Barbie is the most famous doll in the world. For her, they produce clothes, shoes, dishes, accessories, cars, as well as houses, which are sold both separately and together with furniture. Such a pleasure is not cheap, but meanwhile you can easily make a house for barbie with your own hands. This will take a little time and will bring a lot of pleasure, both to parents and to the little mistress of the doll, who will take an active part in arranging a new home for her pet.
The fantasy of the masters has no limits, so they offer to make a house for a Barbie doll from plywood, wood, cardboard boxes, old cabinets and shelves, sheet cardboard, fabric. Each option has its own advantages, and the result depends on the level of skill and effort. It can be either a simple and comfortable one-story house or a multi-storey castle with arches, balconies, stairs and even an elevator.
Installation of the structure consists of the following steps:
- We draw drawings;
- We make templates;
- Cut out the details;
- We connect the details;
- We are refinishing the house inside and out.
This installation procedure is typical for the manufacture of a house made of plywood, wood or cardboard.
At the finishing stage, you can connect the child to the work so that he himself chooses the desired decor option. Pink is considered the traditional color of Barbie, so it can be taken as the main tone.
The barbie house, made from large cardboard boxes, requires almost no financial outlay, and new rooms and floors can be added to it at any time.
plywood or wooden house IK is very durable and with careful handling will serve the child for several years.
In a light and comfortable textile house, Barbie doll can travel with her little mistress.
A doll housing made from an old locker can be closed at night with doors.
Tips: how to make a barbie house out of cardboard boxes
To build the structure, you will need several identical shoe boxes or just one large box from under any household appliances. It is desirable that the cardboard was dense, but its color does not matter.
Materials needed for work:
- PVA glue (preferably construction, not clerical);
- Scissors;
- Stationery knife;
- Plain or construction tape;
- Watercolor or gouache paints;
- Remains of wallpaper, wrapping paper, color pictures.
We glue the shoe boxes together so that we get two or three floors. And at the big box we cut off the top, leaving the sides 30 centimeters high, and from the remaining parts we make interior partitions. From two identical pieces of cardboard we make a roof and attach it with adhesive tape. Ceilings can be pasted over with white writing paper or polystyrene foam ceiling tiles. The walls are decorated with wallpapers, stickers, pictures. To strengthen the walls, the house is glued on the outside with thick cardboard, and the top is decorated with wallpaper, paper border, or simply painted.
Approximate plan of the house:
- 1st floor: garage (you can put a barbie car there) and a kitchen;
- 2nd floor: hall and guest room;
- 3rd floor bedroom and bathroom;
- Attic, where there will be a closet with things.
In the hall, you can equip a fireplace made of matchboxes or glued from cardboard. There is a lot to see on this subject. interesting videos, where everything is described in great detail and clearly.
A cardboard home-made house can be installed in a wide low box and equipped with a courtyard in it.
We study in detail: how to make a barbie doll out of paper with your own hands
A very interesting and entertaining toy is a Barbie doll made of paper. For her, you can independently make clothes, houses and accessories. This activity perfectly develops the child's creative abilities, as well as fine motor skills hands
Paper doll making:
- Download from the Internet or draw a doll template yourself;
- We cut out the figure, stepping back from the contours of 3-5 millimeters;
- We paste the doll on cardboard and cut it out strictly along the contour.
We draw clothes, hats, handbags and carefully cut them out. It must be remembered that small rectangles are attached to the clothes, which are then bent so that the clothes are attached to the doll.
If you stick a thin magnetic strip on the doll, and attach small metal objects to clothes and accessories, then there will be no need to draw a valve.
For paper dolls, you do not need to make voluminous houses, but just draw rooms with furniture in the album. Each individual sheet will be a new room.
Master class: how to build a house for barbie from plywood or wood
A durable plywood or wooden house can be made independently, having at hand necessary tools. The advantage of such materials is that you do not have to deal with interior and exterior decoration, since the wood has a very beautiful natural color and pattern. Against the background of such a house, it will not be a shame to conduct photo shoots, since it will look much more beautiful than its store counterparts.
Tools and materials:
- Hacksaw or jigsaw;
- Screwdrivers and screwdriver;
- Sander or fine-grained sandpaper;
- Drill;
- Sheets of plywood or boards;
- Finishing materials: wallpaper, paper, pieces of linoleum, etc. (optional);
- Carpentry glue or PVA;
- Self-tapping screws for wood;
- Pencil and ruler.
First, an exact diagram of the future house is drawn on paper, which is then transferred to plywood, carefully observing all dimensions.
Performing work step by step:
- All structural elements are carefully sawn out, door and window openings are cut.
- Connect side walls and overlays.
- The back wall and internal partitions are mounted.
- The roof is being installed.
Window openings can be trimmed plastic corner cut to fit the windows.
A wooden house can be foldable if equipped with an appropriate mechanism. Then it will not take up much space in the room. For example, door canopies are attached to the corner house, and it folds like a book.
How to make barbie dollhouses from improvised materials
When you need to quickly build a house for a doll, then any materials will be used. You can build a beautiful and comfortable home from a large Lego set, especially if available. a large number of details.
A compact house is easily made from a five- or ten-liter plastic canister. Windows and doors are cut out in it, and the canister itself is painted with paints or decorated with plasticine, salt dough, colored paper.
To prevent the child from injuring his hands, window and doorways are pasted over with adhesive tape or electrical tape.
We make a do-it-yourself barbie dollhouse from an old closet
Everyone in the household will find an old unnecessary closet, bookshelves or a rack. Can you breathe into them? new life, turning it into a convenient and beautiful house for barbie doll.
It should be borne in mind that the distance between the shelves should be about 30 centimeters, since the growth of Barbie is approximately the same.
Materials needed for conversion:
- Wood putty;
- Primer and paint oil or acrylic;
- Scotch masking;
- Brushes of different sizes;
- Colored or wrapping paper, pieces of linoleum, fabrics, oilcloth.
The locker is cleared of old paint, cracks are sealed, and then the entire surface is primed and covered with two layers of paint. On the outer walls, you can draw windows, bricks, patterns, branches of ivy or wild grapes. Partitions are installed inside. Then each room is decorated depending on the wishes of the little mistress of the dollhouse.
Every girl dreams that her favorite Barbie doll has a beautiful and cozy house. Of course, you can buy it in the store, but the price is often not happy. We suggest you make a house with your own hands. You can easily cope with this, and your daughter will be only too happy to help. In addition, for its construction, you can use almost everything that is at hand!
Materials and tools
Whatever model of house you choose, during construction and decoration you may need the following tools:
- glue "Moment" or PVA, depending on the material;
- scotch;
- scissors;
- paints and brushes;
- colored paper or anything that can replace it (stickers, wallpapers, pictures);
- ruler or tape measure.
For interior decoration, scraps of fabric, fur or leather, beads and beads, bamboo sticks and whatever your fantasy tells you will come in handy. But the main question is what to make the walls of the house. It turns out that there are also a huge number of options. You can use cardboard boxes, scraps of plywood, fiberboard or drywall, boards, and even old furniture!
You can even make such a house for a doll yourself from improvised materials.
The house can even be two- or three-story, horizontal (without a roof and with a top view) or vertical (with a removable front wall), simple or complex to manufacture, requiring certain skills in carpentry. But in any case, its construction and arrangement with their own hands will become an exciting activity for the whole family. In addition, you can make furniture and interior items for the dollhouse yourself from the same improvised means.
House made of fiberboard
You can easily make such a house model from fiberboard or drywall by gluing the parts with PVA glue. Most likely, you don’t even have to buy anything: many have surpluses of building materials after repairs. You will also need:
- cardboard;
- wallpaper;
- colored paper;
- bamboo slats (you can get them from the hot stand).
A house for Barbie can be made from fiberboard or drywall by gluing the parts with PVA glue
The peculiarity of this house is that in addition to three floors it has an attic. We proceeded from the following dimensions: height - 65 cm, floor area - 16 X 28 cm. You can calculate the parameters suitable for you and draw a diagram according to which you will make a house.
Calculate the parameters of the future house and schematically depict it on paper
Note! Before proceeding with the calculations, decide where the house will be located. Often such products are in one place. The design should not take up a lot of usable space, “clutter up” the room and get in the way.
According to the sketch, cut out the walls, roof and partitions between floors.
Cut walls, roof and partitions between floors
Connect all parts with PVA glue.
If the PVA glue is not thick enough, you can add some sawdust for extra strength.
Cover the roof of the house with corrugated cardboard.
Cover the roof of the house with corrugated cardboard
Decorate the walls of the house from the outside with colored paper. Glue on the bamboo strips.
Decorate the exterior of the house with colored paper and bamboo strips
You can decorate the basement to make the house look more elegant. For example, stick "bricks" previously cut out of colored cardboard.
The plinth can be decorated with cardboard 'bricks'
Glue the entire building onto a frame made of fiberboard or plywood. It should be larger than the floor of the first floor. Firstly, it will give stability to the house, and secondly, it will be possible to organize a “flower garden” on the frame.
Glue the house on a frame made of fiberboard or plywood
Cut out window frames from thick cardboard.
Cut out window frames from thick cardboard
They need to be glued on both sides.
Glue the frames on the windows on both sides
Make a balcony. Use thick cardboard for the floor and railings, simple toothpicks will serve as balusters.
Cut out a balcony door from thick cardboard
Wire hooks can be attached to the railing. Hang a cardboard box with toy flowers on them.
The balcony can be decorated with a toy flower garden
Insert an attic window.
Decorate the attic window
Making the front door is also very easy. It is enough to paste over the cardboard base with a picture cut out from the brochure. The handle can be made from plasticine.
In order to create the effect of a grassy lawn around the house, glue the frame with the hard parts of ordinary kitchen washcloths. Make flowerbeds out of cardboard boxes and “plant” them with plastic or paper flowers.
Interior decoration
From the inside, the house must also be beautifully finished to match its mistress - the most beautiful and fashionable Barbie doll.
Paste the walls with wallpaper, colored or wrapping paper, it depends on the purpose of the room. Colored cardboard, cellulose kitchen napkin (it imitates carpet), fabric with a soft texture are suitable for the floor.
Finish the interior of the house with wallpaper, wrapping and colored paper, cellulose kitchen napkins
Ceilings can be pasted over with white paper.
Be sure to make curtains by hanging them on bamboo strip cornices.
From cardboard boxes
For such a house you will need:
- cardboard boxes - by the number of rooms;
- glue - you can use a stapler or double-sided tape;
- wallpaper, colored paper, magazine clippings, organza, fabrics - for decoration.
If this model is too large for your living space, you can make a folding house that is easy to make and very compact. To do this, it is enough to connect two cardboard sheets crosswise into the grooves. Cut through the doors in the walls, cover the “rooms” with wallpaper and pictures and celebrate housewarming with your favorite doll and her friends.
Do compact house from cardboard, connecting two cardboard sheets crosswise into grooves
From plywood
This option is more difficult than the previous ones, you will need patience and the ability to work with tools.
Dollhouse plywood ik is more difficult to manufacture, but the result is worth the effort
For a plywood house you will need:
- hammer;
- jigsaw;
- nails;
- sandpaper;
- primer;
- dye;
- wallpaper or adhesive film.
Consider the layout of the house. Saw out details from plywood. Use the drawings below or come up with your own project. You can change the dimensions as you wish. Just remember to keep the proportions.
Be sure to treat all surfaces sandpaper so that the child does not get hurt on the burrs during the game. Gather all the details according to the plan.
Gather all the details according to the plan
Attach the back, front and side walls to the top of the base. Cut out windows. Their dimensions are 9 X 6.25. A triangular window of the same width as the others, and its shape and height must be calculated according to the angle of the roof.
Cut out the windows
A plywood house needs to be hammered together with nails.
Glue will not work here: PVA is unlikely to hold the parts together firmly enough, and Moment will look sloppy at the joints.
Cover the gaps formed between the parts with a primer.
Paint the outside of your house the right color.
Paint the house outside
Paint interior surfaces, wallpaper or self-adhesive film- optional.
Paint, wallpaper or self-adhesive the dollhouse's rooms
You can lay felt, fleece or carpet on the floor. Furnish the house with furniture and call Barbie for a housewarming party!
You can make the front wall of the house in the form of opening doors.
The front wall of the house opens like cabinet doors
An ordinary Christmas tree garland will provide lighting in the rooms.
With the help of a Christmas tree garland, you can make lighting in the house
From old furniture
Consider the option of creating a house for Barbie from an old chest of drawers. Please note that such a massive thing will require a lot of space in the room, its mobility or compactness is out of the question. But such a house is strong and durable.
Every princess dreams of her own dollhouse. Now, in the modern world, you can buy such a house in any children's store, but the price is too high for it. Therefore, there is a simple and budget solution - to make such beauty yourself. You don’t need to buy anything specifically for this, you can use all the tools at hand: the remnants of old wallpaper, bamboo sticks, beads, plastic, fabric and much more.
The most important thing is to draw a sketch correctly, and decide on the dimensions.
We take fiberboard sheet and cut everything necessary details: walls, roof and floors of our floors. We carefully glue all the parts with PVA glue. Sometimes sawdust is added to it for strength, but if your glue is thick, this will be enough.
We glue the roof of the house with corrugated cardboard of any color.
We disassemble the bamboo kitchen napkin into parts, for exterior finish our home.
On the first floor, for decoration, we glue the “bricks” previously cut out of cardboard.
We take a large sheet of fiberboard, for stability, and glue our entire finished house to it.
Now we proceed to the most time-consuming process - sculpting various accessories from plastic. These will be various flowers, dishes, products, accessories for home interior.
We cut out frames for windows from cardboard, and glue them on both sides (outside and inside).
We glue cardboard window sills on the ends and decorate them with pots of flowers on top.
Next, we make a balcony. We take toothpicks and stick them into the cardboard on both sides, into the floor and railings (see photo). And on wire hooks to the railing we hang a cardboard box in which there are molded flowers.
We insert a dormer window (it can just be a thick cover for a book or notebook).
Pasting front door. You can print a picture of the door and stick it to the desired place. The handle is made of plastic.
We glue the grass lawn from hard green washcloths. We make small flowerbeds from cardboard boxes, and insert flowers molded in advance from plastic into them.
The interior of the dollhouse.
Living room
We paste over the walls with colored cardboard, take a cellulose kitchen napkin on the floor, a suitable pattern, for the ceiling you will need plain white paper.
After we glued the ceiling, we hang the chandelier - make a hole in the fiberboard with an awl (but not through, so as not to accidentally crawl out onto the floor of the upper floor) and glue a wire ring to hang the finished chandelier.
Children's room
We paste over the walls with gift paper, for wrapping, with a pattern of a children's theme. If not, we take any paper with a children's drawing. We glue colored cardboard on the floor, which resembles a laminate.
We make cornices for curtains: we put the curtain on a bamboo skewer and insert it into the fasteners on the wall from thin strips of cardboard. We hang a chandelier on a wire ring.
Kitchen
We paste over the walls with a napkin with the desired pattern, or we take the remnants of real wallpaper, as in this case.
We fasten the curtains in the same way as in the nursery; for beauty, you can sew on tiny home-made plastic buttons. We hang the chandelier on a wire ring. We take a ruler and draw a “tile” on the floor.
Bathroom
Draw the floors and bottom of the walls with a gel pen, imitating tiles. For the top of the walls, take a paper table napkin with a "marine theme". Glue it to the cardboard for strength, glue our walls.
Shops offer customers a wide range of all kinds of toys, including doll houses. Every girl dreams of getting one of them, while parents can easily make a beautiful and durable doll house in just a few days. Moreover, the child will be able to take an active part in the process and express all his wishes about the size and design. To make a do-it-yourself dollhouse out of plywood, you will need a diagram that you can draw yourself or find a ready-made one on the Internet.
We make a drawing of a plywood dollhouse with the dimensions of all structural elements
A toy house and plywood cannot be built without a detailed drawing, on which the dimensions of all its parts will be applied. To do this, you must first determine the approximate dimensions of the future house, and imagine what shape it will be.
When reducing or increasing the design, it should be remembered that all dimensions should also be proportionally changed.
The house consists of the following parts:
- Back wall: has the shape of a pentagon. Its sides are 76 cm, and the base is 106 cm. The upper side is an uneven triangle, the top of which is at a height of 91 cm.
- Floor: Rectangular. Its dimensions are 106x38 cm.
- Overlapping of the second floor: a rectangle with dimensions of 104x36 cm.
- Side wall (2 parts): is a rectangle 36x76 cm.
- Inner wall on the right side: rectangle 25x50 cm.
- Inner wall on the left side: rectangle 25x43 cm.
- Left side of the roof: rectangle measuring 76x39 cm.
- The right side of the roof: a rectangle with parameters 45x39 cm.
How to make a house for a doll with your own hands from plywood: a step by step guide
After cutting out the parts with a jigsaw or a hacksaw, you need to carefully process them with fine-grained sandpaper, and then proceed to assembly. At this stage, windows of arbitrary sizes are cut out and also carefully processed with sandpaper.
Making a house step by step:
- The side walls are attached to the base with the help of self-tapping screws and building glue, and then the ceiling of the second floor and internal partitions.
- The roof is being installed.
- Decorative tiles made of cardboard, colored paper or other materials are glued onto the roof.
- Next, the house is painted with paints (acrylic, gouache, watercolor);
- The rooms are pasted over with wallpaper, fabric, film.
- The floors are covered with pieces of linoleum, laminate, carpet, felt.
- Furniture and interior items are arranged.
Near the house, you can make a small garden, placed in a box, in which trees cut out of cardboard will grow.
If the parts were not cut too evenly and a gap formed between them, then it can be covered with wood putty and then painted over.
How to assemble a plywood house for children with your own hands easily and quickly
A small plywood house designed for games will appeal to any child. After all, he will have his own space there. It is not difficult to assemble such a design yourself if you first make drawings and cut out the details.
What you need for work:
- Sheets of plywood, the thickness of which is not less than ten millimeters. The required quantity is easy to determine by adding up all the areas of future parts.
- Beam for the frame size 40x40 or 50x50 mm.
- Plexiglas or plastic for windows.
- Canopies for doors.
- Finishing materials (wallpaper, non-toxic paint, putty).
Blanks are made from timber and plywood and sanded with sandpaper until completely smooth. The frame is assembled from a bar, and plywood blanks are attached to it. Next, windows and doors are installed. Then the house can be painted inside and out or wallpapered. Furniture is being brought in. From the remnants of plywood, you can make decorations and install them around the house. The children's play house is ready.
Fasteners must be hidden so that the child cannot be injured.
We make a plywood castle with our own hands: drawings and recommendations
Plywood is one of the easiest materials to process, so it can be used to make not only simple houses, but also beautiful castles for princesses and knights. To do this, you need to be patient and carefully draw every detail of the future castle. The drawings are made by analogy with the drawings of a dollhouse, but towers, balconies and terraces are added to the details. There are a lot of themed sites interesting models which are easy to build yourself.
Tools needed for work:
- Simple pencil;
- Ruler (simple and curly);
- Electric jigsaw;
- Screwdrivers or screwdriver;
- Hammer;
- Sandpaper;
- Tassels;
- Fasteners.
Ice cream sticks can be used to fence balconies.
Beautiful plywood doll furniture: drawings and manufacturing methods
Plywood can be used to make almost any piece of furniture. toy house: beds, tables, chairs, cabinets, sofas, shelves. The furniture made according to the drawings turns out to be quite large, so it is suitable for both Barbie dolls and baby dolls.
Furniture parts can be glued or connected with self-tapping screws and furniture studs. Basically, plywood is taken, about 4 mm thick.
What you need to make furniture:
- Pencil and paper;
- Jigsaw manual;
- Fine sandpaper;
- Liquid nails or wood glue;
- Paints and varnish.
When assembling small furniture, it is better to use glue, because fasteners can damage parts.
For all furniture details, you first need to draw and cut out a template. Then circle it on plywood and cut out structural elements with a jigsaw. Edges are frayed. The parts must be connected together, and then painted and varnished or upholstered with a cloth using a stapler.
We make a plywood house for a doll with our own hands (video instruction)
From plywood, you can make durable and beautiful toys that will please the child for a long time. With drawings, free time and a modicum of patience, this will not be difficult even for those who do not have any skills in this matter. And by showing imagination, you can create real masterpieces that will cause surprise and delight not only in the child, but also in others.
Every girl dreams of having a big house for dolls. If you want to give a child such a dream, then make it with my own hands. How? Read the article.
Currently, toy stores sell not only dolls, but also a lot of products and things for them. The most interesting thing is that for your favorite doll you can buy not only a car, but also a whole house with a lot of rooms. However, this purchase will cost a lot of money.
But after all, you can make a house on your own, and from different materials. Housing for your favorite dolls, made with your own hands by the whole family, will be a joy to your child. Especially if he takes an active part in its manufacture.
How to make a dollhouse for Barbie with your own hands?
There are many options for Barbie doll houses that are sold in online stores. However, you want your doll house to be completely different from others. To do this, apply your skills and turn on your imagination.
Materials for the product:
- Laminate, wallpaper remnants
- Pieces of old carpet, carpentry glue, water-dispersion - Moment
- Electric jigsaw
- Corrugated cardboard, colored, to make a roof
- Scotch tape, preferably double sided
- Roulette, ruler, pencil
Progress:
- Start by making a drawing on paper with exact dimensions.
- Then cut the laminate according to these patterns.
- You should get three walls (two - side and one back, and the back will consist of several laminate plates).
- You will also need horizontal plates - ceilings between the floors of the house and vertical ones - dividing the rooms of the Barbie doll.
- Make a roof, decorate it with colored corrugated cardboard.
- Glue the resulting design with glue.
- Then wallpaper the rooms and lay pieces of carpet on the floor.
- Decorate the walls with small children's drawings. Put furniture for dolls.
Do-it-yourself doll house for Monster High?
Many girls prefer to play with Monster High dolls. Houses for such dolls are not as glamorous as those of Barbie. Pink wallpaper on the walls will be useless for gloomy Monster High. Dark wallpapers are more suitable for them, preferably with cobwebs in the corners of the room and skull lamps on the ceiling.
Materials, tools:
- Glue, cardboard box, scissors
- Paints, wallpapers, felt-tip pens, colored pencils
- Furniture material (plasticine, foam rubber, fabric, etc.)
Progress:
- Cut off the extra parts of the box, leave only the walls for the apartment of the Monster High dolls.
- Divide the rooms of the apartment with a partition from cardboard box like in the picture above.
- Now carefully paste over the rooms with dark, strict wallpaper. It is desirable that the wallpaper in different rooms were different from each other.
- To decorate the interior, you can use black tulle or lace fabric. Furniture should also be made in black colors. In such a house your doll will be comfortable.
Do-it-yourself plywood dollhouse: a diagram with dimensions
If you have an idea to make a plywood house for your daughter's dolls with your own hands, then below you will learn in detail how to implement this idea.
Materials, tools:
- Plywood (thickness 7 mm), jigsaw
- Joiner's glue, PVA glue
- Adhesive tape (mounting), corrugated cardboard roof
- Self-adhesive film for beautiful design floors in the rooms of the house
- Wallpaper with a pattern for the walls of rooms
- Pencil, ruler, tape measure
Progress:
- Cut plywood sheets to size, as in the diagram above.
- Carefully cut windows, doorways on the received parts
- Spread the ends with glue, assemble the structure, as shown below
- You can nail small nails to make sure that the house is securely fixed.
- Make a roof, glue corrugated cardboard to it
- Decorate the rooms of the house with wallpaper and self-adhesive tape
- Then it remains only to make the furniture in the dolls' rooms and decorate the interior with useful little things.
Do-it-yourself doll house made of cardboard: drawings
Cardboard comfortable material for such products. From it, mothers will be able to make a house on their own, for this you only need patience, perseverance and time.
Material, tool:
- Cardboard or cardboard boxes
- Double-sided tape, glue
- Colored paper for decorating the house
- Scissors, simple pencil, ruler
Progress:
- Using a ruler and a pencil, draw the details of the house, as in the diagram on cardboard.
- Scissors cut the resulting "pattern"
- Immediately mark where you will have windows, doors and carefully cut them out as well.
- Glue the design with adhesive tape
- Before gluing the roof, make interior decoration and the outer walls of the house paste over with colored paper
- Then just do the roof
How to make a dollhouse out of a box?
If you have abandoned boxes lying around, then use them. Please your girl with a new long-awaited toy - a house for dolls.
Moreover, for the manufacture of the product you will need only a few hours of your time. You will only need to make a room for the doll with a window and a door from each box. And then glue these rooms into a single house.
Do-it-yourself wooden doll house: drawings and dimensions
A wooden house for dolls will turn out to be very durable and will look as natural as possible. Your daughter will love this house for sure.
Materials, tools:
- Use any wood-based material (plywood, MDF, fiberboard, etc.)
- Jigsaw, small nails, wood glue, PVA glue
- Double-sided adhesive tape, gouache paint
- Wallpaper, flooring or self-adhesive tape
- Ruler, pencil, tape measure
Progress:
- Cut out three walls with dimensions as in the figure below (dimensions are given in millimeters)
- Then cut the horizontal and vertical overlaps
- Make a window a door in the house
- Assemble the structure, for this, glue the ends at the joints and nail small nails
- Separately saw the roof out of wood
- Then first decorate the interior of the room, and then attach the roof to the house
- Do exterior finish corrugated board roof
How to make a light in a dollhouse?
Every house should have lighting, and the dollhouse should have it too. Next, we will learn how to make it yourself.
Materials, tools:
- Pliers, wire cutters, wires
- soldering iron
- Box for power source
- microswitch
- Small light bulb with socket
- Finger batteries (2 pieces)
Progress:
- For a small 3 Volt light bulb, you will need two batteries; it is not difficult to buy such products on the market.
- Battery boxes are also sold separately.
- Now let's take a closer look at the connection diagram. One wire coming from the box must be soldered to the bulb base.
- Solder the other wire (free) to the bottom of the lamp first.
- Then empirically - find which of the three contacts of the microswitch is suitable for turning on a small light bulb. To do this, apply the wiring coming from the box and the lamp to the contacts of the switch. The switch mode should be on the label - ON.
- If the light is on, you are on the right track. Feel free to solder the wires to the desired switch contacts.
