Doors from the massif on individual. Solid wood doors to order. Manufacture of interior doors. The best wooden doors and types of wood

POLICY REGARDING THE PROCESSING OF PERSONAL DATA

I. GENERAL PROVISIONS

The personal data processing policy (hereinafter referred to as the Policy) was developed in accordance with the Federal Law of 27.07.2006. No. 152-FZ "On Personal Data" (hereinafter - FZ-152).

This Policy defines the procedure for processing personal data and measures to ensure the security of personal data of IP Korol K.K. (hereinafter referred to as the Operator) in order to protect the rights and freedoms of a person and citizen in the processing of his personal data, including the protection of the rights to privacy, personal and family secrets. The following basic concepts are used in the Policy:

Automated processing of personal data– processing of personal data using computer technology; Blocking of personal data - temporary suspension of the processing of personal data (unless the processing is necessary to clarify personal data);

Information system of personal data- a set of personal data contained in databases, and information technologies and technical means that ensure their processing;

Depersonalization of personal data- actions, as a result of which it is impossible to determine, without the use of additional information, the ownership of personal data by a specific subject of personal data;

Processing of personal data- any action (operation) or a set of actions (operations) performed using automation tools or without using such tools with personal data, including collection, recording, systematization, accumulation, storage, clarification (updating, changing), extraction, use, transfer (distribution, provision, access), depersonalization, blocking, deletion, destruction of personal data;

Operator - government agency, a municipal authority, a legal or natural person, independently or jointly with other persons organizing and (or) carrying out the processing of personal data, as well as determining the purposes of processing personal data, the composition of personal data to be processed, actions (operations) performed with personal data;

Personal Information– any information relating directly or indirectly to a specific or identifiable to an individual(to the subject of personal data);

• provision of personal data - actions aimed at disclosing personal data to a certain person or a certain circle of persons;
• dissemination of personal data - actions aimed at disclosing personal data to an indefinite circle of persons (transfer of personal data) or familiarizing with personal data of an unlimited number of persons, including the disclosure of personal data in the media, placement in information and telecommunication networks or providing access to personal data in any other way;

Destruction of personal data- actions as a result of which it is impossible to restore the content of personal data in the information system of personal data and (or) as a result of which material carriers of personal data are destroyed;

II. PRINCIPLES AND CONDITIONS FOR PROCESSING PERSONAL DATA

2.1 Principles of processing personal data The processing of personal data by the Operator is carried out on the basis of the following principles:

• legitimacy and fairness;
• limiting the processing of personal data to the achievement of specific, predetermined and legitimate purposes;
• preventing the processing of personal data that is incompatible with the purposes of collecting personal data;
• preventing the merging of databases containing personal data, the processing of which is carried out for purposes that are incompatible with each other;
• processing only those personal data that meet the purposes of their processing;
• compliance of the content and scope of the processed personal data with the stated purposes of processing;
• preventing the processing of personal data that is excessive in relation to the stated purposes of their processing;
• ensuring the accuracy, sufficiency and relevance of personal data in relation to the purposes of processing personal data;
• destruction or depersonalization of personal data upon reaching the goals of their processing or in case of loss of the need to achieve these goals, if it is impossible for the Operator to eliminate the committed violations of personal data, unless otherwise provided by the Federal Law.

The operator processes personal data in the presence of at least one of the following conditions:

• the processing of personal data is carried out with the consent of the subject of personal data to the processing of his personal data;
• the processing of personal data is necessary to achieve the goals provided for by an international agreement Russian Federation or by law, for the implementation and fulfillment of the functions, powers and duties assigned to the operator by the legislation of the Russian Federation;
• the processing of personal data is necessary for the administration of justice, the execution of a judicial act, an act of another body or official subject to execution in accordance with the legislation of the Russian Federation on enforcement proceedings;
• the processing of personal data is necessary for the performance of an agreement to which the subject of personal data is a party or beneficiary or guarantor, as well as to conclude an agreement on the initiative of the subject of personal data or an agreement under which the subject of personal data will be the beneficiary or guarantor;
• the processing of personal data is necessary to exercise the rights and legitimate interests of the Operator or third parties or to achieve socially significant goals, provided that the rights and freedoms of the subject of personal data are not violated;
• processing of personal data is carried out, the access of an unlimited number of persons to which is provided by the subject of personal data or at his request (hereinafter referred to as publicly available personal data);
• processing of personal data subject to publication or mandatory disclosure in accordance with federal law.

The operator and other persons who have gained access to personal data are obliged not to disclose to third parties and not to distribute personal data without the consent of the subject of personal data, unless otherwise provided by the Federal Law.

2.4 Public sources of personal data

The operator does not create public sources of personal data of subjects

Processing by the Operator of special categories of personal data relating to race, nationality, political views, religious or philosophical beliefs, health status, intimate life is not carried out.

2.6 Biometric personal data

Information that characterizes the physiological and biological features person, on the basis of which his identity can be established - biometric personal data - can be processed by the Operator only with the consent in writing of the subject.

2.7 Entrusting the processing of personal data to another person

The operator has the right to entrust the processing of personal data to another person with the consent of the subject of personal data, unless otherwise provided by federal law, on the basis of an agreement concluded with this person. A person who processes personal data on behalf of the Operator is obliged to comply with the principles and rules for the processing of personal data provided for by Federal Law-152.

2.8 Cross-border transfer of personal data

The operator is obliged to make sure that the foreign state, to whose territory the transfer of personal data is supposed to be carried out, provides adequate protection of the rights of personal data subjects, before the start of such transfer.

Cross-border transfer of personal data on the territory of foreign states that do not provide adequate protection of the rights of personal data subjects may be carried out in the following cases:

• the presence of written consent of the subject of personal data to the cross-border transfer of his personal data;
• performance of an agreement to which the subject of personal data is a party.

III. RIGHTS OF THE SUBJECT OF PERSONAL DATA

3.1 Consent of the subject of personal data to the processing of his personal Data

The subject of personal data decides to provide his personal data and agrees to their processing freely, by his own will and in his own interest. Consent to the processing of personal data may be given by the subject of personal data or his representative in any form allowing to confirm the fact of its receipt, unless otherwise provided by federal law.

The obligation to provide proof of obtaining the consent of the subject of personal data to the processing of his personal data or proof of the existence of the grounds specified in Federal Law-152 rests with the Operator.

3.2 Rights of the subject of personal data

The subject of personal data has the right to receive information from the Operator regarding the processing of his personal data, unless such right is limited in accordance with federal laws. The subject of personal data has the right to demand from the Operator the clarification of his personal data, their blocking or destruction if the personal data is incomplete, outdated, inaccurate, illegally obtained or not necessary for the stated purpose of processing, as well as take measures provided by law to protect their rights .

The processing of personal data in order to promote goods, works, services on the market by making direct contacts with a potential consumer using means of communication, as well as for the purposes of political campaigning, is allowed only with the prior consent of the subject of personal data. The specified processing of personal data is recognized as being carried out without the prior consent of the subject of personal data, unless the Company proves that such consent has been obtained.

The operator is obliged to immediately stop, at the request of the subject of personal data, the processing of his personal data for the above purposes.

It is prohibited to make decisions on the basis of exclusively automated processing of personal data that give rise to legal consequences in relation to the subject of personal data or otherwise affect his rights and legitimate interests, except as otherwise provided by federal laws, or with the written consent of the subject of personal data.

If the subject of personal data believes that the Operator is processing his personal data in violation of the requirements of Federal Law-152 or otherwise violates his rights and freedoms, the subject of personal data has the right to appeal against the actions or inaction of the Operator to the Authorized body for the protection of the rights of subjects of personal data or in court .

The subject of personal data has the right to protect his rights and legitimate interests, including compensation for losses and (or) compensation for moral damage in court.

IV. SECURITY OF PERSONAL DATA

The security of personal data processed by the Operator is ensured by the implementation of legal, organizational and technical measures necessary to meet the requirements of federal legislation in the field of personal data protection.

To prevent unauthorized access to personal data, the Operator applies the following organizational and technical measures:

• appointment of officials responsible for organizing the processing and protection of personal data;
• limiting the composition of persons having access to personal data;
• familiarization of subjects with the requirements of federal legislation and regulatory documents of the Operator for the processing and protection of personal data;
• organization of accounting, storage and circulation of information carriers;
• identification of threats to the security of personal data during their processing, the formation of threat models on their basis;
• development of a personal data protection system based on the threat model;
• verification of the readiness and effectiveness of the use of information security tools;
• delimitation of user access to information resources and software and hardware for information processing;
• registration and accounting of actions of users of information systems of personal data;
• use of anti-virus tools and means of restoring the personal data protection system;
• application, if necessary, of firewalls, intrusion detection, security analysis and cryptographic information protection;
• organization of access control to the territory of the Operator, security of premises with technical means processing of personal data.

V. FINAL PROVISIONS

Other rights and obligations of the Operator as an operator of personal data are determined by the legislation of the Russian Federation in the field of personal data.

Officials of the Operator guilty of violating the rules governing the processing and protection of personal data bear material, disciplinary, administrative, civil or criminal liability in the manner prescribed by federal law.

For connoisseurs natural materials we offer the production of wooden doors to order from solid wood of valuable species on an individual order.
They are perfect for decorating your home or office.

You can order interior doors made of solid oak, ash, alder, rosewood and other types of wood by sending us an application by mail [email protected] with a sketch and the desired dimensions. We will make a preliminary calculation, and after confirming the dimensions, we will provide our offer for the manufacture of wooden doors to order.

We accept applications for the manufacture and installation of at least 2 doors.

Estimated cost of the kit from 50 000 rubles(with finishing, delivery and installation):

• - standard canvas (700 mm x 200 mm x 40 mm) with a sealant,
• - box (80 mm),
• — platbands on both sides (80 mm),
• - from 100% of the array.

Production time standard canvas – 10 business days, from the moment of signing the drawings.

Non-standard interior doors to order are calculated individually.

The cost of manufacturing entrance wooden doors from solid oak or ash, with finishing and installation from 80 000 rubles.

We make sure to make all the necessary measurements, create a project for future
products, we follow the terms of production.

Interior doors (solid oak, ash, alder, rosewood, etc.)

Interior doors made of solid wood, made to order, will perfectly complement the design of your home. We manufacture wooden doors to order from precious wood: from alder, ash, oak, teak, rosewood, mahogany, maple, larch, beech.

Such interior doors made of solid wood can be, as separate element decoration of the room, and part of a full-fledged interior made of wood.

When choosing the type of wood for a future door, pay attention to solid ash - a light and warm shade of ash interior items creates a very pleasant and light atmosphere in the house. Therefore, interior doors made of solid ash are very popular for residential premises.

Oak with its slightly darker tone and rich noble golden hue is universal, wooden interior doors made of solid oak will successfully fit into the interior of the apartment, and decorate the head office in the office.

For lovers of luxurious dark shades, rosewood can be recommended: doors made of this valuable type of wood (we buy it ourselves in Laos) have a pleasant dark color with a beautiful pattern. Such interior doors made of rosewood must be combined with other items made of this wood to create a holistic image.

For connoisseurs of durable work and durable materials, solid alder doors are suitable. When treated with solid alder doors, they can last for many years, not succumbing to moisture or temperature changes in the house.

Doors to order non-standard interior - production in "StolyarVil"

Modern technologies make it possible to manufacture interior doors to order according to individual sizes in any style from classic to high-tech.

Careful selection of raw materials, wood processing, compliance with the production technology of solid wood doors, manual labor our craftsmen and the creative abilities of designers allow us to create custom-made interior doors of the highest quality.

You can order doors by sending us a request by mail [email protected] with a sketch and the desired dimensions. We will make a preliminary calculation, and after confirming the dimensions, we will provide our commercial offer.

Doors made of solid wood are unique both in color and pattern, so they are always a bright decoration of the interior. They are often installed in respectable apartments and country houses. Many factories produce such canvases to order according to individual sizes, but this process is long and complicated, hence the high price of the output products.

What types of wood are used?

The list is extensive, but the most popular are:

• pine and spruce - canvases from such an array are quite light and look neat, but are inferior to other types in terms of the beauty of the pattern and color saturation;
• oak - doors with impeccable aesthetic characteristics and heavy weight (up to 100 kg), so they need special hinges;
• ash - the wood has an interesting pattern with wide stains and curved wavy lines that differ from the background in color, so many people like it even more than expensive woods.

For the manufacture of doors from the premium segment, an array of exotic species is used.

Production stages

1. Preparation of raw materials. If we are talking about the production of doors of reference quality, the wood is dried for at least two years in a well-ventilated room at room temperature and without contact with the sun. The procedure, of course, can be accelerated with the help of special ovens, but then there is a risk of cracking the material. Interior canvases made from well-dried raw materials almost never deform.
2. Sawing. Cutting the workpiece into parts is carried out in accordance with the sketch on automated milling machines. The resulting raw elements are then glued together (if the canvas is made up of several parts). Some operations on this stage can also be carried out manually if a complex interior design is being made.
3. Assembly. To connect individual parts, special non-toxic compounds are used that do not leave a specific smell on the wood and are completely safe for health after drying.
4. Grinding. At this stage, two tasks are solved: giving wooden surface smoothness and revealing the beauty of the material.
5. Finishing processing. The door is primed, painted or varnished, then polished. This is how it takes on its final form. You can perform patination or other decorative processing, if provided in the sketch.

In factories oriented to the mass consumer, the production of wooden doors is fully automated. Elite models in most cases are made by hand and have a unique design.

Production of Belarusian doors

Production of blind doors

Production of doors for the house

Japanese style doors

Our door production:

Speaking about the quality of doors, first of all it is worth considering where and how they are made. The production of doors is a complex and painstaking work of more than a dozen professionals. After all, not only the appearance depends on this, but also how long the doors will serve you, retaining their original qualities.

Production of interior doors from solid wood: the initial stage

Manufacturing process interior doors custom-made starts with a selection of high-quality alder, ash, oak, birch and other woods valuable tree, depending on the price range. The very first stage of door production is sawing and drying wood. For each type of wood are selected optimal conditions drying, which ensures a high percentage of preservation useful properties And guarantees the high quality of the material. Already finished boards are sawn into lamellas and carefully sorted. Lamellas with defects, such as knots, sapwood, etc., are excluded from the assembly.

Production of doors photo 1	Production of doors photo 2	Production of doors photo 3
Production of doors photo 4	Production of doors photo 5	Production of doors photo 6
Production of doors photo 7	Production of doors photo 8	Production of doors photo 9
Production of doors photo 10	Production of doors photo 11	Production of doors photo 12
Production of doors photo 13	Production of doors photo 14	Production of doors photo 15

In the future, the selected product of the highest grade enters the splicing line. Since the internal doors are filled with 100% solid wood and lamella - it is the “jointed timber” technology that allows avoiding deformation of the doors, giving them resistance to mechanical damage, temperature fluctuations and humidity.

The next stage in the production of wooden doors

After cutting and drying, the lamella enters the gluing line in furniture board. Next is assembly door leaf panel-frame construction. Ready-made timber for standing and transverse elements of the door leaf, at the request of the customer, can be lined with high-quality MDF 3 mm. Also, paneled elements of canvases and platbands can, at the choice of the customer, be veneered sheet MDF 12-16 mm.

But this is not the whole component of such a process as the production of interior doors from solid wood. Art artistic carving woodworking, sanding and finishing made from ordinary high-quality wooden doors real masterpiece. The production of doors to order is the painstaking work of many skilled craftsmen.

The whole process of work, processing raw materials and working with the finished product, is carried out exclusively on expensive equipment. Are used latest developments and Italian technology allowing to reach a new level in the manufacture of wooden interior non-standard doors. Thanks to all this, our doors have a number of advantages. The collapsible design makes it possible to make a glazed door out of a blank door at home. In addition, this design guarantees the perfect symmetry of the door and its increased resistance to mechanical damage.

It is also very important that any door made of solid wood will always look exclusive. Since natural wood always has an individual structure, the lamellas will not be identical. In combination with curly baguettes and frames - the door acquires a unique charm, warmth natural wood and emphasizes your aesthetic taste.

Production of wooden doors - the last stage of production: painting

Finishing painting of the door is also carried out on special equipment. A variety of shades will satisfy even the most demanding customers. Refined bleached oak, exquisite mahogany, elegant wenge combined with patination and brushing create a noble effect of antiquity. For all this variety in the manufacture of wooden doors, only high-quality acrylic paints, polyurethane German and Italian varnishes Barpimo, Ica.
An important highlight in the manufacture of wooden interior doors is high-quality accessories from the Italian Melodia, Forme etc.

first class equipment, classical methods wood processing, many years of experience in the production and manufacture of interior doors to order, the latest fashion trends - all this is offered to you by our carpentry workshop to realize your wildest fantasies.

Production of wooden doors to order is possible with us. You only need to write or call, and our managers will contact you.

One of the most popular solutions for decorating openings between rooms in a residential, office space, in an educational, medical and other institution, as well as in private houses, are solid wood doors. different breeds. Such canvases are presented in a wide price range, in a large design and stylistic variety.

Advantages of natural wood doors

Solid wood interior doors appreciate:

• for safety. Such canvases consist of solid or jointed wood coated with non-toxic paintwork materials, which means that the release of formaldehydes and other harmful substances into the air is excluded;
• aesthetic appeal. The unique structure and texture of natural wood will fill even the most modest interior with nobility;
• durability. Canvases from some types of wood are able to withstand severe loads and strong mechanical stress without damage. appearance and functionality. Cheaper models, for example, from, are less stable, but if necessary, can be restored;
• heat and sound insulation. The high density of the material contributes reliable protection from extraneous sounds and prevents heat loss. To improve these qualities, doors are equipped with seals and door closers.

Solid wood doors range

For true admirers of eco-materials and noble interiors, the catalog contains models from the best Russian and foreign manufacturers.

• Deaf and glazed structures. In the production of the latter, various types of glass are used - lacobel, satin, triplex. To decorate the inserts, sandblasting, stained glass, etc. are used.
• Panel and panel canvases.
• Models covered with varnishes, stains, decorated with enamel.