A suburban area or a country house is perfect place for recreation and outdoor activities. And how cool after an active summer day on suburban area take an invigorating shower, freshen up and gain strength. But in most cases country houses do not have the benefits of civilization. summer garden shower for a summer residence will help to solve many problems when working in a summer cottage. This is a salvation on a hot summer day, and elementary hygiene procedures after work. After all, every person, having finished work, wants to stand under jets of cool or warm water, take a shower.
Shower for giving is made in different variations and is a team metal structure with water tank, curtain and drip tray.

summer garden shower

It happens different types, heated or unheated, dressing room or not. The frame of the shower has a very convenient design, it is easy to assemble and install in any place convenient for you. Top for summer country shower a tank is installed, which can be heated both from sunlight and from electricity, setting the required temperature, which allows you to enjoy hot water even in rainy weather.

The shower for giving is very easy to operate, does not require special skills when assembling. When disassembled, it does not take up much space, so it can be easily removed to a secluded place or taken with you after the end of the summer season.

With the purchase, you will solve problems with hygiene in the country and provide yourself and your loved ones with a comfortable outdoor recreation!

A country shower with heating and a dressing room is, perhaps, the dream of any lover country rest, after all, after working in the garden, most of all I want to wash and relax under the jets warm water. We will consider design options and tell you how to make a do-it-yourself heated shower in a country house.

Features and varieties

Characteristic differences

Speaking about the country shower, it is worth paying attention to a number of significant features that distinguish it from ordinary bathrooms. These differences determine how to solve technical problems and how to implement specific models and structures in a suburban area.

The most important distinguishing features are:

The shower room is located outside the house on the site and does not have a heating system, thick walls and a roof. That is why this design is called summer;
Even warm shower cannot fully guarantee winter operation. As a rule, such structures allow normal use in conditions of summer and off-season cold snaps, but nothing more;
There is no centralized water supply. Because of this, it is necessary to equip a special tank located above the booth to provide water pressure;
Absent sewer system . This leads to the fact that for the normal operation of the shower, it is necessary to build a sewer and a septic tank for water purification. With a low intensity of use, you can limit yourself to the usual draining of water into the ground;
No centralized supply hot water . This entails the need to build a heating system from the sun or electrical energy. Use of wood, gas and petrol heaters is possible.

Important!
The listed differences determine the features of the construction of a country shower, during which it is necessary to solve a number of technical problems: organize the supply and removal of water, ensure its heating to an acceptable temperature, build a booth.

As a rule, the owners of dachas build showers with their own hands, therefore the methods of their construction take on somewhat peculiar forms characteristic of folk art. We tried to weed out the excess and highlight the most acceptable design options.

Varieties

There are many ways to make a country shower. It can be both simple and unpretentious designs, and real masterpieces of engineering. We will not go to extremes and consider examples of proven and easy-to-implement solutions.

The most common example is country shower cabins with heated water from the sun. Here the heating problem is solved simply: since the shower is summer, the water tank is heated from the sun's rays, for which it is placed on open space above the cabin.

Itself is a barrel made of metal or plastic, any tank of sufficient volume can fit. From the bottom side, a branch pipe with a tap and a shower head is built into the tank. When the faucet is opened, water under its own weight begins to flow down, providing sufficient pressure for a comfortable wash.

The outer walls of the tank are covered with black paint for more intense absorption of infrared radiation from the sun. By lunchtime, the water is already quite warm, and by the end of the day it can warm up quite significantly.

More modern version- this is a tank with a heating element connected to a 220 V network. Today you can find it in construction stores ready-made shower cabins for summer cottages with heating, the price of which ranges from 10,000 rubles and more.

There are also ways to heat water with the help of wood-burning titans, and some craftsmen make a semblance of a gas column from blowtorch and a radiator coil. These are all interesting, but not the most effective options.

During the hot season, simple Summer shower without the "bells and whistles" seems quite comfortable.

But it is worth the sunny weather to change to cloudy - and water procedures turn into torture.

And in the off-season - in spring or autumn - only a trained "walrus" can force himself to go into such a bath.

What about the rest, so to speak, normal people? There is only one way out - to provide heating. After reading this article, you can easily make a do-it-yourself heated shower in the country, in which you can comfortably wash yourself in any weather.

During the design phase, the following questions should be considered:

Tank volume: depends on the number of users. For a quick rinse, 1 person will need at least 15 liters of water.
The volume of the drain pit: the pit should be at least two and a half times the size of the tank.
Frame and skin material: the frame can be assembled from polypropylene pipes, rolled metal or wooden board and bars. For sheathing, use any moisture resistant sheet material: plastic panels, polycarbonate, special plywood. When choosing a material for the first layer of sheathing, there is no need to pursue aesthetics: in order to insulate a heated shower room, it will be pasted over with foam.
Shower dimensions.

As experience has shown, the most comfortable are structures with dimensions of 1.9x1.6 m in plan (shower room + dressing room) and a height of a little more than 2 m.

Site selection

The requirements for a shower room are as follows:

the relief should contribute to the discharge of effluents (we choose a place on a hill);
the cabin should be well lit by the sun;
the location of the bath should be protected from wind or drafts.

Often a shower cabin is made in the form of an extension to the south side of the house. A frame attached to the wall will be more durable, while the bath will be completely closed from the wind on at least one side.

Foundation preparation

At the site of the construction of the cabin, it is necessary to select all the fertile soil, reaching the underlying soil layer - sandy loam or loam.

Next comes the laying of the foundation.

Foundation laying

The building under construction will rest on a foundation of bored piles. Such supports are constructed very easily:

By using garden drill it is necessary to drill a well, the bottom of which is located 30 cm below the freezing depth of the soil. The diameter of the well should be 100 - 150 mm.
At the bottom of the well, a 30-cm sand or gravel-sand pad is made. It needs to be compacted, generously pouring water.
We lower into the well plastic pipe the corresponding diameter. It will simultaneously play the role of formwork and waterproofing for the concrete pile.
Inside the pipe, it is necessary to fix a reinforcing cage of 3 vertical rods with a diameter of 8–12 mm equidistant from each other, connected by crossbars of rods with a diameter of 6 mm. All elements of the frame must be connected with annealed wire - welding is not allowed.
It remains to fill the pile with concrete. At the final stage of pouring into concrete, it is necessary to cast in place the anchor bolt (in the center), on which the grillage beam will be put on.

Foundation for shower

In soft soil, instead of bored piles, you can use driven piles made of steel pipe diameter 60 - 150 mm with a flattened end.

In this case, the anchor bolt for fastening the grillage beam should be welded to the pile.

Drain arrangement

At a distance of at least 3 m from the shower, you should dig drain hole about 2 m deep. It should be borne in mind that the distance between it and the house or other building should be at least 5 m.

If the soil at the construction site does not absorb water well, a well should be drilled at the bottom of the drain pit, which, with its base, would reach a formation with good water absorption.

A polymer pipe must be installed in the finished well, so that its approximately meter section is outside.

Several holes should be drilled in the walls of the pipe at the upper end.

After that, the entire perforation, together with the end hole, is wrapped with geotextile.

There is a type of geotextile that resembles black isospan. In this case, it should not be used, since this material does not pass water well.

At the bottom of the pit and well, a backfill of crushed stone is made. Then it is installed plastic barrel without a bottom or a few tires that have served their purpose. A hole should be made in the wall of this tank, to which the pipe coming from the shower will be connected.

Dacha owners still use their land to a greater extent for growing vegetables and fruits than for recreation. On hot days after hard work I really want to freshen up, so a shower is just a necessity. - consider how to build a frame structure.

How to organize a drain pit from tires, read. How durable is this system, what are its pros and cons.

On hot summer days in the country, it is quite possible to take a cool shower, but if the weather suddenly deteriorates or it just gets colder in the evening, it is not so pleasant to swim under icy water. In this article, how to equip your shower warm water using a heating tank.

Frame erection

On the piles of the foundation, grillage beams should be laid, which at the same time will play a role bottom strapping. Further, with the help of corners and self-tapping screws, racks are attached to them, the upper ends of which are connected by beams of the upper trim.

If the frame is assembled from wood, all elements must be treated twice with a water-polymer composition, then with biocides. The last stage of preparation is the treatment of wood with hot bitumen.

Wooden frame

It should be noted that even with these precautions high humidity will soon lead to the appearance of fungus on the wood. To delay this moment, a wooden shower should be raised above the ground by 200 - 250 mm.

The frame is sheathed with moisture-resistant plywood or plastic, then the walls are pasted over with foam, on top of which colored polycarbonate is fixed. In the upper part of one of the walls in the dressing room and shower room there should be an opening covered with a transparent material.

It would be better if such a window opens in the shower cabin - this will make it possible to quickly dry it after water procedures.

Features of the construction of the heating system, floor

For heating in the washing room, it is necessary to install an old thin-walled radiator connected to a closed circuit with heated water circulating through it.

The movement of water in the circuit is provided by a circulation pump.

In the washing room, instead of the floor, install a purchased shower tray (low version).

It is installed inside a frame assembled from wooden beams.

The floor in the locker room is made in the form of a grid, which is assembled from bars with a section of 40x40 mm or polypropylene pipes. In the latter version, the holes in the pipes should be filled mounting foam so that moisture does not accumulate in their cavity.

Barrel installation

On top of the cab, you can install a tank with an electric heater and a thermostat. Such products are sold today in the widest range.

But this option has significant drawbacks:

A significant part of the heat is spent on "heating the street".
All households, regardless of preferences, will have to wash with water of the same temperature or wait until the water reaches a comfortable temperature after the previous user.

More practical option- attach an inexpensive shower boiler to the wall outside, protecting it with a canopy. An ordinary barrel is placed on top, from which water is supplied through a tee to the mixer and to the boiler. The outlet from the boiler is connected to the second branch pipe of the mixer.

Before you start building a shower room in country house, you need to study a lot of nuances, because when dealing with water, you need to be able to prevent possible leaks and damage to the foundation in advance. - recommendations on the order of construction work.

Making Tips shower tray with your own hands you will find in the article.

Organization of the drain

The best solution is to connect the drain to the gutter. If it is missing, dig a hole not far from the shower stall. Use a hose or pipe to connect the drain hole to the pit.

The platform for the summer shower should be tilted towards the drain pit.

In this case, the used water will flow freely along the inclined pipe.
Equip the bottom of the shower cabin with a tray or make a container for draining water yourself. To do this, fill the area with concrete of the size you need. Place bricks around the perimeter that will serve as a side.

The shower drain cover must be provided with a waterproof cover. The following materials are suitable for this:

ruberoid,
hydrostekloizol,
concrete with the addition of PVA,
PVC film.

It is a mistake to use clay for drainage. Such flooring will wash out with water over time.

How much will it cost is detailed in this article.

How to build a country shower and toilet so that they do not interfere with each other is indicated in detail

shower cabin

Cabin design

The width and depth of the shower cabin must be at least 1 * 1 m, and the height of 2 m and above. The space inside the finished structure should be enough to turn around, raise your arms and bend over without obstacles.

It should also be noted that in the booth there should be a place for a dressing room where water will not penetrate. For the locker room, it will be enough to allocate 60 cm. Thus, optimal size the shower will be 1.6 m * 1 m. The material for the frame can be wooden beam. The standard diameter of the racks for such a structure is 100 * 100 mm.

Various methods can be used to give stability:

Concrete every part of the frame;
Attach the lower corners of the structure to pegs driven deep into the ground.

When designing a shower stall, consider the design of the buildings in your yard. The shower room should not stand out from the general style.

The project of a country bathroom with a shower compartment

Installation

Cut the timber to the length you need. Connect the side parts of the frame in the form of frames. Reinforce each frame in the middle with jumpers from distortions. Jumpers are made from the same beam and should be installed at an angle of 45 degrees.

If you decide to make a shower cubicle with a size of 1.6 * 1 m, then the side parts will be 1 m, the back - 1.6 m, and the front 1 m, since in the front part it is necessary to leave a space for the door equal to 60 cm. For for a convenient passage to the shower room, it is not recommended to make a door less than 60 cm. Then you should connect the frames.

Before fastening the frames together, make sure that their diagonals match.

Having fastened the frames, reinforce them with jumpers at the top and bottom. Thus, you will get a solid frame, which can be closed with polycarbonate or any suitable material. It will be interesting to know that along with a shower, you can also build a toilet, as well as a utility block, but how to do it correctly will help you understand the contents of this

Install the resulting structure over the prepared inclined platform for water drainage. Use building level for aligning the shower cabin frame horizontally and vertically.

Stuff the slats on the bottom jumper. Leave a distance between them so that the water flows down unhindered onto the sloping platform.

For the shower door, make a frame in the same way: assemble a frame from 4 planks of timber and reinforce them with jumpers crosswise to protect the door from distortions. The size of the frame should be approximately 1 cm smaller than the opening for the doors to open freely.

slate,
lining,
moisture resistant OSB,
cellophane,
plastic,
glass.

Please note that any of the materials listed must be opaque.

After choosing the base, cut out the walls right size and install them on the frame frames. The top and bottom of the booth do not need to be closed completely for good ventilation. The door must be cut separately. Install the doors on the hinges and sheathe the door with cellophane so that water does not get on the timber. But, so that it would not be expensive and very simple, it is indicated in the article.

Container for water

The minimum volume of the water tank should be 100 liters, the maximum - 500 liters. The container is installed on the support posts above the shower.

Please note that the material from which the outdoor shower tank is made must not be subject to corrosion.

The best option would be plastic or stainless steel. If you chose the plastic option, you need to not only install it on supports, but also tie it to them. Since in the event of strong gusts of wind, an empty container may fall.

It is best to purchase a flat tank with a fitting thread for screwing in a tap. If this is not found, make a hole for the faucet yourself.

In a plastic barrel, a slot is made using a drill with pen drill. If the water tank is metal, use a metal crown. Having cut the tap into the tank, install a water diffuser on it.

It is good if your container is equipped with a lid, thanks to which the water will not clog. The cover can be made of metal, plastic, glass or cellophane.
Water supply to the tank can be carried out manually or using a pump. The latter option is preferable.

Sources of water heating in the summer shower

The water in the garden shower can be heated in various ways.

Firewood

To increase the temperature of the water in the summer shower with firewood, install a stove next to the cabin. On its surface, place an expansion tank that will push hot water into the main shower tank. The principle of the expansion tank is the constant circulation of water.

Hot water from the heating system will go up, cold water from the tank above the shower will go down. Connection between expansion tank and the main tank will serve as a metal pipe.

With a wood-burning heating system, you need to use a metal container for water, not a plastic one.

The layout of the heating source in the shower in the country

Electricity

Install a boiler or heating element with a power of 2 kW or more in the water tank. If you use a heating element to heat water, it must be inserted into the bottom of the water tank. The boiler is lowered into the tank from above. But be sure to monitor the water level during the heating process. Otherwise, your appliances may burn out.

To prevent a short circuit, the wire stretched from the outlet to the shower must be one-piece.

A thermometer should be installed on the water tank, which will indicate when the heating devices can be turned off. Or purchase a tank with automatic heating, where there is control not only of the temperature, but also of the water level.

A good option for a summer shower with electric heating 2 tanks will be used at once: a large one for cold, a small one for hot water. In this case, each family member will be able to choose for himself comfortable temperature. For mixing hot and cold water get a mixer.

As in the case of heating with wood, it is not recommended to use a plastic tank along with heating devices.

Sun

The most economical and hassle-free heating option is the sun's rays.

In this case, your shower stall should be in a place that the sun heats up all day. If this was not found, decide at what time it will be more comfortable for you to use the shower.

It is more convenient to rinse in the midday heat - which means that the shower stall should be in the place where the rays penetrate in the morning; If you prefer an evening shower, choose an area that receives the sun during the day so that the water has time to warm up.

How to enhance the effect of heating by sunlight?

Paint the water tank black. The sun's rays warm up dark colors the most.
Wrap the shady side of the tank with foil, as this material will keep the heat inside the tank.
With help additional frame pull over an open tank polyethylene film, which will create a greenhouse effect.

Conclusion

An example of organizing a summer shower

After the final installation of the summer shower, you can create a certain style by adding a few details to it. Plant moisture-loving plants around the booth, which will not only please the eye, but also contribute to accelerated drainage. Decorate your shower room with decorative elements to turn an ordinary booth into bright accent your garden area.