Miter saw, one of the most important tools for construction works. Whether you're remodeling a room or building a shed in your backyard, you'll definitely need a miter saw. Not everyone knows how to choose the right tool for the job. Professional builders and finishers own experience have studied the models of saws, therefore, it is easier for them to navigate in a variety of models. We have compiled rating of the best miter saws and singled out models with broach and combined into separate categories. So it will be easier for beginners to navigate when choosing a tool for carrying out planned work.
Arriving at the store, there is nothing difficult to choose your favorite miter saw. You can focus on the price or seek advice from the seller. However, before you go shopping, you should understand that miter saw selection depends, not only on its price and popularity, but also on the type of work for which you need it.
Before we move on to the rankings, here is a list of companies that have proven themselves in the field of reliable construction tools: JET, BOSH, Hyundai, Metabo, DeWalt, Festool. Buying a saw from one of these companies, you will be sure of its quality and reliability. , .
1. The best miter saw of 2018 - 2017 in the category of inexpensive: Bosch PCM 7 - Price 11,500 rubles.
 |
 |
The Bosch PCM 7 miter saw belongs to the category of amateur tools and falls into the category of inexpensive tools. It is suitable for beginner builders and for individual application in minor renovation. Feedback from consumers is positive, everyone likes the aluminum sole, which contributed to the overall weight of the saw, only 8 kg. This makes it easier to transport and install the saw. Bosch PCM 7 is equipped with a guide laser, a choice of intermediate tilt angle and a fixed table for more comfortable and precise work. In the category of professional miter saws, Bosch PCM 7 did not fall due to the small diameter of the blade, 190mm and low power, 1100W. These figures are low for professional use when it comes to working on a large facility. But, they are enough for private use and for beginners.
According to consumers, the Bosch PCM 7 model is one of the best miter saws for home use. Not for nothing, she occupies the top line of the rating and heads the category of inexpensive saws.
Pros:
- Excellent cut quality is ensured by 4,800 revolutions per minute of the disc;
- Built-in workpiece fixing clamp;
- You can connect a vacuum cleaner to collect chips;
- Affordable price.
Minuses:
- The sawdust bag does not cope with the collection of waste.
2. The best miter saw of 2018 - 2017 in the category of inexpensive: JET JMS-10 - Price 12,000 rubles.
The JET JMS-10 miter saw is an excellent choice if you need to process or saw small pieces of wood. Its difference from competitors in the class, cast aluminum table with the ability to rotate. For beginners, the table helps to cope with the saw, safely cut the workpiece and choose the exact angle of the cut. As we have already said, the JET JMS-10 miter saw, perfect option for beginners and for home use. The manufacturer has done everything possible to facilitate the work of people who do not have the skills to handle a saw. The disc supplied with the JET JMS-10 gives a smooth cut without unnecessary serifs, and the built-in table clamps and end screw securely hold the workpiece in the desired position.
You should take into account that the JET JMS-10 miter saw with a base blade is suitable for processing rough workpieces. In order to make even cuts, for example, for wooden furniture elements, it is worth buying an additional disc with small teeth. This will make the cut smooth.
Pros:
- Built-in laser pointer;
- The table extension can be removed;
- Good system sawdust removal.
Minuses:
- Must be tuned before each job;
- Not suitable for metal work.
3. The best miter saw 2018 - 2017 with broach and combined: Metabo KGS 216 M - Price 19,000 rubles.
Experts and professional builders call the Metabo KGS 216 M miter saw the best model for a novice builder and an amateur who started repairs. It belongs to the category of pull saws and combined versions, which strengthens the position of Metabo KGS 216 M in the market for construction tools. Here is just a small list of advantages that distinguish Metabo KGS 216 M from competitors: built-in illumination of the work area, it helps a lot when working in rooms with poor lighting, built-in laser pointer, contributes to the exact cutting line, Plus, cut with a broach up to 205 mm in a strictly fixed direction. You may think that the price of the Metabo KGS 216 M miter saw is too high, however, this is one of the few models with excellent value for money.
Fans will love that the Metabo KGS 216 M miter saw is equipped with a pair of retractable extensions and a chip collection system. Metabo KGS 216 M is in the ranking of the best miter saws, in the amateur tools category. Before professional level it falls short due to the limited number of settings and the frankly weak build bag.
Pros:
- Excellent cut quality
- Nice set of settings.
Minuses:
- The laser direction line is blocked by sawdust;
- Too many fakes on the Russian market.
4. The best miter saw 2018 - 2017 with broach and combined: Hyundai M 2500-255S - Price 18,000 rubles.
 |
 |
Model miter saw Hyundai M 2500-255S is at the turn of the rating, between the categories of amateur and professional saws. The manufacturer claims a broach up to 340 mm and 2 kilowatts of power. Which is quite enough for professional use. But, we decided to leave it in the category of amateur miter saws so that amateurs can consider it as an option when conducting complex work. Hyundai M 2500-255S is equipped with a cast turntable, works with saw blades with a diameter of 255 millimeters, plus, it is one of the few models equipped with an automatic brake for high-quality woodworking. Broach and combined features, both plus and minus saws Hyundai M 2500-255S. The backlash of the broach is insignificant, and with strong pressure on the tool, an unpleasant chip may appear at the end of cutting the workpiece. This limits the use of Hyundai M 2500-255S in fine carpentry, especially when it comes to processing furniture elements.
Pros:
- Good start with smooth running;
- Adjustable disc speed;
- Built-in guide laser;
- Protective blocking of disk operation.
Minuses:
- The laser clogs up quickly;
- IN enclosed space use only with a vacuum cleaner.
5. The best miter saw 2018 - 2017 with broach and combined: Festool with broach KAPEX KS 120 EB - Price 120,000 rubles.
 |
 |
So we got to the models of miter saws belonging to the category of professional construction tools. Feedback from builders about the Festool model with a KAPEX KS 120 EB broach is unambiguous. It is called the best saw in its class, despite the high price. The feed saw Festool KAPEX KS 120 EB belongs to the category of high-precision tools and is suitable for fine work especially in the furniture industry. An impressive broach, 308 millimeters, expands the possibilities of the saw. Plus, processing a beam with a thickness of 88 mm is not a problem for her. If you are looking for a miter saw for precise and accurate work, then be sure to check out the Festool with KAPEX KS 120 EB feed in the store. The high price is fully justified. Our rating of miter saws simply could not do without this tool.
Pros;
- Design and work at the highest level;
- Precise workpiece processing.
Minuses:
- High price for private use.
6. The best miter saw 2018 - 2017 with broach and combined: DeWALT DW 717 XPS - Price 57,000 rubles.
Another representative of the professional industry, the DeWALT DW 717 XPS miter saw. Everything in its design speaks of a clear design and thoughtful placement of each element. Even the illumination of the work area has a dual function. Illumination of the work area and the creation of an accurate cut line of the saw blade. It is immediately clear that experienced engineers and professional carpentry builders worked on the production of the DeWALT DW 717 XPS. A professional miter saw attracts potential buyers, not only with its capabilities, but also with a guarantee. None of the competitors gives a 5-year warranty on their tools, and the DeWALT DW 717 XPS model can boast of it. This indicates its reliability and the manufacturer's confidence in the quality of its product.
The DeWALT DW 717 XPS miter saw allows you to adjust not only the cutting angle, but also the depth, to the nearest millimeter. This will appeal to furniture manufacturers and builders who carry out precision woodworking work.
Pros:
- Good power;
- Affordable price for the professional segment;
- Good stability;
Minuses:
- No soft start.
How to choose the best miter saw?
Our rating of the best miter saws with broach and combined models is just an overview of popular models. When choosing a tool, you should start from the type of work, volume, and how often you are going to use the saw. If you want to do something at home or in the country, then you should not spend money on expensive and professional tools. In the case when you are looking for a tool to work and fulfill orders, it is better to spend more than to redo the job.
To begin with, we will determine whether it is necessary in it broach mechanism. A broach saw will allow you to work with wider cuts, but it will be more expensive, besides, “extra” joints will give more backlash over time, accuracy will suffer. If we are talking about a budget saw, then this problem will “come out” faster, it is worth checking the backlash even on a new one right in the store.
Engine power it will always come in handy, but do not forget about the soft start and the spindle brake - a jerk and a surge of current at the start are unpleasant in operation and do not have the best effect on the power grid (especially if the network is weak - a village, a workshop in a garage), and the brake gives greater safety, and without he will constantly have to wait for the disk to stop. If the motor has a smooth speed control, this is completely excellent: such a saw will be better able to adapt to working with different materials.
Myself motor can be both collector and asynchronous. The former have excellent torque, which is why they are often used in hand-held power tools. But the asynchronous ones are practically silent and do not require replacement of brushes, and they have no risk of wear of the collector as a fact. But their speed sags heavily under load, the lack of torque affects, and their starting current is high. So we would advise all the same "collector".
Be sure to check the quality of the scales and the possibility of fine adjustment- if you need to join parts with high accuracy, the saw must be able to set the angle without errors.
The miter saw is an electrically powered circular saw for cross cutting long workpieces. Craftsmen use such saws for minor repairs, furniture manufacturing and other work related to sawing wood, plastic, plexiglass, etc. To help you choose the right tool, we have compiled a rating of miter saws, where we consider 15 best models in different price segments.
Let's highlight the most important functions and features that should guide the evaluation of tools.
| Comparison criterion | Characteristics |
|---|---|
| Power, W | Power tools in all categories can be 1000 - 2000 watts. The ability to process not only wooden details, but also structural elements made of other materials - plastic, plexiglass, thin-walled aluminum, chipboard, fiberboard, MDF, etc. |
| Number of revolutions, rpm | The quality of the cut depends on the number of revolutions. Can be between 3200 - 6000 rpm |
| RPM control function | Allows you to better control the cutting process and adjust the tool for processing workpieces from different materials. Not available on all models |
| Function of maintaining the number of revolutions with increasing load | Increasing the cutting load causes the disc to brake. The function allows you to maintain a constant number of revolutions, which improves the quality of the cut. Not available on all models |
| Disc diameter, cm | The depth of cut depends on the diameter of the disc - what larger diameter, the larger workpieces can be trimmed. The diameter of the disc in tools for domestic use is 21 cm, for professional tools, discs with a diameter of 25 and 30.5 cm are used |
| Maximum depth and width of cut at different angles, mm | Ability to process elements of a certain section. The cutting depth varies in the range of 60-120 mm, the cutting width in the range of 120 - 340 mm |
| Feed function | Ability to process workpieces of greater width. The broach allows you to trim parts with a width of more than 300 mm |
| laser illumination | The laser beam marks the cutting line, which makes work easier and improves the quality of processing. Not available on all models |
| Dust extraction function | Helps remove sawdust and wood dust from cutting working area. In one version, the waste is collected in a special bag, in another version, the tool is equipped with a nozzle to which a vacuum cleaner can be connected. |
| Circular saw function | The ability to dissolve blanks in length. Not available on all models |
| Weight, kg | Convenience of work and transportation of the tool. household tools can weigh up to 10 kg, professional models - 20 kg or more |
| Model | Power, W; frequency, rpm; disc diameter, cm |
Additional options | price, rub. |
|---|---|---|---|
| Initial category - inexpensive, high-quality tools | |||
|
|
9342 | |
|
|
12750 | |
|
|
10730 | |
|
|
9164 | |
|
|
11990 | |
| Middle category - tools used regularly for household and repair work | |||
|
|
19200 | |
|
|
25800 | |
|
|
26399 | |
|
|
23940 | |
|
|
22890 | |
| Category "pro" - tools for professional builders | |||
|
|
35150 | |
|
|
57940 | |
|
|
49390 | |
|
|
44690 | |
|
|
47999 | |
1. Metabo KS 216 M Lasercut - from 9342 rubles.
Inexpensive, compact and ergonomic tool for the home master from a German manufacturer. It is intended for work with preparations of small section. It has a one-piece, durable silumin body and, at the same time, is light in weight, which makes it easy to move the tool from place to place.
Saw Features:
- The laser, located in the upper part of the working head, allows you to mark workpieces of complex shape;
- Illumination with three bright LEDs;
- Soft apron for collecting waste in the dust collector;
- Extenders of the desktop, increasing its width up to 700 mm;
- Clamp for clamping workpieces, which can fix workpieces from above and from the side.
| Characteristics | Meaning |
|---|---|
| Power, W | 1350 |
| Number of revolutions, rpm | 5000 |
| Disc diameter, cm | 21,6 |
| 60 | |
| 120 | |
| Weight, kg | 9,4 |
| Functions and features |
|
| 47 / 2 | |
| 47 / 47 | |
| Additional options |
|
| Germany / China | |
| price, rub. | 9342 |
A detailed video review demonstrating all the positive properties of the tool:
2. ZUBR ZPT-255-1800 PLR - from 12750 rubles.
Tool Russian production, which has high power, allowing to trim, in addition to wood, structural elements made of plastic and thin-walled aluminum. The main feature is the function of a circular saw, which allows you to dissolve the workpieces along the length. For this, the tool is equipped with a special work table, which is positioned at a different level in relation to trimming table. Tools of a higher class are rarely equipped with such a function. In addition, the ZUBR saw is equipped with other options, among which we can distinguish a broach that allows you to trim workpieces with a width of more than 300 mm.
| Characteristics | Meaning |
|---|---|
| Power, W | 1800 |
| Number of revolutions, rpm | 4800 |
| Disc diameter, cm | 25,5 |
| Maximum cutting depth, mm | 75 |
| Maximum cutting width, mm | 340 |
| Weight, kg | 19,9 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 0 |
| Desktop rotation left / right, deg | 47 / 47 |
| Additional options |
|
| Developer/Production Location | Russia / China |
| price, rub. | 12750 |
Watch a video with detailed instructions for assembling the tool and using it in two modes - a circular or miter saw:
3. Elitech PT 1825 - from 10730 rubles.
Russian-made tool at an affordable price. It has the characteristics and functions inherent in models from higher categories - speed, power, disc diameter, broach function, allowing you to work with workpieces of large cross-section and width. Light weight allows you to transport and move the saw from place to place. The inclusion of the laser marker is carried out by a separate button, the rotations of the desktop are fixed after a certain angular distance. In addition to standard functions, the tool is equipped with a soft start and an electronic engine brake, it is equipped with work table extensions that allow you to work with long workpieces, a clamp for clamping parts.
| Characteristics | Meaning |
|---|---|
| Power, W | 1800 |
| Number of revolutions, rpm | 4800 |
| Disc diameter, cm | 25,5 |
| Maximum cutting depth, mm | 75 |
| Maximum cutting width, mm | 305 |
| Weight, kg | 15,5 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 0 |
| Desktop rotation left / right, deg | 45 / 45 |
| Additional options |
|
| Developer/Production Location | Russia / China |
| price, rub. | 10730 |
Watch a video demonstrating all the additional options that improve the user experience:
4. Hyundai M 2000-255 - from 9164 rubles.
The tool was developed by a South Korean company. It has high power and speed, while being light and compact. The saw has an electronic speed control function that allows you to adjust the saw for processing various materials, in addition to wood blanks. Smooth start with protection against sudden activation helps to start work in a convenient mode and get a better saw cut surface. The tool is equipped with desktop extensions for working with long parts.
| Characteristics | Meaning |
|---|---|
| Power, W | 2000 |
| Number of revolutions, rpm | 5000 |
| Disc diameter, cm | 25,5 |
| Maximum cutting depth, mm | 75 |
| Maximum cutting width, mm | 135 |
| Weight, kg | 7 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 0 |
| Desktop rotation left / right, deg | 45 / 45 |
| Additional options |
|
| Developer/Production Location | South Korea / China |
| price, rub. | 9164 |
Watch a video with an overview of the features of the tool regarding machining accuracy:
5. Einhell TH-SM 2131 Dual - from 11990 rubles.
German saw, compact and light. The body, bed and work table are made by casting, providing high strength and reliability of the structure. The main function that distinguishes the saw from other tools in this price segment is the broach, which allows cutting parts with a width of more than 300 mm. Turns of the working table and the working head are easily fixed in the desired position with the help of mechanical stops and screw clamps. The miter saw is equipped with rubberized feet, on which you can securely set the tool on any surface. A nozzle for connecting a vacuum cleaner is designed to remove cutting waste.
| Characteristics | Meaning |
|---|---|
| Power, W | 1500 |
| Number of revolutions, rpm | 5000 |
| Disc diameter, cm | 21 |
| Maximum cutting depth, mm | 62 |
| Maximum cutting width, mm | 310 |
| Weight, kg | 11 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 45 |
| Desktop rotation left/right, deg | 45 / 45 |
| Additional options |
|
| Developer/Production Location | Germany / China |
| price, rub. | 11990 |
Watch a video with a detailed analysis of all the characteristics of the tool:
Editor's Choice
In the initial category, two tools are the most attractive: Metabo KS 216 M Lasercut and ZUBR ZPT-255-1800 PLR. A very compact Metabo KS 216 M Lasercut miter saw from a well-known Japanese manufacturer at a low cost has a wide range of functions that allows high-quality processing of small sections.
The domestic tool ZUBR ZPT-255-1800 PLR, which also has a low cost, in addition to other functions, is equipped with the ability to dissolve wooden elements by lenght.
6. Ryobi EMS254L - from 19200 rubles.
A tool from a Japanese developer with high power and speed, guaranteeing a quality cut. The main distinguishing feature is the broach, which allows processing parts with a width of more than 300 mm. Illumination of the working area is carried out with the help of two LEDs, providing visual control over the cutting of parts. The inclusion of a laser marker and desktop illumination is performed using separate buttons. It is completed with desktop extenders, a clamp for workpieces, a socket wrench, which ensure the convenience of working with the tool.
| Characteristics | Meaning |
|---|---|
| Power, W | 2000 |
| Number of revolutions, rpm | 4500 |
| Disc diameter, cm | 25,4 |
| Maximum cutting depth, mm | 90 |
| Maximum cutting width, mm | 300 |
| Weight, kg | 16,2 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 0 / 45 |
| Desktop rotation left / right, deg. | 45 / 45 |
| Additional options |
|
| Developer/Production Location | Japan / China |
| price, rub. | 19200 |
Watch a video with a brief demonstration of the tool's capabilities in action:
7. AEG PS 254 L - from 25800 rubles.
Tool made in Germany, ergonomic, comfortable to work with. High power and speed ensure high-quality cutting of workpieces. The processing parameters of workpieces - the depth and width of the cut - are easily set using scales and fixed positions for rotating the working table and tilting the working head. The broach function makes it possible to process workpieces of large width. The cutting depth adjustment function allows you to select grooves on the workpieces right size- this is necessary in the manufacture of complex furniture parts or building joinery.
| Characteristics | Meaning |
|---|---|
| Power, W | 2000 |
| Number of revolutions, rpm | 4500 |
| Disc diameter, cm | 25,4 |
| Maximum cutting depth, mm | 90 |
| Maximum cutting width, mm | 305 |
| Weight, kg | 19,5 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 47 / 0 |
| Desktop rotation left / right, deg | 50 / 50 |
| Additional options |
|
| Developer/Production Location | Germany / China |
| price, rub. | 25800 |
Watch a video with a visual demonstration of all the characteristics of the tool:
8. Makita LS 1018 L - from 26399 rubles.
The tool is equipped with all the features for high-quality processing of parts. The broach allows you to work with workpieces of large width. Setting the parameters for processing parts is carried out using convenient buttons that fix the desired position of the desktop and the working head at certain angles. The tool has additional options for convenience of work - extensions of the desktop for long parts, a sliding removable ruler-clamp, a clamp for clamping parts. Adjusting the depth of cut allows you to process parts of complex shapes.
| Characteristics | Meaning |
|---|---|
| Power, W | 1430 |
| Number of revolutions, rpm | 4300 |
| Disc diameter, cm | 26 |
| Maximum cutting depth, mm | 91 |
| Maximum cutting width, mm | 310 |
| Weight, kg | 19,9 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 45 |
| Desktop rotation left / right, deg | 45 / 60 |
| Additional options |
|
| Developer/Production Location | Japan / China |
| price, rub. | 26399 |
Watch a video with a detailed demonstration of its capabilities and positive properties:
9. JET JSMS-12L - from 23940 rubles.
A tool from a Swiss developer with high power and speed. The laser marker is equipped with a fine adjustment screw that allows you to adjust the beam line in the desired parameters. Fixing the rotation of the desktop is made with the help of a stopper latch, which makes it possible to quickly and precise installation. The cutting depth adjustment function allows you to process complex parts in the manufacture of furniture or joinery building products. The tool is equipped with desktop expanders for working with long workpieces, a clamp for fixing parts.
| Characteristics | Meaning |
|---|---|
| Power, W | 1800 |
| Number of revolutions, rpm | 3800 |
| Disc diameter, cm | 30,5 |
| Maximum cutting depth, mm | 105 |
| Maximum cutting width, mm | 305 |
| Weight, kg | 22,5 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 0 |
| Desktop rotation left / right, deg | 45 / 45 |
| Additional options |
|
| Developer/Production Location | Switzerland / Taiwan |
| price, rub. | 23940 |
Look short video overview of tool characteristics:
10. Metabo KGS 254 M - from 22890 rubles.
A tool from a German developer. It is equipped with all the functions necessary for work in the "medium" category - sufficient power and number of revolutions, disc diameter, broach, which allow processing workpieces of large cross-section and width. The body of the tool is made of high-strength aluminium. The cutting depth adjustment function makes it possible to process complex-shaped parts. Bright LEDs illuminate the desktop. The spindle lock feature allows you to quickly and safely change the work disk.
| Characteristics | Meaning |
|---|---|
| Power, W | 1450 |
| Number of revolutions, rpm | 4500 |
| Disc diameter, cm | 25,4 |
| Maximum cutting depth, mm | 92 |
| Maximum cutting width, mm | 305 |
| Weight, kg | 16,3 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 47 / 2 |
| Desktop rotation left / right, deg | 47 / 47 |
| Additional options |
|
| Developer/Production Location | Germany / China |
| price, rub. | 22890 |
Watch video from detailed description tool properties and a demonstration of it in action:
Editor's Choice
The most attractive tool in the “middle” category is the Ryobi EMS254L, which, at a relatively low price, is equipped with many features that maximize the quality of parts processing.
11. Bosch GCM 8 SJL Professional - from 35150 rubles.
A tool from a well-known German manufacturer, designed for processing small sections. With a small diameter of the saw blade, it is equipped with all the functions necessary for high-quality processing of workpieces. The tool is equipped with additional options for the convenience of work - slotting depth limiter, work table extensions, two-point waste disposal system, which effectively ensures the cleanliness of the working area.
| Characteristics | Meaning |
|---|---|
| Power, W | 1600 |
| Number of revolutions, rpm | 5500 |
| Disc diameter, cm | 21,6 |
| Maximum cutting depth, mm | 70 |
| Maximum cutting width, mm | 312 |
| Weight, kg | 17,3 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 47 / 2 |
| Desktop rotation left / right, deg | 45 / 45 |
| Additional options |
|
| Developer/Production Location | Germany / Taiwan |
| price, rub. | 35150 |
Watch video from overview tool characteristics:
12. Dewalt DWS 780 - from 57940 rubles.
A tool from an American developer. The main function that greatly facilitates the work with parts made of different materials is the adjustment of the number of revolutions. The broach function and disc diameter allow you to process parts of large width, and the function of cutting depth adjustment makes it possible to work with workpieces of complex shape. Distinctive feature model is the ability to control the cut line using the XPS system, which provides higher accuracy compared to laser marking.
| Characteristics | Meaning |
|---|---|
| Power, W | 1675 |
| Number of revolutions, rpm | 1900-3800 |
| Disc diameter, cm | 30,5 |
| Maximum cutting depth, mm | 112 |
| Maximum cutting width, mm | 349 |
| Weight, kg | 24,8 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 49 / 49 |
| Desktop rotation left / right, deg | 50 / 60 |
| Additional options |
|
| Developer/Production Location | USA / Italy |
| price, rub. | 57940 |
Look detailed video an overview of the properties and characteristics of the tool with a demonstration of it in action:
13. Makita LS 1216 - from 49390 rubles.
A tool from a Japanese developer. It is distinguished by the presence of the function of maintaining revolutions under load, which guarantees high quality cuts. Broach and large diameter disc allows you to cut workpieces with a width of more than 350 mm. Double guides on linear ball bearings ensure perfect cutting accuracy on wide workpieces when broaching. The cutting parameters are set using the locking screws. The angles of rotation of the working table and the inclination of the working head are fixed with an accuracy of half a degree. The electrodynamic brake of the engine, protection against accidental inclusion, a casing on a working disk guarantee safety of work.
| Characteristics | Meaning |
|---|---|
| Power, W | 1650 |
| Number of revolutions, rpm | 3200 |
| Disc diameter, cm | 30,5 |
| Maximum cutting depth, mm | 107 |
| Maximum cutting width, mm | 363 |
| Weight, kg | 26,1 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 45 |
| Desktop rotation left / right, deg | 52 / 60 |
| Additional options |
|
| Developer/Production Location | Japan / UK |
| price, rub. | 49390 |
Watch a video with a detailed analysis of the features of the tool:
14. Metabo KGS 254 Plus - from 44690 rubles.
Tool from a German manufacturer with big power. It includes the function of adjusting the number of revolutions, which allows you to work with parts from different materials. In addition, the saw is equipped with a cutting depth adjustment function for processing complex-shaped workpieces. Soft start and the function of maintaining speed under load ensures maximum precision in cutting parts. The tool is ergonomic and easy to use, all processing parameters of workpieces are set using simple, intuitive adjustments for the user.
| Characteristics | Meaning |
|---|---|
| Power, W | 2000 |
| Number of revolutions, rpm | 3900-5150 |
| Disc diameter, cm | 25,4 |
| Maximum cutting depth, mm | 90 |
| Maximum cutting width, mm | 305 |
| Weight, kg | 24 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 46 / 46 |
| Desktop rotation left / right, deg | 47 / 60 |
| Additional options |
|
| Developer/Production Location | Germany / Germany |
| price, rub. | 44690 |
Watch a video with a brief overview of the features of the tool:
15. Hitachi C10FSH - from 47,999 rubles.
A tool from a Japanese manufacturer, equipped with a full range of functions for high-quality processing of parts in construction or furniture manufacturing. The broach function and disc diameter allow processing workpieces with a width of more than 300 mm. Soft start, which reduces the kickback force when starting the engine, and the function of maintaining speed under load guarantee a high quality saw cut. The tool is ergonomic and comfortable to use.
| Characteristics | Meaning |
|---|---|
| Power, W | 1090 |
| Number of revolutions, rpm | 3800 |
| Disc diameter, cm | 25,5 |
| Maximum cutting depth, mm | 90 |
| Maximum cutting width, mm | 312 |
| Weight, kg | 19,5 |
| Functions and features |
|
| Tilt of the head to the left - to the right, deg. | 45 / 45 |
| Desktop rotation left / right, deg | 45 / 47 |
| Additional options |
|
| Developer/Production Location | Japan / Japan |
| price, rub. | 47999 |
Watch a video with a brief overview of the features of the tool:
Editor's Choice
The most attractive tool for professional builders is the Makita LS 1216, equipped with a set of features that ensure high-quality processing of parts. The tool fully meets the criterion "price + quality".
Very often when doing finishing works It is necessary to carry out diagonal cutting of the material with high precision. For these purposes, a special tool should be used. It is a miter saw with a broach that is able to accurately and quickly cut the product at any inclination and angle. The features of choosing a tool and its main advantages are described in detail in this article.
A miter, pendulum saw for wood and metal, or an angle cutter, is a stationary, highly specialized cutting tool that is used to cut materials at a certain angle. This possibility is provided by a turntable and a movable working part with a disk above the bed. The miter saw can process narrow wood products in the form of slats, bars and boards. It can also be used for cutting hardboard, laminate and OSB. The tool does a good job of cutting plastic, aluminum profile and stucco decoration made of polyurethane.
Due to its high speed, precision and ease of operation, the miter saw has a wide range of applications. It is used for carpentry, assembly and finishing work related to the use wooden products. The tool is indispensable in workshops for the manufacture of furniture, where it is necessary to perform accurate and high-quality cutting of products.
Exist universal tools, which carry out trimming for metal. Thanks to a special disc, the tool is used to cut metal products made of steel, iron and cast profiles. Such end saws for metal are widely used in enterprises that manufacture window frames from a metal-plastic profile.
Important! Do not mount a diamond or abrasive wheel instead of a saw blade.
In the technical documentation of each specific model the limiting parameters of the product that the tool can handle are indicated. Miter saws of small sizes carry out sawing of products up to 60 mm thick. A tool of medium dimensions will cope with workpieces with a thickness of 70-80 mm. Large-sized saws are used to process products with a thickness of 100 mm or more.
Important! Miter saws cannot be used for processing stone, ceramic and ferrous metal products.
Miter saw with broach: design features of the tool
The miter saw for wood has quite simple design, which includes a saw blade, a motor with a gearbox, a base and a handle with a start button. The saw motor can be commutator or asynchronous. The first option carries out a greater number of revolutions, does not need regular maintenance, but only requires a periodic change of brushes. And the second one is much quieter and more durable. In the classic version of the device, the engine is located to the right of the disk. However, there are improved models where it is placed at the back, which increases the viewing angle during cutting, thus being more convenient to use.
The rotation of the saw blade is carried out due to the operation of the engine, which transmits a gear or belt drive through a gearbox. During operation in first gear, the possibility of slipping of the product is excluded even at high engine loads. Second gear provides less noise and reduces disc vibration. And this has a positive effect on the quality of work and on the service life of the tool. However, in such devices, the belt wears out quickly, which can also come off with a sharp change in speed. There are more reliable and durable models that differ in direct transmission. However, their torque is significantly lower than analogues.
To expand the capabilities of a conventional miter saw, a broaching mechanism can be built into it. In this case ordinary saw turns into a wood trimming machine. In such models, the functional module is installed on two rails, which are parallel to each other. This design allows the saw blade to move freely during cutting, which allows cutting wider products.
The functional module is fixed on the frame. This base is a movable round part that can move when setting the angle and stop. The miter saw frame is usually made of magnesium or aluminum alloys. The design of the saw includes a protective casing, which is put on the circle during the downtime of the device in order to avoid injury.
Stand, saw table and additional stops
One of the main and complex elements The coal cutter for wood is a saw table. On the one hand, a stand is attached to it, on the other hand, a disc moves above the neck. Drawbar saws have a much longer neck. At the end of the device is a clamping handle, which serves to fix the table relative to the base, and a push-lock, used to quickly adjust the most running angles.
Angle scales are located on the table and stand, which indicate the angles of rotation and inclination. The table can be rotated in both directions from 0 to 45 degrees. And securely fixed in the selected direction using a special groove with a latch.
The rack can be fixed or tilted to the left by 45 degrees. A tool with a right-angled stand is extremely rare, which is explained by the need to significantly complicate the design of the saw. In addition to the main graduations, several special ones can be provided, which make it possible to choose the optimal angle for cutting skirting boards and moldings.
For reliable fixation of workpieces of any size, built-in clamps and various stops are used. When working with long products, using folding or retractable stands, which are located on both sides of the frame, you can expand the dimensions of the base. Such additional stops are usually included with the miter saw. They are represented by U-shaped steel rods, bent up to the level of the table.
There are more complex structures bases with cast stands, which are fixed relative to the support with wing screws. Many manufacturers equip miter saws, the price of which will not be much higher than classic tools, with separate racks or special tables. They can be placed at some distance from the tool, depending on the length of the products.
Basic and additional trimming options
All devices are equipped with a soft start, which allows you to block the mechanism during the replacement of the circle, and accordingly stop the engine. All models of miter saws have protection against breakdown of the case by electricity.
The classic version of miter saws does not provide for the presence of electronic elements. However, there are models, usually miter saws for metal, which are equipped with an electronic speed control function. This feature provides more precise control over the progress of the job. It is also possible to configure the equipment for cutting various materials.
Helpful advice! For cutting hard rock wood, it is advisable to use a saw with electronic engine speed control.
New models are being produced in which it is possible to set a certain stable speed. This is useful when you need to complete several blanks in a short time. Indeed, with strong pressure, the speed of the device decreases. At this time, thanks to the electronic controller, a certain speed range is set, which allows you to get a smooth and fast cut.
Another useful but expensive feature that adds to the cost of the tool is laser pointing. It can be powered by mains or battery. In the first case, a switch is located next to the handle on the tool body. The beam traces the cut line, which is especially valuable for an inexperienced craftsman who has not developed intuitive cutting skills with a miter saw. The trimmer can also be equipped with a powerful LED backlight, which is placed behind the disk. When it is turned on, the shadow from the disk falls on the workpiece, forming a kind of illumination.
During the operation of the tool, a large number of wood dust and sawdust. To prevent their spread throughout the room, some models are equipped with a nozzle for connecting a vacuum cleaner, through which debris is removed directly from the place of its formation. Modern models provide for an extension of the countertop by 50 cm or more, which allows you to work with long products, such as laminate.
The main criteria for choosing a miter saw for wood with a broach
Before choosing a miter saw, you should study its main parameters. The main criterion is the purpose of the tool. If the use of the saw is planned in rather rare cases for domestic purposes, then it is enough to buy a miter saw with a standard set of functions. For frequent use of the tool for cutting workpieces of various widths, it is advisable to purchase a universal miter saw with a broach, which expands the range of tool capabilities. It is the broach function that is used to work with a material of rather large thickness and allows you to increase the cutting width, the indicator of which is not very large for conventional models, which in turn expands the functional range of the tool.
Helpful advice! In the case of a single or rare use of the tool, you can make a mobile and collapsible miter saw with your own hands from an ordinary grinder and improvised tools and materials.
The next criterion is the safety of the device. Despite the cost of the tool in its design, a protective cover and an option to block accidental start-up of the device must be provided. When choosing a tool, it is necessary to take into account its dimensions and weight. It must be mobile and ergonomic in order to work with the saw as comfortably and easily as possible in certain conditions. For work at height, it is advisable to use a small and light tool, which will not necessarily have less power than a large, heavy miter saw.
Important! Professional models are more powerful, which is reflected in the weight and dimensions of the device.
The width and depth of the cut determines the purpose of the tool, namely, it indicates what can be processed on it. For high-quality work, you should choose a saw blade with a diameter of at least 20 cm. The larger this indicator, the easier it is to work with the tool. When choosing a specific model, one should take into account the quality of the material from which the swivel block and bed are made.
Choosing a saw blade for a miter saw
The quality of the cut depends on the characteristics of the miter saw and the cutting piece. Saw blades are distinguished:
- according to the shape of the teeth;
- along the outer diameter;
- by mounting hole.
The mounting hole or internal diameter of the disc is usually 3 cm. The value of the external diameter can be 21, 25 or 30 mm. This indicator is indicated in the characteristics of the tool and on the front surface of the disc. When choosing the parameters of the cutting product, you should pay attention to the engine for which a specific disc size is selected. For powerful engines it is impractical to use large disks. As a result, you can get a poor-quality and sloppy cut.
Related article:
Descriptions and manufacturing techniques useful structures for arranging a garage workshop, recommendations.
The larger the value of the outer diameter, the more teeth are located on it, and therefore, the load on each of them is less. This suggests that larger drives have a longer lifespan. It is advisable to use discs with a small number of teeth for a longitudinal cut, with a maximum for a transverse one. On the surface of any disc, its marking, maximum rotation speed, direction of rotation and compatibility with the tool are indicated.
It is necessary to choose, descending from the power of the tool
Helpful advice! For high-quality and durable operation of the disk, the proportionality of its size and thickness must be observed. Otherwise, frequent breakdowns of the part are inevitable.
The design of the teeth of the saw blade for wood
The quality of processing products is affected by the size, sharpening, geometry and material of manufacture of the teeth of the disk. The smaller the size of the teeth, the better and more accurate the cut is. This is especially important for laminate and lacquered or painted wood. For rough processing, discs with a small number of large teeth can be used. They are used for cutting plywood and softwood.
For processing plastics and composites, it is better to choose discs with trapezoidal teeth or triple chip brazed. For hard woods, it is advisable to use products with carbide-tipped teeth made of tungsten carbide or cobalt alloy. For chipboard cutting, plywood and veneer discs with ATV soldering are most preferable.
Helpful advice! To obtain a high quality cut in valuable wood products, combined discs should be used, where several beveled teeth alternate with one cleaned one.
The geometry of the teeth indicates the nature of the cut. Depending on this, discs are distinguished for longitudinal, transverse cuts or for finishing and accurate processing. Some discs for long work have thin cuts and smooth lines, due to which the temperature deformation of the wheel is compensated and the noise level during the operation of the tool is reduced. The surface of the teeth should be smooth, without nicks, and the edge should be sharp enough. Discs are made of heat treated steel with composite overlays.
Power and RPM
When choosing a saw, you should pay attention to its power and the speed of the cutting part of the tool. These parameters are closely related. The greater the power of the device, the higher the frequency of rotation of the dusty disk.
The service life of more powerful devices is slightly longer than that of analogues with a lower indicator. The standard power value is 1.6 kW. This value is quite enough to perform any kind of tasks. However, many modern models have a power of 1.8 kW. But this directly increases the weight of the unit and complicates the work with the tool. In addition, powerful models require good wiring so that during operation of the saw there are no short circuits and there are no power outages.
The number of revolutions that the disc makes affects the quality of the cut. The larger this value, the neater and cleaner it will turn out. Modern models have a built-in function for adjusting the number of revolutions, which is convenient for processing a specific type of material.
Rating of miter saws from well-known manufacturers
One of the important parameters when choosing a miter saw is trademark. Units from different manufacturers may have the same characteristics while significantly differing from each other. This is due to the fact that each manufacturer uses different materials, their own technologies and assembly options. Depending on this, the price of trimming can vary significantly.
Also, the cost of the tool is affected by the fame and vocation of the manufacturer. It happens that professional models of little-known brands will cost on a par with the simple performance of equipment by a famous brand. Also, the price of a saw blade from a well-known manufacturer can be equal to the cost of an inexpensive miter saw.
When choosing a tool, keep in mind that budget models usually have a simple disk designed to work with soft wood. Universal disks put on devices high level. Discs for working with hard wood, plastic and metal are usually purchased separately. Budget models can be used as training devices for jobs where high precision and cutting quality are not required. They are suitable for building a house or erecting a fence.
When the device is faced with a serious task that requires high precision and level of performance, then it is better to purchase a more expensive miter saw. For permanent operation, preference should be given to high-quality professional equipment.
Among the well-known manufacturers of miter saws, the following brands can be distinguished:
- Bosch;
- Makita;
- Metabo;
- Hitachi;
- DeWalt.
Trimming Makita: an overview of tools of different classes
The first in the ranking of manufacturers of miter saws is Makita. Building tools from a world-famous manufacturer are characterized by an increased degree of safety and high quality of every detail. Due to the presence of a traction function in most models of the brand, it became possible to independently select the cutting width.
At the base of the tool there are two rods on which a surface is installed to accommodate the working block. An example of such a small table with basic equipment is the budget model Makita LS 0714. The tool can perform oblique, inclined and combined cuts at an angle of up to 45 degrees. to the right. The engine power is 1 kW. The cost of a miter saw is about 25 thousand rubles.
Among professional miter saws, the Makita LS 1216 model can be distinguished. This best tool for carpentry workshops, which is designed for wood and plastic work, where high quality cuts are required. This is achieved thanks to the double guides, which allow the saw to move evenly, ensuring a smooth cut. Engine power is 1.65 kW. The tool is capable of cutting up to 107 mm deep and up to 363 mm wide, which is the maximum for devices of this class. The cost of installation is an average of 45 thousand rubles.
The disadvantages of the miter saw include a rather large weight, which complicates the use of the tool as a portable one. It's better to use it like stationary machine. The saw does not include a laser pointer and illumination, but they can be purchased separately. There is also no way to adjust the number of revolutions.
Among the best universal miter saws is the professional model Makita LF 1000. Its design is complemented by special folding stands that greatly simplify the work with the tool and expand the range of its capabilities. This tool is used for longitudinal, transverse, oblique and angular cuts in wood, aluminum and plastic. Engine power is 1.65 kW. It generates high torque, which allows it to process hard materials. The model is also equipped with a speed control function, which allows high-quality cutting of material of any hardness. The price of the instrument is on average 53 thousand rubles.
Bosch miter saws
Bosch has established itself as one of the leaders in the production of high-quality specialized tools. Miter saws of the world brand are equipped with a special circle, a bed, thanks to which you can adjust the cutting angle yourself. The most reliable and durable are the beds made of pure aluminum and magnesium alloy. Such circles not only provide a safe and comfortable cut, but also have a small weight, which makes the saw mobile and easy to use.
The Bosch PCM 7 model is considered the best Bosch trimmer in the category of budget tools. This a good option for a novice master or for infrequent performance of simple tasks. The working unit can be fixed on the table, which makes it easier to work, making the cut more accurate and accurate. Engine power is 1.1 kW. The model is equipped with a laser for a more accurate cut. The miter saw has a small diameter blade, which limits its range of possibilities. You can buy trimming for only 11.5 thousand rubles.
As a professional device, you can choose the Bosch GCM 8 SJL Professional miter saw. The model is equipped with a large number of settings, which allows you to set the required parameters for fast and high-quality cutting of wood and plastic products, which are coated with decorative coating. Engine power is 1.6 kW. There is no speed control function. A laser pointer is provided for precise cutting. The tool is equipped with a reliable dust collection system. The cost of the saw is 32 thousand rubles.
Miter saws Metabo
Miter saws manufactured by Metabo have a unique property. Here there is the possibility of arbitrary inclination and rotation of the disk. This allows you to work in hard-to-reach places without worrying about the quality of its implementation. This possibility is carried out thanks to a special regulator, which is located near the desktop. Some models of this brand are equipped with special projectors that create a shadow from the disc. This feature allows you to cut as accurately as possible.
One of the most popular models from the German manufacturer is the Metabo KGS 305 miter saw. The tool is equipped with a broach, a reliable support platform, powerful engine 2 kW, convenient levers for adjustment. Disc with a diameter of 305 mm provides high performance devices. The maximum tilt angle reaches 47 degrees, the rotation angle is 60 degrees. The tool is able to perform a high-quality and accurate cut of products of any hardness. Can handle even wooden beam 100x100 mm. You can buy a miter saw with a broach for 26 thousand rubles.
Another no less popular model with a broach is the Metabo KGS 216 M miter saw. The tool is ideal for a novice craftsman and belongs to the category of amateur devices. The miter saw is equipped with a bright LED and a laser guide. The power of the brush motor is 1.2 kW. The maximum cutting width is achieved at an angle of 45 degrees. and is equal to 205 mm. The price of the device is 19 thousand rubles.
Miter saws for metal and wood DeWalt
A professional range of miter saws is produced by DeWalt. Models of this brand are characterized by the presence unique system XPC, which allows you to project a shadow from the disk onto the product, which ensures accurate and high-quality cutting of any material.
One of the popular models is the DeWalt DWS 780 professional cut-off saw for wood and metal. Rigid and stable design makes work convenient and safe. Thanks to the presence of a large disc with a diameter of 305 mm, it is possible to work with wide workpieces. Engine power is 1.65 kW. Thanks to the belt drive, a quieter operation of the saw is ensured. The device has a speed control function, which allows for high-quality cutting of products of any hardness. Maximum cutting accuracy is ensured by built-in lighting, which, in comparison with laser pointer not clogged with dust. The cost of the tool is 53 thousand rubles.
Another combined cut-off saw for metal and wood is the DeWalt DW 717 XPS model. The design of the tool is thought out to the smallest detail. Here you can set not only the cutting angle, but also set required depth with millimeter precision. This is especially important for furniture makers and builders, where precision work is required in the processing of products. The motor power is 1.65 kW, which is the most suitable for cutting hardwood, plastic and aluminum. To create a better cut, the device has a system for controlling the speed of rotation. The model is equipped with a cooling function that acts on the entire power unit. The price of a miter saw is 52 thousand rubles.
Other manufacturers of trimming wood and metal
Miter saws Interskol from Russian manufacturer are characterized by a simple design, which consists of a base, a saw blade, a motor and a handle with a start button. To cut at a certain angle, you just need to turn the disk or table. The disk can turn both to the right and to the left.
A popular budget model is the Interskol PTK-216/1100 P miter saw, which is designed for efficient processing of workpieces from different materials. Thanks to the saw blade with a diameter of 216 mm, complex cuts can be made at an angle of up to 45 degrees. round trip. The maximum cutting depth is 58 mm, the width is 133 mm. Thanks to a motor power of 1.1 kW and a disc speed of 5000 rpm. creates a smooth and clean cut. For additional safety, the device is equipped with a braking system. The price of the saw is about 11 thousand rubles.
Another popular electric saw for metal and wood is the universal model Interskol PTK 250/1500 with a power of 1.7 kW and a saw blade size of 255 mm. Thanks to the wide top work table, the tool can be converted into circular saw for cutting products up to 40 mm thick. The tool can perform not only through, but also deaf cuts. The cost of the saw is 16.5 thousand rubles.
Miter saws from the Chinese manufacturer Hitachi are distinguished by high accuracy in cross-cutting wooden products at a given angle of up to 45-47 degrees. The tool is widely used in the production of window frames, installation of platbands and skirting boards.
The most popular classic model is the Hitachi C10FCH2 miter saw. When trimming panels, skirting boards and profiles, it simultaneously trims the edges of the products. The saw is equipped with a laser pointer and an electronic cutting speed control system, which allows you to get a neat and even cut. For bevel, combination and angle cuts, the saw blade can only be tilted to the left up to 48 degrees. the table can be rotated in both directions up to 52 degrees. You can buy a tool for 12 thousand rubles.
Important! This model is not suitable for working with metal.
Another budget option is the PIT miter saw. The tool has a fairly simple design and is easy to use. When making preliminary settings, the saw will cut the same type of parts at an angle of up to 45 degrees. within minutes. The cost of the instrument usually does not exceed 9 thousand rubles.
Choosing a miter saw is a very serious and responsible undertaking. To pick up quality tool By affordable price First you need to decide what tasks it will perform. After that, you should carefully study the characteristics of the selected option and only then make a final decision.
