How to assemble a palm tree from plastic bottles. How to make a palm tree with your own hands

Dispose of many unnecessary plastic bottles that have accumulated in the country over the summer is difficult. But there is a simple way out of this situation. All empty containers can be turned into beautiful ones. garden decorations. One of these decorations is a do-it-yourself palm tree made from plastic bottles. Step by step production and a good mood will help to cope with the task in no time.

Ways to use plastic

decomposition process plastic material lasts for 100 years. In order not to pollute environment, in any area, the export of plastic waste has been established. But there are some summer cottages from which no waste is collected. In this case, conscientious summer residents take out the bottles on their own. In order not to do extra work on export, in one evening you can make a palm tree from plastic bottles. It is enough to collect all the multi-colored containers on the site. You can decorate with palm trees:

There are three ways to make a palm tree from bottles. Each of the ways will help to realize your creative fantasies and create a real work of art from plastic. This masterpiece will be a real decoration for any site.

Types of decorations for a summer cottage

There are many options for making an artificial palm tree.

Thanks to this, the appearance of the tree can be anything.

Types of structures are:

With smooth trunks or in the form of petals. Sometimes a log is used as a base.
High and low.
With spreading smooth leaves or fringed.

Production of large palms

To make a palm tree large sizes, you will need a lot of plastic bottles. They begin to collect them in advance, involving the whole family and relatives in the process. For work you will need the following materials:

Plastic bottles of various colors. A trunk is made from brown containers, leaves are made from green bottles.
A metal rod is used for the trunk, a thick wire is used for the leaves.
Wide tape, scissors and a sharp knife.

What conditions to create a home money tree for it to bloom

You need to know that the more bottles are collected, the more magnificent the crown of the plant will turn out. To make the trunks and leaves look smoother and better, containers of the same size and diameter are used for manufacturing. Containers of other sizes should not be thrown away. Leaves are made from small bottles and inserted into the middle of the crown. In this place different value material will not be visible. But they cannot be used for the trunk. From narrow brown containers, trunks are constructed for other types of trees. Containers of different shades will make all crafts from plastic bottles brighter and richer. Palm step by step:

How to plant a pear seedling in the fall in the ground

Tree with unusual leaves

Except big tree, there is another way to make palm trees. It is a little more complicated, but it has a special originality. If you follow all the instructions step by step, then making a palm tree from bottles will not be difficult. The work process begins with the manufacture of the trunk:

All elements are strung on a metal bundle or cable and form a tree.

Bottle bottom construction

For the manufacture of this palm tree will need 2 times more bottles. Because the whole structure consists of bottoms. Step by step work order:

If you additionally decorate the palm tree and the surrounding area with other crafts, then the site will look even more interesting. For example, from plastic bottles you can make monkeys, bees and pigs. Swans made from car tires look interesting.

With original crafts made from plastic bottles, you can easily decorate your site! Such material is quite durable and easy to process, thanks to which a wide variety of products are created.

For example, you can create a wonderful palm tree from plastic bottles with your own hands! Such an evergreen palm will all year round decorate your site or, for example, a playground.

This master class will help you make such a craft!

You will need materials and tools such as:

- plastic bottles of brown and green;
- scissors;
- stationery knife;
- thick wire for the frame.

To begin with, it is worth deciding how high the palm tree will be. In this case, the palm tree will be approximately 1.5 meters high, and the second one will be 50 cm. For this, you need about 23-25 bottles of brown shade per trunk and 15 bottles of green shade for the crown!

To create a barrel, brown bottles need to be cut in half as in the photo below.

We need bottles of different sizes, those that are larger to use at the base, and smaller ones, at the top of the trunk. Bottle caps must be removed. You will need both the top of the bottle and the bottom.

Then, the edges of the blanks are cut out in the form of petals, about 6 “petals” should be obtained.

After, they need to be bent.

It should turn out like this.

In the future, they will fold into each other. Since there is no hole for the wire at the bottom of the bottle, it must be made using a hot nail, a knife, or it can also be drilled. Having folded the blanks, you get a rather fluffy trunk of a palm tree.

After all the details on the palm tree trunk are ready, you need to start creating palm leaves!

bottles can be used different shades green. You can also experiment with the volume of containers, for example, use two-liter containers at the base, and arrange smaller ones at the top. To do this, on green bottles you need to cut off the neck and bottom.

Then, cut the bottle into three pieces.

If you want wider leaves, you can cut it only into two parts. You will get such a preparation.

After, the strips need to be straightened in different directions.

This will give some splendor to the crown!

Now, the simplest and final stage in creating a palm tree from plastic containers remains!

After all the details are ready, you need to securely install a frame made of wire or other suitable material at the desired location on the site. And then, string on the frame all the received parts of the palm tree.

With a large stopper five liter bottle, make a latch on top to securely fasten the leaves. To do this, in the center of the cork, you need to make a hole, a slightly smaller diameter than the frame.

Then, after the crown is fully assembled, put it on the wire!

That's all, it turned out to be a very original palm tree that can be installed on the site or on the playground!

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

Such a craft, of course, will decorate the area, as well as give a positive mood to the kids, including, like a plastic basket made by yourself!

My younger son, he is seven years old, loves to craft. It does not matter what he works with - a designer, plasticine or cardboard - any craft in his hands turns into something important and useful for him. He especially likes when dad or mom are involved in this process. Of course, we almost never have enough time for such things, but if we get down to business, we work together and bring what we started to the end. The most serious of our collaborations was a palm tree made from plastic bottles.

How to make a palm tree from plastic bottles step by step with a photo

before closing kindergarten for repairs, all parents were instructed to do some crafts. The teacher told me: “Your task for the vacation is a palm tree of bottles.” We scratched our heads and got to work. Collected brown and green flowers, found a pair of long iron bars, cooked drill.

We started with the trunk: the bottom was cut off from each bottle to a height of about 20 cm. The edges were cut with teeth for texture and bent back a little so that it looked like the scales of a palm tree trunk. In each blank, I drilled a hole, the diameter of a long iron rod, which was supposed to serve as the basis for the barrel.

We cut the green bottles in half and cut the edges of each leaf shape. Necks were left on one of the halves, at the ends of the others I also drilled holes that were suitable in diameter.

Having made all the preparations, proceeded to the assembly!

How to attach palm leaves?
We take an elastic rod, not thick, but hard. When we make our leaves for a plastic palm tree, we cut the bottles and insert them one into one, neck to neck, but we leave a cork on the last bottle. We drill a cork and thread a rod, bend the rod at the end so that the leaves do not sleep, that's all.

That's all dear readers, thank you for visiting and reading my site, I advise you to learn how to do

A spectacular and eye-catching palm tree from bottles will serve great option garden decorations, garden plot, playgrounds in the yard or kindergarten. Made by hand according to a simple scheme, it will not only decorate the surrounding area, but also help a person to dispose of a large number of plastic containers.

How to make a palm tree from bottles with your own hands

Those who like to realize the most incredible fantasies will like a master class on how to make a palm tree from plastic bottles. For a tree, dark brown containers are suitable as stem blanks and green to make leaves. If there is no green container, it can be replaced with a variety of colors: blue, yellow, red. For trees, containers from kvass, carbonated sweet drinks or beer are useful.

The principle of creating a palm tree differs depending on what the craftsmen found. To form the trunk, you can use a round support made of wood, where the bottoms are nailed, or a cable with wire is suitable, where containers with cut bottoms will simply be strung. Leaves differ in splendor and length. If you want to get palm fans, then they are cut, notched and bent, and the elongated leaves are strung on a cable.

The area of the leaves and the trunk depends on the size of the bottles, but you should not get carried away and use a 6-liter or 20-liter container from under the water. A tree from 1.5 and 2-liter plastic containers of different colors looks much neater. Corks from them will also serve as a material for decoration - they decorate the base of a palm tree, you can make a mosaic out of them for flower beds, walls of houses for children.

How to make palm leaves

To get a spectacular palm tree with your own hands, you need to pay attention to the manufacture of its leaves. To make them, you need:

Cut the green bottles in half with scissors, cut the upper part into longitudinal strips so that the neck of a narrow diameter remains intact half a finger from the lid. The thinner the cut strips of plastic, the more magnificent the crown turns out and the more natural it looks in the photo.
Taking containers for leaves is not necessarily the same - this will not affect the appearance. The resulting blanks must be strung on a prepared hard high-voltage cable with a diameter slightly less than the neck to obtain one lush sheet. The number of leaves varies according to the prepared holes on the metal pipe used as a support. Then they should be fixed on the stem blank.

Step-by-step instructions for making a bottle palm trunk

The next detail in the question of how to make a palm tree from plastic bottles will be the trunk. Step-by-step instruction:

The trunk is made from dark brown dense containers, from which the bottom is cut off right along the contour.
Then the resulting workpiece is cut to obtain segments bent inward, serving as an imitation of a tuberous trunk. Cut them should be 2/3 of the height, without affecting the top.
It is worth making the required number of segments depending on the desired height of the plastic palm tree.
When all the blanks are ready, you need to string them on metal tubes. To do this, the container with its neck down sits on another with a slight shift to obtain a beautiful tuberous trunk. The principle of stringing is similar to making a cone. After that, all parts are fixed.

Connecting individual parts and installing a palm tree on the site

The last step on how to make a beautiful palm tree from plastic bottles is to connect all the blanks together. What should be done:

Prepare a tough solid foundation from sheet metal approximately 40*60 cm in size and at least 5 mm thick to support the weight.
2 metal rods with a length of 25 cm or more should be welded to the base or holes should be made with a drill for fixing. They need to wear metal pipes the desired height - this will be the base of the tree. At the same time, the diameter of the pipes is left slightly less than the neck of the bottles for the barrel.
The upper part of the supports will outwardly resemble a revolver drum; for this, 6-7 pipe sections are welded onto them. Bottles for the barrel must be assembled on rods, and palm leaves are inserted into the holes of the "revolver". For fixing, the cable inside them is bent, fixed from the side of the top and inside the neck of the outermost bottle. For the stability of the bottle structure and hiding the ugly lower part, the base is buried half a meter.

To create a mini bottle palm tree that would decorate a room in an apartment, you will need the following principles:

The barrel must be done as follows: cut off a third of the bottle from the neck, cut out 8 triangle petals on each part, without affecting the neck by half a finger. Each segment turns outward to obtain scales. The second half is used in the same way to save money, but first the desired hole is punched in it with a hot knife.
Wide fan leaves can be made as follows: cut off the bottom from a 1.5 liter plastic bottle, divide the side part into 3 parts without affecting the neck. Give the segment the shape of a petal by rounding at the end and narrowing at the throat. Unbend outward, cut the parts on both sides, form a fringe so that the uncut middle remains up to 1.5 cm wide. For splendor, manually shape each strip, bending up and down in sequence.
Make the assembly in the same way as a large palm tree, only use a simpler base.

Video

Any garden will seem unusual and original if you plant a palm tree there. However, in our climate, this idea is impossible - winter tropical plant obviously won't survive. The alternative would be plastic palm. The product is not afraid of frost and does not need to be watered.

DIY materials

There are several ways to make a palm tree from plastic bottles, and each uses the same components:

Plastic bottles are brown and green. Better two or one and a half liter.
Scissors.
Tape or glue.
A long, straight stick that will be the base - iron, plastic or wood.
Small wires or twigs for palm leaves.

Stages of product creation:

Wash and clean bottle labels.
Make leaves.
Make a tree trunk.
Fasten the leaves to the trunk and set in the yard.

This short description upcoming actions. Below are some instructions for beginners. Everyone will be able to choose which palm tree will look best in the yard.

First way

Making leaves

Green bottles are cut in half. You only need the part with the neck. A narrow section of it remains intact, and the rest is cut into many small strips. When a lot of blanks are made, they are all strung on a cable.

It is advisable to fasten them with glue or tape so that they are firmly attached to each other. Leaves need to be made at least 5-6. If you get more, the tree will look even more attractive.

palm tree trunk

The barrel needs brown bottles. The bottom of the bottom is cut off and the rest of the bottle is used. The process of creating a blank is identical to the first point - longitudinal strips attached to the neck are cut.

However, if in the first case the more stripes, the better, then there should be six of them. The edges are neat, slightly pointed and curl inwards. A lot of preparations are needed. How more details, the longer the palm will be.

It is advisable to select the length of the rod on which they will be strung, but it is important to consider that part of it is dug into the ground.

Foundation preparation

As already mentioned in paragraph two - the rod must be dug in. It should be deep enough in the ground so that the structure does not fall from the wind. Brown details are strung on it. The neck of the first workpiece is slightly buried along with the rod.

We fasten the leaves to the palm tree

The blanks from point one should have wires sticking out of the necks of the bottles. With the help of wires, the crown is tied to the top of the tree.

Second way

The actions are approximately similar to option 1. Only the type of cutting of parts changes, and this also changes the appearance of the product.

In this case, brown bottles are not used completely, but only 1/3 of the bottle (which is near the narrow part). Instead of 6 long strips, 8 short pointed petals are cut out.

To make the palm tree wide and voluminous, the petals should stick out. Due to the lack of materials, the bottom of the bottle can be used in a similar way, but then a hole must be punched in the bottom.

The leaves of this palm tree seem more real. For realism appearance, in addition to green bottles, you can use yellow ones. You can also experiment with leaf sizes. For huge sheets, you can take six-liter bottles, and for small ones, one and a half liter ones.

The bottom of the containers is cut off, and the rest is cut into 3 sheets attached to the neck. The leaves have a longitudinal stem (about 1.5 cm) and the rest is cut into many thin transverse strips on both sides of the leaf stem.

In order to present visually - the leaves will resemble, familiar to many, fern leaves. To make the tree lush, the fringe needs to be fluffed - the strips are bent alternately up or down.

You need to fasten the parts to each other, as well as in the first method.

Third way

The leaves are made from the bottoms of one and a half liter bottles. They are cut, holes are made in the middle and strung on a cable. Such a sheet, on the contrary, ends with a thin part of the bottle.

In this embodiment, a thin base will not work. For the base you need to use long log. The bottoms are cut off from brown bottles and nailed to the log until they cover it completely.

Describing these 3 ways can inspire creative people to create new, unusual options. A little tip: leaf and stem ideas can be combined to suit the taste of the garden owner.

In the photo, especially skillfully made palm trees from plastic bottles are surprisingly similar to real ones. The yard in which such beauty “grows” will look like exotic tropics, even in a snowy winter.