Machine for cutting plastic bottles. Homemade world - a simple cutter for glass bottles. What tools and parts are needed to make this simple cutter

Not particularly tricky and easy to manufacture, the device will help in the manufacture wonderful crafts from plastic bottles (PET). The rest is only limited by your imagination and creativity...

PET bottles are a ubiquitous product that is available to everyone, and this can be partly considered its advantage. In Portugal, plastic bottle collectors are known as "catadores". They collect PET bottles and other types of waste from the street for profit. Some are looking for new ways to use the material. Recycle PET bottles and use them in art or design. This is one of the new Designed by Takashi Utsumi, he saw the potential in the material for making small craft, so he developed the "filetador" PET bottle shredder. various crafts. The device proves that there are no restrictions on the use of such recycled PET bottles and everything relies only on your creativity. And this shredder is designed to help you with this and save you from routine work - cut bottles into strips in a matter of moments, turning this activity into a pleasure.

Now let's take a closer look...

Let's start with a video demonstrating the operation of a PET shredder:

Well, in more detail you can make out everything in the photos:

PET bottle grinder (filetador)

From 2002 until the end of 2010, Takashi Utsumi offered two shredder models: the F-200, which produced 2 cm, wide belts, and the F-15/40, which produced 1.5 - 4 mm belts. Now these models will be replaced by two new ones, using new types of materials.

New models:

- F-200C, which allows the crushing of 2L bottles and bottles with smaller volumes (as a replacement for the F-200, which could only grind 2L bottles);

- mini shredder, it is a popular simple shredders. It is extremely simple and cheap to manufacture than its predecessor, the F-15/40. Using this new model takes some practice and a little more attention than with the F-15-40. The mini shredder is great for creative use.

Comparison of new models with old ones:

Well, now the most important thing...

How to make a plastic bottle shredder on your own?

With a mini shredder, you can cut long and narrow strips from PET bottles. The instrument can be used alone as a portable device or attached to a base on a table

Manual minishredder

Minishredder attached to the base

ORIGIN

The first mini shredder was similar to a blade holder and was used in the F-2000. Later, other models were invented to make the device more convenient.

EVOLUTION

From left to right: F-2000 cutter, shredder blade holder, first mini shredder model, transitional model, and current mini shredder model.

MATERIALS AND TOOLS

The tools needed to create a mini shredder can be found in any home workshop.

The materials needed are quite simple: two screws with nuts, one washer, one 9-10mm cutter blade, a piece of aluminum U-profile and a piece of wood for the handle.

There are many devices on the Internet to cut plastic bands and ropes from bottles or even fishing line. Among them are many complex devices and simple ones. But this cutter is distinguished, in its own way, by ingenious simplicity and grace. For him, well, you need to grind no details, everything is at home or you can buy it very cheaply. The main thing is that you can make it with your own hands in just minutes. With it, you can adjust the width of the tape and make it different sizes.

Just take a look at what this Chinese store has for the garden.

What tools and parts are needed to make this simple cutter?

This is the blade that will perform the action. A clerical knife or, as in this case, from a pencil sharpener will do. Need washers and 2 screws. You only need a screwdriver.

Progress

We take out the blade from the sharpener with a screwdriver. And now we need to decide what width we will cut the tape from the PET bottle. The combination of washers adjusts the height and width of the rope.

For the product you will need a table into which it is not a pity to drive a couple of self-tapping screws. Although, you can take the board under the machine, and fasten it to the table with clamps.

When a place is found cutting machine, at a distance from each other, we screw in two self-tapping screws with washers. We set the blade to the desired height and clamp it with self-tapping screws.

Now we are preparing plastic bottle rope cutter. Carefully separate the bottom with a clerical knife. The cut must be even. We fill the workpiece in the cutter.
We process a poltorashka with our own hands and a simple machine. To make the thread even, press a little from above. We pull the finished tape from the machine.

Benefits of plastic tape

Plastic is not destroyed by direct sunlight.
Low temperatures do not affect structural integrity.
Strong and durable, has an unlimited service life.
Withstands high weight loads.
Unlimited available.
Wide application in construction, decoration, convenient household crafts.

Tape cutting machine

For self-manufacturing machine will need:

Rectangular/square base made of plywood or any similar surface structure, at least 20 cm in size.
washers large diameter, 6-8 pcs.
Small diameter washers, M6 bolts, nuts 2 pcs.
Drills of 2 types, slightly smaller and larger, suitable for the hole of the washers.
A piece of a utility knife (the part with the hole)
Screwdriver.
Wrench. Better divorce.
Marker.

Machine manufacturing:

Marking is done on the basis - the washers are applied tightly with a figure eight, and the place of the future two holes is outlined.
With the help of a screwdriver and a smaller drill, through hole, then changes to a larger drill, and expands to the desired diameter.
A bolt is inserted, a washer and a nut are fixed on the other side of the base wrench. When the bolt has firmly cut into the base web, the washer and nut are untwisted and removed. The same operation is done with the second hole.
Cutting a tape from a plastic bottle can have different widths. It depends on the thickness of the washers laid on top of the bolt.
When required amount washers are installed on the bolt, a clerical knife is put on, the cutting end of which should touch the second bolt.
From above, the structure is fixed with a few more bolts. They will act as a knife retainer and the original plastic tape.

The machine for cutting tape from a plastic bottle is ready, to check it, the bottom of the bottle is cut off, an incision is made with scissors or a knife. This is a great start strong rope slips between the bolts. The neck is held parallel to the table, the tape of the required thickness is freely stretched by hand.

Cutting a tape from a plastic bottle is also possible in another way.

You will need:

Part of the building corner 20-30 cm long.
The blade of a construction / clerical knife.
Nuts 2 pcs. size m 5.
Hairpin m 5.
Drill
Drill.
Hacksaw for metal.

Manufacturing

In the corner, drill a through hole that matches the diameter of the hole in the clerical knife.
Having retreated to the width of the nut, cuts of various depths are made with a hacksaw, equal to the width of the required tape. The optimal range is from 1 mm to 10-12 mm. It will be necessary to process the edges so that the resulting product is even without hooks.
The knife is inserted into the corner, combined with the pin and the structure is fixed with nuts.
For the resulting device, you need a stable base. wooden block or a log on which the corner is attached.

The bottom of the bottle is cut off, the plastic container itself is put on a hairpin, the beginning of the future tape is separated with scissors, which is threaded into the notch of the desired thickness. Both hands are free to wind the resulting tape. Such a machine for cutting tape from a plastic bottle is better than the previous one, due to the ability to obtain cuts of different thicknesses, while there is no need to reduce or increase the number of bolts as in the first version.

Hello dear friends! Today I will tell you how to make a bottle cutter for cutting ribbons from plastic bottles. For this DIY, you will need a piece of chipboard in which holes are drilled and two M6 bolts are inserted.

We put three washers on each bolt.

Blade from a construction knife, the most important part of the bottle cutter.

Put on the washers and tighten the nuts. If you want to increase or decrease the width of the cut tape, simply place the required number of shims under the blade.

Attach the bottle cutter to the table top with a clamp.

From the bottle, pre-cut the bottom and make the beginning of the tape. Insert the bottle into the bottle cutter.

With your left hand, press the bottle down, and with your right hand, pull the tape without jerking.

From one bottle, it is possible to cut up to ten meters of very durable and necessary plastic tape in the household. The length depends on the size of the bottle and the width of the cut tape.

Friends, I advise you to make this very simple and necessary household device for cutting plastic tape.
See you in new articles!

Plastic tape from plastic bottles used in household farming. Thanks to it, you can strengthen wooden fence or tie up berry bushes. Such a rope can withstand up to 50 kg. It depends on its thickness and length. It is mainly used as a fixative.

There are two ways of cutting plastic bottles: manual and machine. You can make transparent tape yourself at home. To do this, you need sharp scissors and the correct markup.

Agree that the production of such material manually quite a labor intensive process. A special tool will help facilitate the cutting of a transparent tape.

What can a bottle cutter be made of? What materials will be needed for the construction of such a structure? The answers to these questions are presented in our article. The advice of experienced needlewomen will help to cope with the task.

Benefits of plastic tape

There are several positive qualities transparent tape in household. These include:

does not break down under the influence of sunlight;
long service life;
resists low temperatures;
able to withstand up to 80 kg;
low material cost;
lack of smell;
decorative.

How to make plastic tape cutting equipment?

The device for cutting plastic bottles consists of simple details and elements. For this you will need:

wooden base. Its width must be at least 30 cm;
washers of medium size 10 pcs.;
small diameter washer 4 pcs.;
drill 2 pcs. Its diameter must match the size of the washer;
a small part of a stationery knife 10 cm;
screwdriver and wrench;
simple pencil.

Thanks to this machine, cutting plastic bottles with your own hands is fast and high-quality, and the thread has a uniform texture. The process of creating equipment includes several stages:

On a wooden base, markings are made to fix washers of different diameters. To do this, you need a simple pencil. A screwdriver makes through holes at the marks.

The width of the plastic tape can be adjusted by moving the washers to the desired distance. Basically, this gap is 1 cm. A through hole is made on a clerical knife. It is placed over metal parts.

An additional nut will help to connect the knife to the machine structure. In this case, do not tighten it too much. This will create discomfort during the workflow.

When the equipment is ready, it is checked for operability. To do this, cut off the bottom of the bottle and strengthen it between the nuts. Now one edge is cut with a sharp knife blade, and the other is turned clockwise. The result is plastic tape right size. The photo of cutting plastic bottles captures the workflow.

Metal machine for cutting plastic bottles

We bring to your attention another idea on how to make a device for cutting bottles. For this you will need:

a small piece of building corner;
stationery blade 10 cm long;
small nuts 2 pcs.;
metal drill;
electric drill;
hacksaw.

Manufacturing process:

A small through hole is made on the surface of the metal corner. Also come with a clerical blade.

Having measured the width of the fixing nut with a hacksaw, notches are made on the surface of the corner. In the future, they will help to adjust the width of the plastic strip. The distance between each mark will be 1.5 cm.

The knife is fixed in the corner of the metal base with an additional nut.

Note!

Further, the entire structure must be fixed on a solid surface. The production of a tape from bottles is carried out by rotation plastic product clockwise. Do not make sudden movements. This may cause damage to the plastic filament.