Every girl can spend hours playing with her favorite dolls and toys. In the past, you could often find your father in the garage, carefully building Dollhouse IR for my beloved daughter.
After all, such a gift was the ultimate dream of any little princess. It is worth noting that in those days it was much more difficult. There was not such an abundance of cheap and available materials, from which one could easily build a palace for dolls.
Today we will present you 12 dollhouse projects for your little angel.
DIY projects of houses built from scratch
Ana White's first DIY project is a kid's dream. It includes three floors with seven rooms, including a bathroom and a toilet.
The entire structure is made from natural and environmentally friendly materials, so nothing will harm the child’s health while playing.
There are also special rollers that will make moving the structure around the room much easier. The height of the house is designed for a standard Barbie, so there will be no problems with choosing a suitable doll, and your girl will be satisfied!
Another idea from Ana White. Unlike the previous one, it is designed for smaller dolls. But this house is more detailed interior decoration and furniture. The idea of using family and children's photographs as decorations is especially well applied here.
Here we see a slight modification of the first project. A caring father decided to please his daughter with a gorgeous Christmas present! If you make a house yourself, the number of floors and rooms is limited only by your imagination and capabilities. A huge advantage in its creation will be taking into account the wishes and preferences of the child.
This amazing project from Young House Love delights with its simplicity and magnificent design. Due to the open front panel, the house is very convenient to use. In order to secure it and protect it from falling, it can be easily attached to the wall.
The interior decoration of the rooms looks especially beautiful. A variety of colored paper and highly detailed furniture are used to create the design.
The next DIY project is similar in design to the previous one. However, the designers from Under the Sycamore decided to use vintage fabrics with colorful patterns as wallpaper.
Such a house can be an excellent gift for a daughter, granddaughter, younger sister or niece, and adding a few sentimental accents will make it even more meaningful and dear to the heart.
Give your furniture a second life by turning it into a Beautiful Dollhouse
Naturally, not everyone has enough time and skills to create a complex DIY project from scratch. However, do not despair, you can find a way out of any situation!
To create a house, you can easily use old and unnecessary furniture, because having a ready-made frame, it is much easier to design and decorate it than to start all over from the very beginning.
Here we see an amazing bookshelf transformation idea from Simple as That. Everything looks very nice and neat. Several shelves can be turned into miniature furniture and used for games, while others are useful for storing things and toys.
Do you want to please your daughter with a long-awaited toy without resorting to serious expenses? Then feel free to start designing a tower of CDs. All you need is to build a roof, cut out some windows and add a couple of decorative elements.
Then cover the structure with several layers of paint. Here is a wonderful Delightful dollhouse and it’s ready!
Another design option for such a tower. This time using natural wood. This house is perfect for playing in the garden or yard. You can also please your daughter with dolls and furniture self made, unless of course you have certain carpentry skills.
The next idea was kindly presented by the designers from Neon Fresh. To do this, it was necessary to fasten two bedside tables, and use sheets of plywood to create partitions for the floors and interior walls.
Finally, the interior and exterior of the future house are decorated and the rooms are filled with furniture. All! Awesome DIY project is ready!
Thinking outside the box
Do you want to surprise your child with something unusual? Try this idea from Hart and Sew. It is a portable house in a suitcase. This idea allows you to make an interesting and comfortable house for dolls, into which you can put all the toys away after finishing the game.
In addition, it is very convenient to move around the room. Such a functional house does not take up much space; you can even store it under the bed.
The next project is just for those who have absolutely no space for massive structures. You'll need some sewing skills to recreate this idea from Checkout Girls. The whole point is that the furniture is held on by Velcro and can be easily moved from room to room. The panel is hung on the wall, which organizes space for games and creativity.
A grand solution for a dollhouse
This is a truly grandiose and magnificent project that has no analogues. It took Mad’s Mouse House designers 11 months to create the house. This is not just a toy, but a real work of art, one might say, a museum piece!
It hits everything: general design, created from old logs, and a huge number of floors and rooms. Look at the interiors and furniture! Everything looks so natural, as if reduced copies exactly replicate the originals.
Such a masterpiece will be the best gift for your daughter, and will become one of the most significant events in her life.
We hope you have received enough ideas for creativity, met the inspiration that has come and are already rushing to the garage or workshop to please your girl with an amazing gift for the next holiday.
Remember the main thing: a little patience, and you will succeed! Approach the process creatively and with love. Then this house will give your child a lot of impressions and memories for a lifetime.
All girls play with dolls. The game will become even more interesting if, in addition to the main characters, the little housewife has a variety of accessories and furniture. A wooden dollhouse is very useful thing, which perfectly develops the child’s thinking and creative abilities. Where to buy a toy house and how to choose, or is it better to make it yourself?
Which one should I buy?
In any modern toy store you can see such houses of various sizes and configurations. For Barbie dolls and their analogues, plastic products are most often offered. But wooden house puppet - a toy that is more durable, environmentally friendly and convenient for interior decoration and all kinds of alterations. You can also find such houses for sale. They are usually offered to customers in disassembled form and are a construction set that can be assembled once and fixed, or assembled and disassembled many times. When purchasing such a toy (from any material), carefully study the dimensions finished house, they are usually indicated on the packaging. Remember that you can find houses of different sizes for sale, each of which is suitable only for “tenants” of a certain height. In many regions of our country, you can also order the production of a doll's home and furniture for it from wood. Many salons of handmade furniture and interior items offer a similar service.
From project to finished house
It’s easy to make a variety of them yourself. To do this you will need a minimum set construction tools and simple home craftsman skills. Start with a sketch - draw on a piece of paper the desired configuration of the future craft, mark the number of rooms and their location relative to each other. A wooden dollhouse can be made in the form of several boxes or have a more complex shape with a detailed facade, carved windows, internal stairs, beautiful roof and decorative cornices. It all depends on your skills and desires. When the project is ready, you need to make paper templates for all necessary details real size. After this, you can start cutting them out of the selected material.
Selection of building materials
If you already have unwanted boards or plywood, you can use them to make Otherwise, you should go to hardware store go shopping. The best option- dense MDF, plywood or equivalent. Try to calculate correctly in advance required amount material. For fastening individual elements Use small nails between each other. All joints can be additionally coated with sealant. A wooden dollhouse can be painted and wallpapered. Buy specially Decoration Materials It doesn’t make sense, they will probably be found in any home.
Decorative finishing
When the house is assembled, you can move on to its decor. External facades can be left natural or painted. If you plan to paste interior rooms wallpaper, do not be lazy to apply a layer of primer. For decorating “rooms” you can also use plastic and foam panels and any other materials remaining after repairs. Flooring It is also better to glue it to the base, in this case it will not slide.
You can make windows inside the house. If you didn't cut them out, just select suitable pictures from a magazine, print them on a printer, or draw them and cut them out. Then glue them directly to the walls. You can add real textile curtains and curtains. Try using the appliqué technique to make paintings, panels and any other objects that decorate the walls.
Wooden dollhouse: photos of interiors and decoration
The final stage of arranging housing for dolls is arranging furniture and moving in happy “residents”. This important task can be entrusted to the child personally. A variety of ready-made furniture can be found in any toy store. Choose sets and individual items according to your taste, judging the sizes correctly. You want all the new things to fit into your existing wooden dollhouse?
You can also make furniture with your own hands. Use leftover plywood and thick cardboard for this. Manufacturing is a process similar to building a house. First you need to make patterns from paper, after which you can start cutting out elements from dense material and assembling them. It’s not at all difficult to sew textiles for a playhouse from multi-colored scraps and pieces of fabric. Don't forget to make bed linen, rugs and other necessary items. Arrange the furniture in the rooms, add small accessories - and you can celebrate a housewarming party. Now you know how to make a wooden dollhouse. You can be sure that your child will definitely appreciate such a toy!
Every little girl has at least a dozen dolls different models and sizes, so sooner or later the question of buying a toy house for them comes up. You can find the required accessory in stores, but the price for it may be prohibitive for the budget of the average family. Moreover, most toys are made of fragile plastic that quickly deteriorates. The best solution would be to build a beautiful and durable doll house yourself from inexpensive materials. The little housewife, who will certainly enjoy this activity, can also take part in the design and layout of the rooms.
Whatever material the dollhouse is made from, there are several rules that must be followed when building the product.
Requirements:
- Safety. The design should not have sharp corners or protruding parts that could injure a child. It should be remembered that you can cut yourself even with a sheet of plain paper if it is glued in the wrong place.
- Reliability. All parts of the house must be firmly attached to each other, ensuring the strength of the entire structure. Children, especially those under three years old, can play with the house too actively, so it is better to strengthen the walls additionally.
Making a dollhouse for kids younger age, it is not recommended to use small pebbles, beads, and sequins when decorating rooms, as a child can swallow them or insert them into the nose and ears.
You can make a house for dolls from cardboard (cardboard boxes), plywood, MDF, old bookcase, rack or chest of drawers. Textile houses, fully sheathed, are in separate demand. soft cloth. The downside is that they usually small size, but you can take them with you on trips and let children under three years old play with them.
The cheapest structure will be made from cardboard or thick cardboard boxes, for example, from a TV or refrigerator. And if you decorate a house beautifully inside and out, not every person will understand what material it is made of.
A house made of plywood, wood or MDF will serve its little mistress long time, because it will be made of durable materials that are resistant to stress.
Practical tips: how to make a doll house from a bookshelf or shelving unit
You can convert a shelving unit or bookshelf into a doll house without spending a lot of time and money. For these purposes, also suitable small lockers from ikea, 1 - 1.2 meters high, with two or three shelves. The distance between the shelves should be about 30 cm so that dolls like Barbie or Monster High can easily fit there.
Materials, which will be neededfor work:
- Boards or sheet of plywood for the roof (the width should match the width of the cabinet);
- MDF or plywood from which the new back wall will be made;
- Several small photo frames that will act as platbands for windows;
- Construction glue PVA or carpentry glue (you can use liquid nails);
- Putty;
- Paints (acrylic, watercolor, gouache);
- Pieces of wallpaper, colored paper (to decorate the walls);
- red or cardboard Brown from which the tiles are made.
You will also need brushes, a drill, a screwdriver or screwdriver, wood screws, and a jigsaw.
If the cabinet you are using is old, it must first be cleaned and painted. The renovation begins with the installation of windows. To do this, first markings are made, and then rectangular openings are cut out using a jigsaw and frames are installed. Next, a roof is assembled from two boards or pieces of plywood, screwing them to each other at right angles. Immediately glue tiles cut from rectangular pieces of cardboard onto it. The roof is screwed on top, and then the rear panel, cut to size, is installed. The next step will be installation internal partitions. Next, you can start decorating the rooms. You can also make furniture yourself from scraps of plywood, or buy ready-made sets from IKEA.
Quick and easy: how to make a doll room from a shoebox
For small dolls 5-12 centimeters high, you can build a beautiful and comfortable room from an ordinary shoebox in a matter of minutes. The inside of the box is covered with the remains of wallpaper (it is better to take one with a small pattern or ornament). You can cover the walls with fabric or corrugated paper.
To leave more space in the box, you can simply draw some furniture on the walls or stick pictures cut out from magazines. That is, let the beds and chairs be real, and the windows, bookshelves, fireplace, vases with flowers - painted.
What is needed for work:
- Box;
- Wallpaper, colored paper, pictures;
- PVA glue;
- Paints and brushes;
- Pieces of fabric;
- Scissors;
- Stapler.
The bottom of the box is covered with a piece of carpet or linoleum.
DIY horizontal house from a box in half an hour
A children's dollhouse can be made not only in a vertical section, but also in a horizontal one. That is, the view of the rooms will be from above. This will require a large cardboard box, as well as a minimum set of tools and materials. You can make such a house in half an hour, with almost no effort. Even an 8-10 year old child can easily cope with this task. For girls and their mothers, making crafts will be a pleasant pastime.
What is necessary:
- Large cardboard box;
- Scissors and stationery knife;
- Multi-colored or any plain adhesive tape of a bright color;
- White marker.
The box is cut into two parts with a stationery knife so that the height of the sides at the bottom is 20 - 25 centimeters. Partitions are made from the remaining cardboard and glued with colored tape. The walls are painted with white marker. From cardboard scraps you can make miniature armchairs, sofas, tables, and other accessories.
The stationery knife is very sharp, so you need to use it with extreme caution.
Do-it-yourself textile toy house from scrap materials
The small textile house is mainly used as a bag for carrying dolls. It looks bright and impressive thanks to the use of colored fabrics and applications.
What is needed to make a textile bag house:
- Fabrics for interior and exterior decoration;
- Sheets of cardboard or plastic for making a frame;
- Soft filler (batting/foam rubber/cotton wool/sintepon);
- Fasteners (buttons/elastic bands/Velcro);
- Scotch.
To prevent the house from being too heavy, it is recommended to use thick cardboard or mesh plastic for the frame.
First cut plastic bases, then they are wrapped in a soft backing, which is secured with tape. Next, all parts are covered with fabric and fastened together. The future bag is decorated inside and out and the fasteners are sewn in the right places. You can put one or more dolls, a small book, and dishes in the house bag.
We make a dollhouse from wood or plywood
A wooden house for dolls is considered the most durable and reliable. To build it, take a board, solid wood or plywood sheets. First, the necessary drawings are made, according to which sheets of plywood or MDF are then cut. All dimensions must be strictly observed so that the house turns out beautiful and even.
If a wood-laminated board is used in the manufacture of a house, then the marking on it should be E0 (absence or minimum content of formaldehyde in the composition). The thickness of the material must be at least 10 mm.
Tools needed to make a wooden house:
- Electric or manual jigsaw;
- Screwdriver or screwdriver;
- Hacksaw;
- Sandpaper with fine abrasive;
- Hammer;
- A simple pencil and ruler.
All parts are cut out and thoroughly sanded so that the child cannot get hurt. Then the structure is assembled: the walls are screwed with self-tapping screws or nailed with furniture nails, and the seams are glued with PVA construction glue. Then each room is decorated with scraps of wallpaper, fabrics, pictures, and stickers. A staircase or elevator can be installed between floors.
Simple master class: plywood dollhouse
The process of assembling the structure includes several stages that must be strictly followed, otherwise the house will not be durable and will quickly become unusable.
Step by step guide:
- Marking on plywood sheets details of the future dollhouse.
- Sawing out all structural elements.
- Sanding the cuts with fine sandpaper.
- All parts of the structure are glued together with wood glue, and the joints are fixed with tape. The back wall is glued last.
- Partitions are being installed.
- The roof is glued on top and decorated with tiles made from cardboard, pieces of felt, shells, etc.
- The walls are painted.
- A self-adhesive film with a wood pattern is glued to the floor.
- Stairs are made from wooden rulers or planks and installed.
- Furniture items are being placed.
A school is also built on the basis of a dollhouse, but the classes are made the same in size and desks are installed in them.
Dollhouse (video instruction)
A dollhouse built with your own hands with the participation of a child will bring him a lot of joy. Review of several design options made from different materials, showed that everyone can create an exclusive toy house for dolls, embodying their most bold ideas and with a little effort and imagination.
A doll house is every girl's dream. Here they are ready to play selflessly for hours, without suspecting that they are gradually preparing themselves for the future role of wife, mother, mistress of the house. And it’s not difficult to bring such joy to a girl.
Alexander Zalivako from Moscow shares his experience.
Is it possible to compare the building children's house with real construction? It's a toy house. But, as practice has shown, the approach in both cases should be equally serious and competent in engineering, constructive and technical terms. I used FC plywood as the material for making the house (Fig. 1). For the side walls, shelves (floors) and partitions I chose plywood 8 mm thick, for the back wall - 3 mm thick.
Minimum set of tools
For the manufacture of parts and assembly DIY dollhouse You will need a jigsaw, a drill (preferably with a stand), a fine-toothed hacksaw, two clamps, a file, and a soldering iron. Having a hand-held circular saw will speed up the work significantly. In addition, you will need a screwdriver, hammer, nails, screws and glue.
Materials for a toy house
Two sheets of plywood: 1,525 x 1,525 x 8 mm and 1,525 x 1,525 x 3 mm (for ease of transportation, plywood sheets are each cut into two parts: 950 x 1,525 x 8 mm and 575 x 1,525 x 8 mm; 1 000 x 1,525 x 3 mm and 525 x 1,525 x 3 mm).
Slats: round 0 6x1 000 mm, square 10x 10x 1 500 mm.
Components for organizing lighting in a homemade dollhouse.
Ultra-bright LEDs (size 5050, light - warm white, 3,000 K); 34 core FRC flat cable; toggle switches MTS-102 A1; resistors; PBS 5-0.5 power supply with 2.5 plug; power socket for panel DS-026C 2.5. The value of the resistor R (Ohm) depends on the voltage drop across the LED Ud (V) and the current consumption I (A):
R = (Upit – Ud)/I In this case: Ugbn = 5 V; Ud = 3 V; I = 0.035 A, then (5 – 3)/0.035 = 57 Ohms, choose the resistor of the closest value: 56 Ohms. If three LEDs are installed in parallel, the current increases 3 times - accordingly, the resistor value is reduced to 18 Ohms.
Rice. 1. Assembly diagram and main dimensions of the dollhouse.
Rice. 2. Dimensions and shape of the house partitions. Fig. 3. Shelves (interfloor ceilings) and side walls are cut out of 8 mm plywood.
Making toy house parts
When marking the parts of the house, you must not only take into account their rational location on the sheet, but also remember that with FC construction plywood, usually one side can be cleaner and neater than the other. So, the finished side of the shelves and roof should be on top, and the side walls should be on the outside.
Eight partitions (Fig. 2) are made from rectangles measuring 247 x 200 x 8 mm, making the necessary cuts with a jigsaw, and then carefully finishing the edges with a file.
The shelves (interfloor ceilings) are cut with a hacksaw (four rectangles measuring 247 x 894 x 8 mm and one rectangle measuring 222 x 894 x 8 mm). The width of the bottom shelf (Fig. 3) is selected according to location (due to the presence of a plinth). In the upper shelves, cutouts for stairs are made using a jigsaw (some of them can be made with a hacksaw).
When cutting out the side walls, remember that their lower edges have a slight bevel. Cutouts for the plinth are determined by location. Windows in the side walls are cut out with a jigsaw, having previously drilled holes for inserting the saw. Window openings cleaned with a file.
Not only will the accuracy and thoroughness of the manufacture of parts depend on appearance, but also the strength and stability of the entire structure.
Rice. 4. The back wall and roof are cut from 3 mm plywood. Fig. 5. Details of interfloor stairs are cut out of 8 mm plywood using simple device. Rice. 6. A device for cutting parts of the same width consists of a plywood base with a cut and a guide and a strip to be cut pressed to it: 1 - a jigsaw; 2 – strip to be cut; 3 – clamps; 4 – guide; 5 – workbench.
Photo 1. The assembled frame of the house. The parts are fitted. 2. The back wall is attached to the house and connected with self-tapping screws. and roof
Assembling a toy house
When all the parts are ready, begin assembly, starting with attaching the partitions to the shelves with self-tapping screws.
Each is screwed with three self-tapping screws, having previously drilled guide holes, taking into account the location of some partitions on top of each other.
After assembling the entire structure of the house from 3 mm plywood, the back wall is cut out in place (Fig. 4) and nailed with small shoe nails to the rear edges of the partitions and shelves, and the roof is attached.
On a note:
At the assembly stage, some difficulties may arise due to the fact that the parts are slightly different from each other, and the untreated plywood “leads” a little.
To solve the problem, you need to unscrew one of the lower partitions without disassembling the structure.
Due to this, it receives an additional degree of freedom, and the side wall can be easily screwed on. After that, the partition is adjusted in place (or a new one is made). Although its dimensions differ little from the dimensions of other partitions, the structure is already assembled without tension.
Assembly of stairs in the dollhouse
Stairs (Fig. 5) had to be made in typesetting. First, from long scraps of 8 mm plywood, I cut circular saw strips 20 mm wide, and then cut them into bowstrings and steps. A large number of I sawed identical steps with a jigsaw using a simple device (Fig. 6).
Assembled the ladder as follows. Having placed one string on the workbench, he placed two steps on it at some distance from the ends as spacers, placed a second string on top of them, and then pulled this assembly of stairs together with a clamp. After that, I took the first (top) step for the stairs and, having coated its ends with glue, placed it between the strings in the desired position and secured it with nails. Having removed the clamp and taken out the spacers, I installed the lowest step, making sure the strings were parallel. In the area of the lower step, I again put the clamp and pulled the ladder. After that, he gradually installed all the steps - from the top to the bottom. When installing, setting the step, I used an extra step without glue as a spacer, since the distance between the steps is equal to the thickness of the step itself. I constantly monitored the angle of installation of the steps so that errors would not accumulate by the end of the staircase assembly.
Balcony fence in a toy house
The balcony fencing consists of three sections of identical design (Fig. 7). To make it, slats with a cross section of 10 x 10 mm and round sticks 0 6 mm for balusters were required. Having cut pairs of slats for sections and drilled blind holes in them for balusters, each section was first assembled dry for testing.
After that, a drop of glue was applied to each hole of one rail and baluster sticks were inserted. A drop of glue was also applied to each hole of the second rail, and it was placed on sticks inserted into the first rail. Until the glue set, I leveled the structure, placed it between two flat sheets of plywood and tightened it with a clamp to eliminate possible screw distortion of the fence before the glue dried.
Advice
When making a balcony fencing, the holes in the slats must be coaxial; it is advisable to drill them with a drill fixed in a rack and a wood drill. Some larger diameter holes compared to the diameter of the balusters will allow them to fit correctly in case of misalignment of the holes. The depth of the holes should be sufficient so that the balusters do not rest against their bottom.
3.Moment of assembly of the interfloor staircase. The lower string is fixed on the workbench with a clamp.
4. Three interfloor stairs are ready for installation in the house.
5.The finished staircase is glued between the shelves ( interfloor ceilings) house. 6. Side wall house with installed lighting toggle switches. The toggle switches can be secured with glue from turning. 7. LED lighting can also be glued to the ceiling.
8. The assembled balcony railing is glued to the upper platform. 9. The house is furnished toy furniture and inhabited by inhabitants. In the dark room lighting The house looks very impressive.
Rice. 7. The balcony fence consists of three sections, which are assembled from slats with a cross-section of 10 x 10 mm and round balusters 0 x 40 mm.
DIY dollhouse lighting
Lighting is provided using 10 LEDs in the rooms and on the floors of the house. The LEDs are powered by a power adapter with an output voltage of 5 V and a maximum current of 0.5 A. The total current consumption of all LEDs is 0.35 A.
The light is turned on using toggle switches located on the right side wall of the house. From inside the house, the soldered contacts of the toggle switches are covered with a removable casing, screwed with self-tapping screws. The casing is a plywood plate 247 x 200 x 3 mm with two parts 200 x 20 x 8 mm glued to the edges.
LEDs with soldered conductors can be glued into holes drilled in the walls of rooms under the ceiling or glued directly to the ceiling. The wires are routed through the holes in back wall to the corresponding toggle switches.
I used cyanoacrylate glue to secure the LEDs and wires. Wires used in PVC insulation. I marked the ends of the wires using a tester and soldered them accordingly (Fig. 8).
Buying almost anything now is not a problem. But the beauty of making a dollhouse from plywood with your own hands is that you can also involve a child in this process. It is advisable to use plywood as the starting material - the durability of the structure, its remarkable appearance at relatively low costs are guaranteed. And cutting sheets and processing fragments will not cause any difficulties; All you need is a simple household tool.
What is a dollhouse? The banal answer that this is a spacious box in which a favorite toy and its outfits are stored is unlikely to be correct. You can make it yourself various options houses, differing in their configuration (vertical, horizontal), complexity of layout (several levels-floors, with many compartments-rooms). External design is a completely separate matter. If you turn on your imagination, you will be able to make do with what you have at hand. In addition to glue and colored paper, in any house there is always something left over after another renovation - pieces of wallpaper, film, fabric, and so on.
What plywood should I use? It has been partially said that making a dollhouse out of it is the optimal solution. It should only be noted that it is being assembled for a child’s toy. It is the strength of the structure itself and its “ecological cleanliness” that should be the main criteria to be guided by when choosing products.
One of the problems that is solved in the process of making something with your own hands is reasonable savings. Consequently, there are practically no options for which plywood to choose - inexpensive, moisture-resistant and “environmentally friendly”. These criteria are fully met. By the way, they are often confused with FSF products, since it is difficult to distinguish these plywoods externally even for a specialist.
- When choosing plywood, you need to pay attention to its markings. The safest products are those that have the letter E0 in their designation. Such sheets contain a minimum of formaldehyde, and they are the most suitable for making a dollhouse.
- The optimal plywood thickness is 5 mm. This choice combines light weight, structural strength and the convenience of strengthening it with nails.
Options for size charts
The linear parameters of the house depend on which doll it is being made for (and maybe for several) and where it will be installed. Therefore, it is more correct to familiarize yourself with the photos and drawings available, for example, on the Internet, and based on this, inspired own ideas, create your own original scheme, most suitable for local conditions.
Features of making a dollhouse
Any dad can cut plywood into fragments of certain dimensions and configurations and connect them together according to the developed diagram. There are no step by step instructions not required. But there are a number of nuances in working with FC, which House master should know.
To avoid “production” errors (and errors are inevitable even in measurements), similar parts of the house should be made according to the following scheme. First, one part, and then make sure it matches the required dimensions. And only then, using the workpiece as a template, cut out and process the rest. Otherwise, after assembly, it will turn out (more than likely) that the house will be somewhat skewed, and you will have to redo some things.
It is better to cut plywood electric jigsaw. WITH hand tools problems will arise - uneven cuts (not along the line, especially if it is figured), “tattered” ends of parts, partial peeling of the veneer in the working area.
Given the relatively small thickness of plywood, the joints practiced for solid wood blanks (saw cuts, tongue and groove) are unacceptable. Therefore, only by gluing with subsequent fixation at individual points with small nails. In terms of safety for the child’s health, it is better to use a casein composition. Such carpentry adhesives are most often used in modeling and making furniture with your own hands, and it is quite simple to buy a dry mixture and prepare the solution yourself. .
Both at the stage of assembling the dollhouse and after its manufacture, it is necessary to carefully process all the edges of the parts. Even if no defects are identified, it is worth once again walk with sandpaper. Microscopic fractions, visually and imperceptible, are potential thorns. Don't forget about the tender hands of children!
Dads should take into account that girls (like all women) have their own secrets. Therefore, drawers or boxes with doors in which you can hide something should be provided at the bottom of the dollhouse or on the side. Mini hinges are suitable for fastening the sashes (it’s easy to choose required sizes in any furniture shopping center).
If the size of the dollhouse is significant, then it is more advisable to first mount a frame from bars of a small cross-section, and then cover it with pieces of plywood.
When drawing up a diagram, it is worth considering that you plan to assemble not just a box for storing toys. Even himself small house will need some internal filling. What it will be - a mini-table, a crib - is another matter. But already at the design stage it is necessary to provide possible options and choose sizes so that the rooms are spacious enough.
Advice. When deciding how to decorate a dollhouse, do not forget that here, when choosing materials, you should take them into account component composition. Certain types of stains, oils, paints, and varnishes contain toxic substances.
If you really get excited about the idea, plan everything carefully and prepare in advance, then you can make a dollhouse with your own hands in just a few hours. Even half a day off is enough for the child to enjoy a home for his toy for a long time.
