We have prepared for you interesting master class. If you are a fan of weaving balloons or strands of beads, this idea will definitely come in handy: with the help of a bead spinner, you can quickly collect the required number of beads on a thread.

We will tell you how to make a spinner yourself. Try it homemade spinner before purchasing an expensive mechanical device. You will appreciate the ease of use.

Material for production

To create a spinner for stringing beads, you can easily find the material you will need:

round lid with a flat bottom and high sides (at least 2.5 cm) or a plastic cup from yogurt, sour cream;
regular ball pen without rod;
scissors;
candle or lighter;
ruler.

Having prepared required material, we can start assembling the bead spinner.

Process of creation

It’s great if you use a lid to create a bead spinner, this will reduce the creation time, because it’s already the right size, the required height, flat, with smooth edges. And if you took a jar as the material, then you will need a little time.

Take your plastic cup and use a ruler to measure 2.7 cm from the bottom. Make marks on several sides and connect them together. Optimal height 2.5 cm, but take a couple of millimeters in reserve, because we will singe the edges of the cup.

Take scissors, it is better to use small manicure scissors with sharp tips. Cut the bottom of the cup exactly along the line.

To prevent the part from clinging either during the process of creating a spinner for beads, or during subsequent work with the product, light a candle and scorch the edges of the cut part. You can use a lighter, but a candle is more convenient for this step; it does not need to be held by the flint or button.

The rod with which our spinner will spin will be the handle. Take the ink out of the pen. Turn the bottom of the cup over and mark the center on it. At this point you need to cut out a circle in which the shirt of your pen will fit tightly.

The handle should fit tightly, there should be no gaps so that beads do not fall there. When inserting the handle, unscrew the head. Insert the handle into the cut-out hole and secure with the head by screwing it in from the reverse side.

If it seems to you that the handle is loose, use hot glue and glue the handle to the bottom on both sides.

Check how your spinner spins; it should work like a spinning top.

Here's how to make a bead spinner, quickly and easily from the most available materials. But how to use it?

Principle of use

To use a bead spinner, fill it with enough small beads. There should be a lot of them, but not to the brim - 2/3 of the container. A large number of beads can scatter, and small beads are difficult to collect. If you don't have much of it, it's better to make several spinners different sizes. For example, from a wide sour cream cup and a small plastic one for drinks. This way you can always quickly collect beads, they will not fly apart or scatter across the huge bottom.

Take a fishing line or wire, attach the end to the beads with your left hand, and twist the spinner by the handle with your right hand. Hold the wire at a slight angle. Rotate the spinning top gently and slowly, so the beads will be carefully strung on the wire and will not scatter into the corners of the room. All you have to do is twist the rod and periodically move the chain of beads further.

In just a few minutes you will have a long garland of beads.

Advantages

A bead spinner has a number of significant advantages, for example:

simplicity - the spinner works simply, the simple mechanism does not require effort;
saving time - a chain of beads is assembled very quickly, tens of times faster than if you put one bead on the wire;
convenience - you don't have to bend your back over your desk while typing, you don't have to strain your eyes, and you don't have to good lighting to quickly and easily cast on a long row of beads.

This is such a wonderful master class, we hope you find it useful. This simple device can be created in a few minutes and greatly simplifies the process of setting beads on fishing line, thread or wire.

If you like to crochet balloons or strands of beads, then the process of placing beads on a thread cannot be called creative and inspiring.
But sometimes you have to collect several meters of beads onto a thread.
What to do? How to make your work easier?

They come to the rescue spinners - special devices, helping to collect beads.
They can be semi-automatic, i.e. manually driven, and automatic, battery-powered. Sometimes craftswomen call them spinning wheels.

Guide to using "SPINNER":

1. We pick up the special needle supplied with the “SPINNER” and thread the thread into the eye. Cut off the end of the thread and tie it in a knot or leave it on the spool.
2. Then we take the beads and pour them into the “SPINNER”, filling it halfway or a little more. We do not recommend filling the bowl to the brim, as the beads may scatter throughout the room.
3. We begin to rotate the metal rod of the device counterclockwise, holding it with a large and index finger left hand. You need to rotate slowly, very softly and smoothly.
4. Rotating the “SPINNER” rod with the fingers of your left hand, right hand place the needle in the bowl, with the sharp end “against the flow” of the beads. We try not to touch the bottom of the cup and do not hold the needle so that its tip is visible. The needle should be held semi-horizontally, you need to feel it, feel its movement in the mass of beads, choosing the correct inclination.
And then the beads themselves will be strung on the sharp end of the needle.
5. As soon as the beads fill the needle halfway, move the beads onto the thread and continue stringing.

Spinners can be purchased at handicraft stores.

For example, in the Ocean Beads store there is such a semi-automatic spinner 450 rubles.

This spinner is already available at Walmart 37.99$

How to make a bead spinner yourself.

That's why we are needlewomen, because we can do everything with our own hands!
Here are some master classes.

Spinner is new funny toy, which appealed to adults and children. It appeared in America last year and in a short time gained enormous popularity. The principle of operation of the toy is simple: with the middle and thumb of one hand we grab the central bearing. With the other hand we activate the wings of the turntable. With sufficiently good control skills, you can operate the toy with one hand. Use your index finger and thumb to grasp the center bearing. The hand spinner consists of three parts: a housing, a bearing and a plug.

Advantages of a spinner

Hand motor skills develop, fingers become more sensitive. This tool will be very useful for those who have suffered various hand injuries.
This is a kind of anti-stress toy that calms the nerves. In addition, thanks to it, you can concentrate, restore efficiency, relieve anxiety and nervousness, and also become less irritable.
The spinner will be an excellent companion during a long trip; it can be a great way to occupy your free time.

LED spinner on the controller

Some people buy them, while others make them themselves. Here circuit diagram spinner with LEDs controlled by a microcontroller. When rotating, all sorts of pictures and signs are created.

Project Parts List:

MK ATtiny-45
5 smd led (1206)
5 smd resistor (47 ohm)
1 battery 16 mm (3 V)
22mm diameter bearing
A piece of wood or plastic

As you can see, the scheme is simple, but if anyone doesn’t understand something, study the datasheet from Atmel.

The positive LED leads go to PB0 - PB4 on the MK. To limit current, resistors are added between them. The negative contacts of the LEDs go to minus - GND.

Possible different variants displaying figures, so a browser page is made to create image sequences for the spinner. In the general file, the link to which was above, you will find the drawing, firmware and program.

Spinner with ball bearings

This spinner consists of a housing on bearings and a plug. The center bearing is the most important. The speed and time of rotation of the spinner depends on its quality. The plugs are inserted into the central hole.

One of the most accessible means at hand is paper and cardboard. A hand spinner is made from paper using a knife, four bearings, and glue. First you need to make drawings. Using a utility knife, cut out pieces from paper or cardboard. The holes for the bearings are cut with nail scissors or a knife. It is important to ensure that their diameter is slightly smaller than the diameter of the bearing. This is necessary to ensure that the bearings fit tightly into the holes. The number of parts depends on the width of the bearing. Gluing requires a lot of glue. it will give the product greater strength. After finishing the work, we paint the toy in any color.

To increase the moment of inertia, it is necessary to provide weights. The most simple option are coins glued to each other. For 10 mm plywood, you need to glue 8 ten-kopeck coins together. Internal surfaces We level the workpieces using a drill. We carefully and quickly bring the outer surfaces to the contour using a grinder with a grinding wheel. We remove all remaining irregularities manually with sandpaper.

For those who know how to work with a jigsaw and drill, you can make a spinner out of wood. Wood is an environmentally friendly material. The product turns out beautiful and pleasant to the touch. First we choose durable wood. For beginners, it is better to use plywood. Working with wood requires skills. First prepare a drawing. You can come up with it yourself or simply print it from the Internet. Place the paper blank on the wood or plywood and trace it with a pencil. Cut out and sand the part with sandpaper. The hole can be cut out, but it is better to use a drill to make the hole even. Important point: Use a drill to make a hole halfway on one side, and then turn the part over. This way you have a better chance of getting the perfect hole for the bearing. The thickness of the wood or plywood should be exactly the same as the bearing. If it is a little larger, it needs to be sanded.

Typically, a bearing from skateboard wheels, rollers or scooters is used. They have standard size diameter 22 millimeters, width and inner diameter can be selected at your discretion.

After experimenting with sizes, we came to the conclusion that the ideal size for long-term torsion is 25-27 mm in diameter. At the same time, for a spinner it is better not to take bearings smaller than 20 and larger than 30 mm.

Finger spinner will be a savior for those people who bite their nails, pens, or the like during stress. The fidget spinner is designed to relieve stress, warm up your fingers, as well as concentrate your attention and develop hand motor skills. Such a device will become an indispensable thing for children and adults.

The surface of the materials can be lumpy or smooth, and you can find a variety of color options: white, black, red and many others. The size of the toy is small, which allows you to carry it with you. Unusual and stylish design can make a great accessory out of it.

How to make a spinner with your own hands

Why do you need a spinner from a store if you can make it yourself? The whole process of work will take a little time, and its design is simple. In order to start tinkering, you will need:

Textolite;

furniture ties;

bearings;

drill and drill bits for it;

ruler, compass.

First you need to take the PCB and cut out the base for the spinner from it. First, using a compass, a drawing of the toy is drawn, and only then it is cut out. Before you start drawing the base, you need to find out the size of the bearing, for example, it is 22 mm, so the compass needs to be inserted into the PCB at 11 mm and draw a circle. After this, insert a compass at 18 mm and draw another circle. An individual calculation is required for each case. This is easy to do, all the variety of options are presented on the Internet, there are also stencils for the spinner.

Then we start working with bearings. Each of them needs to be wiped with resin, after which they can be connected to the block. Only after this can you drill holes for the sleeves. To do this, you need to mark six sectors of the spinner. Each intersection point of sectors and circles is the center of the sleeves. You need to drill holes in each intersection, exactly six pieces. Then you need to drill out the center of the spinner.

Each sleeve must be sanded before being inserted into the hole. This is very simple to do; to do this, you need to insert it into the drill chuck and rub it against the sandpaper until all the paint is removed from them. Each of the sleeves must be lubricated with the same resin and pressed in.

After all the steps are done, the toy needs time to dry. This will require a minimum of six hours, after which you can enjoy playing with the hand spinner.

Video - the coolest spinners

Has your child succumbed to the popular fashion for spinning spinners? Is he asking for a red one, a yellow one, and also a luminous one in the form of a minion? In general, so that it’s not like everyone else? Then you can make a toy with your own hands. Moreover, such a labor lesson will keep both you and your baby busy. And if you still don’t know what a spinner is, there we answered all the popular questions about this modern, arch-modern fun.

We have put together three ways for you to make a spinner, two easy and one more difficult (you'll need your dad's help here). But we are sure that both tools and materials should be found at home or in the country. Each instruction is supported by a video tutorial found on YouTube for clarity. So, how to make a spinner out of paper, from plastic caps and made of wood?

Method 1. Spinner made of paper and cardboard.

Simple, cheap and not at all ugly - a paper spinner for beginner spinner makers. An older child can handle it on his own, a little one may need a little help, and the result can be proudly taken to kindergarten or school - where creativity is always held in high esteem.

What you will need:

Cardboard, marker and caps (or a ready-made template from the Internet)
Scissors
Nail scissors or awl
3 coins
Pen refill
Paints or glitter for decoration

Instructions:

Download a ready-made spinner template from the Internet. Or draw it yourself by tracing the lids from plastic bottle on cardboard. You need to cut two pieces of cardboard in the shape of a spinner.
Cut out four more smaller circles. You can circle a coin of a lower denomination.
Glue three coins of the appropriate size on the sides of one of the cardboard blanks.
Glue the other half on top of the blank with coins.
Using nail scissors or an awl, make a hole in the center of the spinner.
Cut about 1 centimeter off the shaft from the handle.
Punch holes in the center of two small circles.
You can paint the finished spinner blank in any colors or decorate it with sparkles, rhinestones or stickers with your child’s favorite characters. Everything is your choice and completely unique!
Insert a piece of dowel into one of the small circles and glue it around the edges of the hole.
Insert the circle with the rod into the center of the spinner and glue the second circle on the other side.
Glue the two remaining small circles on top of the ends of the rod. Ready! A spinner made of cardboard, without a bearing and with complete imagination in terms of design is sure to keep a child occupied for some time.

Source: PLASTILIN

Method 2. Spinner made of plastic caps.

This spinner will require a little more materials and diligence, but it will also last much longer. In general, a spinner made from Coca-Cola caps is something like crafts made from matchboxes for older generations. Dear consumables and soul-warming results with minimal costs for an actively functioning (that is, rotating) thing.

What you will need:

Plastic bottle caps
Kinetic sand or plasticine
Glue gun
Nail and lighter
Glue stick
Scissors
Toothpick

Instructions:

Place kinetic sand or plasticine into three bottle caps almost to the top. The main thing is to make the blades heavier.
Use a glue gun to fill the remaining space in the lids to the top.
Make a hole in the fourth (without sand) lid (you can use a heated nail).
Glue three lids with sand to the central lid with a hole.
Cut two pieces about 1 centimeter from the glue stick.
Break a toothpick in half. Place a piece of rod on one end (the toothpick should not stick out) and thread it into the center of the spinner.
Place the second piece of the rod over the tip of the toothpick on the other side. Ready! If you are very eager, such a spinner can also be decorated creatively - painted with paints (for example, acrylic) or pasted over with something positive. Or you can leave it as is, choosing interesting combinations of caps from bottled drinks.

Source: Feature of the Day

Method 3. Wooden spinner (with bearing)

Let's move on to the most labor-intensive method of making a spinner. You can’t do without parents here, but the result can be safely laid out on the desk along with purchased toys. Again, in terms of design, freedom for self-expression is provided. For those dads and children who are friends with a jigsaw and know how to find on shelves construction stores bearings and know which side to hold the drill on.

What you will need:

2mm bearing
Plywood sheet (5 mm)
Stack of coins
Scissors
Pencil
Hand jigsaw
Sandpaper
Template (or cardboard and marker to create it)
Clamp
Drill

Instructions:

Glue the template onto a sheet of plywood and mark the locations for future holes in each of the circles.
Drill holes in each of the three circles on the sides to make it easier to cut them out later.
Insert a jigsaw into the holes and cut them out.
Cut out the workpiece itself from a sheet of plywood and sand it with sandpaper.
You can paint the spinner any color you like.
Insert the bearing into the central circle; if it does not fit well, you can drive it in with a hammer.
Glue together a stack of coins for the inner circles. Start with a five-ruble coin (put it under the circle), then two-ruble coins, and on top again a coin with a face value of five rubles.
Do this for all circles. You can decorate it on top as you wish. Ready! Just think about the benefits of a homemade anti-stress toy: you had a good time together with your child, worked hard and saved on buying another plastic trinket. And it spins great!

Despite the fact that the peak of popularity of the anti-stress toy that was fashionable in 2016-2017 has begun to subside, many are still looking for ways to create an original little thing that will help them spend time not boring on long trips, long queues or difficult situations. life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - read more in our material.

What are spinners for and how do they work?

Each twist dismantles the individuality of its owner.

Fidget spinner is a rotating flat or three-dimensional toy that is popular among adults and children around the globe. Its main purpose is to occupy and distract . Some people think that spinner is useful , because thanks to him you can distract from everyday and psychological problems, relieve irritability, get rid of anxiety. Others claim that thanks to the turntable you can focus on the right things, distracting from everything unnecessary. Be that as it may, the fame of the toy does not need explanation, because literally everyone loves it.

There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on what is available in stock component parts. To understand the specifics of the work when creating a spinner with your own hands, you need to know just a few important points.

Mandatory traditional elements spinners are:

bearing;
wings.

The most important part of the spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its sound and vibrations. In many homemade toys bearings are often replaced with primitive toothpick designs , which also allow the toy's wings to spin.

Popular articles:

Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas and show individuality.

Unusual design one of the most primitive forms of a toy - round.

The so-called twisters made from plastic, metal, wood, cardboard and many other materials. Often materials are combined. IN Lately plastic or metal toys with glowing wings.

Products made of plastic, wood and copper.

The design of many hand-made spinners is amazing. Many people decorate their toys with interesting engravings, illustrations, and icons. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.

Spinner in the shape of a Snitch.

Fairy-tale illustrations and details look very interesting on spinners.

Men's pinwheel design.

Lately, glow-in-the-dark toys have become very popular.

Fidget spinners in women's design.

Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But to stand out from the crowd, you need to make a certain effort, for example, make an original thing with your own hands for yourself or your child, relative, friend (for example, as a gift). If a child asks for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with creating a memorable toy.

General instructions before starting work

Before you start working on your spinner, you need to have an idea of what exactly a person wants to get as a result. To ensure that the result does not disappoint, you need to work according to a simple scheme.

Stage No. 1 - selecting a model and design

Since there are countless possible models of spinners, and we are all different, and we like different things, then to begin with, you can choose the appropriate model from the simple ones. This is necessary so that the process does not turn into punishment. Or you can go the other way and choose the most original model from a special material unusual shape. This option is suitable for those who have already tried to create things with their own hands.

Options for creating a hand spinner with your own hands.

Stage No. 2 - draw and draw

For everything to work out, you should take care of the drawing on a scale of 1:1. You can draw the future spinner model on paper, or you can search for ready-made drawings on the vast expanses of the Internet.

Drawings and blanks.

Stage No. 3 - prepare tools

Now that the creator has decided on the design, and schematic illustration done, you can start preparing all the necessary materials.

The first step is to purchase (or withdraw from old technology) bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it ends up in the toy. Why clean the bearing from grease? It makes the rotation slower, and also gets your hands, clothes and furniture dirty.

In addition to the spinner assembly parts, you will also need the following tools:

Construction marker (pen, pencil, regular felt-tip pen);
Scissors;
Stationery knife;
Elements decorative finishing(optional);
Glue;
Special tools for creating the wings we need (tools for working on wood or metal).

Preparatory stage.

Stage No. 4 - creating a spinner

When the preparation is complete, you can safely start making the toy with your own hands. Next, we will consider several popular options for creating spinners from various materials in several ways.

Varieties of hand twisters made from improvised means.

Spinner made of paper and cardboard without bearing

The most popular option for those who are in no hurry to run for a bearing and cut out squiggles from metal or wood is to make the first simple spinner from cardboard and paper. It’s really not difficult to do this with your own hands, and if you show a little more imagination, then a simple cardboard can turn into an original canvas for your favorite icons or drawings.

Tools for work:

ruler;
compass;
pencil;
pen;
scissors;
stationery knife;
cardboard;
glue;
toothpick;
nut - 2 pcs.

You can watch the step-by-step process in the video:

Using plastic covers

Another simple way to create a spinner with your own hands, which will take a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here's a little step-by-step instructions.

Tools for work:

caps - 4-6 pcs.;
plasticine (you can use kinetic sand);
glue gun;
glue stick;
lighter;
awl;
stationery knife;
toothpick;
scissors.

Progress:

Fill three lids (or more if the spinner has more wings) almost to the top with plasticine. We secure it with a layer of glue from a gun, which should fill the lids to the top.
The main cap remains without filler. We make a hole in it with an awl in the very center. We glue the lids with plasticine on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
Take a glue stick and cut off two equal parts - about 1 cm each.
We break the toothpick in the center. We insert it into the central cover and attach pieces of silicone rod to the ends so that it is convenient to hold the piece of wood.
Your DIY spinner is ready!

Wooden with bearing

A wooden spinner is the most pleasant and affordable option, which you can create with your own hands. The real lesson labor for adults and children!

Tools for work:

Glue gun;
Bearing 2 mm;
Plywood sheet, thickness 5 mm;
Several coins;
Drill;
Hand jigsaw;
Clamp;
Scissors;
Sandpaper;
Pencil or construction marker;
Ready-made spinner template.

Progress:

Print out the diagram and cut it out. We fix it on plywood sheet and circle it. It is necessary to mark the places in each of the circles where there will be holes.
We drill additional holes on the sides of the circles with the door, allowing us to cut out a beautiful circle shape from the inside of the wing.
The future spinner needs to be cut out of plywood with a jigsaw. Then carefully sand the edges and surface until the surface is smooth.
The bearing must be inserted into the hole prepared for it in the center. If you have difficulty, you can use a hammer and hammer the metal element into the wooden one.
The wings of the “spinner” need to be weighted down—for this you will need coins. You can glue the weights for each hole in the following order: a coin with a face value of five rubles, then two, and again five, as shown in the video.
You can cover it with a solid color paint, or you can decorate it with another interesting and in an original way- there is room for imagination, which is so nice to realize with your own hands.

Video tutorials on creating spinners

To get comfortable with creating a spinner with your own hands, you can watch some video tutorials on this topic. The conditions for creation can be very different, as well as materials and styles, but a homemade spinner can turn out no worse than a factory one.

Here's another way to create paper twisters, this time in the shape of shuriken :

Minimalistic spinner made of bearings and clamps:

And here great option“turntables” for girls: