Drywall grips. What is the fastest and easiest way to move drywall? Nozzles for mixing mortar

Everyone is good popular finishing material drywall, easy to use, practical and versatile, suitable for walls, ceilings, various structures and partitions, if not for one "but". Produced in the form of heavy large-sized sheets, it is inconvenient in delivery and transportation. Yes, and mounting or raising such panels to the desired height alone is not an easy task. Simplify the use of drywall will help a device for carrying drywall, the choice of which depends on the characteristics of the work being done.

Types of devices for transporting plasterboard sheets

Based on the need, complexity and scale of the repair, you can choose one of the following types of devices for working with drywall:

Carry handle.
Carrying strap.
Mounting support.
Frame lift on wheels.

The list of devices is quite wide - from complex professional to simple ones that you can quickly make with your own hands. Let's consider all the presented types in more detail.

carrying handle

Carrying handles sheet materials are of two types:

To move the GKL alone.
Model for two people.

The first modification allows you to manage the transfer of drywall without helpers. The durable plastic housing ensures that the plate is securely fixed in the desired position, and a comfortable grip allows you to gently move the bulky sheet, holding it with your free hand.

The second, two-handed model, usually sold as a set of two, allows you to carry 1 or 2 sheets. The plate is vertically located between a pair of "rogulins" on comfortable height, the free part of the GKL is supported by the hand.

Making your own transfer

The simplest device for moving GKL alone can be made from improvised materials. A small master class - convenient home-made carrying in 5 minutes:

Four trimming of metal-profile guides are selected, which always remain during the installation of drywall structures.
The elements are fastened together with self-tapping screws in the form of a square. For rigidity, it is recommended to mount 2 pieces in each corner.
In order for the GKL plate to be freely installed, one of the corners of the profile is unbent.

Mounting support

A suitable device for working with GKL layers is a mounting support. It is a metal lever on a stand, equipped with a movable stop-lock. The device is indispensable when creating walls, niches, and similar surfaces, as it allows you to raise the plate to the required height (50–80 cm) and hold it in a vertical position. With its help, a drywall sheet is securely fixed on the profile and fastened with self-tapping screws.

The design of the support can be equipped with a pedal for lifting material, which facilitates height adjustment, but limits the movement of the master, which means that you cannot do without a partner.

Frame lift on wheels

For complex work, such as the installation of ceiling elements or ventilation ducts, a mobile frame lift is used. Such a device allows you to move heavy and bulky gypsum boards both vertically and horizontally, as well as securely fix them on the frame for subsequent fastening. The upper holder of some modifications is equipped with a tilt angle regulator for the sheet being held.

Technical parameters and characteristics of lifts may vary depending on the manufacturer. The load capacity, as a rule, is 50–60 kg, the lifting height is 3–4.5 m. Such devices are made of steel or aluminum.

Learn more about the characteristics and use of the device, as well as about its self-manufacturing can be read.

What to choose?

Summing up, we can draw the following conclusion:

for professional installation, it is worth choosing reliable and lifting devices - a trolley on wheels, a frame lift;
for home repairs, a carrying handle, belt, mounting support are suitable.

Some of these devices can be made independently from improvised materials, saving money and improving your skills as a craftsman.

When carrying out repairs and construction works Quite often, drywall is used, a material that can be called universal. It is used for the construction of partitions, when leveling walls and ceilings, if necessary, to create an unusual, very attractive ceiling structure of one or more tiers. But the GKL sheets are quite heavy, lifting them alone and correct installation often difficult. That is why it is recommended to use special drywall lifts or a carrying handle, which greatly simplifies the work, makes it faster.

Scheme of the plasterboard device.

Such portable tools for plates perform the following functions:

Lifting to the required height and fixing drywall sheets in the required position. The most demanded lifts are those that lift the slabs in a horizontal position to the required height during installation. suspended ceilings.
Carrying drywall to the place of work with simple and very comfortable handles.
Holding the free edge during installation, quickly moving the sheet and lifting it.

Worry-Free Carrying Devices

For carrying drywall sheets today the most various devices. All of them differ in their design, size, purpose. But they are united by one thing - the ability to speed up work, ensure the transportation and lifting of drywall sheets to the desired position.

The scheme of the device lift for drywall.

Today, such devices for transporting plates are used, such as:

carrying handles for several sheets;
wall lifts with fixing supports;
lifts for ceiling work;
universal devices for lifting and transportation;
tables and trolleys that allow you to move and lift the plates to the required height;
equipment designed for transportation and performance of certain technological operations such as cutting, making holes and others.

Some types of equipment are not only lifts, but also special spacer frames that allow you to quickly lift the material. Such devices are used in the installation of single-level and complex suspended ceilings, they allow you to fix the position of the plate when they are attached to the profile with screws or for the time required for the special adhesive to dry.

When working with such types of equipment, it is necessary to follow safety rules, as for any other construction equipment, remember that gypsum boards have a fairly significant weight, and if they fall, they can seriously injure. Therefore, when loading, you should correctly calculate the weight of the sheets, do not stack more than it is provided for by the operating rules. And the rest is simple and convenient.

Carrying handles

Handles for transporting GKL can only be carried 1-2 sheets.

Most often, a special carrying handle is used to transport drywall sheets, which can take the most various forms. You can transfer no more than one or two sheets at a time, but this is often enough to ensure quick installation. The use of such handles is possible only together, that is, a set of two handles is used. The drywall gripper is at a comfortable height, with one free hand holding the sheet in the correct vertical position.

There are options for such pens that are designed for single use, but only one sheet can be transported here.

This handle is used only for small amounts of repair and construction work, since carrying one sheet at a time will not reduce the installation time. Therefore, it is recommended to use handles when repairing a private house, but for large areas it is best to give preference to special carts, tables and supports, which not only allow you to transport a large amount of material at a time, but also perform with the help of some technological operations necessary in the preparation of drywall to installation.

Tricycle trolleys and supports

An example of the use of a three-wheeled trolley and support.

When installing large volumes of drywall, it is recommended to use a device that allows you to move and lift sheets with a large weight. Usually this is a very massive equipment with a load capacity of up to 400 kg. Such carriers serve to transport a package of sheets to the work site, are used in construction or repair work on a significant scale. All GKL sheets are stacked on the edge, have a slight slope. Usually these are three-wheeled carts that are convenient to move around the territory.

Special cart tables are also used, on which up to twelve large sheets of drywall can be loaded from above at a time. They are used for transportation and other technological operations related to the preparation of sheets for installation. Plates can be cut on them, holes can be made in them of the required size and shape.

Mounting supports for drywall are devices that are a lever and a wooden movable stop, which allows you to adjust the height of the gypsum board. With the help of such a device, it is possible to hold the sheets in a vertical position, which is necessary when sheathing the walls of the room, when installing various partitions while they are fastened with self-tapping screws, or when the drywall adhesive is cured. Such supports provide reliable fixation of the sheet to the frame when it is raised to the required height. This makes it possible to quickly and without damage to the edge of the sheet to install a GKL plate with any size.

There is also special device, with which you can not only maintain the plates in a vertical position, but also fix them if necessary. Such equipment with a stop-lock is considered more reliable and of high quality, while its height can be only 80 cm.

Pedal devices provide material lifting, height adjustment is carried out using a pedal. This is not always convenient, since the actions of the installer are limited precisely by the need to press this pedal, so such equipment is rarely used for large-scale work.

Frame lifts

Frame lifts used to lift drywall sheets allow you to move drywall boards vertically and horizontally, fix the plasterboard during installation suspended structures ceilings. The lifting height of such a device can be different, but, as a rule, it is up to 3 m. The load capacity of such a device is about 50 kg, the weight of the lift itself is about 26 kg. With the help of such a device, even very complex work with drywall can be produced alone.

The lifting process itself is very simple, and the movable base of the lifter allows you to move the sheets to the required position for fixing. In addition, spacer lifts can also be used, which greatly speed up the work.

Of the minuses, it is necessary to note the rather high cost of such a device, which often makes its purchase for home repairs simply impractical. In this case, you can make two simple T-shaped metal supports with your own hands (ordinary profile pipe). But such supports still involve the participation of two people in the installation. Therefore, if the volume of all planned work is not very large, then it is best to use special carrying handles. The handle makes it possible not only to transport, but also to lift the plates to the required height.

When working with gypsum boards, it is necessary to take into account not only their significant size, but also their weight, due to which installation alone becomes difficult and often simply impossible. Therefore, it is recommended to use special devices for carrying sheets, which allow you to quickly and easily transport the gypsum board to the required work site, raise them to a certain height. Such equipment can be very diverse, it depends on the requirements for the workflow. They use special carrying handles, frame lifts, spacers and supports, pedal lifts and many other types of devices.

source: //www.vashgipsokarton.ru/montazh/prisposoblenie-dlya-perenoski.html

Drywall is a proven material that over the years of operation has earned a large number of favorable reviews. The scope of its application is huge and does not end with wall cladding or creating partitions. Not only professional builders, but most ordinary people know him firsthand. At the same time, few people know that the storage of drywall must be carried out according to certain rules, the violation of which leads to deformation and damage to the material.

The structure of the material and the principles of its storage

Drywall consists of two components appearing in its name. The gypsum base is covered with a layer of paper, which tightens and prevents it from cracking. Such a structure makes the gypsum sheet (GKL) resistant to severe longitudinal loads. At the same time, its transverse stability remains rather weak. Almost any pressure can lead to the formation of dents or even the appearance of through holes. Due to the large area of the sheet (2400x1200 mm), in the process of moving, its corners often suffer, which break off or go astray. According to building codes, drywall storage rules are based on the following principles:

the storage temperature of the material should not fall below +10 degrees ( optimal values is an interval of 16-18 degrees);
humidity in the premises should be 75-80%;
a room with good working ventilation, which ensures the circulation of air masses of at least 3 cubic meters. m/hour per 1 sq. m area;
a ventilation gap of about 10-15 cm is left between the sheets and the floor surface (to ensure the necessary conditions, the material is laid on wooden slats);
the best option for storing drywall is a horizontal position with 3-4 support points (you should not put more than 15-25 sheets in one pile, because the bottom sheets may burst due to increased load);
the laid sheets are covered with a film designed to protect them from construction debris or other types of pollutants.

Subject to the above conditions, the shelf life of the material is unlimited. At the same time, failure to comply with at least one point can affect the quality of drywall or even lead to its damage. Particular attention must be paid to the level of humidity and the absence of leaks, since the main enemy of the GKL is water.

It is best to store drywall in a room where you can organize everything the necessary conditions for his safety. Storage of material on the street is a temporary measure and is carried out only in the warm season. It is better to place it on the roof or attic, where it will be completely protected from atmospheric precipitation.

Improper storage and transportation features

The consequences of improper storage can be devastating. Violation of air exchange in the room inevitably leads to an increase in humidity. Its increase to 85-90% contributes to the formation of mold or condensation, which destroy the top paper layer of drywall. Non-use polyethylene film leads to a similar effect. Dirt accumulates on the surface of the material, it becomes unprotected from external influences and moisture.

Neglect of laying rules leads to the formation of problems of a different nature. Placing gypsum boards on the floor without creating a backup makes them unprotected from possible water ingress, and also significantly reduces the quality of ventilation of the lower sheets. The absence of the necessary 3-4 points of support leads to deformation and sagging of the surface, which is due to low longitudinal stability and high weight of the material.

Transporting drywall is a potentially dangerous undertaking. The large surface area and its brittleness often cause damage to the material. Sheets must be loaded and transported according to the following rules:

Transportation of several sheets of drywall is carried out exclusively flat using a trolley.
When loading into a car Special attention is given to edges that easily crumble from the slightest blow.
A special platform with 4-5 support points is installed in the car body, on which the material is laid (it is strictly forbidden to carry it in an upright position).
Plasterboard sheets are stacked one on top of the other and carefully aligned with each other.

For transportation of a batch of drywall up to 25-30 units, such norms are more than enough. If they are observed, you can be sure that the material will reach the end point in integrity and safety. At the same time, at the time of its unloading and bringing it to the object, it is necessary to be extremely careful, and having delivered it to the place, all conditions for its high-quality storage should be organized.

Conclusion

Working with drywall has many subtleties and nuances. However, storage and transportation are no less complex tasks, on the implementation of which its quality depends. GKL can be stored exclusively in a room with a certain microclimate. high humidity, incorrect location and neglect of transport standards are the main causes of material deterioration.

No matter how much you love your home, sooner or later there will be a need to change something in it. Over time, even the most quality materials that were used in the construction. Therefore, sooner or later, each of us will have to face this terrible word "repair".

During the repair process, you will certainly need to get acquainted with the range of materials and tools on the market, participate in their purchase, and possibly even in carrying. And if we are talking about a roll of wallpaper, then there will be no problem. But if you planned overhaul and purchased drywall, MDF sheets or other sheet materials, their transportation will cause certain difficulties.

But are there such problems, the solution of which cannot be found? Our online store will help you solve any puzzle. And even carrying bulky materials will not become a problem for you if you buy Gorilla Gripper - a device for carrying sheet materials.

Gorilla Gripper

The Gorilla Gripper is designed to lift, carry or move sheet building materials that simply cannot be carried with bare hands. This tool is used in their activities by professionals: loaders and builders. It greatly facilitates the task and time for transporting the desired material.

Thanks to its special design, the sheet material carrying tool automatically adjusts to any material thickness. Therefore, you can transfer everything with it, from thin sheets metal to MDF boards and drywall.

The gripper for carrying sheet materials is suitable for absolutely any kind of material, regardless of composition and size. The tool clamp is equipped with a soft rubber pad to protect materials from scratches and damage. It is suitable for wood and stone, metal and granite, countertops and wall tiles.

When carrying, you can not be afraid for the integrity of the surface of the material. In addition, the sheet material carrying tool provides a secure grip, completely eliminating the possibility of the sheet falling. This is especially important when working with expensive and fragile materials.

Sheet material carrier

The Gorilla Gripper Plywood Carrying Grip is made from high quality and durable aircraft grade aluminum. This ensures the reliability of the tool. However, the carrying device sheet metal equipped with rubber inserts in the material clamping area. For comfortable use, the handle of the tool also has a rubber pad that prevents chafing and injured hands while carrying heavy loads.

The drywall carrying tool works like a lever and allows you to carry even very heavy loads without much effort. So, you can independently transfer a sheet weighing up to 45 kilograms with one hand, even without serious physical training. Please note that the height of the transferred sheet should not exceed 150 centimeters. In this case, its length can be any.

By using the Gorilla Gripper plywood carrier, experienced movers can avoid professional injury. Such as sprains and bruises of the arms, shoulders and back. Well, if you are new to this business, then you can not do without a tool. Therefore, if in the near future you are planning to renovate your home, we advise you to buy Gorilla Gripper right now in our online store.

Grab for carrying sheet materials

To transfer a sheet of material with Gorilla Gripper, place it in the center of the top of the sheet. Now just lift the tool by the handle. The clamp will automatically adjust to the thickness of the sheet, ensuring a secure fit.

Bend your arm at the elbow and press it to your shoulder. This is the position in which the load will be optimal. You will be surprised how easy and simple you will cope with the task of carrying a bulky and heavy sheet of drywall.

A drywall carrier is indispensable assistant when working with large building materials. It gives you control over the carrying process, improving visibility and eliminating the risk of falling materials.

Now you will not need assistants to cope with the task, which previously would have required several people. You will be able to do everything yourself. Wherever you are, even in Moscow, you can buy Gorilla Gripper without leaving your home. To do this, just place an order in our online store.

Characteristics

Material: aluminum, rubber;
Designed for sheets with a thickness of 0 to 22 mm;
Load capacity: 45 kg.

Equipment

1 x Gorilla Gripper Drywall Carrier.

Carrying handles

Today, a variety of devices are used to carry drywall sheets. All of them differ in their design, size, purpose. But they are united by one thing - the ability to speed up work, ensure the transportation and lifting of drywall sheets to the desired position.

The scheme of the device lift for drywall.

Today, such devices for transporting plates are used, such as:

carrying handles for several sheets;
wall lifts with fixing supports;
lifts for ceiling work;
universal devices for lifting and transportation;
tables and trolleys that allow you to move and lift the plates to the required height;
equipment designed for transportation and performance of certain technological operations such as cutting, making holes and others.

Some types of equipment are not only lifts, but also special spacer frames that allow you to quickly lift the material. Such devices are used in the installation of single-level and complex suspended ceilings, they allow you to fix the position of the plate when they are attached to the profile with screws or for the time required for the special adhesive to dry.

Handles for transporting GKL can only be carried 1-2 sheets.

Most often, a special carrying handle is used to transport drywall sheets, which can take a variety of forms. You can transfer no more than one or two sheets at a time, but this is often enough to ensure a quick installation. The use of such handles is possible only together, that is, a set of two handles is used.

Carrying handles

An example of the use of a three-wheeled trolley and support.

When installing large volumes of drywall, it is recommended to use a device that allows you to move and lift sheets with a large weight. Usually this is a very massive equipment with a load capacity of up to 400 kg. Such carriers serve to transport a package of sheets to the work site, they are used in construction or repair work on a large scale. All GKL sheets are stacked on the edge, have a slight slope. Usually these are three-wheeled carts that are convenient to move around the territory.

There is also a special device with which you can not only maintain the plates in a vertical position, but also fix them if necessary. Such equipment with a stop-lock is considered more reliable and of high quality, while its height can be only 80 cm.

What is the fastest and easiest way to move drywall?

Hassle-free portability

Carrying handles
Tricycle trolleys and supports

Framework lifting mechanisms

When performing repair and repair-related work, GKL is quite actively used, a material that can be called multifunctional. It is used for the construction of partitions, when leveling ceilings and walls, if there is a need to create an original, very beautiful design ceiling of one or more tiers.

Scheme of the GKL sheet device.

Such portable tools for stoves perform the following functions:

Lifting to the required height and fixing in the required position drywall sheets. The most popular are lifting mechanisms that lift the plates horizontally to required height, during the installation of false ceilings.
Carrying gypsum to the place of work with the help of ordinary and most convenient handles.
Hold the free edge during installation, quickly move the sheet and lift it.

When carrying out repair and construction work, drywall is often used, a material that can be called universal.

It is used for the construction of partitions, when leveling walls and ceilings, if necessary, to create an unusual, very attractive ceiling structure of one or more tiers. But GKL sheets are quite heavy, their lifting alone and proper installation is often difficult.

Scheme of the plasterboard device.

Such portable slab tools perform the following functions:

Lifting to the required height and fixing drywall sheets in the required position. The most demanded are lifts that lift the slabs in a horizontal position to the required height when installing suspended ceilings.
Carrying drywall to the place of work with simple and very comfortable handles.
Holding the free edge during installation, quickly moving the sheet and lifting it.

Drywall tips. How to cut, mount, store

Great importance in modern renovation has drywall - a versatile building material that is perfect for the following purposes:

Wall alignment. For this, drywall is most often used. It is very convenient to mount it on the walls, almost anyone can do it, and the surface does not require further processing.
Construction of partitions and other structures. Another significant advantage of drywall is that it is elastic when wet.