The crane for a toilet bowl with the built-in bidet is wall-mounted. Basin faucet with hygienic shower. Toilets with bidet function

Washbasin faucets with hygienic showers are installed in small bathrooms, where free space does not allow the installation of a separate bidet. In terms of their functionality and comfort of use, they are no different from the usual bidet, and at a cost several times lower. Another plus is that the faucet can be installed on an existing sink, which further reduces the estimated cost of work and reduces installation time. All equipment can be installed within a few hours.

A wide range of different models allows all users to choose best option both in terms of price and quality, convenience and ease of use.

Below is a table of the most famous companies engaged in the production of such equipment. Each company has a large selection of products, the differences between them can be very significant.

Washbasin faucet with hygienic shower

If it is difficult to make the final choice on your own, then it is better to use the universal advice of professional plumbing installers.

Features of use

It is necessary to install a sink mixer with a hygienic shower in the reach zone, so you can ensure the comfort of use. The distance from the shower head bracket to the toilet bowl should be chosen in such a way that it can be easily reached by hand, and the length of the flexible hose ensures hygiene procedures. Consider these requirements when choosing specific model equipment. If the distance from the sink to the toilet is large, then the length of the hose must also be appropriate.

You need to know the nuances of use, they will have a positive impact on the choice of a specific device model. Before hygiene procedures, you need to adjust the water temperature.

After selecting the temperature, you can use hygienic watering can. But it should be borne in mind that turning on the watering can at the same time leads to a drop in water pressure, adjust the pressure force taking into account this factor.

One more thing. If, during hygiene procedures, water is also poured out through the mixer, this increases its loss.

As soon as the faucet in the sink is turned on, water under pressure enters the flexible hose. Such a triggering scheme increases the requirements for the reliability of a hygienic shower, pay attention to its condition and, if leaks are detected, immediately eliminate them.

How the watering can of a hygienic shower is arranged and how to repair it, we will describe in this article below.

Criteria for choosing basin mixers with hygienic shower

We will not touch on specific brands and brands, decide on them yourself, taking into account design and cost. And on technical features worth going into more detail.

Manufacturing material and protective coating technology

Most often, the faucet body is made of brass, hardware and additional elements are made of silumin. Outer plating in chrome or nickel. How do these materials and technologies differ?

1. Chrome plating. The highest quality and wear-resistant coating, hence the high price of such products. During the manufacture of mixers, the technology of electrolytic chromium plating is used, up to three layers of various thicknesses can be applied. Chromium is resistant to most acids and due to its high degree of penetration into the base it provides a very stable coating. The details are perfectly even and shiny. Chrome does not tarnish when heated to +110°C, which guarantees color stability for the entire period of operation. Surfaces can be cleaned of contaminants with any modern detergents no limits.
2. Nickel plating. A cheaper method of coating external metal surfaces mixers. In all performance indicators, it is significantly inferior to chrome plating. The method is used during the manufacture of cheap or counterfeit products.

Practical advice. The cost of the final decorative coating in the total price of a faucet with a hygienic shower is only 3-5%, you should not save on its quality. Chrome-plated products retain their original appearance much longer, coatings long time do not exfoliate, do not change color, do not appear on them stains. Do not skimp on the outer coating, it is much more profitable to use faucets with chrome surfaces.

There are mixers with a body made of silumin - you should not buy such models. They do not last long, often suddenly crack. And the consequences of leaks can be the saddest, fixing problems will cost much more than purchasing a quality faucet.

Dimensions

The linear parameters of the device must take into account not only the size of the bathroom, but also the spatial position of the sink and toilet. It is highly desirable that the bracket for fixing the hygienic shower head is located under right hand. This arrangement eliminates many inconveniences during the hygiene procedure.

Pay attention to the length of the flexible hose, let it be with a margin. If you plan to mount the faucet on the sink, then it must have a special technological hole. If not, then it is better to purchase wall-mounted devices.

Practical advice. If there is already an ordinary faucet on the sink, then replacing it with a new one with a hygienic shower will not be a problem. Manufacturers unify all holes and diameters, it will only be necessary to dismantle the old device and install a new one in its place. No complex modifications are required.

Installation and assembly instructions

Let's consider an example of installing a faucet with a hygienic watering can directly on the sink.

GROHE single-lever basin mixer

Step 1. Check the completeness of the delivery according to the instructions supplied by the manufacturer. Figure out where which rubber gaskets should be installed, which elements are intended for installation, etc. Each manufacturer should give circuit diagram assembly, begin installation only after studying it.

Step 2 Place the round rubber gasket on the bottom of the faucet. In terms of size, this is the largest gasket. Check its integrity, if there are leaks, then water will begin to flow under the sink, this is a very unpleasant phenomenon.

Step 3 Insert the mixer into place, put a metal element on it from below for fastening. Check the position of the device, the rubber gasket should completely cover the technological opening.

Step 4 Tighten the fixing nut. Do not apply too much force, the ceramic sink may crack.

Practical recommendation. Tighten the nut until the rubber gasket around the entire circumference is slightly compressed. Turn the mixer in different directions, it must be held firmly. Do not compress the rubber to the limit, it is very dangerous.

Step 5 Attach flexible hoses to the mixer. There are three of them: two for cold and hot water for mixing and one at the outlet to the flexible hose of a hygienic shower. All hoses have o-rings, do not overtighten them. Modern models do not require much effort to assemble, these old sealing devices used tow, it had to be tightened strongly.

Mixer hoses connected to taps

Step 6 Mount the watering can holder on the wall. The distance from it should allow you to remove the watering can without getting up from the toilet.

Step 7 Attach a watering can to the second end of the corrugated hose.

Step 8 Turn on the water supply and check the tightness of the connections under pressure. Checking is easier to do with pieces of paper. Lay it on the floor under the joints and wait 5-10 minutes. During this time, leaks will definitely appear. Drops of water on paper are clearly visible, determine which connection is leaking and fix the problem.

Important. Malfunctions are not eliminated by strong tightening; this is not only useless, but also dangerous. The fact is that the hardware is made of fragile materials and will fail with strong efforts.

To eliminate the leak, you need to unwind the assembly and check the condition of the rubber gasket or gland. main reason leaks - damage to the rubber elements during assembly. If necessary, replace the gaskets with new ones, you can buy them at any plumbing store.

How to repair a watering can

Mixers may have various devices to adjust the water temperature, all users know about the features of their work. But not all users know how a watering can for a hygienic shower works and what problems may arise during use. We have already mentioned that shower head leaks can cause flooding in the bathroom, the consequences of flooding are very unpleasant. Before you repair a watering can, you should study the principle of operation and learn about the components.

From what elements is a hygienic shower head assembled?

1. Frame. It is made of plastic, external surfaces have a decorative covering. A watering can of small diameter is screwed to the body with a screw, control mechanisms are placed inside. A corrugated hose is attached from below, on the back there is an external lever for turning on the water supply.
2. Metal tube. Made of brass, it is used to supply water from a corrugated hose to the body of the watering can and then to the shower. One end of the tube is tightly pressed against the rubber gasket, the other one moves freely in rubber glands installed in the housing plug. The metal tube, when the lever is pressed, compresses the spring, the tube descends along the glands and opens the water to the watering can. Two plastic stops are pressed onto the tube to stop the lever.
3. Spring. Made of stainless alloy steel, presses the metal tube against the rubber valve. The spring rests at one end against the plastic limiter on the tube, and at the other end against the plug on the body.
4. The lever (button) of inclusion of water. The upper part rests against the drive on the housing, the lower part reciprocates the tube. It is fixed to the body with a metal axis.
5. Stub. It has a hole in which the tube moves, rubber rings are used for sealing.

Manufacturers can slightly change the size, location and materials for the manufacture of elements, but the principle of operation is the same for everyone.

How to repair a hygienic watering can

We have already mentioned that the watering can is the most important element of a hygienic shower; when the mixer is opened, it is always under pressure, has rubbing surfaces and rubber valves. Each of these elements can cause leaks. Problems appear in three places.

1. Water leaks in the lower part of the body of the watering can. The reason is the loose connection of the corrugated hose with the body of the watering can. This is the simplest malfunction; to eliminate it, it is enough to replace the rubber gasket or tighten the nut a little.
2. Water drips from under the water supply control lever (button). The reason is the critical wear of the rubber rings in the plug. The seals must be replaced.
3. Water seeps through the holes in the watering can. The reason is that the tightness of the water supply shut-off is broken. In the closed position, the metal tube is pressed against the rubber gasket by a spring, natural physical wear appears on it over time, it loses its plasticity, and dents may form. If, in addition to these problems, the technological holes in the body, into which the tube is inserted, have increased, then during the movement it deviates slightly from the axis of symmetry each time. This is the most annoying problem, sometimes you have to buy a new hygienic shower head.

To fix the last two problems, you need to completely disassemble the watering can. How it's done?

Step 1. Unscrew the corrugated watering can hose.

Step 2 Use a knife or small screwdriver to carefully pry the plug from the end of the case. Take it out slowly, pry it from all sides and gradually pull it out. Do not damage the body of the watering can, the plug is very tight. Work carefully, as soon as the element begins to move, lower the case as low as possible to the desktop surface. Keep in mind that the spring inside is highly compressed and can fly out at high speed. Take every precaution.

Step 3 Remove the metal axle from the housing, it holds the control lever. In the absence of a spring, the axle should be easy to remove. You can remove the axle with an awl or hard wire of a suitable diameter.

Step 4 Take out the lever.

Step 5 Now you can remove the metal tube and the rubber band that closes the water inlet to the watering can.

Step 6 Check the condition of the rubber elements. We have already mentioned that the rubber rings and gasket fail. If critical wear or mechanical damage is found, replace parts.

Disassembled watering can

The body of the watering can is assembled in the reverse order. Take your time, the elements should fall into place without undue effort. Moisten the seals with soapy water to make them easier to fit.

If your water has a high calcium content, then after a few months the holes in the watering can are significantly reduced in diameter due to hard calcium deposits. As a result, the streams of water become thin and move at high speed, there are certain inconveniences during hygiene procedures. The problem can be easily solved. With a sewing needle or thin pin, clean each hole, if there is time, then remove the grid of the watering can to remove solid particles.

When cleaning the holes, do not damage them. Otherwise, the water jets will be directed in different directions.

Installing a faucet with a hygienic shower on the wall

This method is suitable for all types of sinks and is considered universal. The distance between the mixer inlets is standard and equal to 15 centimeters. The height of the water outlets must allow the shower hose to be connected without sharp bends. This is not always possible, pay attention to the place where the mixer hose is fixed and the size of the sink.

Step 1. Clean the water supply outlets from construction debris, check the condition of the thread.

Step 2 Take the faucet out of the package and assemble it according to the manufacturer's instructions. The corrugated hose of the hygienic shower is screwed on after the faucet is fully installed.

Step 3 Screw the mixer into place, do not forget to install rubber gaskets and decorative caps. It is not necessary to tighten the nuts with great effort. The main thing is that the rubber gaskets fit snugly around the circumference of the holes.

Work with a level, constantly check the verticality of the position. If you have ceramic tile bathroom walls, then use special drills to drill holes in them. Never turn the drill into hammer mode until you have completely drilled ceramic tiles. From shock loads, they will definitely crack, you will have to change the tiles. This is a long task, and it is not always possible to find exactly the same tiles.

Screw on the shower hose

To increase the comfort of using a hygienic shower, it is recommended to choose device options with automatic adjustment temperature. Automation monitors it constantly and immediately responds to changes in indicators in one direction or another.

Wall-mounted faucet with hygienic shower

Experienced plumbers can connect a hygienic shower to an ordinary bath faucet. This method can be used, but it is difficult to choose the missing fittings on your own. The fact is that it should be not only functional, but also beautiful. You need to look for special tees and switches, it is almost impossible to do this without a lot of experience. This option is sometimes used in older buildings with a combined bathroom, in which warm water is connected only to the bath, and a simple cold faucet is installed on the sink.

Video - Washbasin faucet with hygienic shower

The culture of hygiene is developing by leaps and bounds. The phrase “cleanliness is the key to health” is relevant at any time. A person always wants to keep his body clean. A faucet equipped with a hygienic shower, designed to be installed in close proximity to the toilet, can replace a full-fledged bidet.

Positive aspects of a hygienic shower

It is believed that showering too often causes as much harm as neglecting it. From constant exposure to soap products (shampoos, shower gels, soaps), the skin suffers first of all. It dries up and becomes more sensitive to various stimuli. That is why the Europeans have included in the list of the most necessary elements household bidet bowl.

A bidet takes up quite a lot of space, so installing it in a small bathroom is often impossible.

layout modern apartments in our country allows the installation of sanitary equipment of any type. Bathrooms in residential buildings European type are planned to be quite spacious. But what about the residents of buildings of the "Soviet" type? For such connoisseurs of personal hygiene, there is also a way out: installing a faucet equipped with a hygienic watering can, or a toilet bowl with a built-in bidet function.

Most often in multi-apartment "Khrushchev" you can find exactly a hygienic shower. Such popularity is due to several points that distinguish it favorably from a stationary bidet:

In addition, a wide range design solutions faucet manufacturers, will allow you to choose a hygienic shower option for any style from retro to.

Toilets with bidet function

In order to save space, manufacturers of sanitary ware have begun manufacturing compacts with a bidet function. This avoids the installation of a hygienic bowl, but has some features and installation difficulties.

Toilet with bidet function

Toilets with a built-in hygienic watering can have a much more complex mechanism than conventional compacts. Some of them are equipped with retractable water supply nozzles and buttons that actuate them. A little easier - a dedicated pipe with nozzles that work when the trigger is pressed.

Plumbing equipment with a built-in bidet means connecting a system of cold and hot water supply to it. Of course, one can only cold water, but will the effect of maximum comfort be achieved when using such a device?

Scheme: the principle of operation of a toilet bowl with a bidet function

Progress does not stand still. Among simple plumbing you can find very unusual designs. These include the toilet lid with a built-in faucet for hygienic purposes. These seats are also equipped with a hairdryer and a control unit. The prices of such products speak for themselves, but it can become indispensable assistant for people with disabilities.

Advice! When choosing complex plumbing fixtures, preference should be given to trusted brands that guarantee product quality.

The main disadvantage of plumbing with built-in bidet, hair dryer and other benefits is the very high cost of the product. But even it cannot be compared with the degree of comfort that these devices provide.

Varieties of hygiene systems for the toilet

Among all the systems equipped with a hygienic shower that can be equipped with a bathroom, there are several main types:

wall shower

The most common type of equipment is a mini-bidet. The system includes 4 main components:

• mixer;
• shower hose;
• watering can-bidet;
• wall mount.

Wall-mounted hygienic shower for a bathroom

As a rule, the faucet is installed with the marking "for bidets and showers". They do not have a tap to fill the tub and when started, the water is directed directly to the shower system. According to the principle of installing the mixer, this type of mini-bidet can be divided into 2 more subspecies:

• with a flush-mounted faucet, when on the wall surface there is only a joystick for controlling the water supply and a separate outlet for the bidet hose of the watering can;
• with mixer open type- the faucet-hose-watering can is located in an open space.

Open mixer

Attachment-bidet to the toilet

Pretty rare system. It is a unit mounted directly on the toilet bowl. The range of faucets in supermarkets is presented in a complete set:

• a platform for installing a mixer, equipped with a mount for a watering can;
• mixer;
• shower hose;
• shower head;
• pipes for hot and cold water supply.

Attachment-bidet to the toilet

The faucet is similar to the model designed for washbasins. The difference is the spout. Instead of an aerator from which water enters the sink, the product has threaded connection. A hygienic shower is screwed onto it during installation.

Washbasin combination faucet

This system is widespread. The faucet, mounted on the washbasin, has an additional outlet, which connects it to the mini-bidet shower system. The branch pipe is located on the bottom of the product in close proximity to the water supply hoses. Sometimes the manufacturer completes the mixer with a special adapter, in the form of a tee. It is screwed onto the spout, and a shower hose is mounted to the auxiliary hole.

Connecting the mini shower to the main faucet

When choosing a hygienic shower system, every detail must be considered. If the repair in the bathroom has already been completed, and the user decides to equip the mini-bidet room with a built-in mixer, it must be realized that the area in which the installation work will be carried out will have to be dismantled. In this case the best option will output an open mixer.

Advice. The hose for the bidet system is selected not very long. To avoid twisting and creases, 100-125 cm will be enough. Depending on the location of the mixer.

In some cases small bathroom equipped with a small washstand, no more than 45 cm wide. The most convenient way would be a corner sink installed above the toilet. Such a trick will not only allow you to install a mixer with a mini-bidet system, but also make it possible to carry out other hygiene procedures.

Small hand basin with mini shower

Functional features of the bidet

Many people don't see the difference between showerheads and mini bidets. Unlike its shower prototype, the hygienic watering can has a number of design features.

Important! It is strongly not recommended to leave hygienic systems under pressure. This is especially harmful for the watering can. A large number of valves and connecting systems may not withstand constant pressure and the product will fail. After use, be sure to turn off the water with a faucet or other shut-off devices.

Installation of a faucet with a hygienic watering can on the sink

This type of work is not much different from installing a conventional washbasin faucet. There should not be any particular difficulties if you follow the algorithm for performing actions. Possible self-installation. For this we need:

• faucet equipped with an additional outlet for the shower hose;
• hygienic shower system (hose, watering can, mount);
• mounting kit for installing the mixer (mounting pin, nut, clamping ring, seals), which is supplied with the mixer;

Sanitary shower mounted on the sink

• flexible hoses for connection to the water supply;
• faucets for shutting off cold and hot water;
• wrench (preferably small size);
• set of wrenches.

Follow the installation algorithm:

Important! Don't neglect seals. Their absence will lead to leakage.

During the installation process, use only high-quality connecting hoses and seals. The period of continuous operation of the entire system as a whole depends on them. It is better to immediately replace the hoses for supplying water to the mixer with which the product was equipped with better ones. This way you protect yourself from the flood.

Installing a concealed faucet

Installing a hygienic system with a concealed faucet is much more difficult than installing it on a sink. Here you can not do without drilling a wall or making a special box in which it will be hidden inner part products.

Concealed faucet

It is best to entrust the work of such complexity to a specialist, but if you try, you can do the installation yourself. To carry out such work, there are several main stages:

Advice! When buying a concealed faucet, pay attention to the presence of a mounting box. With it, you can facilitate the installation process.

Install a manual bidet according to the physiology of each user. Do not mount the mixer too low or too high. To achieve maximum comfort from using the system, check the usability. A person should not reach for a mixer or a watering can.

A hygienic shower is an additional comfort that you can easily create with your own hands

The mini bidet system for the toilet is a very important element of sanitary equipment. It will allow you to perform hygienic manipulations without moving to the bath or shower. A hygienic shower is a very convenient and functional addition to the basic elements of plumbing.

Hygienic shower for the bathroom: video

Installation of a hygienic shower: photo

The hygienic shower faucet is a compact option for people who want to install a bidet but don't have a spacious enough bathroom. Such a faucet is mounted on a sink in a combined bathroom, or on a small sink in a toilet. There are options for concealed installation of a faucet with a hygienic watering can, in which case you do not need a sink.

We do not limit the choice

In the online store, the site presents faucets with a hygienic shower in modern and classic designs, options are available in chrome, gold, bronze colors. Also, you can always choose any shower faucet or concealed faucet and complete it with a hygienic watering can from the section of our catalog with the same name. We recommend a hygienic toilet shower with a mixer from German manufacturers Grohe, Hansgrohe, Ideal Standard, Czech Lemark models, German-Italian co-production Am.Pm. Classical models in our catalog are presented by Italian firms Cezares and Migliore.

A hygienic shower with mixer is a purchase wisely

In the online store, the site is always pleasantly low prices, a large selection of sanitary ware and convenient seven-day delivery. The purchase can be paid in cash at the office or upon delivery, by card at the office or via the Internet, or by account in any bank. We work with legal entities on non-cash accounts.

Choosing a concealed hygienic shower mixer or a wall-mounted model is quite simple. To do this, it is enough to familiarize yourself with the key design features of such showers and evaluate their advantages and disadvantages. But it’s already more difficult to install a hygienic shower on your own - but even here, guided by the tips given in the article, you can handle it.

Advantages of hygienic showers

Faucets with a hygienic shower are gradually included in the list of equipment, which, if not mandatory, is highly desirable for installation in bathrooms. And if in private houses with spacious rooms there is enough space to install a full-fledged bidet, then in public buildings and small apartments there is no alternative to such a shower.

Such devices have a number of advantages:

1. With a jet warm water intimate areas of the body after the toilet are cleaned much more efficiently than when using toilet paper.
2. The skin, and most importantly, the mucous membranes are not injured, since the friction during cleaning will be minimal.

1. The impact of a jet of water from the shower can be regarded as a kind of massage that promotes the activation of blood circulation in the small pelvis.

According to statistics, those who use a hygienic shower instead of toilet paper on an ongoing basis are much less likely to experience such diseases as hemorrhoids, prostatitis, rectal erosions, etc.

1. A plus is the effective maintenance of the sanitary condition of the restroom. A jet of water from the shower immediately flushes all impurities into the toilet, so you can refuse a bucket with "fragrant" used paper.

1. Finally, hygienic mixer showers are convenient from a utilitarian point of view. Sufficiently long elastic hose allows you to effectively wash plumbing. In addition, this design is great for washing baby pots, cat litter boxes, floor buckets, etc.

Well, the main plus is that both the wall-mounted, and even more so the built-in hygienic shower has a very compact size. Thanks to this, it can fit even in the most compact bathroom, where there is only room for a toilet. This similar products compares favorably with classic bidets.

Design features

Varieties of hygiene devices

For the treatment of intimate parts of the body after the administration of natural needs, the devices of the different type. Each of them has its own characteristics, therefore in this section I will only give brief description main groups:

It is the last option described in the table that is the most common. So in the future I will disassemble it.

Essential elements

A hygienic shower installed in toilets consists of several main elements:

1. The central part of the design is the mixer, used to regulate the supply of water and select its temperature. The reliability of the entire system directly depends on the choice of mixer, therefore a separate subsection will be given to the description of this part.

1. Shower hose - flexible tube connecting the faucet to the shower head. The optimal length of the hose for a hygienic shower is from 1.2 to 2 m. This part can be made of either plastic or rubber with a decorative braid. Polymer models are more durable, but they have less fracture resistance, so you need to use such hoses carefully.

1. Shower fittings - various hooks and clips, which are placed on the wall near. Can be made from bronze, brass or steel decorative coating protecting against corrosion. Silumin fixtures are usually supplied with showers from the economy segment, but their service life is limited due to their low strength.

Sometimes the bracket is combined with a pipe for connecting a hose. In this case, it is placed simultaneously with the water supply system and connected to the mixer.

1. shower head- fixed at the end of the hose, provides atomization of the water flow. They differ not only in design, but also in functionality. Most useful features are flow switching (from jet to small drops) and pressure adjustment directly on the nozzle. It is highly desirable to purchase just such models that can be turned on with the same hand with which you hold the watering can - this is very convenient!

Mixer types

The mixer, as I mentioned earlier, is used to adjust the pressure and temperature of the water coming from the water supply to the hygienic shower head.

To date, the following types of mixers are used:

1. Two-valve- the cheapest, easy to install and maintain. In fact, they are a pair of faucets with rotary axle boxes, connected respectively to pipelines with hot and cold water. The selection of the optimal water temperature is carried out by alternately rotating the flywheels on the taps, but with pressure drops in the system, the temperature can change unpredictably.

1. Single lever- make up the bulk of mixers for this category of sanitary equipment. Here you can find both an outdoor hygienic shower with a mixer, and a model for concealed installation, in which only a handle for adjusting the pressure and temperature is visible on the wall.
   The central element of such a mixer is either a cartridge or ceramic box connected to the water supply pipes. Single-lever models are more expensive and more difficult to install, but much more convenient to use.

Sometimes the catalogs do not indicate the type of locking element. In this case, we pay attention to the product code and then look for the characteristics of this particular model on the manufacturer's website. The information obtained will be useful both when choosing a product and when searching for parts needed for replacement in the event of a breakdown.

1. Mixers-thermostats- the most modern products. Inside the device there is a thermostatic element, thanks to which the outlet water temperature is always maintained at the same level. This contributes to the maximum level of comfort in use, but such a mixer is, alas, quite expensive.
   Unfortunately, finding a high-quality hidden thermostat is not easy, so you have to put up with the presence of a mixer body on the wall.

If you choose according to the optimal ratio of "price-functionality", then it seems to me the best choice installation of a single-lever built-in or wall-mounted model. On the one hand, you can find models with a very reasonable cost and install them yourself. On the other hand, the presence of an adjustment system makes it easy to adjust optimum temperature and water pressure.

Self-assembly

Stage 1. Preparatory work

One of the advantages of hygienic showers is enough simple technology their installation. You can install the product with your own hands, without involving specialists. Naturally, in this case, it is necessary to observe certain accuracy, acting strictly according to the instructions.

The installation process itself depends on which model you will mount, as well as on the condition of the room itself. For the installation of wall-mounted and built-in mixers with a hose, it is necessary to cut the walls for pipe laying. But a hygienic shower can be placed on the sink even after finishing work is completed.

Gating can be abandoned in the case of wall cladding with plastic, drywall or other materials with sufficient moisture resistance. So the installation process will be less laborious, but the pipes will still have to be fixed on the walls.

The preparatory stage includes the following operations:

1. First choose a place on which the mixer will be installed. It is desirable that a person can reach the lever or valves without getting up from the toilet.
2. Now we apply markings on the walls for laying pipes. As a rule, pipes with hot and cold water rise vertically to the mixer, but here it all depends on the initial configuration of the water supply.

1. Now let's start chasing the walls. First, we select a hole with a depth of 85 - 100 mm for installing the mixer body. Then we bring strobes for pipes to this hole. We clean the grooves cut or hollowed out by a perforator from splinters of concrete / brick and dust.

1. We install a mounting box in the hole under the mixer. We fix the box either with struts or using cement mortar.

The mounting box may not be included with the mixer - then you will have to purchase it separately. Concealed installation is also allowed without installing a box: in this case, the mixer is fixed directly in the wall niche.

1. Laying pipes, bringing them to the hole in the wall in which the mixer will be installed.

1. If you plan to install wall model or devices with a thermostat, then you won’t have to mess with the hole and install the box. Instead, pipes are brought to the surface, fixed in such a way that they are exactly opposite the holes for connecting the mixer.

Stage 2. Installing the faucet and other shower elements

Installation instructions for a hygienic shower will also differ.

So, when working with the built-in model, we act like this:

1. We install the mixer mechanism in a box or wall niche.

1. Connect hoses to it. connected to water pipes(hot and cold water).
2. Face plate may need to be installed, to which the outer part with a lever or flywheel will be attached in the future.
3. After installation is completed, we close the strobes and do finishing work.

1. over finishing wall install decorative trim, and then we attach the flywheel / control lever for pressure and water temperature to the axle box or cartridge lever.

Mounting the wall model will be much easier:

1. To the conclusions of the water supply, fixed on the wall, we connect the nozzles on the mixer body.
2. We fix the product using nuts with sealing gaskets, trying to tighten them tightly, but without deformation.
3. When using a model with a thermostat, we check the performance of the thermostatic element.

With the model for the sink, everything is quite simple: just fix the faucet body on the sink itself and connect the hot and cold water supply hoses to it from below.

Now it remains for us to perform the final operations:

1. In the selected place, with one or two anchor bolts, we fix the retainer for the shower head. If it is necessary to install the mount on a tiled wall, we use a special tile drill.
2. We attach a shower hose to the threaded pipe on the mixer. We check the tightness of the connection.
3. We apply pressure and control the absence of leaks. Also at this stage, it is worth checking how well the pressure and temperature are regulated, and also whether the water on / off lever on the shower head functions reliably.
4. After that, we hang the watering can on mounted mount . You can use the hygienic shower!

Conclusion

The hygienic shower installation technology described above can be applied to almost any model. similar devices. To understand the nuances, you should study the instructions from the manufacturer and watch the informative video in this article.

If you still have questions after that, you can ask them in the comments.