Crafts from tires and tires. How to make a swan from a car tire to decorate your garden

Options for recycling car tires that have served their purpose for suburban area weight - from old tires you can make garden decor, beautiful, comfortable furniture, add a playground, or build a new reservoir for landscape design. In general, instead of the cost of disposing of unnecessary and harmful environment material, you also get useful .

From old tires with your own hands

By making from old tires with their own hands various garden decor and figures today you will not surprise anyone. Maybe that's why the fashion for or a flowerpot has almost completely passed. Smartly, such products look literally one season, and then they still have to be disposed of, despite the fact that the efforts expended will be in vain. We would like to offer you more ideas. modern use used tires, moreover, in today's selection you can find examples of recycling both large and medium-sized tires.

The most common idea today is do-it-yourself, which is aimed at making durable and practical garden furniture. We will show you some ideas and one simple tutorial that will prove the right way to dispose of waste material in this way.

Such furniture has become so popular now that you can throw away old tires for alteration, and for little money they will be able to help you in their transformation. Although, as you can see for yourself, the simplicity of such a transformation of tires will allow you to cope on your own with a minimum set of tools.

The advantages of such are obvious - rubber-based furniture is not afraid of rain, sun, it is not of particular value, which means that it can be safely left on the street without wasting time carrying it into the house.

Plus, such a furniture set can be made modular, if necessary, make as many poufs as needed so that it can be taken at the same time a large number of guests, and after the end of the holiday, put them on top of each other, and they will not take up much space.

In addition, inside the tires of a large radius there is a fairly strong reinforcement, which allows future furniture to withstand quite a serious weight, and this good advantage for people with a lot of weight, for whom not all garden chairs are suitable.

You don't necessarily need a cutter to get the job done. Firstly, the metal cord that is inside is not so easy to cut, plus there are sharp edges that can hurt you during operation.

Well, and secondly, the shape of the tire itself is already ideal for a pouffe, armchair or, say,. Above you can just see a master class on decorating a wheel so that it turns into a fashionable pouf. Jute rope is used for finishing, but you can use both hemp and twine, in a word, whatever seems appropriate to you.

First of all, you need to attach two plywood circles that will make the future table more functional. It is clear that the upper circle is the tabletop on which the dishes will be displayed, but the lower circle is needed both to distribute the load and to mount small legs or rollers on which the table will rest.

We fasten the plywood circles with a screwdriver, then we arm ourselves glue gun and make the first point in the middle of the upper circle. We attach the end of the rope to this drop of glue, then we move in a spiral, from time to time applying glue under the material, but making sure that there is not too much of it.

We bring the dense layer to the largest circle and fix it. Next, we process the side of the wheel in the same way until the rope completely covers the rubber surface.

After viewing the photo with examples of beautiful garden furniture, you will probably no longer have a question, where to donate old tires and another one will appear - where to get the missing ones in order to make the most complete and complete garden set.

What to do with old tires

The second area of application what to do with old tires- This is the arrangement of the playground. All kids need a place in the country where they can throw out all their ebullient energy and tires become a good help for parents. Judge for yourself - putting the wheel on the ground and filling it with sand, we get a ready-made comfortable sandbox with comfortable sides for sitting, and if you dig a few small tires vertically into the ground, you will get a good sports equipment for running and jumping. In general, this section will be devoted to these varieties.

The swing is a worldwide hit among. The only limitation is that the support for such a swing must be appropriate, very strong, since the tire itself has a lot of weight, not to mention the child who will sit on it.

Therefore, if there are no such old and powerful trees on your site, then it is better to abandon this idea. Try to find suitable tree outside the site and build a swing on it.

But besides the swing, there is where to adapt small tires. For example, they can form walls for a gaming sports complex, it will be quite easy to climb up them. You can attach them to each other and to the base using long self-tapping screws, just do not forget, for safety reasons, to check that all sharp ends are inside or bent.

In addition to sports equipment, there are also many ideas garden figures, such as ships, cars, and other things that children love so much. This variety can be combined with and boards, as a result, you will get a favorite place for kids to play for several years to come, you will only need to periodically renew the paint on it at the beginning of the summer season.

What can be done from old tires

Thinking further what can be done with old tires we can come up with the most unexpected solutions. For example, below you can see images of unusual lamps, the main materials for which are tires. Such a brutal decoration will look good in a garage or a country workshop, in a primordially masculine territory.

In the first version, the lamp is assembled by analogy with the tavern lamp of the Middle Ages - only then candles were attached to the wheel rim. For us, it will be enough to electrical wire, fix the light bulb in the cartridge and additionally decorate the rubber circle itself. At the same time, decorations can be both similar in style, and completely unexpected, such as glass crystals from crystal lamps.

The second variant of such an idea is to place the light bulb directly inside the protector, and in order for the light to be scattered through, make many holes in the surface. Such perforation can be simply chaotic, or it can develop into whimsical patterns, which will be clearly visible in the dark, with the lights on.

The photo shows that this idea works great both with solid tires and with halved or even three sectors, only in the second case you can save the number of materials used.

Well, the fourth photo shows an example of a rack based on a protector, moreover, it can either be hung in a garage for storing tools or become an excellent decoration for a child's room, because for a boy such a decorative element will be just a great gift and addition to the interior.

Old tires in the country

Traditionally old tires in the country- this is a decoration for flower beds or even the very basis of these same flower beds. In fact, the scope of their application can be much wider, and the ideas more diverse. To begin with, with their help, flower beds can become not horizontal, but vertical.

It is the embodiment of the principle vertical gardening is the main advantage flower beds from old tires. After all, plants can be planted on a fence, on trees, while saving a lot of space. In addition, by exposing the material on top of each other, you can get not only a high flower bed, but also high bed for growing garden plants.

In addition, in the photo you can see an example of creating a system for storing garden hoses inside a container that was a tire. To create it, you can use the flowerpot master classes, the principle of their cutting is absolutely identical. Inside such a basket, the hose will be conveniently stored and unwound if necessary.

For registration, be sure to use not only multi-colored paint, but also additional invoices, for example, thin plywood, boards, fabric, ropes, all this will help you turn new landscape units into your real pride.

Crafts from old tires

Separately, it is worth considering such varieties crafts from old tires like water bodies. At any site, there is a need for a reservoir with water, but sometimes you want to do more than just make a useful container for watering plants warm water, but also decorate the territory with a small pond, a fountain at no extra cost. In this task, tires will help us, or rather one of a large radius.

In the photo you can see the main stages of turning it into a pond. You need to dig a hole in the ground large enough to fit the tire completely, lay it down and completely cover it with a waterproofing film that does not allow water to pass through.

Flagstone or stone must be laid on all sides in such a way as to decorate the walls so that the rubber surface wrapped in film is completely hidden under them.

If your task is a pond, then you can throw the hose separately and fill the container with water, but if you want to build a fountain, then it is best to put the hose and motor before you close the perimeter with facing stone.

Above in the illustrations you can see ready-made examples embodiments of reservoirs, the basis for which were old tires. The idea with the design of the gabion around the tire, a metal mesh filled with stones, looks very interesting. This creates a very visually interesting landscape object that can be complemented with flowerpots by placing them directly on the grid on top or even making a wooden podium to lie near the water.

Decorating a summer cottage is not limited to bright drawings, flower beds and purchased sculptures. Small parts in general perception, gardens are no less important. Many of them can be made by hand, and tips for creating crafts from old tires will help you with this.

Sculptures from old tires

With the right color of tires in your garden, you can make many bright animals from all over the world. It is enough to prepare a few tires, allocate a little time and apply your imagination.

How to make a swan

Increasingly, swans can be seen not on ponds and other bodies of water, but in gardens and household plots. Our yards have been chosen by whole flocks of these beautiful birds made from waste tires. If you are also an admirer of such crafts, but do not know how to build them, then check out detailed master class to create swans from tires.

In order for similar swans to appear on your site, some materials and tools will not be enough, you will have to work hard.

Prepare some old tires, a jigsaw, an electric drill, a well-sharpened knife, metal rods, chalk for marking, and paints of different colors.

For work, choose worn tires from cars. They should be worn out, because the thinner they are, the easier it will be for you to work. Immediately discard and do not take into account the tires with spikes from foreign manufacturers. If you have the opportunity to choose, then give preference to tires with a nylon cord, they can be easily cut with an ordinary, well-sharpened knife. If you use tires with a metal cord, you cannot do without certain tools. Before starting work, the rubber must be washed and dried. And the work itself is best done outdoors.

The general view of the swan directly depends on the scheme by which you will mark the tire. First you need to chalk the markings on the tire, the diagram is shown below in the illustration. Define the head, tail and wings.

To make it more clear to you, we bring to your attention an additional photo that will explain the whole process of working on cutting a swan.

When marking the bird, keep in mind that the length of the neck together with the head should be more than half the circumference of the tire. Suppose if you use a wheelR13, then its circumference is 180 cm, then 95 cm will go to the neck, so that the head is proportional, its length should be 10 cm, and the beak - 9 cm.

After the markings are drawn, proceed to cutting the tire. If you have chosen an old tire with a nylon cord, then a knife will be enough for you. To facilitate the work, prepare a soapy solution and periodically dip the knife into it.

First of all, cut the tire along the contours of the head and neck. The biggest mistake that almost all beginners make is that, when sawing out the neck, the tire is cut completely first along one line of the neck. In this case, the second side will be extremely difficult to cut. Make not very large cuts on one side or the other.

The next step is to work with the tail. Its length is 25 cm. It is a decorative element, its manufacture will provide easier eversion of the tire. It is cut in the same way as the neck.

Now you have the laborious work of turning the tire inside out. This is done in this way: turn the tire with the cut side down, press it down with your foot and pull the side parts up, while turning them out. Push down the center piece.

Now general design began to resemble a bird. Next, lower down the side rings, which will serve as the wings of a swan. If you have chosen a tire with a steel cord, then in addition to additional difficulties in working with it, you will receive a product with protruding reinforcement. In any case, the edges need to be processed with a grinder. Please note that such a swan can only be used to decorate the garden, it is strictly forbidden to install them on playgrounds, anyone can get hurt.

After that, the bird must be given correct form. To do this, drill 2 holes every 15-20 cm of the neck length. You need to insert staples of thin wire into them and stretch another piece of wire along the entire length, which must be steel and strong. You will need it at least 1.5 m. The upper end must be fixed at the level of the head, the lower end at the base of the neck.

In general, the swan is ready. It remains to give the bird's neck a proper look and make rubber eyes that are screwed on with screws. To decorate the wings, you can make a shape in the form of teeth, so they will look like plumage. If you want, you can additionally make a crown from a plastic bottle. Paint your sculpture. Most often, white or black colors are chosen for swans. But remember, in order for the paint to last longer, it must be applied to a clean and dry surface.

How to make a snail from a tire

As in the previous version, it is best to choose an old worn tire without a metal cord. It lends itself perfectly to cutting with an ordinary well-sharpened knife. If you have a jigsaw, then the work will be done much faster. Additionally, prepare a screwdriver, screws, a couple of metal rods, as well as gasoline with emulsion paint.

The washed tire first needs to be cut in such a way that one continuous strip is obtained from it - you must cut off the side parts.

Now, using the chalk and the photo as reference, you will sketch out the head and horns of the snail. According to this scheme, you will need to cut out the future sculpture. Next, thoroughly clean the rubber again, wash it and degrease it.

Twist the finished rubber band as shown in the illustration. You should get a kind of shell. Fasten it using screws with a screwdriver.

To ensure that the head of the snail is always in an upright position, with reverse side you need to insert metal rods.

The sculpture remains to be painted in the most suitable color and shape her muzzle. Install the snail in a pre-prepared place so that it can become a real decoration of your garden.

Vases made from tires

Currently, there are many opportunities for acquiring summer cottages. decorative elements in the store, and the flowerpot is no exception. However, it is much more pleasant and cheaper to make it with your own hands. In this case, absolutely any materials can be used. But today we will talk about how to make a flowerpot from old tire. It looks no worse than those made of plastic, wood or plaster.

In addition to the tire itself, you will need cement, sand and a primer, crushed stone (pebbles) of not very large size, plaster mesh (wire), soapy water, and paint. Prepare a jigsaw, a grinder, a hard brush, a well-sharpened knife, a brush, a bucket and a trowel from the tools.

First, cut off the sides of the tire. Draw a curly border with chalk and cut the tire along this line. To facilitate this process, periodically dip the knife in a soapy solution, it will become much easier to cut rubber. If you want to make a more intricate pattern, then use an electric jigsaw.

Now the tire needs to be turned inside out. It will take quite a lot of effort and time. After that, proceed to grinding the edging of the flowerpot. For this you will need Grinder, so you give the product a more aesthetic look.

It remains to decorate the flowerpot. Apply a primer to the flowerpot and leg, and then you can paint the product. Choose lighter colors, because. they don't fade as much as the dark ones.

On this, the work on creating a flowerpot can be completed. However, if you want to give it a more original and attractive look, you can decorate the leg using pebbles and concrete.

Wrap the leg with wire. This is necessary so that the concrete is fixed on the flowerpot more reliably, the wire can be replaced with a special mesh used for plastering. Make a mortar of cement, water and sand (1:0.5:3). To better fix to the rubber, it should come out thick enough. Apply the solution with a trowel on the leg, throwing it. At this point, remove the flowerpot to the side, so it does not get smeared. Immediately start decorating the leg with pebbles (pebbles, broken glass, etc.). After adhesion has occurred, wash the stones by brushing off excess solution. So that the leg does not crack, it must be watered for the first 3 days.

The country flowerpot is ready, it remains to fill it with black soil and plant the seeds.

Tire swing

Well, what childhood can be imagined without swings. In the park and in the yard - this is an essential attribute for a bright and fun pastime. A small play corner for your child can be built at home on personal plot. To do this, you do not need a lot of money.

You can always find close to home appropriate place in order to position the swing. There are a lot of options for their manufacture. However, the most budgetary and easiest way is to build a swing from a tire, especially in this case the use of materials will be minimal. The main thing is that there is a desire, and the number of variations is large enough, so you can always find the most suitable for yourself.

The safest for children are swings made of tires. With a possible impact, the strength of a rubber seat will be less than that of one made of wood or metal.

Making an outdoor swing is not so difficult, even if you do not have any specific skills. Sufficient will be the ability to deal with welding machine or with a hammer - it all depends on whether the swing will be metal or wooden.

In any case, two poles are installed (decide for yourself whether they will be made of wood or metal), where one aspect is important - the bars must be large enough in diameter, because. they will have to withstand significant loads. A crossbar cuts into the upper part. It is necessary to screw bolts with rings into it, on which the rope will be hung, its ends will be fixed on the tire.

A tire seat can be made in two ways. In the first case, one solid tire is used (holes for the rope are made on the sides), in the second case, cutting parts of two tires are used. If everything is clear in the first case, then the second option should be discussed in more detail.

Here you need to cut off the upper and lower parts, only the side ring is useful in the work. The other tire is processed in a similar way and folded in half - it must be placed across the first, covering the free area inside the first tire. From 2 tires you should get a cross. In this case, the tires are fixed to each other, use a bolt, a double washer and a nut. Just pre-drill holes for future fasteners. You can attach a tire seat with ropes or chains. Think about mounting holes in advance.

If you have a suitable tree for making a swing growing on your site, then consider a few points. The minimum allowable diameter of a branch is 15 cm, its height must be within 1.8 - 3 m from the ground. If we talk about the strength of the rope, use a rope in your work, it will only be attached to the tire.

Furniture from old tires

Quite a lot of old tires are thrown away every year, although they can be a very good material for making many useful items. And furniture made from old tires is a perfect example.

Making an armchair

To make a chair, you will need car tires. Additionally, prepare a stapler for furniture, self-tapping screws, a screwdriver, and foam rubber.

First of all, prepare the tires for work by thoroughly washing and cleaning them of dirt. To make them last as long as possible, you can cover them with a special solution that will make the surface of the tire smooth to the touch or, conversely, velvety.

To complete the chair, proceed in accordance with the images presented in this article. most main job is the connection of tires with each other. For this, it is best to use self-tapping screws and a screwdriver. Two tires are placed one on one, and then the back is additionally made.

As for the seat, you can fix the chipboard on top, place foam rubber on it, felt is attached on top of it with a furniture stapler.

In general, it should be noted that the field for fantasy is quite large, you only need desire and perseverance.

Ottoman

How beautiful and unusual a set of furniture made from old tires can become. You won’t ride them anymore, but you will have a rest with pleasure.

This comfort can be easily provided by an old tire, a screwdriver, foam rubber for furniture and flexible plywood.

Clean and wash the tire first. After that, it must be covered with burlap or felt. For these purposes, it is best to use construction stapler. To prevent the future pouf from deforming, several wooden blocks must be inserted inside for support. Screw a wooden circle on top with a screwdriver. Next, decorate the seat with foam rubber. You can make several circles for more comfort. Now the finished frame needs to be covered with fabric.

Using old tires, the summer cottage can be decorated with anything. In addition to furniture, animals and flowerpots, you can make a pool, all kinds of baskets, flower pots and much more.

Now you know how many crafts are made. With a little practice, you will master the technique of making various items from tires and will be able to create the brightest and most unusual items from old tires for your garden.

Decorating your garden with the help of improvised means is not only easy, but also pleasant. After all, such an activity can unite the whole family, and everyone will find something to their liking and on the shoulder. Today we will tell you how to make a swan out of a tire with your own hands, and consider several forms of these figures and how to use them in the garden and in the flower bed.

Materials, tools, basic concepts

You have probably seen these figures in the form of swans near private houses in the countryside or in summer cottages. And, perhaps, they wanted to do something similar near their home. So why not, if you have a couple of old, obsolete tires lying around in your shed? Even if they don't exist, you can find a few at any auto repair shop.

I will not say that a tire swan is a very simple task. Rubber is quite hard and resilient, so you have to make some effort, as well as be careful and accurate. But the lesson will not take you much time, only about an hour for one swan. And you will see that it was worth it!

So, what we need in work:

old car tire;
Bulgarian;
jigsaw;
wire for fixing the shape;
paint, white or black - for the swan, red - for the beak.

Old tires are great stuff to get creative with.

In some cases we will use Additional materials and tools. But we will focus on them in the course of the description.

Please note: try to immediately decide what you will cut the tire with - a grinder or a jigsaw. Using a grinder, you will get the job done faster, but the fumes and the smell of burnt rubber can be very harmful.

Where can these swans be used? You can place the figurine anywhere in your garden. The swan will serve as just a toy and decoration, it can be used as a flower bed and even the basis for a small country fountain.

Now let's take a look at a few options.

small flower bed

This is perhaps the simplest option, and at the same time functional. In order to make a swan flower bed, use a simple scheme, having previously applied it to the tire.

Scheme of a flower bed-swan from a tire

Cut the head and neck along the black lines with a jigsaw. The red lines in the diagram indicate the tail, the blue lines indicate the plumage of the wings. Make cuts on them.
Now it's the turn of the most difficult part: you need to turn the tire inside out. Do this carefully, and turn it out carefully so that the tire does not get damaged.
The main work is done, there are little things left. Make a beak (from plastic, plywood, a piece of another tire) and paint it red.
Place the two halves of the head together. To do this, you need to bend a hard cord, insert a beak and secure the entire structure with self-tapping screws. They also need to be screwed into place for the eyes.
Raise your head, push it slightly into the wheel. Fix the formed fold in several places with self-tapping screws. Tighten as tight as possible to keep the head in place.
It remains only to paint your design in white or black, depending on your imagination and desire. The screws in place of the eyes can be painted over with black paint, or better, sealed with circles of electrical tape.

Here is such a flower bed in the form of a swan can be obtained from a tire

Now set up your mini-bed in the planned place, fill it to the top with prepared soil and plant flowers inside. It can be pansies, marigolds, matiola, begonias or any other low plants.

Figurine-decoration

This swan is only an aesthetic value. Making it is no more difficult than the previous one, but you have to work a little on the shape of the bends. But such a figurine will decorate the site no worse than an antique statue!

When choosing a tire for a swan, pay attention that it does not have a metal cord - it will be much easier to cut. In order to subsequently fix the neck, take an aluminum wire or an elastic iron bar. Arm yourself with a sharp knife and a jigsaw for cutting very dense areas. To fix the iron bar on the tire, you will need a drill.

Scheme of execution of a garden swan

Please note: for processing, it is better to take “bald” tires of domestic production. They are softer and more amenable to cutting.

Divide the tire into two equal parts with chalk. On one side will be the beginning of the tail and head, and on the other, the base of the neck. Outline the silhouette of the head and the lines of the wings.
Cut the tire along the marked lines. If you are using a knife, dip it in soapy water, it will make the process easier.
Now you need to turn the tire inside out. You will need an assistant to do this, but you can do it yourself by stepping on the outer rim of the tire. The frame of the future swan is almost ready.
Fasten the neck: drill paired holes in the tire and attach the neck with thin wire to the iron bar from the outside. After you paint the swan, the fasteners will be almost invisible.

Paint the body of the swan white and the beak red.

The flexible iron plate will help give the neck desired shape bending. The plate should be slightly longer and narrower than the neck itself. Make holes in it with a drill and secure, giving the desired shape.

You can make another version of the swan according to this pattern. Just don't turn the tire inside out, that way the shape will be a little different and the wings will drop more towards the ground.

Now you know how to decorate your yard with beautiful homemade swans. And you can make them from an old, failed tire. Perhaps you know a few more schemes and methods. Please share your experience with us in the comments. Good luck!

Turning things that have served their purpose into various pieces of furniture and decor has long become the norm. On old tires, pallets and plastic bottles many people no longer look at garbage, but only as construction material. Perhaps, after reading our article, you will also join them, because today we will talk about what amazing crafts from tires you can do it yourself.

How to make crafts from tires with your own hands.

Let's start with not just beautiful, but with beautiful and useful. You can make a lot of functional things for a garden plot from used tires.

How to make garden furniture from tires with your own hands master class.

Old tires need to be washed and cleaned. You can use for cleaning special means for cleaning tires - then your tire will take on a shiny black look.

We paint the side surfaces of the tire acrylic paints. For more interesting view garden furniture, we can paste over the side surfaces of the tires with leatherette and paint it.

To get rid of the black gloomy color, first we paint our entire workpiece with white. Then we apply our drawing with colored paints. And, finally, we add clear dark contours to the drawing.

For the middle of our ottoman we make a round pillow. In order to apply color painting on black leatherette - fill the place under the drawing with white paint, and then apply a color pattern on top of it.

How to make an ottoman with a knitted cover from an old tire master class.

If for garden furniture made of tires, its resistance to weather conditions was important to us, then for a gazebo or terrace we can make another beautiful option ottoman from tires.

We attach the legs to the tire cleaned from pollution.

We knit side surface for our puff. If you don’t know how or don’t want to knit, then for these purposes you can use parts of an old sweater.

We fix the knitted fabric on the tire on the side and bottom. We close the upper hole in the tire with a circle of plywood.

We crochet a round knitted part for the top of the ottoman with a side part.

Interesting options for crafts from tires.

There are other simple options tire garden furniture. We can stack the tires on top of each other and make seats and armrests out of scraps from the top of the tire.

Or another version of tire furniture. Wooden spacers are inserted inside the half of the tire and a soft roll is sewn in - so you're done comfortable seat for the chair.

Crafts from tires for children.

From tires it is easy to make devices for playgrounds. For example, here are such simple swings.

Or a car that will not leave any kid indifferent.

Flower beds from tires with their own hands.

Very often, old tires are used to create flower beds and street flower pots. So to speak, cheap and cheerful. The flower bed can be given more decorative look, making its edges more interesting.

To make such a flower bed, you should mark the side of the tire as shown in the photo. And then just cut along the line.

The cutting process itself can be tricky. Ideally, this is best done with a jigsaw. If you cut with a knife, then lifting the cut with a wooden peg, you will greatly facilitate your work.

The cut tire must be turned out. It's easier to do it together. But you can turn out the tire and one, stepping on the edge of the tire with your foot, and turning the other edge with your hands.

Such flower beds can be varied and original - this is what helped them gain great popularity. The most famous option is to put the tire on a stand that we cut earlier from its top.

You can decorate a summer cottage or just a courtyard near the house with ordinary old wheels, and many craftsmen make real masterpieces with their own hands! Indeed, in our country, the recycling of used tires is not on highest level, and we can see a lot of tires thrown right into the street. But you can also combine business with pleasure and create crafts - decorations for a summer cottage, garden, orchard with your own hands. Let's see a selection of photo crafts from a tire:

Using tires in the garden

With the help of paint and imagination, you can create your own and real work of art. There can be a lot of options for the execution of flower girls, we will consider the master classes themselves in the following articles, and now let's look at the southern exotic - a palm tree:

Do-it-yourself palm tree from tires

Crafts on the theme of southern holidays are very popular with us, we have already published an article that described in detail its manufacture. Except exotic plants you can also create African predators:

Tire crocodiles

Decorate your garden with tire crocodiles

Such animals can not only arouse admiration, but also scare away unwanted guests ... They are really made very beautifully and believably.

Elephant from an old tire and a camera in the garden

A colorful blue elephant, all from the same southern African countries, will look very good on the playground. Here are a couple more examples of these wonderful inhabitants of Africa:

Having made the correct coloring of the tire, you can create your own zoo from a variety of animals from around the world. And for this you need only: desire, a few tires and a little imagination. Here, at someone's house, a tire was turned into snails and a black and white zebra:

Snails and Zebra: tire crafts for the garden

To decorate the garden, you can come up with bizarre birds, for example, a parrot can be a good home for flowers:

Parrot and swans: homemade from an old tire

For bird lovers, you can make these funny crafts:

Birds - crafts from tires for a country garden

The pet birds turned out very wonderful, they don’t even look so impressive!

Tire Turtles

"Auto" turtle from used car tires

Turtles from car tire

How about a good cup of tea?? You can also make a “tea set” to decorate a flower garden, it will be difficult to pick up such a cup, but it looks great!

Patio Tire Crafts

For a full-fledged tea set for these cups, you need a good garden furniture, here are just suitable samples from the tire:

Old tire as furniture

The furniture turned out to be really original, though it cannot bear the weight of a person by itself, so the frame must be made of a metal structure.

Playground decorations using a tire

Fabulous animals can decorate both their playground and the territory near the house. Few people can walk past them without a smile, and children will be most interested in such figures.

funny horses