How to make a cabinet for a kitchen sink? How to make a sink cabinet with your own hands How to assemble a drawer for a sink

In the process of transformation own kitchen it is necessary to pay maximum attention to the design of the place where the sink is located, because not a single apartment can do without this device and a private house. More stylish interior It will help to create original and multifunctional furniture for the sink, because, in addition to its direct function, it can also serve as a place to store detergents and other accessories. It’s not at all necessary to buy it in a store for a considerable amount of money—it’s quite easy to assemble a cabinet for a kitchen sink with your own hands. Today we will bring to your attention step by step instructions making such furniture that will help you avoid problems in the process of creating it.

Varieties of modern kitchen cabinets with a sink

Before making a sink cabinet with your own hands, it would not be superfluous to consider possible variations, since such furniture today can have a variety of sizes, shapes, and be made from both expensive and inexpensive materials. So, in order not to get confused, let's define the main criteria to which you need to pay attention.

Types of sink cabinets by type of design:

Direct. These are classic rectangular or square models, easily built into any work surface, in addition to corners. In addition, such furniture can be placed on a separate island.

Important! It may have shelves for storing dishes, drawers and even serve as a place to place built-in household appliances.

Angular. Such cabinets are adjacent to two walls of the room, located perpendicular to each other. They can be triangular, rectangular or L-shaped, take up minimal space, and are great for small spaces.

Important! Such cabinets have one big drawback - for comfortable use they need to be equipped additional accessories in the form of carousels, brackets or drawers.

Trapezoidal. These are the most capacious cabinets, having one or several doors and compartments, and they are equipped with a wide tabletop. They allow you to build in a large sink of any shape and place many shelves inside.

As for the shapes of the sinks themselves, much depends on the preferences of buyers. The following models exist:

Oval.
Square.
Rectangular.
Round.
Asymmetrical.

Important! Rectangular sinks are considered the most spacious, in which you can wash not only huge pots, but also large baking sheets.

For additional convenience sinks can be equipped with several compartments, grates, cutting boards, baskets, colanders, even devices for grinding food waste.

Cabinet materials

For the manufacture of kitchen cabinets, laminated chipboard, MDF, and solid wood are used:

The most budget-friendly material is laminated chipboard, which is distinguished by a large selection of colors. The big disadvantage of this material is the threat of release of life-threatening formaldehyde resins.
MDF is the golden mean between quality and price. It is made from wood chips, paraffin, and lignin. Its structure is denser than chipboard and does not evaporate. harmful substances, we hold the fastenings well.
Solid wood is expensive and can dry out or swell when exposed to hot air. Of course, it looks impressive thanks to the unique structure of the wood, but it is difficult to care for.

Shell materials

In order for the entire set to look organic in your kitchen and be comfortable, you need to think about what material is best to choose from for the sink itself. Such variations are possible here.

Stainless steel

This - classic material, which has gained its popularity due to its strength, durability, and hygiene. You can choose an economy or premium sink from it - it all depends on the quality of the seams and the thickness of the sheet.

It is worth noting that such sinks are not scratch-resistant and often develop corrosion stains.

Important! Water hits the metal hard, which can cause some discomfort, but this disadvantage can be compensated for by thickness or sound-absorbing lining.

Ceramics

Cabinets with ceramic sinks look incredibly beautiful and stylish, especially when they are placed near windows, because the sun's rays glinting off the glossy surface of the sinks give them a special elegance.

Sinks are most often made from earthenware or porcelain. Such products do not need special care, it is enough to periodically clean them with ordinary detergents And warm water. They are completely safe and resistant to high temperatures, withstand enormous loads, do not wash out over time, and do not fade. But it must be clarified that they are quite fragile.

Fake diamond

Most available materials Acrylic and liquid stone are considered in this category. Such sinks are made to order along with countertops. But to save money, you can make a mortise or overlay design.

Important! Shells from artificial stone they often crack, dents form on them from boiling water, they change color after contact with chemical and food dyes.

Options for installing kitchen cabinets under the sink

Depending on the material of manufacture and configuration, a do-it-yourself sink cabinet and a sink can be installed in it in several ways.

Each option has its own characteristics, which include the following:

Overhead sinks. This is a classic way of arranging a straight cabinet and a collapsible tabletop. The lid is simply removed from the furniture, and the place for the sink is secured by the edges.

Important! This option is considered the best for self-installation; even a beginner can cope with the installation and connection of communications.

Recessed sinks. This option involves preparing a hole in the countertop of the cabinet for installing a sink. To increase the level of tightness, all joints are sealed with a rubber seal, and the seams are treated with two-component glue.

Important! You can mount such a model on a wooden tabletop with your own hands.

Integrated sinks. They are a single unit with the tabletop due to their perfect fit and tight fit. It is difficult to install such a bowl yourself, since only a person with special skills can achieve a monolithic surface. That is why they are mainly made together with custom-made countertops.

Important! Monolithic models can vary greatly in installation price. Simple options They are held on almost exclusively by glue, which is why they quickly break and cracks form on them. High-quality professional installation – maximum match.

How to make your own sink cabinet?

We begin to make a cabinet for a sink with our own hands by preparing all the necessary tools and materials, which include:

Thick glass.
Door hinges.
Furniture corners.
Putty.
Self-tapping screws.
Screws.
Primer.
Hacksaw or electric jigsaw.
Double-sided tape.
Hexagon.
Screwdrivers.
Sandpaper.
Putty knife.
Brush with soft bristles.
Pencil or marker.
Glass cutter.
Sand.
Drill.
Roulette and ruler.
Grinding wheel.
Protective gloves.

Make a vanity cabinet according to the following diagram:

First of all, decide on the size of the furniture, while taking into account the parameters of the sink itself, the height at which you want to install it, and the dimensions of the kitchen.
Based on the data obtained, prepare a drawing of the sink cabinet, be sure to indicate in it what it will consist of, the dimensions of the sink and the height of its installation.
Use a pencil to mark the chipboard.
Cut out all the pieces.
First of all, connect the bottom and walls using self-tapping screws. Make sure that the heads of the fastening elements do not protrude too much; they should be slightly recessed into the chipboard.
Place the assembled cabinet against the wall, make sure it stands level and does not wobble. To increase its rigidity, you should use furniture corners; it is better to place them using short screws directly under the tabletop.
To make the surface of the cabinet perfectly smooth, treat it with putty using a spatula. Leave it to dry for a while, then sand it sandpaper.
Prime the entire surface of the product. This layer should be as thin as possible, then wait for it to dry.
Using tinted varnish and a brush, cover the structure in several layers.
Install a cabinet under the sink.
Make a door out of glass. First mark the glass so that it becomes the required form. Use sand to give it a matte finish. Just sprinkle it on the glass piece and lightly moisten it. Place another piece of glass on top and rub the sand.
Attach the finished door to the bedside table using hinges and adjust it.

To make a kitchen sink cabinet with your own hands, you will need materials, tools, and skills in working with wood and plumbing. Arranging this element kitchen set independently, you can give the product any shape and appearance.

Choosing a sink - type, shape, material

You will need the following tools:

jigsaw or circular saw;
drill;
screwdriver;
self-tapping screws or confirmations;
loops;
furniture corners;
hexagon;
pencil and ruler;
drills of different diameters;
sandpaper.

If the sink is ceramic, you will need to make the cabinet manually milling machine.

Manufacturing and assembly stages

First you need to transfer the dimensions of the parts of the cabinet under the sink to chipboard or MDF. If the elements will be cut out using a jigsaw, you need to choose a thin saw and set the speed to high. This will avoid chipping. A circular saw allows you to achieve high cutting accuracy.

If the sink is round, you should transfer its dimensions to the countertop and make an opening. To do this, drill a small hole in the chipboard into which a jigsaw is inserted. Then a hole of the required size is cut around the circumference.

After this, the doors are made, side walls, bottom and bar. When all the elements of the cabinet are ready, small diameter holes are drilled at the joints. They act as guides for self-tapping screws or confirmations.

Manufacturing of parts

Since most parts are rectangular, cut better with a jigsaw. Here the question arises of how to make a cabinet for a sink if there is no such tool. In this case, you can use a hacksaw. After cutting, it is important to check the dimensions of the finished parts again. If necessary, they are adjusted. The edges should be sanded. When all the parts are ready, glue on the edge.

Frame assembly

After manufacturing the elements, the assembly of the structure begins. To make a cabinet for a sink, you must first assemble the frame. To do this, connect the sides of the cabinet and the bottom using corners and screws. Using corners, the elements are installed at 90° relative to each other.

Then holes are made with a small diameter drill at the joints. After this, the parts are fastened together, checking with a corner to see if any distortion has occurred. After assembling the walls of the cabinet, they begin to install the shelves and crossbars. The doors are hung after installing the sink. If the design of the cabinet includes special legs, they are attached to the bottom after assembling the frame.

Hanging doors

Before installing the doors, they are applied to the cabinet to mark the places where the hinges are attached. First, holes for the cups are drilled with a crown. If you don't have a Forstner drill, you can use a router. The strike plate is installed after installing the hinge on the door. Finally, the door is leveled and adjusted in height and depth using special screws. After collecting all the structural elements, they begin to install the cabinet. Then connect the sink to the water supply and sewerage system.

Making a countertop

The dimensions and shape of the countertop are selected taking into account the dimensions of the kitchen, the location of the table, and the relationship with other furniture. The standard width is 60 cm, the thickness does not exceed 5 cm, and the length is consistent with the kitchen set. Most simple table top made from chipboard, which is lined with plastic.

The chipboard sheet is cut along pre-marked lines with a jigsaw. If the tabletop is made of two parts, they are connected to each other with screws or using a construction stapler.

The material can be lined with plastic, which is glued polyester resin. If laminated chipboard is used, then after connecting all the elements of the tabletop, the ends are covered with an edge.

Sink installation

When the frame for the kitchen sink is made with your own hands, the sink is installed. Installation options will depend on design features sinks The standard version is fixed in two ways:

sealant;
self-tapping screws.

Installing a sink in the kitchen - do it yourself, reliably and firmly

One of the indispensable attributes of any kitchen is the sink. It is required to the same extent as a stove (gas or electric). But installing a sink in the kitchen with your own hands is much easier than connecting a stove, if you know the basic instructions and the typical secrets of such work.

Different sinks are needed, different sinks are important
How to assemble a kitchen sink - install a cabinet
How to install an overhead sink on a cabinet - brief instructions
Installing a sink in the kitchen - do-it-yourself mortise installation

Indeed, kitchen sinks are produced in a wide range of products, which can make your eyes wide open in a specialized plumbing store. Kitchen sinks can be divided into at least six categories:

Wall-mounted, mortise and overhead sinks. Mounted option is now rare, it is more relevant for communal apartments and government institutions than for modern renovation. But inset and overmount sinks compete with each other in popularity; their long-term reliability and aesthetic appeal are comparable;
Sinks made of stainless steel alloys, chrome-plated or nickel-plated, sinks made of natural granite or porcelain stoneware, artificial stone, acrylic and even glass (!). However, due to practicality, 90% of all models are made of stainless steel and representative porcelain stoneware;
Sinks are angular and standard, round, oval, square, rectangular and shaped. The more intricate the shape of the sink, the more difficult it is to give it impeccable cleanliness and maintain a sparkling shine on a daily basis. After all, the sink is used not for beauty in the living room, but for mundane household needs in the kitchen;
By design, a distinction is made between ordinary single sinks and sinks with two bowls (one or different sizes, the same or various shapes etc.). There are convenient models with water overflow from one bowl to another;
According to the location of the mixer - on the wall or on the sink itself (the first option is rare);
According to the availability of additional options - the possibility of installing a water filter, outlets for connecting washing machine, automatic valves for adjusting drainage, additional taps for connecting garden hoses, etc.

Shells from of stainless steel have gained overwhelming popularity due to their reasonable price, durable functionality, compatibility with a wide variety of kitchen renovations and ease of sanitization.

You can check the quality of the steel alloy of the sink right in the store - an ordinary flat magnet will stick to it very firmly, but with bad steel the magnet will “fly off” at the slightest vibration.

Granite and steel sinks are available in overhead and inset versions; installing a sink in the kitchen with your own hands is possible for both. However, first we need to take care of the furniture base of our installation efforts.

2 How to assemble a sink in the kitchen - installing a cabinet

Recessed and overhead sinks are installed in cabinets and cabinets, with opening (less often sliding) doors in the front and an empty opening in the back. The assembly of these elements of the kitchen set has its own characteristics. The fact is that they do not have internal bulkheads; they can interfere with the connection of the sewerage system and water pipes. This means that there will be no additional stiffeners inside the cabinet. If a countertop sink is installed, even the countertop is missing; it is replaced by a steel sink panel.

The assembly of the sink cabinet should be much more reliable and durable than other parts of the kitchen set. It needs to be installed on special supports, because... Even with the best sealing, water leaks are possible. It wouldn’t hurt to treat the material itself with water-repellent compounds. Inside the bedside table, it is necessary to provide fastenings for tightening jumpers - they are installed after connecting the sink to the communications for the strength of the entire structure. The lintels themselves can be made from flat and thick planks, which will serve as additional mini-shelves inside the cabinet.

3 How to install an overhead sink on a cabinet - brief instructions

Overhead installation option kitchen sink It can be ordinary or “sliding”. In the latter case, the sink itself is equipped with curved slides on the side and front side, there are special grooves on the bedside table. After you have successfully assembled a sink in the kitchen, all that remains is to slide the sink into these grooves, move the structure to the wall - and you can connect the communications.

If you use a direct overhead mounting option, you will have to seal all joints. High-quality waterproof sealant combines the properties of glue and a protective waterproof composition. The upper perimeter of the open cabinet is generously coated with this composition; all that remains is to precisely place the sink itself on top.

A large and heavy overhead sink cannot be installed using sealing adhesive alone!

Otherwise, one day it will fall inside the cabinet along with the dishes, destroying the sewer and breaking off the pressure water hoses. Negative impressions from such an accident will be available to both you and your neighbors below. As well as eliminating the plumbing collapse and renovating two rooms from the personal budget. How to install an overhead sink on a cabinet without the risk of such an incident? Using auxiliary bars or internal sheathing.

Simple overhead sinks are usually equipped with additional fasteners. Massive bars, precisely screwed with wrong side cabinets. It is necessary to accurately mark the bottom edge of the pre-installed (without glue!) sink and build an internal sheathing along this line. Then the sink will rest on auxiliary bars, and not on the thin end of the bedside table. The operation is similar to hidden installation of sheathing. only in the final stage is it supplemented with adhesive sealing of the joint between metal and wood.

4 Installing a sink in the kitchen - do-it-yourself mortise installation

Before attaching a metal sink to the cabinet using the mortise method, you need to make sure that the cabinet is strong and that the entire structure can be accurately installed in the installation opening. Experiment with moving the cabinet in advance - after fixing the sink you will only have to do this once. After connecting the sewerage and water supply, the cabinet with the sink should stand like a glove, without distortions or vibrations.

How to install a sink in the kitchen with your own hands - step-by-step diagram

Step 1: Marking

Most mortise sinks are sold with a ready-made template; it acts as a packaging container. It is enough to cut out such a template from cardboard and attach it to the countertop at the location of the sink - and the outline seat ready.

If there is no template, you will have to make it yourself. To do this, it is better to use thick cardboard (for example, from a TV or monitor). Having measured inner part sinks, transfer this size to the cardboard surface and cut off a few centimeters more. It is better to cut a piece of cardboard several times than to look for a new piece.

Step 2: Location

The proverb about the need to measure seven times before the first cut is very relevant for our work. You can move the finished template around the tabletop easily and freely - until you start sawing right through it. So consider how the tap will open, where the filter will be, how kitchen utensils will be positioned, etc.

The cardboard template should be traced as evenly and accurately as possible. To do this, attach it to the tabletop with ordinary tape and draw one thin line with a pencil. After which the “cardboard assistant” peels off and goes into waste paper; we will no longer need it. We cover the perimeter of the future hole from the outside with masking tape for 8-12 cm in order to prevent it from being damaged by mechanical tools.

Step 3: Drill and saw

Yes, yes, the first mechanical tool will be a drill, not a saw. A drill with a diameter of 2 mm is selected and several closely spaced holes are drilled in the place where it is convenient to start cutting out the contour. The holes are connected into a single groove using a chisel.

It is convenient to saw the tabletop with a wood jigsaw. Just don’t forget to stock up on extra blades - thick tabletops are difficult to saw, and the blade is likely to break if it deviates slightly from the vertical. Take your time and move the jigsaw confidently - it is more difficult to correct a crooked cut than to immediately cut a hole along a plumb line, with a strictly perpendicular cut.

Step 4: Complete the installation

On the end of fresh mounting hole Apply sealant and insert the sink tightly. We hold the sink under load for 10 to 60 seconds (depending on the type of sealing compound). Carefully remove excess glue from the outer and inside sinks and wait several hours until the sealant completely hardens. We connect hoses, pipes, sewerage, install a faucet and use the new sink for your pleasure.

Today we will show you how to use MDF boards and mosaics to make an attractive vanity unit that can be installed in the bathroom or kitchen.

For this you will need the following materials:

universal glue (latex based), it is moisture resistant;

First you need to make a template from a piece of paper.

Options for kitchen cabinets under the sink, their pros and cons

To make it easier, place the shell on paper and trace its outline.

Using a paper sample, mark the slab of the required size.

Then, using a drill, drill four holes. They are necessary in order to cut an opening under the sink with a jigsaw.

For reliability, it is better to use two MDF boards.

Before installing them together with the sink in place, it is necessary to make a hole in the cabinet for communications.

Now you can install the finished surface using corner fastenings and self-tapping screws. This part of the work can be entrusted to men, but the next stage can be done by women.

All that remains is to cover the surface with mosaic tiles.

Apply it in small sections, as the glue hardens quickly (10-15 minutes).

A few more touches.

And this is what the mosaic looks like after grouting.

Reference

MDF boards are made from fine wood chips by dry pressing at high temperature and pressure.

They are distinguished by the fact that during the production process they are given special properties, such as water resistance, biostability and fire resistance.

Fiberboards began to be produced in America in 1966. In 1997, the production process was established in Russia. But the main global producer at present is, of course, China.

MDF boards are an inexpensive and easily processed material. They have a homogeneous structure that lends itself well to processing, which is why they are recommended to be used in the manufacture of elements for bathrooms and kitchens.

Prices are rising every day, and now, in order to renovate the kitchen and update the kitchen set, you will have to invest heavily. However, you can save money, not only on repairs yourself, but also on kitchen furniture.

Today we will look at how to make a cabinet for a sink with your own hands as cheaply as possible.

The sink is one of the main elements in the kitchen. If you decide to assemble the kitchen set yourself, then this element must be prepared first.

According to our design, the width of the sink cabinet in the kitchen is 75 cm. The doors will open as standard, i.e. We will install them on hinges, not on rollers.

The project assumes that a single tabletop will be installed along the entire length of the kitchen unit, which is why the upper part of the cabinet is not manufactured. At the same time, we will buy doors and the front part of the shelf to speed up the process and make the cabinet under the kitchen sink more attractive. However, a cabinet for a sink can be assembled cheaper if you make these elements yourself. But at the same time you will have to seriously work on your appearance. We will consider these points separately below in the text.

Below is the drawing kitchen cabinet under the sink with the specified dimensions of width, length and height, which are 75, 60 and 87 cm, respectively.

In order to assemble a cabinet for a sink with your own hands, we will need the following tools:

Tape measure, pencil
Screwdriver or cross-head screwdriver
Screws
Drill
Sandpaper
Paint brushes (if you will be painting the cabinet under the sink)

Also, in the process of assembling a cabinet for a kitchen sink, the following materials will be required:

Back panel pressboard
Plywood sheet for crossbars
Sheet Chipboard thickness from 12 mm (optional with cladding) for side walls
Facing tape to match the color of the chipboard cladding
2 doors (if you don’t make it yourself)
Front panel for the top shelf (if you don’t make it yourself)
Guides and rollers for the top shelf
Handle for top shelf and 2 door handles
4 hinges for installing doors
Wood paint (in case of using chipboard without cladding)

So, let's look at how to assemble a cabinet for a sink with your own hands.

The first step in assembling a cabinet for a sink with your own hands in the kitchen is preparing the side walls.

As a material for the manufacture of these elements, you can choose a chipboard, preferably lined on one side. Choose the color and texture of the cladding to suit your taste. In our project we will use a white silver chipboard and a matching color facing tape.

Chipboard with cladding

If, however, you decide to use a chipboard without cladding to save money, then you will need to think about color scheme for the future cabinet under the kitchen sink and stock up on paint.

Chipboard without cladding

The dimensions of the side walls should be 87 by 60 cm. Moreover, in the lower part of the front walls it is necessary to cut a rectangle measuring 6 by 11 cm.

If in your kitchen there is installed along the wall along which the kitchen set will be located floor plinth, then it is recommended to cut the prepared side walls at an angle to ensure a tight fit of the cabinet under the sink to the wall.

The second step is to attach the crossbars to the prepared side walls.

For crossbars, you can take ordinary plywood with a width of at least 12 cm. There is no point in heavily processing and preparing these crossbars, since they will not be visible and hidden from view.

There are two ways to fasten the crossbars and walls.

The first method is to use steel corners for furniture - two for each joint plane. The second is to screw the screws directly into the crossbar, but in this case you will have to use thicker plywood or even a chipboard as a crossbar.

At the same time, to hide the caps of the fasteners, you will need linings to match the color of the walls.

The third step in assembling a do-it-yourself sink cabinet for the kitchen is attaching the lower base. It is best to choose the same material as for the side walls, i.e. Chipboard board. From it you need to cut a rectangle measuring 70 by 50 cm. It is best to secure the lower base by screwing the screws directly into the crossbars fixed at the previous stage.

At the same time, for ease of use of the cabinet under the sink, the caps should be recessed below the surface by drilling a small recess for them, which after installation should be covered with wooden filler.

The fourth step, one of the last in assembling a cabinet for a sink with your own hands, is to attach the upper crossbars to secure the upper part of the cabinet for a sink.

The first crossbar will be positioned vertically and fastened so as not to protrude beyond the perimeter of the cabinet under the sink. It is to this cross member that the back wall will be attached. The second cross member will be located, on the contrary, horizontally. Just like in the second step, we recommend using chipboard rather than plywood for the crossbar for ease of installation. The thickness of the slab will allow you to fasten the elements of the kitchen cabinet without the use of additional fasteners.

If the chipboard panels were chosen without cladding, then it’s time to paint all the elements of the cabinet.

The fifth step in assembling a cabinet for a kitchen sink is fixation back wall locker

This wall will not perform any functions other than visual isolation of the cabinet and will not bear the load. In this regard, pressed cardboard can be chosen as the material for this element. In addition, in such a wall it will be easier to cut holes for connecting communications.

The sixth step is to separately assemble the front frame. The dimensions of the top shelf and doors can be arbitrary depending on personal preferences. The dimensions selected for this project are shown in the drawing below.

The remaining unclosed ends of the side walls made of chipboard boards in the lower part of the cabinet should be sealed with end plastic tape using an iron.

The seventh step is to install the top shelf on casters.

We will not consider the shelf assembly process in this article due to the same type of process for all products; the main thing is to take into account the actual dimensions. You can either make the front panel of the shelf yourself, but then it will be quite simple, or you can order it from a company with a more interesting profile, like the doors.

The eighth step is attaching the cabinet doors under the sink.

We choose the pattern, profile, texture and color of the doors according to your taste. In our project, we chose simple doors with a rectangular interior. Such doors can even be bought in an online store, and are most often called “Facade to body”. If desired, you can even choose doors with grooved glass. It all depends on your taste and budget.

The hinges determine how wide the doors will open and whether they will warp. Hinges vary in opening angle and installation principle, and there are even models with closers. The choice of loops is a topic for a separate article.

AND The final stage– bring appearance the resulting do-it-yourself sink cabinet in the kitchen to a decent level.

The handles should be screwed to the doors and the front panel of the top shelf.

In our project, we attach not one, but two handles to the shelf. Moreover, we select the color of the handles in contrast to the color of the cabinet itself under the sink.
So, here we look at how to assemble a cabinet for a sink with your own hands. Now that other elements of the kitchen set are ready, it will be possible to install a single countertop and sink.

DIY bedside table - easy to make and practical

A bedside table is a diverse concept. This can be a bedside container for newspapers and a tea mug, or a stand for a huge TV with built-in speakers and an electronic rotating system to attract the viewer's attention.

Such a simple concept - and an endless number of execution options. Making a bedside table with your own hands is quite simple, but it is important to decide necessary design. My friend needed a kitchen cabinet with one top drawer.

If you please.

Appearance of the manufactured bedside table

To make a bedside table you need

Here I give a list of tools that it would be better for everyone to keep in constant readiness, along with a fishing rod, favorite gun and chess:

Drill-driver.
A battery-powered one would be optimal if the household also has a hammer drill.
Set of drills. In this case - on wood.
Set of bits. If you want to assemble the furniture yourself, the kit should include a bit, which is a hexagon for confirmations.
Hinge cutter 35 mm in diameter.
Iron.
Roulette.
Pencil.
A carpenter's tool called a "right angle", with a measuring ruler.
Sandpaper, dry rag.

I’ll immediately note about the iron and other objects that were not clear at first.

Since you will be forced to order cutting on the side (a chipboard sheet measuring 1830x2440 mm is the smallest), it makes sense to save on gluing the edges. Now on sale is a 0.5 mm thick melamine edge in the color of the material, which is easy to glue on yourself. Since it has an adhesive base, just attach it to the desired end with the beautiful side up and iron it with a heated iron.

Using a dry cloth, press the still hot edge to achieve good adhesion. Excess edges are removed with a dull knife and the edges are processed with sandpaper.

Detailing the bedside table

A cabinet made with your own hands may differ in content, functionality and appearance.

This largely depends on the amount you are willing to spend on fittings. Here I am writing details of the simplest and cheapest cabinet. Drawer without runners, facades - laminated chipboard.

772x500 – 2 pcs., sides of the cabinet.
368x500 – 2 pcs., bottom and shelf.
368x100 – 3 pcs., base and two upper strips.
480x110 – 2 pcs., drawer sides.
334x110 – 2 pcs., box front and back walls.
150x395 – drawer front.
515x395 – cabinet door.

All dimensions are for chipboard with a thickness of 16 mm.

We take a special kitchen tabletop, 28 mm thick.

Its size is 525x400 mm.

Fiberboard for the back wall of the cabinet and the bottom of the drawer:

670x395 mm – rear wall.
475x365 mm – bottom of the box.

I have already written how to glue the edge, now it’s time to prepare the parts for assembly. The main fasteners for us are confirmations, for which we need to drill holes. We drill into the plane with a diameter of 8 mm, into the end of the parts - with a diameter of 5 mm.

The figure shows which parts are drilled into the end, and which into the plane - simply based on general design cabinets.

Nightstand assembly diagram

List of required accessories

A do-it-yourself bedside table is also our business card to everyone who doubted our abilities, so even in an inexpensive version, fasteners need to be taken as seriously as possible.

We buy from a furniture fittings store:

Confirmats 5x70 – 22 pieces. It is enough to screw the tie strips and the plinth one confirmat on each side.
Self-tapping screws 4x30 – packaging. They will come in handy for other jobs around the house, but specifically here they are needed in order to screw the tabletop to top bars, and the front of the box - to the front wall of the box box.
All this is screwed up from the inside.
Self-tapping screws 4x16 – packaging. This is a fastener for hinges and hardboard (fibreboard). You should buy it with a hidden cap, and also deepen it into the bottom of the drawer so as not to scratch the shelf.
Furniture hinges – 2 pcs.
Which sink cabinet to choose?

Since our cutter is 35 mm in diameter, we buy the corresponding hinges.
Furniture handles – 2 pcs. For the front of the drawer, it is better to buy additional screws for handles, 35 mm long.

Assembly diagram of our cabinet drawer

Making a bedside table

It is better to coordinate the production of bedside tables of this model with friends or acquaintances - simply because chipboard sheet you can make two and a half of them.

Assembly is so simple that you can start selling “extra” cabinets. To fully satisfy potential customers and your own, screw furniture legs, the so-called “hooves,” onto the bottom sides of the furniture.

They will help you position the cabinet on an uneven floor. Adjustable legs of this type can also be found in specialized stores that sell furniture fittings.

Ready bedside table

In general terms, we have already understood how to make a bedside table with our own hands - it remains to take into account two very important technical points.

Sampling for loops. One constant should be remembered: The distance from the edge of the facade to the center of the hinge hole is always 22 mm.
Naturally, for hinges with a seat size of 35 mm. Above and below the door it is usually marked at a level of 60-80 mm - this is not critical if there are no design features. Then you can simply attach the facade with screwed hinges to the sidewall at the desired height and secure it to the body.
Right angles.
When assembling a drawer or cabinet box, always check the geometric correctness of the resulting parallelepiped. Otherwise, the product will turn out to be lopsided and with poorly opening facades.

That's all, good luck with your work.

You can use steel pipe to make a solid base under the sink that will last longer. The stand is especially suitable for summer cottages.
A stand under the washbasin can also be purchased at the store. However, there are practically no steel structures.

Wooden and ceramic sinks are not suitable in some cases. Steel structure Can be easily used in suburban areas, indoors utilities and in production.

Advantages and disadvantages of steel drains

Steel under sinks, well protected from moisture, can withstand a very long time. They are resistant to high temperatures and adverse external conditions. For example, such laundering cannot be destroyed by chemicals.

The stand can be made from old pipes, especially if the craftsman has no special requirements for the aesthetic component.

The equipment can be placed under the sink from steel pipes. During sanitation of sanitary equipment, this design will not cause problems. Removing this product is very easy.

The downside to steel gutters is that they often don't look as nice as ceramic or wood ones.

Of course, a trained craftsman can make it attractive, with extra finishing.

Hull under the flow of your hand. 6 options.

Wood, as well as plywood and particle boards, are suitable for finishing the frame. If necessary, you can use steel sheets.

List and materials

To make a steel washbasin, you will need:

— pipes are cut to the dimensions indicated in the drawing;
— welding;
- bend;
— paints and other protective compounds.

Sink installation

The sink is assembled in several stages.

Firstly, you must take preliminary measurements to buy required amount pipes Measure the height of the frame and its dimensions. To accurately determine the volume of the stand, the craftsman must have a sink that will be mounted on the frame.

The height of the frame is determined individually.

Usually it is 70 - 85 cm. This optimal height for an adult. If the skeleton is lower or higher, the use of a washbasin is inappropriate. The leader must also maintain the position of the mixer.

One thing to keep in mind is that the water does not fall to the ground and the flow from the faucet does not cause splashing.

Once the measurements are taken, it's time for the pipes. You can buy pipes already cut to the specified sizes. Suitable for stainless steel pipes. It is better to make the top of the abyss a single figure. This means that the hose is not cut, but rather bent using a pipe bender. This will make the frame look much better. After purchasing the hose, you must first wrap the top of the frame and weld that part of the foot onto the stand.

If you just weld the legs together but don't connect your bottom ends, the stand will be unstable.

It may even break with occasional falls. Therefore, the lower parts of the frame must also be connected to the pipes. Now the worst work is over and you can start cosmetic decoration. The stitch must be finished and the design must be colored.

If necessary, you can further complete the structure. For example, a steel frame can protect elements for fastening wooden sheets.

The most economical material would be chipboard. These sheets are cheap and durable. Drywall will not work in this case because it is too sensitive to moisture. Steel plates can be welded to the sink directly on the frame. We must not forget the door and consider the possibilities of access to the pipe.

In the production of washbasins, the stand is usually not subjected to special coatings other than painting.

In a commercial environment decorative finishing doesn't last long. You can come up with a more attractive option for doing laundry at home.

It is impossible to imagine a stylish, modern bathroom without a cabinet under the washbasin, which hides communications, expands functionality, and ennobles the interior. Many people buy this item, but there is an opportunity to make it yourself. Then a logical question arises: “How to make a cabinet under the sink yourself?”

The bathroom space is not always up to standard, so it is not so easy to fit all the necessary items

The bathroom space is not always up to standard, so it is not so easy to fit all the necessary items. Choose furniture among ready-made options By custom sizes not easy. Trying to cram in what you managed to acquire is stupid. Any non-standard situation requires an extraordinary solution. It is impossible to do without targeted furniture manufacturing.

Ordering individual execution of items from professionals is not affordable for everyone.

Making a bathroom vanity with your own hands is not difficult.

Ordering individual execution of items from professionals is not affordable for everyone. In addition, workshops are often loaded with orders; you will have to wait quite a long time for your small bedside table. In this case, a DIY sink cabinet will be the optimal solution. You will be able to save time and money.

In this case, a DIY sink cabinet will be the optimal solution.

The main thing is the desire to achieve results, accuracy, and possession of basic skills in working with tools and selected materials.

Get busy hand made bedside tables are for those who have the skills to work with furniture. Get original item, create unique interior always a pleasure. Moreover, decorating a sink with your own hands is not particularly difficult.

Making your own bedside table is worth it to those who have the skills to work with furniture.

If the sink is mortise, you need to make a hole on the top wall of the future cabinet.

How to decide on the parameters of a cabinet

There are many options for making a bathroom vanity. It is advisable to select parameters based on financial capabilities, the intended functions of the item, style, dimensions of the bathroom, and personal preferences of the owners. Main selection criteria: type (location of the cabinet, option for installing the bowl), material from which it is made.

It’s always a pleasure to receive an original item and create a unique interior.

To make a bathroom vanity cabinet with your own hands, you will need tools.

Types of sink cabinets

Depending on the location, the cabinets are divided into:

hanging;
floor;
corner.

There are many options for making a bathroom vanity.

Finally, the product can be decorated using self-adhesive film, enamel, varnish, veneer.

Hanging models look light and do not burden the interior with dimensions. This design is applicable in any situation, even when the location of the plumbing ducts does not allow the installation of large floor furniture options. Hanging cabinets require walls to meet increased strength requirements. Installation is more difficult than floor structures. When choosing, you will need to take into account the weight of the product and future contents. Hanging versions do not require storing heavy objects. Such cabinets are not afraid of puddles on the floor. Subject to operating conditions (avoiding overuse), they last a long time.

It is advisable to select parameters based on financial capabilities, expected functions of the item, style, dimensions of the bathroom, personal preferences of the owners

Floor variations are especially popular. They are stable and allow you to store quite heavy items (washing powder, household chemicals). Bedside tables are made on legs and monolithic plinths. To ensure better stability and safety, additional fixation of the cabinet to the wall is allowed. The versatility of the item makes it in demand.

Hanging models look light and do not burden the interior with dimensions.

Depending on the method of attaching the sink, it is necessary to make a countertop: an overhead sink or a panel with a hole for the washbasin.

Corner models characterize the location of the cabinet. They are made suspended or floor-mounted. Corner models do not “eat up” a lot of space by occupying space that is poorly used in any interior. The use of corner cabinets is preferable for small spaces. The nature of the location makes it possible to profitably use valuable square meters. The spacious shelves of the corner bedside table can significantly expand the possibilities of the storage system in the bathroom.

When choosing, you will need to take into account the weight of the product and future contents.

Based on the method of installing the sink, cabinets are divided into the following types.

Washbasin type	a brief description of
Consolidated	Consolidated modifications of washbasins are manufactured connected to the body of the cabinet. In most cases, it is impossible to make such a model with your own hands. The tabletop, which is an inseparable part of the bedside table, initially contains the washbasin.
Overhead	It is easiest to make cabinets with an overhead type of sink mounting yourself. The bowl is placed on top of the furniture box instead of the tabletop, secured, and sealed if necessary.
Mortise	Cabinets with a mortise method of installing a sink with self-production will require skill. The bowl is placed in a hole cut out for it on the top wall of the furniture section. The opening must exactly match the parameters of the sink, otherwise the finished cabinet can simply be ruined.

Subject to operating conditions, they last a long time.

Materials suitable for vanity cabinets

In the bathroom it is permissible to use:

natural wood;
glass;
plastic;
drywall.

Floor variations are especially popular.

The tree is used protected moisture-resistant coatings. He is easy to work with. The finished product is durable and looks stylish, but the price forces you to look for alternatives. One of them is MDF, which initially prevents excessive moisture penetration.

To create the necessary strength finished product you will have to take care of strengthening the structure.

Glass is rarely used for furniture making; working with it will require skills. Special reinforced options are used to ensure structural strength. A product made according to all the rules will become a source of pride and will delight you with its practicality.

Waterproof modifications are perfect for the bathroom, but their fragility will require modifications to the design.

Plastic - great option for the bathroom. He has a full set of necessary qualities. Working with it yourself will not cause much trouble. To create the necessary strength of the finished product, you will have to take care of reinforcing the structure. The same goes for drywall. Waterproof modifications are perfect for the bathroom, but their fragility will require modifications to the design.

Stylish, unusual product obtained by combining several materials.

A stylish, unusual product can be created by combining several materials. At the same time, it is possible to achieve the optimal combination of practicality, efficiency, and unique appearance.

Plastic is a great option for the bathroom

Manufacturing process

Before starting the main work, you should select necessary tool, materials, components of the future structure. To make a bathroom vanity cabinet with your own hands, you will need:

hacksaw;
drill;
screwdriver;
jigsaw;
hammer;
screwdriver;
pliers;
machine (skin) for grinding;
pencil;
roulette;
chisel.

Wood is used protected by moisture-resistant coatings.

To work you also need:

parts made according to drawings from the selected material;
screws, corners for fastening;
accessories ( door hinges, pens).

The lifespan of a DIY sink cabinet depends not only on the quality of the work performed, but also on the material used.

Progress

If the sink is mortise, you need to make a hole on the top wall of the future cabinet. To do this, a pattern corresponding to the diameter of the sink is made, placed on the surface, and a slot is cut along its contours. Using a drill, a hole is made, a jigsaw is inserted into it and the contour cut is completed.
It is necessary to assemble a frame from parts prepared in advance. All elements are pre-treated with moisture-protective agents: the sections are sanded and primed.
The side walls are attached to the finished frame using self-tapping screws or glue. Corners will be required at the connection points to the frame.
Depending on the method of attaching the sink, it is necessary to make a countertop: an overhead sink or a panel with a hole for the washbasin. The seams are carefully sealed.
Installation is underway internal filling(shelves, drawers), fittings (handles, hinges), doors, bottoms, legs (if any).
The mortise sink is placed in the hole. Connect communications. All seams are sealed with silicone.
The finished cabinet in the bathroom is installed in place and secured if necessary. Finally, the product can be decorated using self-adhesive film, enamel, varnish, or veneer.

The nature of the location allows for profitable use of valuable square meters.

Making a bathroom vanity with your own hands is not difficult. The main thing is the desire to achieve results, accuracy, and possession of basic skills in working with tools and selected materials.

To ensure better stability and safety, additional fixation of the cabinet to the wall is allowed.

VIDEO: Do-It-Yourself Washbasin Cabinet with Chipboard

Unfortunately, the realities of life for the average resident of Russia are such that kitchens in most houses, and especially apartments, are of modest size. They are more or less able to satisfy the needs of a not too spoiled family.

Design of a small kitchen with a sink by the window

If standard furniture samples are suitable, then there will be fewer difficulties in equipping the kitchen. You just need to go to a furniture store and choose an option that suits your price and taste. In the event that you are not looking for easy ways or space, for example, there is not enough space for a cabinet with a sink, then a decent way out of this situation would be to make a sink with your own hands that matches the area and your needs.

Trapezoidal cabinet with a round sink in the corner of a small kitchen

There are a number of significant advantages to creating a sink cabinet with your own hands.

The opportunity to save money by applying your skills in working with wooden elements, tools and plumbing.
Create a product required sizes, forms, fill with additional shelves on which to place the products household chemicals, brushes and various necessary little things, and provide space for a trash can under the shelf.
To make a cabinet, use any available material left over from the renovation that you have - wooden blocks, simple or laminated chipboard, ready-made shelves from cabinets, screws, corners.

Design and Construction- which is easier to do

When arranging a kitchen set, we have to build on the square footage we have. The arrangement of furniture can be different: in one or two rows, in the letter “G”, in the letter “P”, or have a complex shape that needs to be built to suit the personal configuration of the kitchen.

The arrangement of kitchen furniture directly depends on the location of the stove and sink. When doing it yourself, you also need to pay attention to which shape of the kitchen cabinet for the sink will be easier to make with your own hands. Sinks come in the following forms.

The sink is an important element of the installation

The structure of the niches is of great importance in installing a cabinet under the sink. They are installed in several ways.

DIY sink cabinet: necessary materials and tools

Laminated chipboard is rightfully considered the most popular material for making a sink cabinet with your own hands, since it is less susceptible to moisture.

Chipboard with cladding

If you choose this material, you must prepare a special edge tape in advance to avoid evaporation of the aldehyde resins contained in the chipboard. It is important to understand that their evaporation is harmful to the health of residents.

Chipboard without facing for subsequent painting

An excellent combination of price and quality is MDF board. It is denser than chipboard and the fastenings hold better.

Laminated MDF is better suitable for furniture due to its properties

Laminated chipboard or MDF coatings can imitate almost any material

Another option is solid wood, but it is more expensive, absorbs moisture and is difficult to maintain.

Solid wood for furniture making

When you decide on the main material, you need to prepare additional components.

Pressed cardboard for the back wall.
Plywood for crossbars.
Facing tape in the color of the cabinet.
Handles, hinges, corners and screws.

To bring your ideas to life, the following tools will help you: .

Pencil, ruler or tape measure.
Drill, screwdriver.
Phillips screwdriver.
Saw or jigsaw.
Internal corners, hinges for doors.

Tools and accessories for assembling a cabinet with your own hands

Manufacturing process: step-by-step instructions

The process of making a cabinet for a sink with your own hands should be divided into several stages.

Preparation. We draw a drawing of the sink cabinet on paper, based on measurements taken on site and your design wishes.
Model of a kitchen cabinet under the sink with the specified dimensions of width, length and height
Manufacturing of parts. Following the drawing data, we cut out the side walls, bottom and doors from plywood. In the case where the sink is countertop, a countertop is not needed. If the sink is mortise, transfer the dimensions to the countertop canvas and cut it out with a jigsaw. The remaining parts of the cabinet are also cut out with a jigsaw, and if you don’t have one, then using a hacksaw for metal will be more correct, since it causes fewer chips. Sand the edges with sandpaper.
Sawing parts for the cabinet of the required sizes

Side walls for sink cabinet
Assembly of frame parts. We start by attaching the walls of the cabinet with crossbars. This can be done in two ways - fastened with internal steel corners or connected with screws, then you need to take thicker plywood. Screw the bottom onto the screws.
Attaching crossbars to prepared side walls

Attaching the lower base by driving screws directly into the fixed crossbars
To fix the top of the cabinet we use the upper crossbars. The back wall will be attached to one of them. We make it thin, out of cardboard, and nail it onto small nails.
Attaching the top crossbars to secure the top of the cabinet under the sink

Fixing the back wall of the cabinet
Installation of facades. We apply and mark the places where the hinges are attached. Drill holes for the hinges and install. Hung doors are adjustable in height. The selection of hinges should be taken seriously, since their wide opening depends on them and whether they will become loose over time.
Assembly of the front frame according to the specified dimensions

Fastening cabinet doors under the sink
Decorate the appearance. If you need to paint, varnish, furniture film, screw in handles. On the inside of the door, attach a convenient pocket for a washcloth or other small items. To increase storage space, make a shelf. It should be easy to remove and put in place. To do this, a deep slot is cut from the wall in the middle, necessary for the passage of the sewer pipe. Place on bars secured with screws to the cabinet walls.
Ready-made kitchen cabinet made of chipboard for an overhead sink

To extend the service life of the product, it should be raised above the floor, placed on legs or wheels, plastic or thick rubber heels.

How to improve the appearance of a chipboard cabinet

Exquisite version of a sink with a cabinet for the kitchen

Having made a sink cabinet from ordinary chipboard, one more step will be added to these steps - transforming the appearance and protecting yourself from harmful fumes.

Apply a thin layer of putty and smooth with a spatula. After this procedure, the surface will become smooth.
After the putty has dried, apply a primer.
Apply tint varnish. We use a brush with natural bristles.

Some people consider wallpaper as a finishing option. Wallpaper should be washed. Glue to the surface using PVA glue. Having made a similar cabinet for a sink in your country house or apartment, you will definitely not be disappointed. You will use your design talent, save money and enjoy further contemplation of the creation of your labors.