Currently, various life hacks are very popular - all kinds of devices, little tricks that make life easier. Our story will tell you about one of these devices, indispensable at the dacha or on a camping trip, and at the same time extremely simple to manufacture.
Device
A treadmill shower is a portable device that has 2 hoses, one of which is lowered into a container of water, and a watering can is attached to the second, which sprays a stream. Both hoses communicate with each other through a special mat with pedals, pressing which acts like a pump. The mat with the pedals lies on the floor, which makes it very easy to alternately press the pedals, while keeping your hands free.
Pumps. Most often, 2 pumps are used, connected in parallel to the inlet and outlet. When applied to the pump, the pressure in it increases, the release valve opens, and water enters the hose with a watering can at the end. At the next stage, the pressure decreases, the pump body increases in volume, resulting in the creation of a rarefied environment. The outlet valve closes, the inlet valve opens instead, and water is drawn into the pump body (nature, as we know, does not tolerate emptiness). 
A pump installed in parallel on another pedal works in a similar way. The pressure exerted alternately in this way ensures a continuous flow of water.
Hoses. Hoses should be corrugated (preferably). The hose supplying water to the pump operates with negative pressure. The corrugation prevents it from shrinking. The hose supplying pressure to the aerator operates with increased pressure. The length of the hoses can vary up to 2 meters. It can be changed to suit your personal requirements.
Watering can-aerator. Creates a comfortable water flow, breaking one stream into many thin streams.
Did you know? The prototype of the modern shower was invented in Ancient Greece. Such a shower is depicted on vases found during excavations in Athens, dating back to the 4th century. BC. During excavations at Pergamon, located in modern Turkey, the ruins of public showers were found. The time when they were actively used was established-II century BC.
Water pressure
The force of pressure depends on the pressure exerted on the pump. The uniformity of pressure is affected by the rhythm and synchronization of steps, and the force of the flow depends on the pressure on the pump. Also, the pressure depends on the height to which the water is supplied.
How to use
The device is very easy to use. Depending on the modification, the process may differ slightly. But in general, the main stages in the operation of the device are as follows:
- Assemble all parts of the shower (attach the hoses to the pump mat) if the device is dismountable.
- Choose a place for the watering can-aerator (a branch at a suitable height, a hook on the wall of the house, etc.), place a rug with pedals under your feet.
- Lower the hose without a watering can into a tank of water.
- By alternately working your legs, create pressure in the pump. You can change the force of pressure by the intensity of pressure on the mat.
VIDEO: HOW TO USE THE STOPPING SHOWER
Important! Leave 1/3 of the volume of the container for air. This volume is enough to create the pressure necessary for the water to completely leave the tank. Do not pump a large volume of air into the pump; remember that a pressure of 1 atmosphere raises the liquid by 10 m.
Advantages
The shower has a number of undeniable advantages, among which the following should be highlighted:
- Compact and easy to prepare for work and collect after work. When folded, it takes up very little space and has a fairly low weight (the weight of many factory models does not exceed 2-3 kg).
- Simplicity of design. The only condition for operation is the presence of water. Naturally, if you are going on a hiking trip, taking water with you for taking a shower is an unaffordable luxury. But for motor tourists or for a summer residence this is not a problem.
- Does not require electricity (this criterion can be listed as a plus and in the safety category).
- The ability to regulate the pressure (the stronger the pressure on the pedal, the stronger the jet).
- Economical. You use water only when needed. A bucket of water is more than enough to wash your head.
- Possibility to install the watering can at a convenient height.
- Multifunctionality of the device (this point will be discussed in more detail below).
- The simplicity of the design makes it possible to manufacture the device using available materials.
- Low price of the device.
Flaws
Now a few words about the “fly in the ointment” in such a big “barrel of honey”:
- The need to perform certain actions can be considered a certain inconvenience. Of course, it is easier to turn on the electricity than to mark time, creating pressure using your own weight and movements. But this circumstance is insignificant in comparison with other advantages.
- Lack of warm water. In order for hot water to flow from the device, it must first be heated (in the sun, on a fire, etc.).
- A weight of 2-3 kg in the case where every 100 g of hand luggage is taken into account (for example, on a hiking trip) is not so small. In conditions that are not prepared in advance for taking water procedures, you will have to equip a place for a shower (like a cabin, fenced on four sides).
Did you know? At the beginning of the 20th century, the famous psychiatrist J.M. Charcot, a hydromassage shower was invented, later named after its inventor. In addition to the massage effect, the shower helps restore blood flow, improves mental state, and helps remove fat deposits.The procedure is carried out in this way: from a distance of 3-5 m, two powerful water jets are directed at the person, one- temperature 45° S, other - 20 ° From above zero.
DIY making
The simplicity of the design of the device allows you to make it yourself without much effort. Below is step-by-step instruction making a shower trampoline at home.
To make it you will need:
- car pump with foot drive;
- hoses made of rubber (plastic, preferably corrugated);
- plastic container with a lid;
- aerator nozzle;
- metal tube with thread;
- drill.
When all the parts are ready, you can begin assembling the device. Here is circuit diagram manufacturing the device. If you are smart, you can probably make some changes to the design.
When the conversation turns to making a structure such as a shower, in most cases craftsmen imagine a booth with a tray connected to a water supply, or on which a water container is installed. But, in case finished products If you can’t find it, you have to use any available material or products with a different purpose. Based on this, the question of how to build a shower with your own hands using the maximum number of elements required for this is also fascinating to skilled experts.
Hiking options
When going on vacation to nature, a person tries to provide himself with greater comfort on the spot. In addition to this, carry with you a large number of you don’t need things, and when loading the car there are a lot of necessary items that you need to take with you. Based on this, a typical tourist shower should occupy minimal space, be lightweight, or be made from existing items with a different purpose.
Store designs
Of all existing models systems for similar purposes, it is necessary to emphasize only one. It has the form of a simple tight bag, to which is attached a small valve with a detachable watering can and a hatch with a lid for filling. Along with this, it is worth emphasizing that the price of such a design is low, and it takes up minimal space, practically weighing nothing.
This product is filled with water and hung on a tree. After this, opening the valve, they begin to use it as a simple shower. It is worth emphasizing that the operating instructions also allow the use of warm water, but any specific model has its own permissions.
Considering the features of this design, it can be classified as a marching one. Along with this, you can create a semblance of this device yourself, using a tarpaulin or film.
Advice! A similar system can also be used for transporting and storing drinking water. Based on this, the need for it on hikes is obvious.
Homemade products
Most tourists make a basic shower from a canister with their own hands, without damaging the product. It is enough to bring an additional cover with you, in which holes are made in advance. It is put on after filling with water and used as a watering can.
In addition, it is possible to use large plastic bottles or other similar containers. But if there is a strong need, the easiest way is to use a kettle, put a watering can on the spout and hang it on a tree. You can build such a shower in nature with your own hands in a couple of minutes..
Advice! There are quite a few ways to organize the supply of water from a height, but spraying a stream is only possible from a watering can. Based on this, it is worth taking it with you.
Country houses
When creating a shower on the site with your own hands, you have to deal with a number of troubles, which need to be solved taking into account the terrain and the expected level of required comfort. Based on this, the manufacturing process should be divided into stages.
Pallet
- The easiest way is to make a cushion with crushed stone and sand, on top of which they install wooden pallet . This is how, in most cases, they make a shower in the village with their own hands, assuming that the drain will go straight into the ground.
- In addition, the method of making a cement base is quite common.. You can fill it yourself or use a ready-made slab for this. Along with this, it is mandatory to make a bias towards the intended drainage system. To simplify the work, some craftsmen use stones that are compacted into the ground.
- If you are making a shower with your own hands, then it is possible to use any available materials. The main thing is that they can be easily walked on, in addition to the presence of water, and there is the possibility of organizing drainage.
Advice! The drainage of water must be done in such a way that the liquid goes into the ground, and not under the foundation of the building.
Tank
- While you are making a shower in the yard with your own hands, you should immediately think about what kind of container should be used for water. This is especially important if it is not possible to buy a regular tank.
- It’s worth emphasizing right away that the barrels that previously contained chemical substances or petroleum products are not suitable for these purposes. They may contain sediment, which will later dissolve in water and can lead to poisoning of the body.
- In addition, open containers should not be used. Sick birds or their waste products can get into them.
- The easiest way is to make a shower from a Eurocube with your own hands, because this container is excellent in all respects and at the same time has a sufficient quantity. But you need to take into account the enormous weight and use strong supports during installation.
- The tank for similar purposes is selected very carefully, because it is the basis of the entire structure and will depend on it appearance frame.
Advice! Installing a faucet with a watering can on a container is quite simple, but do not forget that it is best to use a screw or needle locking mechanism. These systems allow you to precisely regulate the pressure force, which significantly increases the level of comfort.
Fencing
Some craftsmen prefer to create the simplest ceilings using plain film. But, in case it is done solar collector for a DIY shower, it is assumed that the structure will be in the open air and light will penetrate through it. This leads to a certain discomfort for some people, because the internal space will be visible.
Given this feature, experts advise using profile pages or moisture-resistant plywood. In addition, dry reeds are suitable for these purposes, which are tied together, creating a complete overlap.
Advice! Sometimes dilapidated building materials are excellent for such a task. But they need to be put in order and exposed protective treatment. Simple paint may be suitable for this.
Constructions in the apartment
Sometimes such situations arise when you need to install a shower in your apartment, but at the same time there is no way to install a shower cabin. Then it is possible to use intentionally created structures or non-standard technical solutions.
Bath
The easiest way to install a shower in an apartment with your own hands is if it is placed in the bathroom. It is possible to use the bowl itself as a pallet, but at the same time, in places where it comes into contact with the wall, it is necessary to seal all joints using sealant. In addition, it is assumed that installed mixer will have a shower head that can be fixed to the wall.
Then you should buy a special fence or curtain that will protect the room from splashes. At the same time, it can completely cover the entire perimeter or only the bathtub, which is located a meter from the mixer.
Advice! Such solutions are quite simple, because they have been used in the distant past and some companies are developing a lot of products for them. But when choosing them, you need to be careful so that all the elements are perfectly combined with each other into a single system.
Toilet
In addition, in our time there are still apartments that do not have a room like a bathroom. In addition, they are seen as an environment at a time when people are buying a dorm room and want to take personal amenities while saving space. Based on this, in such cases, a shower room in the apartment is made with your own hands, but it is connected to the toilet.
First of all, in similar situations, you need to drain. Along with this in sewer pipe they cut a branch, which is walled into the floor screed with waterproofing, making something like a storm drain at an angle. It goes without saying that the level of the threshold and floor will rise very much, but this is a necessity that cannot be avoided.
Then simply install a mixer with a shower head on the wall. In such a room it is possible to receive normally water procedures. Along with this, a closed toilet seat will serve unusual chair, which is quite convenient for some people.
Advice! Such a solution can be called extreme, but in certain technical conditions it is the only one. But if it is possible to use just the cabin, then it is worth using it.
Conclusion
After reviewing the video in this article, it is possible to study these designs and the principle of their manufacture in more detail. In addition, taking the text above as a basis, it is worth concluding that, in fact, in arbitrary conditions, human ingenuity allows you to create designs that can significantly expand the level of comfort.
Along with this, making a shower with their own hands from scrap materials, the craftsmen take into account all the wishes of future users. This gives rise to the most extraordinary designs with fantastic design and technical highlights.
When it comes to making a structure such as a shower, craftsmen usually imagine a booth with a tray connected to a water supply, or on which a water container is installed. However, if it is not possible to find finished products, then you have to use any available material or products with another purpose. Therefore, the question is how to build a shower with your own hands using minimal amount elements required for this, is of interest even to experienced specialists.
Hiking options
When going on vacation to nature, a person tries to provide himself with maximum comfort on the spot. At the same time, you should not carry a lot of things with you, and when loading the car there are a lot of necessary elements that you need to take with you. Therefore, a typical tourist shower should take up minimal space, be lightweight, or be made from existing items with a different purpose.
Store designs
Of all the existing models of systems for this purpose, only one is worth noting. It looks like an ordinary tight bag, to which is attached a small valve with a detachable watering can and a hatch with a lid for filling. It is worth noting that the price of such a design is quite small, and it takes up minimal space, weighing practically nothing.
This product is filled with water and hung on a tree. Then, opening the valve, they begin to use it as regular shower. It is worth noting that the operating instructions allow you to use even hot water, but each specific model has its own tolerances.
Considering the features of this design, it can be classified as a marching one. At the same time, you can create a semblance of this device yourself using a tarpaulin or film.
Advice!
A similar system can also be used for transporting and storing drinking water.
Therefore, the need for it on hikes is obvious.
Homemade products
Most tourists make a basic shower from a canister with their own hands, without damaging the product. It is enough just to have an additional cover with you, in which holes are made in advance. It is put on after filling with water and used in.
You can also use large plastic bottles or other similar containers. However, if there is a strong need, the easiest way is to use a kettle, put a watering can on the spout and hang it on a tree. You can build such a shower outdoors with your own hands in a few minutes.
Advice!
There are many ways to organize the supply of water from a height, but you can only spray a stream from a watering can.
Therefore, it is worth taking it with you.
Country houses
When creating a shower on the site with your own hands, you have to face a number of problems that need to be solved taking into account the terrain and the expected level of required comfort. Therefore, the manufacturing process should be divided into stages.
Pallet
- The easiest way is to make a cushion with crushed stone and sand, on top of which they install. This is how they usually do a shower in the village with their own hands, assuming that the drain will go straight into the ground.
- The manufacturing method is also quite common. concrete base . You can pour it yourself or use a ready-made slab for this. In this case, they must make a bias towards the intended water drainage. To simplify the work, some craftsmen simply use stones that are compacted into the ground.
- If you are making a shower with your own hands, you can use any available materials.. The main thing is that they can be easily walked on even in the presence of water, and there is the possibility of organizing drainage.
Advice!
The outflow of water must be done so that the liquid goes into the ground, and not under the foundation of the building.
Tank
- When making a shower in the yard with your own hands, you should immediately think about what kind of container should be used for water. This is especially important if it is not possible to purchase a standard tank.
- It’s worth noting right away that barrels that previously contained chemicals or petroleum products are not suitable for these purposes. There may be a sediment left in them, which will then dissolve in water and can lead to poisoning of the body.
- Also, do not use open containers. They may contain sick birds or their waste products.
- The easiest way is to make a shower from a Eurocube with your own hands, since this container fits perfectly in all respects and at the same time has sufficient volume. However, the heavy weight must be taken into account and strong supports must be used during installation.
- The tank for such purposes is selected very carefully, since it is the basis of the entire structure and the appearance of the frame will depend on it.
Advice!
Installing a faucet with a watering can on a container is quite simple, but it is worth remembering that it is best to use a screw or needle locking mechanism.
These systems allow you to precisely regulate the pressure force, which significantly increases the level of comfort.
Fencing
Some craftsmen prefer to create the simplest ceilings using regular film. However, if you make a solar collector for a shower with your own hands, then it is assumed that the structure will be located in the open air and light will penetrate through it. This causes some discomfort for some people as the interior space will be visible.
Advice!
Sometimes old Construction Materials are perfect for this task.
However, they need to be put in order and subjected to protective treatment.
Regular paint may be suitable for this.
Constructions in the apartment
Sometimes situations arise when it is necessary to install a shower in an apartment, but it is not possible to install a shower stall. Then you can use specially developed designs or non-standard technical solutions.
Bath
The easiest way to install a shower in an apartment with your own hands is if it is located in the bathroom. You can use the bowl itself as a pallet, but in the places where it touches the wall you need to seal all the joints using sealant. It is also assumed that the installed mixer will have a shower head, which will be able to be fixed on the wall.
Next, you should purchase a special fence or curtain that will protect the room from splashes. At the same time, it can completely cover the entire perimeter or only the bathtub, which is located a meter from the mixer.
Advice!
Such solutions are quite simple, since they have been used for a very long time and some companies are developing a lot of products for them.
However, when choosing them, you need to be very careful so that all the elements fit perfectly together into a single system.
Toilet
Even in our time, there are still apartments that simply do not have such a room as a bathroom. There are also situations when people buy a room in a dorm and want to get their own amenities, saving space. Therefore, in such cases, a shower room is made in the apartment with your own hands, but it is connected to the toilet.
First of all, in such situations it is necessary to drain. In this case, a branch is cut into the sewer pipe, which is walled into the floor screed with waterproofing, making something like a storm drain at an angle. Of course, the level of the threshold and floor will rise significantly, but this is a necessity that cannot be avoided.
Next, simply install a mixer with a shower head on the wall. In such a room you can safely take water procedures. In this case, the closed toilet seat will serve as a kind of chair, which is very convenient for some people.
Advice!
Such a solution can be called extreme, but under certain technical conditions it is the only one.
However, if it is possible to use the cabin, then it is worth using it.
Walks in nature, overnight hikes, tent camps or just an unfinished dacha... What unites these seemingly completely incompatible places? One small nuance, which is difficult for a person accustomed to the benefits of civilization to refuse. Namely, in any, as they say, Spartan conditions, you cannot take water procedures. Simply put, you cannot take a shower in nature or in unfinished infrastructure. Sometimes this becomes a problem that does not allow you to relax properly and plunge into the atmosphere of real relaxation. Without getting ahead of ourselves, we can say: the problem is being solved! How? Another, no less interesting question.
Outdoor shower
Yes, whatever inventive people can come up with. Pohodnoy country shower this is no exception. Why "dacha"? The fact is that often, looking behind gardeners’ fences, you can see a simple structure that is taken out and brought into the house every evening. That's why they called her the dacha girl.
But the lack of goods on your favorite piece of land does not limit the possibilities of the above invention. Hiking, long walks, overnight stays - everywhere such a necessary thing as a camp shower can come in handy.
An easy choice
The needs do not go unnoticed, so the “smart” Chinese have learned to mass produce these designs. A camp shower can take any form, to suit any taste and preference. Needed closed type- Please. The tent with a built-in tank is ready for use. All that's left is to fill in the water. Ten, fifteen and even twenty liters are at the disposal of the clean traveler. There are also lighter designs: a frame with cellophane curtains, at the top of which you can see a small barrel.
A camp shower of this type has no disadvantages. Among the advantages you can consider lightness and low cost. All of these options are great for hiking and traveling, but the question arises: “Why buy?” It's no secret that the need for invention is cunning. You shouldn't pay money for something you can build yourself. For example, you can do camp shower with your own hands. It will perform its functions just as well as its commercial “brother”.
How to make a camp shower with your own hands
There is no need to reinvent the wheel in this matter, everything has already been invented and tried a long time ago. There is only one task - to make a good camp shower with your own hands, which should have such properties as ease of construction, low cost (it is advisable that all materials for the construction are at hand) and relative comfort.
First building
How to make a camp shower when there is almost nothing around, only nature itself? It doesn’t matter, simple options will always find their use. Everything ingenious is elementary. The same can be said about shower designs. The first thing that comes to mind for such a thing is plastic bottles. Yes, there are no limits to imagination here. You don’t need a lot of material to build a camp shower from plastic bottles.
The first and most important thing is capacity. The bigger it is, the better. After all, the water will flow longer, which means that the soul will be enough for a leisurely swim. Ten or five liters with proper and rational use enough. So, there is an eggplant. We need to start construction. This option will be the most comfortable, so you will have to work. The empty container should be placed slightly higher than your own height. Otherwise, when taking a shower you will have to bend down, which is not very pleasant. But here it is important not to overdo it, otherwise the procedure of filling the eggplant with water will take a lot of time and effort. You need to make a small hole in the “shower” container. Water will flow out of it. You need to insert a small hose into this hole; it will make taking a shower easier. There will be no need to wriggle in front of the stream. It is advisable to treat the joints well with resin or plasticine so that water does not leak out. I made my first camp shower with my own hands. Of course, you can add something of your own to it, it’s up to your imagination.
Second building
There is the most reliable and proven method, which everyone has probably used. This is a bucket. No, you shouldn’t pour it out in one gulp: there will be little effect. This design worth redoing. A couple of steps - and the bucket will turn into a camp shower. For this design you will need a few tools and materials: a drill, a large and long bolt, sandpaper, a nail and a nut (of course, the same size as the bolt). So, you need to make a hole in the bucket with a drill. If you don't have one at hand thin instrument, the hole can be made with a nail.
But it will not be neat, so the edges should be additionally sanded. All that's left to do is to thread the bolt into the hole and not fully tighten the nut. Thus, we got a large washbasin. You lift the bolt and water flows; when you release it, water does not flow. This is very convenient because the liquid does not run in vain, only when it is needed.
How to arrange a shower
Typically, a camp shower is built for a short period of time. A day or two - no more. Therefore, many are not too worried about the arrangement of the structure. But when it comes to constant use, you really need to count on convenience. For example, shower curtains.
They will add home comfort. Curtains must be made of waterproof material. Film will work great. How to secure it? Around the tree, using branches, you can stretch a rope, and hang a curtain on it. You should thoroughly inspect the area near the shower. There should be no extra branches, needles, thorns, splinters or cigarette butts. Taking a bath next to garbage is not only unpleasant, it can be harmful to your health.
Do you like to be outdoors? Can't imagine life without hiking around your native land? Are you building a summer house while you have nowhere to wash? Or maybe you just love extreme sports? You'll have to learn how to build a camp shower with your own hands. You can make it from almost any available containers. Wash in warm water, a warm room is not only pleasant: in cold weather, your health can depend on such a shower. Even novice nature explorers can build a camp shower.
We build a watering can
The simplest shower it works like this. A curtain is attached to the tree (if you want to wash alone). A hole is made in the cap of a large plastic bottle into which a piece of hose is inserted. The cap itself is taped to the bottle with electrical tape (if there is a hose). If it is not there, then for water to flow, just unscrew the lid. For a large container, any thin hose is suitable, for a “one and a half” - a tube from a dropper. It must be securely secured in the hole in the lid. To prevent water from flowing spontaneously, you can clamp the hose with a stopper or use a wire hook to attach the end at the top. Next - cut out the bottom of the bottle, close the lid, and attach it to a high branch. For convenience, you can place the bottle in a net or simply attach it to a branch with wire. The simplest camp shower is ready. Instead of a plastic bottle, you can use a heating pad, etc. This device is quite suitable for summer time.
But what to do if you are on a hike, around a mountain and -20°C, and you really want to wash? Actually, it is the next structure that will be what is called a “real camp shower.” Naturally, it can be done anywhere, but they say it was the climbers who came up with this method of hygiene.
We build a portable camp shower
Actually, only the curtain will be portable and we assemble all other parts right at the rest stop. We will need:
- Devices for lighting a fire.
- The boulders are the size of a three-year-old boy's head, but a bucket of regular pebbles or other stones can also be used.
- Curtain.
- Plastic bottle with stopper and hose.
- A tent or film stretched over a frame. The frame can be carried with you, or it can be built between trees.
In order to build warm shower camping, we light a fire, put stones in it, and heat water over the fire. While everything is warming up, we assemble something like a wigwam from cellophane (if there is no empty tent). You can use branches, etc.
We make a fastening above the wigwam: we will hang it here plastic bottle(see device above) with water. When the stones warm up, carefully place them around the perimeter of the “wigwam”. This is the most dangerous part of the procedure: you can get burned. Boulders or pebbles must be cooled in the teepee so that you can stand on them. As they cool, they heat up the air very much. Then we hang the bottle with hot water and... enjoy your steam! Usually the stones allow 4-5 tourists to take a shower, and only after that the “room” begins to cool down. If you do everything quickly and take more boulders, then even a group of 15 people will have time to complete the required bath procedures.
