy will be quite safe, but quite realistic. The graphic layout of the karambit is shown in the figure.
And here are the individual parts indicating the thickness of the material used and the number of pieces.
Model assembly
Having cut out all the necessary parts from plywood using a jigsaw, they must be cleaned of dust and degreased. Synthetic glue is suitable for gluing parts. wooden surfaces or casein. It is necessary to use glue strictly according to the instructions so that the model does not fall apart over time. When the karambit is thoroughly dry, a hole is drilled or sawed out on the handle for thumb. This stage of work should be as careful as possible so that the layout does not break. When everything is ready, the karambit must be sanded with sandpaper and again cleaned of sawdust dust. As we see, the question is How to make a karambit knife from wood has a not too complicated answer.
Solid wood
There is another optionhow to make karambit from wood. But it is available only to those who confidently work with wood, feel the wood, know the techniques and principles of working with tools for such creativity. The most suitable wood for handcrafts is linden. The block must be well dried, without cracks. The dimensions of the workpiece are taken slightly larger than the desired dimensions of the karambit. In order to solve the problem correctly -how to make karambit from wood, you need the following tools for handicrafts:
- fixed blade knives made of carbon steel with a hardness of 55-60 RC (blades must be different in size and configuration);
- chisels of different cutting edge shapes;
- vice;
- drills of different diameters.
For such work, you need not only a drawing diagram of a karambit, but spatial imagination, which helps in the correct construction of the stages of work.
Below is a photo of what a solid wood karambit will look like.
Artistic creativity
It's not enough to knowhow to make karambit from wood, you also need to paint it so that it looks like the real thing. There are several options for coloring (skins) of a knife in the game Counter-Strike: Global Offensive: from " Pure water" to "Murder". There are professional artists who, for a fee, manually paint models of karambits to look like real ones.
But you can try to paint your own karambit yourself. Best to use acrylic paints- they mix well, are harmless, dry quickly and do not get dirty. The skin can be viewed on the CS:GO website, or you can come up with it yourself. The main thing is to turn on your imagination and desire to do beautiful thing, similar to the real Tiger Claw knife. Good luck!
