Summer residents spending the summer on personal plots, by the fall they are faced with the problem of recycling plastic containers from all kinds of soft drinks. Palm tree plastic bottles can be in an unexpected way turning trash into garden decoration.
How is this possible? It’s very simple, if you carefully study the instructions on how to make a palm tree from bottles, prepare everything necessary tools, Consumables, and be sure to stock up on a good mood.
Bottle palm tree: possible benefits and methods of use
As you know, plastic used for the production of food packaging does not decompose for hundreds of years when it gets into the soil. Centralized removal of this kind of waste is not established everywhere, and no one wants to litter nearby areas with plastic waste. What should a summer resident do in such a situation? Do you really have to take old plastic bottles to the city?
Don't rush! If you carefully collect bottles of brown and green plastic, in the off-season the whole family can turn this container into an unusual evergreen tree in an evening.
A palm tree made from bottles will perfectly decorate:
- local area;
- unsightly corner of the garden;
- plot next to outbuildings;
- children's playground;
- edge of land near the outdoor pool.
A palm tree made from plastic bottles according to the instructions below can become a spectacular decoration at any party, wedding, theme evening or children's party.
Making an original decorative item will not cause difficulties even for people who are far from this kind of creativity. The main thing is to prepare everything you need before making a palm tree from plastic bottles.
What do you need for a palm tree made from plastic bottles?
What should you stock up on before starting work? First of all, home handyman you will need plastic bottles of green and Brown. The green ones are blanks for the foliage of the tree, and the brown ones are the future trunks of the evergreen beauty. Moreover, the height of the plant and the splendor of the crown directly depend on the amount of containers collected.
Scroll necessary materials and tools for creating a bottle palm tree include:
- plastic containers;
- sharp stationery knife and scissors;
- durable tape;
- metal rod or plastic tube for the barrel;
- thick rope or braided wire for the base of the leaves.
When selecting plastic bottles for a palm tree, you need to take into account that trunks and leaves made from containers of the same diameter look better. If you have smaller green bottles in stock, they can be used for leaves in the middle of the crown, but small brown vessels will have to be used for tree trunks of a different type or size. Different shades plastic is not a hindrance. They will only add vitality and brightness to the man-made plant.
Bottle palm: manufacturing instructions
Step-by-step description of all the intricacies of creation plastic wood will help you quickly, literally in the evening, assemble with your own hands, step by step, a palm tree from plastic bottles of the intended height.
The process consists of three operations:
- leaf assemblies;
- creating a plastic plant trunk;
- connecting all parts and installing the finished tree.
Before making a palm tree from plastic bottles, the container must be washed and all paper and film labels removed from it.
Although there are many options for creating a plastic tree, the most magnificent long leaves with any chosen method are obtained from large, for example, two-liter bottles.
Making a palm tree crown from bottles
The bottom of the prepared green bottles is cut off with a stationery knife or scissors. It is no longer needed, and the upper half will become a blank for the sheet.
It is carefully cut towards the neck into thin longitudinal strips. How larger diameter plastic bottle, the thicker and more luxuriant the green palm leaves will be.
These are not the only option for creating leaves. If you cut the top of a plastic bottle, as in the photo, into four “petals”, and then cut each of them several times, you will get beautiful feathery foliage.
The resulting fragments of leaves are sequentially strung on a strong rope or durable electrical cable. A lid must be screwed onto the first piece in order to secure the “petiole” of the leaf with a knot at the top. The last part of the bottle is screwed in the same way.
A palm tree made from plastic bottles can have a top of any size, but trees whose crown consists of at least 5–7 leaves look better.
There should be a long stalk at the base of the finished palm leaves in order to later assemble and securely fasten the entire structure.
Assembling a palm tree trunk from bottles
To obtain a tree trunk similar to a natural one, you will need almost the entire bottle, except for the very bottom.
From the bottom almost to the very neck, longitudinal cuts are made on brown bottles, dividing the container into equal petals.
Only a small fragment of the bottom goes to waste
School practical people. Master class on making a beautiful and beautiful palm tree with your own hands from plastic bottles.
New technologies and innovations bring a lot of good things into people's lives, making them easier and more beautiful. But with this new thing, something bad also comes into our lives.
A plastic bottle is an example of the above. This thing was developed in 1941. The plastic bottle has taken the whole world by storm. She is extremely popular for a number of her positive qualities:
- cheap material,
- very technologically advanced,
- ease of use,
- can be reused for home purposes.
Unfortunately, the plastic bottle also brought bad moments:
- decomposition period under natural conditions is more than 100 years,
- during decomposition and combustion, hazardous and harmful substances are released.
For the past summer season Our family has accumulated a lot of plastic bottles. In the fall, they began to think about where to throw them, how to take them to a landfill. Youngest daughter suggested brilliant idea leave the plastic bottles at home and make something beautiful and original.
Everyone liked my daughter's idea. We looked at a lot of crafts on the Internet. We settled on the idea of making a palm tree.
Stage No. 1
Collect as many as possible plastic bottles. The color is green (from under Sprite). The color is dark brown (from Kvass or Beer). Huge quantities are needed. Immediately ask neighbors and friends for help. They will certainly help you in difficult endeavors.
Stage No. 2
Think carefully about what height and size your palm trees will be, how many palm trees there will be, and where you will install them.
We personally first make one tall palm tree.
Stage No. 3
We tear off all stickers and product labels. Gently rinse dirty plastic bottles in hot water.
Stage No. 4
We sort plastic bottles. This will make it easier and more comfortable to work. We start with brown bottles. Let's put the green ones aside, don't let them interfere. We'll use them a little later.
Stage No. 5
Let's start making a powerful and reliable barrel. We take plastic brown bottles. Carefully cut off the bottoms of the bottles. Then take a drill with an attachment. We make holes on a hard surface in the center of the bottoms. We take the fittings. We string the blanks onto the reinforcement one by one.
Stage No. 6
We bring green bottles from the warehouse. We will use them to make the leaves of our exotic palm tree. For this procedure we will need sharp scissors and a knife. Carefully cut off the bottom of the plastic bottle. Throw it away. Cut the remaining part into long strips.
Stage No. 7
We mount and securely fasten the workpieces to iron fittings. The length of the fittings depends on the number of bottles and the size of the palm tree.
Stage No. 9
The final stage. We reliably install all structural elements. We securely fasten the iron fittings to each other. We invited our neighbor, a welder. Five minutes of work. Here she is. Our beautiful palm tree. We reliably install the finished structure. Pour cement mortar into the hole, install the palm tree, and secure it with twine.
Our family decided that three gorgeous palm trees would soon grow in front of our house. We are in the Bahamas all year round. See photo No. 8. Our palm trees delight all our neighbors, make them stop all pedestrians and drivers, take pictures of the beauty and tell their friends about the miracle!!!
Every gardener dreams of making his garden well-groomed and beautiful. But the task of landscaping is much easier to cope with than decorating it, because garden decor It’s not cheap and doesn’t always look appropriate. And why waste extra money if the material is for original crafts lies right at hand. In this article we will tell you how to make from a plastic bottle a real masterpiece and what is needed to do it a truly exotic decoration for the garden - a palm tree.
Crafts for the garden, what you will need to create a palm tree
A plastic bottle is a practical and multifunctional thing with which you can turn your garden into a “decor museum”. Anyone who says that this is “garbage and bad taste” simply has not seen truly good DIY garden crafts. Handmade is not only fashionable, but also in demand, because what is done with one’s own hands is valued many times higher than factory-made items.
Really inexpensive and available materials For country crafts so many. But among them, plastic bottles lead in terms of practicality, durability and unpretentiousness.
Decorative elements for the garden made from plastic bottles not only attract admiring glances with their uniqueness, but also have an unlimited shelf life - they are not afraid of either snow or heat.
Did you know? Plastic containers can withstand temperatures ranging from -40°C to +200°C.
In addition, plastic bottles are like plasticine in the hands of a sculptor - pliable, elastic, and allow you to do almost anything with them.
In order to make a palm tree for your garden from bottles, you will need:
- plastic bottles of several colors;
- sharp knife (stationery or construction knife) and scissors;
- tape and/or construction adhesive;
- barrel base (metal pin or hollow plastic tube);
- strong rope;
- wire.
Instructions for making leaves
At first glance, it may seem that making a tree from plastic bottles with your own hands is very difficult. But if you act step by step, it turns out that it is not only easy, but also very exciting.
First of all, let's start making the crown of the palm tree. Take a plastic bottle and cut the bottom to about 1/3 of the bottle's length. The bottom will no longer be useful, and the part with the neck will become a blank for foliage. Palm leaves can be of two types: fluffy and tulip-shaped. In the first case, using a stationery knife or scissors, we make longitudinal cuts towards the neck, without cutting 3-4 cm to it. The width of the strips can be arbitrary, but the crown of small leaves looks most impressive.
The second version of the leaves is made in the following way: the workpiece is cut into four equal parts (cuts towards the neck of the bottle); We bend each part and, using scissors, give it the shape of a needle-shaped, figured sheet.
How to make a palm tree from bottles, the first or second method - decide for yourself, it's a matter of taste. The finished leaves will need to be collected into a branch. To do this, take a rope or cable and string all the blanks one by one in one direction so that the neck fits into the cavity of the previous bottle. One palm branch will require about 5-7 finished pieces. Be sure to screw the cork onto the neck of the first “sheet” - this is necessary to secure the rope. Don't forget to leave a long edge so you can gather all the branches together later.
Important! If you have a child, and the palm tree is within his reach, then the cut edges of plastic bottles should be melted so that the baby does not get hurt.
How to create a trunk for a palm tree
Let's proceed to the next stage of making a palm tree from plastic bottles - barrel assembly.
The trunk of a palm tree can also be made in several ways, and here are some of the best ones:
Did you know? One of the record-holding palm trees is decorative tree, the trunk of which reaches 4.5 m in height.
Connection of the trunk and crown of an evergreen tree
The final stage of assembling your craft will be connecting the finished parts: branches and trunk. This is a very important and responsible part, because the stability of the entire structure depends on how correctly everything is done. We will tell you how to make a tree from plastic bottles that is safe and reliable.
Here the rest of the equipment will come to the rescue: tape, construction glue and wire.
To begin, we will connect the remaining edges of the rope on which the leaves were strung into a bundle and wrap them with tape. If additional fixation is needed, we tie the branches of the leaves with wire, wrapping it around the base of the necks. We connect the resulting bundle to the tree trunk using glue (or construction foam). If necessary, make a few more rolls of tape at the junction.
Plastic bottles are an excellent material for expressing creativity. A huge number of crafts fit organically into landscape design adjacent areas. This hobby also performs a noble function, preventing clogging environment non-degradable waste. There are many ways to make a palm tree from plastic bottles. The proposed options will help you build a real masterpiece that will become a worthy element of decorating the site.
First option
A real palm tree is impressive in size. To make a plant close to the original, you will need a lot of plastic bottles. Therefore, it is better to distribute the task of collecting containers in advance among the immediate environment. Brown and green containers are designed for classic palm trees. Extraordinary and extravagant individuals can experiment with plastic bottles blue color or other shades unconventional for palm trees.
Advice! Palm long time will retain its original attractiveness if plastic bottles are pre-soaked in warm soapy solution and carefully remove any remaining labels and adhesive solution.
Materials required for work:
- plastic containers;
- scissors and stationery knife;
- wide tape;
- thick wire for leaves;
- metal rod for the barrel.
The aesthetics of the craft will be ensured by bottles of the same volume. For large plant 2-liter containers are optimal; a medium-sized plant can be made from a 1.5-liter container. 0.5 liter bottles are appropriate for a dwarf specimen.
A palm tree made from plastic bottles is assembled with your own hands in stages:
- initially the branches are designed for a lush crown;
- then the trunk is assembled;
- Finally, the structure is connected together and securely fixed to the surface.
Let's look at how to make a crown step by step:
The number of branches at the top may vary, but is aesthetically pleasing appearance palm trees are achieved with a minimum of 5-7 lush leaves.
When the preparation of the crown is finished, they move on to assembling the palm trunk. Here you will also need almost the entire plastic bottle, with the exception of the bottom. The container is cut lengthwise into 5 equal fragments, as shown in the photo:
Palm blanks are strung on a rod, each new level is offset. The result should be something like this:
Advice! To connect the crown and trunk of the palm tree together, at the top metal fittings parts are welded where the wire with leaves can be threaded. This is the most reliable method of fixation. Small, light leaves are secured with tape.
For heavy structures, it is preferable to have a reliable foundation. There are several options for installing a palm tree from plastic bottles:
- the trunk can be fixed on a metal platform, which is subsequently buried in the ground;
- the reinforcement is buried half a meter into the ground and concreted;
- lighter products can be covered with brick chips with further compaction of the soil around the palm trunk.
Second option
The following method of forming a palm tree from plastic bottles with a step-by-step algorithm of actions is distinguished by its originality.
Work begins with the labor-intensive process of assembling the barrel:
- You will need a third of the plastic container, cut off from the neck side.
- All blanks are cut into 8 parts, leaving a small area near the base untouched.
- In order for the palm trunk to have a scaly surface, each segment is bent outward.
- Reduce waste plastic bottles Using the bottom of the container will help. To do this, use a hot knife to make a hole of a suitable diameter at the bottom. Otherwise, the process of forming blanks is identical to the algorithm described above.
Palm leaves can also be made into other shapes. The crown will be presented in the form of wide foliage, reminiscent of a fan. You can use green and yellow plastic containers for it.
Comment! The splendor of the crown directly depends on the number of leaves from the bottles, and their width depends on the size of the containers.
It is better to make the crown of a tall palm tree from a 5-liter container; for a medium-sized plant, 1.5-liter containers will be sufficient. Cutting the leaves of a fan is quite simple:
- on plastic container the bottom is removed;
- the bottle is cut lengthwise into 3 parts;
- each segment is rounded at the end;
- the petals are cut into fringes on both sides, leaving a narrow untouched strip about 1.5 cm wide in the middle;
- splendor is achieved by bending the fringe in different directions.
Finally, the elements strung on the cable and fittings are fastened together.
Third option
Another method involves creating a palm tree using the bottoms of plastic bottles. It should be noted that such a container will require much more.
Crown design step by step:
- At each bottom it is necessary to make a hole whose diameter corresponds to the prepared base. The work is performed with a hot knife or drill.
- Green bottle blanks are strung on a rigid cable.
- The edges of the wire are secured with caps so that the parts remain in place.
Instructions for making a palm tree from plastic bottles.
On this moment there are many ways to decorate your country cottage area. For this purpose, plastic bottles, tires and flower pots. If you wish and have a good imagination, you can come up with your own new option creating an exotic tree.
Basic materials for making palm trees for the dacha:
- Plastic bottles
- Flower pots
Below are interesting and non-standard options for making palm trees for a summer cottage.
It all depends on the size of the tree. If you have a large summer cottage, you can make a fairly tall palm tree with a lush crown. It is enough to take 10-15 brown plastic bottles for the trunk. The approximate volume of bottles is 2.5 liters. How bigger bottle, the larger the barrel diameter will be. You will need 10-30 green plastic containers per crown. This variation in quantity is explained by the fact that the shape of the leaves can differ significantly.
How to make a palm tree with your own hands from plastic bottles step by step: step-by-step instructions
There are many ways to make an exotic tree. The methods for cutting bottles differ. It depends on the availability of free time and imagination.
Materials for making palm trees:
- 12 2.5 liter bottles brown
- 20 green bottles of 1.5-2 l
- Cable, thickness 1-1.5 cm
- Metal pipe for the stem
Instructions:
- Take brown containers and cut the bottom along the contour of the recesses, as a result the bottom of the bottle should resemble an asterisk
- Cut the container 10 cm before the neck of the bottle, you should get 6 petals
- String the prepared bottle structures onto a steel tube previously dug into the ground. You should get a relief trunk
- Start making leaves. It is necessary to cut the green containers in half and cut the upper part into strips. The width of the strip should be 2-3 mm. The thinner the stripes, the fluffier the crown
- Now string 4 plastic pieces onto the cable. The cable must be sufficiently rigid. It should bend well, but also keep its shape
- Attach a sheet of wood with 5 holes in a circle to the top of the rod with the trunk. Insert the prepared leaves into these holes. Adjust bottles if necessary
The barrel can be made by cutting a pipe from a plastic bottle. But there is also an option that will allow you to use the bottoms. In this case, much more raw materials will be needed.
Instructions:
- As a basis for making a barrel, you can use a smooth wooden log, required height
- Cut off the bottom of a brown plastic bottle. Using screws, screw the bottoms into the barrel
- Do this in a circle, imitating the topography of a palm tree trunk
- Continue screwing the bottoms to the very top of the log.
- But you can make a palm tree trunk from the cylindrical part of a bottle
- To do this, the lower part is cut off, and the bottle itself is cut only halfway into 6 petals
- After this, the bottles are connected to each other
The crown can be made using green plastic bottles. The density of palm branches depends on the number of plastic bottles.
Instructions:
- To do this, you need to take green bottles and cut them into thin strips, after cutting off the bottom
- In this way, a branch is formed of several bottles, which are then fastened together by stringing one on top of the other
- If there are not so many bottles, then you can make the branches differently. To do this, the green container is cut into 5 parts, not to the end of the bottle. There remains a distance in the neck area
- Using scissors, a kind of fringe is made along the edges of the cut petals. It is necessary to make it stick out in different directions
- The resulting leaves must be connected to each other to form a crown.
How to make a crown for a palm tree from plastic bottles?
To do this, you need a base and the leaf blanks themselves.
Instructions:
- Take a copper cable and cut it into small pieces
- String the workpieces onto the wire and secure the edges
- Bend the cable if necessary
- Next, you need to insert the leaves into the base for the crown, this can be a metal ring or a piece of wood with holes
How to make a palm tree from plastic bottles
The palm tree is collected from the bottom up. To do this you will need the following components:
- Barrel blanks
- Metal pipe
- Crown
- Scotch
Instructions:
- Starting from the bottom, assemble the stem by stringing bottles one after another. You can fasten them using tape or a hole punch.
- Assemble the crown by staggering the leaves. Straighten the branches and bend them using the cable.
- You can add texture and fluffiness to the leaves using scissors. Heat is also used to curl the petals. This can be done using gas burner or a regular fire.
- It is necessary to connect using tape; when there is 30 cm left to the top, it is time to assemble the crown.
- Attach the crown to the trunk. You can fix the top of the palm tree with its trunk using construction stapler, liquid nails or tape.
Making a palm tree from plastic bottles is not at all difficult. All you have to do is be patient and use your imagination.
