How to make a swan from a tire. How to make a swan from tires: cut out a craft from old tires How to cut a swan from a tire

You can decorate your garden without purchasing sculptures in a store using improvised materials, as many experienced and thrifty gardeners do. Some use plastic bottles, others use old clothes and objects, and others use wheels. One of the most popular figures made from tires is the swan. It’s easy to make a swan from a tire with your own hands, you just need to know a few things important points.

The product requires a tire that has already been used; such material will be softer and more pliable. The cord on the tire is cut due to its rigidity. It is better to choose a wheel with passenger cars domestic production. Before use, wash with soapy water and dry.

You can make a swan from tires in several ways, as well as supplement them. Usually a cut-out version is used, not separating parts of the tire, but completely turning out and strengthening the bird’s neck. But many gardeners, wanting to have not only beautiful decoration, but also functional, lighter options are used, leaving most free tires for planting. It will take from one to two hours to make any of the options.

Here are some things to consider before making a tire swan:

When making products, especially if electrical appliances are used, you should follow safety precautions, and also wear gloves and goggles to prevent pieces of material from getting into your eyes.
Cut the product into outdoors, then, when using a grinder and a jigsaw there will be a lot of smoke and unpleasant odor come from the tire.
It is better to cut the cord - this inner part tires that hold the entire structure tightly. If you don't cut it off, it will be more difficult to make a bird.
The tire must be of old production, they are softer, without spikes and additional metal structures, additional metal reinforcement on the cord.
To make cutting easier, it is better to choose a tire with a tread that roughly matches the pattern, for example, in the form of rectangles.
When the neck of a bird is cut out, you can install a block under it that will help support it, and it will be more convenient to cut it off. An old tree stump can serve as a similar support. It is better to start the cutting process from the base of the neck to the nose, and then continue cutting out the neck.
After making the bird, it is better to install it on another tire or dig a shallow groove under it so that it has stability.
The paint for the animal is chosen to be resistant to weather changes. For example: for facades or enamel, automotive spray paint, forge.
If the tire had metal cord reinforcement, then the edges of the product must be processed with a grinder so that the sharp edges do not cause bodily harm (cuts) in the future.
It is better to apply the paint in 2-3 layers, after each time allowing the previous layer to dry thoroughly, then such decoration will not need to be processed for 3-4 years.

Schemes, drawings of swans made from tires:

Tools and materials

To make it you will need:

chalk or marker;
tire – per bird – 1 pc.;
paint – white or black, for the beak red or any other;
plywood for the nose, if making a bird from the second option;
jigsaw;
screw and nut, rivets, self-tapping screws - any material that will help fasten 2 parts of the tire;
Bulgarian;
pliers;
drill;
wire staples or clamps;
wire - rod;
roulette;
knife, just not a kitchen knife.

Video on how to cut a swan from a tire:

Option 1

Step-by-step instructions on how to make a swan from a car tire:

On the tire, draw the outlines of the bird with chalk (or a marker in a contrasting color).
The wheel is visually divided into 2 equal parts, one is the neck and head, the other is the body, in this proportion the bird will have a more aesthetic appearance.
The marking should occupy the entire part of the wheel so that the bird’s nose rests against the pattern of the tail.
The width of the neck is 7-10 cm, the head is 10-14 cm. The neck needs to be widened by 1-2 cm towards the body.
The tail is drawn in the form of 2 triangles or one large one and 2 small ones on the sides.
When marking the body, not only even strokes are used, but can also be done in the form of small wavy or zigzag lines.
After the prepared drawing, take a jigsaw or a sharp, thick knife (for example, such as for bear hunting).
Exactly following the drawing, start cutting out the swan from the head. To do this, you need to puncture the tire in the nose area.
You need to cut in parallel, moving gradually a few cm on one side, then on the other.
After the bird has been cut out, the tire should be turned out. It is better to do this together with an assistant, but you can do it on your own. Then you should place the inside of the bird’s neck and head on the ground and place your feet on one of the wings. Push the middle of the tire down to the ground as much as possible, using your feet to press down.
Once the middle is pressed through, the bird will acquire a certain outline of the body with wings, after which the head needs to be secured.
From the head to the tail, you need to make parallel holes with a drill so that you can attach a reinforcement rod that will support the head and neck.
Insert staples made of thick wire into the finished holes.
Prepare a rod - from wire rod, about 6 mm, bend it in a semi-arc.
Apply from tail to head and secure with staples.

When everything is secured, the head can be turned around and turned into the desired position, and then proceed to decorating.

Option 2

How to make a flowerbed swan from a wheel:

Clean the tire and apply the design; it should be applied to only one side of the tire.
From one edge we draw a heart shape, where a triangle should be left at the cut site. The drawing itself should occupy more than 3 parts of the side.
Use a knife to make a cut according to the markings.
You need to make several holes along the edge of the tire, and after cutting out the semicircle, make cuts to make it easier to turn the tire out.
When the semicircle is cut out, it needs to be turned out, and the rest of the tire.
Fold the semicircle - this will be the neck, fasten the 2 halves of which with a screw and nut.
Cut a triangle out of plywood to represent the bird’s beak and attach it to the neck using self-tapping screws.

The flowerbed is ready, all that remains is to paint and add soil so that the plants can be planted.

Any carved bird can be used to make a flower bed. For example, if you cut a swan according to the first option, it is placed on a larger tire into which soil is poured, and the bird is slightly buried in it. A small layer of earth is also poured into the lower part of the body, as if comparing the level of the embankment.

Creeping or low-growing plants are planted in such a structure; those that bloom look the most beautiful blue flowers, depicting the surface of the water: periwinkle, creeping thyme, subulate phlox, veronica, ivy. And if installed on a hill, you can use it for decoration. hanging plants: petunia, begonia, campsis, dichondra, lobelia.

Usually, when making one bird, craftsmen also make a second one, because, as you know, a swan is a paired bird, a symbol of family and fidelity. Therefore, it will be beautiful to place a whole family of birds on the site or make a sandbox for a baby.

Master class on how to make a swan out of a car tire with your own hands:

DIY tire swan diagram, step-by-step instruction and master class. The swan is a beautiful, graceful bird, but they love it not only because of such qualities. She is a real symbol of love, tenderness, inseparability, purity.

Therefore, many people often make crafts in the form of swans from paper, wood, plastic bottles, ice and many other materials. One more interesting material is a car tire.

What you will learn from this material:

Let's look at how to make a swan from a tire step by step.

1 What tools will you need?
2 Tips for choosing tires
3 Step-by-step instructions
4 Where and how to place
5 Photo gallery for ideas and inspiration

What tools will you need?

To make a beautiful and graceful swan from a tire with your own hands, you should approach the task responsibly and prepare the necessary items in advance. You will need following materials and tools:

tire without studs;
jigsaw or knife;
paint - white or any other, as well as yellow and black;
paint brushes;
metal staples;
drill or sharp nail;
elastic wire or metal rod;
pliers.

If you want to cut one swan from a tire with your own hands, then one tire is enough, if you want to make a cute couple or a whole company, then, of course, the quantity car tires must correspond to the number of “feathered” specimens.

It is best to use worn, scuffed, old passenger car tires. It is this material that is easier and more convenient to work with. It is also optimal to use domestic products.

You should not make garden decorations with your own hands from foreign-made tires, with spikes, or with a metal cord.

Before you start, you need to clean the material from dust and dirt and let it dry.

DIY tire swan step by step

A creative event requires caution and attentiveness. Before starting work, put on thick gloves and safety glasses. And follow the step-by-step instructions on how to cut a swan from a tire:

Take a tire and make a mark with chalk along which you will cut out a beautiful bird. The future type of decoration depends on this scheme. First you need to divide the wheel into two parts, mark the head and neck, they should correspond in length to half the wheel. Then outline the body, wings, tail. A photograph with a swan marking diagram will come to your aid:

Then you need to cut the swan out of the tire; for this you can use a jigsaw or a sharp knife. You need to cut according to the diagram drawn in chalk.

Advice! Don't cut out one side first and then try to do the other. The process will be very labor-intensive and inconvenient. It is recommended to cut the swan parallel, working on each side.

Cut it out? Let's start creating a realistic bird shape. To do this, lay the material with the cut part down, step on it with your foot and pull to turn out the side elements.

Now you need to fix the swan's neck from the tires, otherwise it won't hold on. This can be done according to the following scheme: make two holes along the neck for every 10-15 centimeters (using a drill or a regular nail, if you don’t have the first tool), such holes need to be made in the body of the bird, insert metal staples into the paired holes, secure wire around the neck and torso, secure it with staples using pliers.
The next step is to paint the swan from the wheel. It is necessary to choose durable paints; nitro paint, oil paint, enamel paint, car paint in aerosol form. Traditionally used White color, but you can use any other one to make a non-standard bird on your site. The tip of the head should be painted orange or yellow tint To imitate a beak, you also need to paint the eyes black or blue, and you can also paint on the feathers. To design such details, you can use acrylic paints.

Step-by-step instructions for making a swan from a tire

Where and how to place

And now the work on making the decorative bird is behind us. Surely the question arises - where is it better to place a swan so that it looks beautiful and organic? Let's look at some of the most popular and interesting options:

IN artificial reservoir. The swan is a waterfowl, so a pond is its natural habitat. And even an artificial swan made from tires will look natural in.

On a blue tire that imitates water. It is not necessary to have an artificial pond in your dacha or garden; you can make an imitation of it from a tire painted blue or light blue.

Make a flowerbed on a swan. You can place the bird in any visible area of the garden and make it into a flower bed with your favorite flowers.

Swan on a stone flowerbed. The product will look interesting on any flower bed made of stones. Read about how to make such a flowerbed in this material.

The product can be placed on a bed that imitates a pond. It can be covered with sand, stones painted blue, and decorated with plants or flowers.

Photo gallery for ideas and inspiration

Although all the designs for making the product are very similar, you can decorate your garden with an artificial bird in different ways. And all options will differ in individuality and style.

DIY tire swan photo

The photos below prove it:

Almost anyone can make an elegant garden decoration. And such decoration will cost very little. After all, old car tires can be bought at a low cost or received for free. But the work requires concentration and diligence, following the instructions and job description, but the beautiful bird will decorate your yard for many years. How to make other decorations from old ones car tires, read in this article.

Master classes on making a swan from tires with your own hands

Gardeners and car enthusiasts often have several old tires collecting dust in their garage. You are either too lazy to throw them away, or they are simply stored there with the words: “What if they come in handy.” One way to use old car tires is to make a swan out of them. There are two ways to make a swan from a tire: with or without turning the tire out.

What to use for work?

The materials we will need are:

an old tire (it is best to take a “bald” one made domestically; it is also advisable that the tire be without a metal cord, since cutting it will be much easier);
elastic iron bar or wire (for fixing the swan's neck);
several screws;
white and a little red paint;

For tools, we will need a sharp knife, perhaps a jigsaw for the densest parts of the swan. But if you have a tire with a metal cord, then without electric jigsaw not enough. You will also need a drill to attach the iron bar to the swan's neck.

Tire swan: stages of work

Another option for making a swan is to do it without turning the tire inside out, then the bird’s wings will be lowered more towards the ground.

Well, if you still have questions, watch this video:

For many Russians country cottage area- not only a place where vegetables and fruits grow, but also a relaxation area for body and soul. Decorative ponds, garden gnomes, flower beds, paths, etc. – there are a huge number of ways to decorate a vegetable garden. IN Lately Crafts made from waste, such as plastic bottles and old car tires, are gaining popularity. There are many benefits to giving a second life to old items. Step-by-step instructions for learning how to cut a beautiful swan from a tire yourself will help you make such a craft!

Firstly, it is environmentally friendly, because things will not rot in a landfill for centuries, polluting the environment.
Secondly, it’s always nice to create comfort and decorations with your own hands.
Thirdly, it is profitable; such decorations will require a minimum of financial investments, because every motorist’s tires wear out. You can come up with a lot of decorations for the garden from them: small flower beds, fences, artificial ponds and much more. Figures of animals and birds carved from tires are also gaining popularity. If you also decide to decorate your garden plot, read the master class.

How to cut a swan from a tire with step-by-step instructions

To cut a swan from a tire you need:

Worn car tire
Grinder saw
Jigsaw
Thick wire, rod or steel plate
White and red paints for exterior use
You should work outside, as the grinder heats up the rubber, and this gives off a strong burning smell
Be sure to wear thick mittens or gloves
Feet must be in closed shoes

We study safety precautions when cutting a shape from a tire

Let's get started - step-by-step instructions on how to cut a swan from an old wheel

For work you need to choose the most old tire, as thin as possible and, as they say, bald. The more worn the rubber is, the easier it will be to work with. If you have a choice, it is better to give preference to a tire with a nylon or nylon cord rather than a steel one. To do this, the tire itself should not have the “steel” marking. The latter are difficult to cut, and they are also dangerous both during work and during further use: It is better not to place such a bird on the playground to avoid cuts in children.

First, you need to draw a “pattern” of the future swan on the tire. Mark a point in the middle and from there draw a beak that smoothly turns into the head and neck of the bird. When working with an R13 tire with a circumference of 1.8 m, the dimensions are approximately as follows: beak length 8-9 cm, head 9-10 long and 7-8 cm wide. The neck at the beginning has a width of 4-5 cm and is closer to the body thickens to 8-10 cm. Its length is about 75-80 centimeters.

The swan's body should remain undivided and should not be cut: this part is where the wings and neck are connected to the head.

Swan carving diagram:

After completing the drawing of the swan from the wheel, the cutting process begins. A grinder cuts quickly, but this heats up the rubber and goes strong smell of burning and soot. Therefore, many craftsmen prefer to make notches for the jigsaw blade using the same grinder, drill or chisel, and continue cutting with it. It is convenient to use a blade with a reverse tooth at low speeds. This way the material will heat up less, there will be no soot, and control over the process is better due to the low speed of operation.

It would be correct not to cut out one side completely and then the other, but to make small cuts on both sides one after the other. It’s much more convenient to work this way, the rubber doesn’t bend as much, and the likelihood that it will turn out symmetrically increases.

Next, you need to unscrew the workpiece. It's not long, but it's quite hard physically. To do this, you need to lay the cut part to the ground, press it down with your foot and pull the resulting wings up. The result should look something like the photo.

After this, you should secure the shape of the neck. To do this, you need to make holes in it in pairs at a distance of 15 cm from each other and insert soft wire staples into them. Use them to attach a rod or steel plate to the bird's neck from above. Next, bend the part so that it resembles the neck of a swan.

After cutting and shaping the swan, all that remains is to install the figurine in the selected area and decorate it. It will be beautiful to make not just one bird, but a couple at once. Paint the body white and the beak red. Draw eyes or form them from buttons, stones, pieces of rubber.

You can also make a stand from another tire lying on its side. An artificial pond or its imitation, for example, made of stones, will look very useful.

In addition to the swan, you can make other crafts with your own hands from tires. All you need is a little imagination and time.

Video on the topic of the article

You can often see on garden plots various figures decorating the garden. They are part landscape design, make the garden more expressive, original and attract many interested glances. Perhaps the most popular and most frequently encountered figure is the swan. You can make such a figure with your own hands from old car tires. Read about the features of drainage on the site.

Swans made from car tires in the photo

To create a swan from a tire and plastic bottles you will need a little free time, patience, diligence and, of course, materials to create the figure:

An old tire, preferably well worn and without spikes, will be easier to work with;
To make one swan you will need about 40 plastic bottles;
Metal grid
A plastic hose, you can take from a vacuum cleaner, it will replace our neck;
The wire for the neck must be thick and strong enough, with the help of it the main part of the structure will be held;
A small piece of foam for the head.

The tire must be cut in one place, and the swan's tail in the form of a sharp triangle should be cut from one edge.
The edges are fastened with bolts; on the other hand, for convenience, you can cut the edges of the tire.
We attach the wire to the tire on the side where the neck will be located, one end of the wire will be the base for the neck, and the other is necessary to secure the figure of the earth, it must be left a little on the underside of the future swan. Read how to choose and how much the seeds will cost.
To make feathers:
1. It is necessary to cut feathers from plastic bottles and attach them to a metal grill.
2. The feathers are attached to the grille from the outside and slightly along the upper edge from inside, in order to finished form the mesh was not visible.
This creates two wings.
A swan's head with a beak is cut out of foam plastic and attached to a wire
The hose is also put on the wire and attached to the tire using a self-tapping screw, which it is advisable to dip in glue.

The swan model is ready, now the bird needs to be painted white. The wings can be attached to the tire on both sides using self-tapping screws, or by pulling them together with wire. Using the piece of wire left below, we stick the swan into the ground.

Step-by-step instructions - how to make a swan from a tire?

Prepare tools:

jigsaw,
electric drill,
wire cutters,
pliers,
saw for metal.

Additional materials:

a metal rod or wire a little more than a meter,
several pieces of thin wire,
chalk for marking,
paint black or white, red for the beak;
brushes

After completing all preparatory work Let's proceed to the actual creation of the swan:

The tire in its original form is marked with a head, beak and neck. The length of the neck should be more than half the circumference of the wheel, the length of the beak in length will be shorter by about a cm than the length of the head. These are approximate proportions as tire sizes may vary. Read how to set up a utility block with a shower and toilet at your dacha.
Next, use a knife or drill to make a hole so that you can insert a jigsaw and start cutting out the shape.
The sawing process should take place in a mode below average with a reverse tooth, then the rubber does not burn and the metal cord in the tire breaks.
It is necessary to cut out the pattern according to the markings evenly and sequentially, a little on each side, since if you cut out one side at once, it will be more difficult to cope with the second, it will constantly bend.
After cutting out the neck and head, you need to make a tail for the swan. Its length is approximately 25 cm from the base. Having made this length, the further process of turning the tire out will be easier.
The metal cord protruding from the cuts must be rubbed with a grinder or sandpaper so that they do not injure their hands.
Now the tire product must be turned inside out.
Along the length of the neck, in increments of 15 cm, it is necessary to drill double holes for staples, with the help of which the rod will be secured from the base of the neck to the head.
We make staples about 10 cm long from pieces of wire and insert them into the drilled holes.
Next, take a thick wire or rod and fasten it along the swan’s neck using pre-prepared staples. There should be a small piece of wire left free from the base of the neck, about 10 cm. Then we bend the swan’s neck as needed.
Next comes painting the swan in the chosen color. To do this, you can use any weather-resistant paint.
For a stable position of the swan, it is necessary to place stones at the base or substitute another tire. You can also organize a flower bed at the base of the swan.

How to color a tire swan?

You can use additional decorative elements, for example, a crown, which you can build yourself from plastic bottle, the base of which will be the neck. Paint the crown gold, secure the base to the head of the figure - and then the magical bird Princess, the swan, will settle in your garden. If the base for the figure is another tire, it can be painted in a contrasting color, for example blue, as if a swan is swimming on water, or green. If you don’t want to be like most gardeners who have white swans in their garden, then the swan can be painted black, it will look very impressive.

When several swan figures are made in the garden, black and white swans together will look very original.

In this case, everything depends on the person’s personal preferences and his imagination.