Gate made of Euro picket fence with brick pillars
Option for covering fencing with Euro picket fences private territory occurs frequently. And, most likely, not only because the goal is to make him attractive. This material is affordable, and installation is not particularly difficult, and its light weight and variety of configurations, sizes and colors have made it popular. Moreover, manufacturers offer both more expensive types of products and cheaper ones. I would like to focus your attention on the choice.
Types of Euro picket fences used for cladding wickets and gates
The modern construction industry has offered several options for metal picket fences. It can be with or without a rolled edge.
The whole difference is that manufactured pickets under production conditions are treated with several protective layers, powder paint and rolled on a rolling mill. The appearance of such products is impeccable. Products are sorted into packs, which is convenient for transportation. You can order them in any quantity and any size.
Products cut from profiled sheets are left with raw edges. Therefore, their appearance is less aesthetic, and the paint runs the risk of peeling over time. In addition, the edges can be traumatic. But their price is several times cheaper. Craftsmen, in order to save money, buy a cheaper option and process the products themselves, bringing them to perfection.
Euro pickets can be coated with polymer on one or both sides, and there is also a powder coating. With the powder painting method, the euro picket fence is evenly coated on both sides with one color.
In addition, products with rounded edges have appeared, which gives the design a more elegant look.
Features of the material
Type of rolled euro picket fence for cladding fences
In general, any type of metal picket fence has many more advantages than wooden products, and even products made from corrugated sheets:
- galvanized steel does not rot;
- different configurations, colors and sizes allow you to combine with any material;
- light weight and compact packaging does not create difficulties during transportation;
- excellent material for DIY installation ( small sizes and weight of products);
- it is possible to make gates and wickets with or without gaps, it all depends on the method of cladding;
- in case of accidental deformation or damage, you will not have to change the entire section, or look for suitable paint, it is enough to change one or more pickets, and the wicket or gate will be like new;
- doesn't need constant care, contaminated areas are washed with water.
And, of course, a beautiful appearance combined with the practicality and lightness of the finished structures. Such advantages of the material make it possible to cover even complex types of products, such as sliding gates.
Frame making
Scheme of the gate frame with dimensions for cladding with European picket fences
For a gate frame or wicket you will need profile pipes with a cross section of 60 X 40 or 40 X 20, it all depends on the size of the leaves. The greater the width and length of the product, the stronger the pipes need to be used.
Experts advise using a profile of exactly this cross-section, since pipes with a square cross-section of 40 X 40 mm are less rigid, and if you choose products with a cross-section of 60 X 60 mm, then their appearance will be more massive, which is not compatible with a thin European picket fence.
The metal elements of the frame are welded and reinforced with cross members, for which pipes with a smaller cross-section can be used. The crossbars are welded in such a way that it is convenient to attach the euro picket fence to them.
For example, for a sash 2 m high, one crossbar in the middle is sufficient. If you need more reliable structures, the number of cross members can be increased. But, you will have to attach picket fences to each of them.
The number of stiffeners depends on the height of the products. The higher the gate, the more lintels are welded to its frame. This is explained by the fact that lightweight material may not withstand wind loads, as a result of which it becomes deformed.
Installation of pillars
View of the finished frame of closing fence elements for cladding with Euro picket fences
For gates and wickets made of Euro picket fences, you can install poles without resorting to concreting. Although, the arrangement of the pillars depends on the condition of the soil. On difficult soils, it is better to lay the foundation according to all the rules, or use screw piles.
In places where there are no problems with the soil, it is enough to drill holes whose depth is half the depth of the pillars. Posts should be inserted into the holes and driven to the required depth. Be sure to check the verticality of the installation with a level or plumb line.
After driving, the empty holes should be filled with crushed stone and compacted thoroughly. To increase stability, before filling the hole, you can install metal spacers on the pillars, and only then fill it with crushed stone and fill it with liquid cement mortar. Before fixing the frames to the supports, the solution should be allowed to harden.
Gate hinges and wickets are welded on the supporting elements; accordingly, other parts of the hinges are welded on the frames themselves. Everything is carefully measured to avoid distortions. After hanging the frames, the movement of the sashes is checked for free closing.
Sheathing process
The process of covering a gate with Euro picket fences
All welding seams should be cleaned and treated with a primer; after the products have dried, they should be painted in the color of the European picket fence. It is advisable to apply the paint in two layers, so the metal elements will be more durable.
Next, the distance between the pickets is calculated, at the discretion of the owner, but it is advisable not to make a gap of more than 5 cm. To ensure that the distance between them is the same, you can use a board of the required width, which is applied to the fixed product. Next to it, the next picket is applied and secured. And so on until the end of the fastening.
The pickets are fastened in four or more places with rounded self-tapping screws. To avoid damage during fastening upper layer picket fences, you can use special rubber gaskets on the screws.
Sheathing can be carried out various options, starting from a gap of 2 cm, ending with 8 cm, but such a gap is assumed only if the pickets are attached in a checkerboard pattern, that is, one is attached with inside, and the other is outside.
A 5 cm gap between picket fences on gates is considered the most practical. On the one hand, it has a wonderful appearance and excellent ventilation, and on the other hand, it is an economical option.
If your choice fell on covering gates and gates with a material such as Euro picket fence, then there should be no doubt that such products will be practical, beautiful and durable.
For this article are no comments yet. Be the first to comment.
Types of European picket fence gates with a wicket: design features, installation recommendations
Covering the fencing of private areas with European picket fences has not lost its popularity even for the first year. This is due to the availability of material, a wide range of colors and sizes, simplicity self-installation. Manufacturers offer both budget solutions and more expensive options for arranging fences, gates and gates.
Features and types of gates with a wicket
Euro picket fence can be installed on different types gate These are not only swing, but also sliding solutions. In both the first and second cases, the structure, for the cladding of which a material that visually resembles wood or stone is used, looks equally impressive.
Sliding gates made of Euro picket fence
The material has several features and advantages:
- pickets are not afraid of sunlight and do not fade;
- the material, subject to installation technology, has served faithfully for more than 30 years;
- the slats are difficult to damage mechanically, they are frost-resistant and easy to maintain;
- if one plank is damaged, it can be easily replaced with another without affecting other sections of the fence, gate or gate;
- wide choose design solutions gives you the opportunity to choose the best option for your site.
Classification
On the market building materials Today you can buy Euro picket fences of different classifications. This:
- piece strips and a budget option- whole sheets;
- rolled, unrolled and folded material;
- painted with powder paint on both sides or polymer paint on one;
- Euro picket fence made of U-, M- and C-shaped profiles (the latter option is optimal for installing anti-vandal fencing).
The design of the product also influences the cost of building materials. Picket fences look best under natural wood or stone, but they also cost an order of magnitude more than planks with a single-color coating.
Euro picket fence “under the tree”
Dimensions
Today, a European picket fence can be purchased for every taste and for any purpose. Standard height slats - 150, 180, 200 and 220 cm. But some manufacturers offer their customers picket fences both 50 cm high (used for landscaping) and 300 cm (for fans of high fences).
The width of the slats also varies. The market offers narrow - 70 mm and fairly wide blades - 128 mm. Standard thickness metal used in the manufacture of picket fences - from 0.4 to 0.5 mm.
Gate options
Gates made from Euro picket fences can be sliding or swing with a wicket. The choice of the optimal design depends on the taste preferences of the owner, as well as the characteristics of the site. When installing a gate, the radius of the entrance from the road and the size of the car that will regularly enter the territory are taken into account. For passenger cars a width of 3 to 3.5 meters is sufficient. For comfortable entry of a truck or bus, the width of the gate must be at least 4 meters.
Euro picket gates
Wicket design
A gate made of Euro picket fence looks stylish and bright. There are several types of installation of entrance to the territory. Wickets can:
- be an element of the gate design;
- install independently;
- be part of a single set with gates located in close proximity.
In the latter case, several options are also possible:
- both parts are placed in a single opening, but separated by a pillar or stand;
- fencing elements are installed in two openings.
Advice! By adding a decorative ridge strip to the European picket fence, you can make the gate complete and attractive.
Installation of main structures on the fence
The process of installing a European picket fence includes several stages. This:
- site marking;
- installation of support pillars on which the metal structure will subsequently be attached,
- installation of a fence frame;
- installation of wickets and gates;
- fastening metal pickets to frames.
Can be used as stands metal pipes, and brick or stone pillars.
Required tools and materials
- square pipes and screws for fastening the picket fence;
- metal logs for mounting planks and Euro picket fences;
- fastenings for metal structures and caps for poles;
- concrete mortar to strengthen the base for the racks.
Installation of a fence frame
- After marking the area, wells are made into which metal posts will subsequently be inserted. The optimal depth is from 50 mm, the pitch is 1.5-2 meters. If the pillars are brick, the technology requires constructing a foundation along the perimeter of the fence.
- The pillars are covered bitumen mastic, wedged in holes and filled concrete mortar, plugs are installed.
- The racks must be leveled and secured in this position with temporary spacers.
- They begin installing the logs after a few days, or better yet, after a week, allowing the concrete to fully harden. The upper jumper should be 20-25 cm from the top of the picket fence, the lower one - 30 cm from the ground level. The logs are attached to the racks by welding or using brackets. The optimal number of jumpers depends on the height of the fence, gate or wicket. For a 2-meter height, 4 logs are enough.
- Gate and wicket frames are hung on steel hinges fixed to appropriate posts.
Fastening metal strips
On last stage metal pickets are attached. This is done simply and quickly. The process consists of several stages:
- The welding seams of the frame are cleaned and covered with primer, after which they are painted in the color of the selected euro picket fence (in 2 layers).
- The optimal distance between the slats is calculated. The minimum distance between them is 2 cm, the most used and aesthetically attractive is 5.
- The first picket fence is attached to each lintel with rounded screws. A board is placed close to it, the width of which is equal to the selected distance between the planks. The next picket fence is installed, etc.
Advice! Are you afraid of ruining the top layer of pickets during installation? Use special rubber gaskets for self-tapping screws. This will preserve the aesthetic appeal of the fence for as long as possible.
Conclusion
A fence covered with a European picket fence is modern and stylish solution, relevant as for country houses, and for country cottages. This solution is also used for landscaping commercial or industrial areas. The ease of installation allows you to significantly save on labor costs, since even a novice builder can sheathe metal structures with Euro picket fences. You can verify this by watching the following video:
How to choose a gate with a wicket for a summer house or a private house
Not a single dacha or a private house cannot do without a suitable gate with a wicket. Any sector where private houses and cottages are located needs special fencing, as a result of which buyers simply cannot do without modern gate and a reliable gate. Today, such products are produced in a wide range; among the huge selection you can find the most different variants, as well as purchase custom-made building materials from the material you are interested in. How to choose the right gate with a wicket for a private home: let’s figure it out together.
Today there are several types of gates with a wicket:
- swing;
- sliding;
- recoil;
- lifting;
- mechanical;
- combined.
Sliding and hinged options are considered the most popular and relevant., which are most popular among residents of private houses. Their designs are familiar to everyone and do not require unnecessary installation costs. Each variety has its own positive and negative sides.
Swing
Such varieties never go out of fashion; they can be purchased for fencing any estate or summer cottage. The design is considered simple, practical and wear-resistant; it is durable and does not require a thorough approach to installation. These gates consist of two main leaves, which, using special loops attached to poles. The design has a lot of advantages and is time-tested.
Wickets in swing gates They are rarely installed: more often they are fixed next to them. Disadvantage swing structures is the fact that such gates require free space and area to open. If the weather conditions where you live are harsh, you must ensure that the gate stops are as reliable as possible. Otherwise, in a strong wind, poorly secured shutters can damage a car driving into the yard.
Sliding
Their main feature and advantage compared to swing options are that they do not require a large area to install and open. The gate can be embedded directly into the gate or installed next to it. For installation, many residents use the services of professionals: installation can be quite difficult. Sliding structures presented in a wide range. They are sold in finished form, they can also be made to order according to individual measurements.
Metal options are susceptible to corrosion. You can embed a wicket into any gate design, which will look original. However, residents of the house often install it separately for greater convenience. If the gate is correctly installed next to the gate structure, you can get a harmonious appearance.
Automatic
Automatic varieties are very popular today. Products of this type are very convenient. They can be opened while, for example, in a car. All you have to do is press a button on the remote control. Modern technologies make it possible to equip variants of this type with special sensors.
The gate will open independently when the owner approaches it. It is believed that the electric drive is installed only on sliding options. As for installing such a system on swing gates, it is considered less popular due to its high cost. TO automatic gates Often they select standard gates that do not cut into them.
Materials
Many manufacturers know that metal options reliable, they are classic, they are always chosen. The list of materials from which high-quality gates with wickets are made is quite large today.
Tree
The tree is often used in the manufacture of varieties with gates.
U wooden structures available whole line undoubted advantages compared to other materials:
- Wood products are considered environmentally friendly for humans and the environment;
- wooden gate structures are often easy to install; many residents install them themselves, without the help of specialists;
- they look elegant, especially if they have special carvings.
The disadvantages of wood products include the fact that they require regular painting and processing by special means so that the wood does not start to disappear and rot. The array does not like wet weather. If you live in a rainy or cold climate, wooden gates with a gate will not suit you. They will absorb moisture, as a result of which the structure may become deformed and then become unusable.
Corrugated sheet
Corrugated sheets are used to make gates and wickets. This material is nothing more than profiled sheets of galvanized steel. Fences, gates and gates made of corrugated sheets are stable and wear-resistant to various weather conditions. Service life of products made from of this material also pleases many customers.
The advantages of corrugated sheeting include the following:
- Gates and wickets from this material can be made in any color. You can easily install decorative forging on them;
- Sheets of this material will not hurt your wallet. For excellent quality, manufacturers ask a very reasonable price;
- Corrugated sheeting is a fairly light material, yet it is durable and wear-resistant to various mechanical damage and unexpected weather changes;
- It does not require regular and professional care;
- Gates and wickets made from this material will become great solution for any country estate.
We make a gate from a European picket fence: guests must be greeted beautifully
Even on good fence Gates and gates should stand out and greet guests with their friendly appearance. How to do it yourself?
European picket gate with brick pillars
The simplest option - highlighting with color - does not always work. It is best to use another material for this. Then you can experiment with color, shape, and design.
Selection of material for the gate
We will not look for options for expensive fences made of forged lattice and brick walls: Anyone who has the opportunity to build such a fence will also find money for a designer.
For fences made of other materials, gates and wickets made from Euro picket fences are a good choice. Since its appearance on the market, it has been in constant demand, because it has many advantages over both wood and profiled sheets:
- Unlike wood, the Euro picket fence does not rot, because it is made of galvanized steel and coated with two layers polymer paint. Service life – up to 50 years.
- The variety of colors and textures in combination with different profiles and sizes allows the use of metal pickets in various fences and structures: from flower beds and front gardens to the manufacture of wickets, gates, and even as a fence on the site. The width of the plank is from 70 to 128 and the length from 0.5 to 3 - this is enough to “fence” whatever your heart desires.
- Transportation even with your own hands is not difficult: packs of picket fences do not take up much space.
- You can make a wicket, gate and fencing from European picket fences with your own hands. Light planks can be aligned along the cord and attached with self-tapping screws alone.
- The best part is that the design of the fence and gate made of Euro picket fence can be anything. Choose the profile, color, and shape of the plank. You change the height and width of the picket fence, install it with different gaps, in one or two rows. Can you imagine how many options there are for designing the entrance to the site?
Picket fence design options
- And all this beauty does not require maintenance or regular painting. In case of damage, it is enough to replace a couple of strips.
Some production features
Features lie in the processing method.
Galvanized and painted metal strip is passed through rollers, which gradually form a profile, then cut to the specified size. This treatment does not deform the metal coating.
There is another production - “garage”. Sometimes the strips are cut from ready-made corrugated sheets; in other cases, the profile is bent using a homemade stamp-press, damaging the polymer coating. To refine the cut edges, they are bent 180°; in this case, the paint may completely peel off.
How to make a gate from metal picket fence
Now that the agony of choosing the material and design of the wicket and gate is over, you can begin to put your ideas into practice.
First of all, you need to prepare the tools and materials:
- A tape measure, a screwdriver, an angle grinder, almost everyone has a level now.
- To install the pillars you will need a drill, sand, crushed stone, and cement.
- Without welding machine It is impossible to mount the frame of the wicket and gate. It’s good if you are a welder and can make the gate yourself, otherwise you’ll have to look for a craftsman.
- Self-tapping screws to match the color of the metal picket fence, primer, paint, and grinder circles are consumables.
Let us immediately note that the posts for gates and gates must stand firmly: they are not connected into a single “chain”, like fence posts. That is why when they lay strip foundation for a fence with brick columns, the foundation is not interrupted under the entrance to the site. If a strip foundation is not required, then the “entrance” pillars are installed especially carefully.
- Regardless of the soil, we drill a well deeper than the freezing level.
- Add a layer of sand to the bottom and tamp it down.
- We are preparing the pillars. For them we use a pipe Ø100 mm or profile pipe 80 by 80 with a wall thickness of at least 2-3 mm. We take the length with a small margin. We weld 2 transverse struts at the bottom of the pipes; they will prevent the soil from pushing the pillars out of the ground. After this, the columns are primed and painted.
- We install the pillars in the wells, align them with the cord and level.
- Fill it with concrete to a quarter of the height and check for correct installation. You should not fill the hole completely with concrete: this increases the adhesion surface of the concrete to the soil and the pushing force increases.
- After a day or two, when the concrete has set, fill the hole to the top with a mixture of sand and crushed stone. We tamp in layers.
Self-installed poles stand firmly and are not subject to being pushed out. You can lay a brick pillar around the metal base, make formwork and fill the pillar with cobblestones, or assemble a fake pillar from plastic blocks.
Having installed the pillars, we measure the distance between them and make frames for the wicket and gate. If you don’t have a welding machine, and you don’t have the opportunity to make them yourself, contact your friends and neighbors - now many people have welding at home. Frames must have reinforcements, especially gate leaves.
After all welding work Gate frames and gates are cleaned and primed. After drying, paint in two layers.
It is not difficult to mount a Euro picket fence with your own hands, which is what we will do now. For this:
- First, mark the position of the planks so that the gaps between them are the same. We take into account that during installation the gaps will be covered with slats of the second row. This way you can adjust the “transparency” of the gate.
- We stretch the cord to the desired height and begin to attach the picket fence. Have you already stocked up screws to match the color of the gate?
- It won’t be difficult to install the gate: after all, it’s just two more gates, but larger in size.
Gates and wickets made of Euro picket fence
Euro picket fence is a material that very successfully imitates wood, but costs much less, and this makes buying a gate or wicket made from it incredibly profitable. Aesthetic appearance and financial affordability have become the key to the fact that today the European picket fence can be seen on a huge number of plots surrounding both modest, unremarkable houses and luxurious country mansions.
The popularity of gates made of Euro picket fence is largely due to the fact that this material is quite versatile. It fits perfectly into any architectural style, harmoniously coexists with other construction raw materials. The European picket fence looks especially advantageous in the company of brick and stone - artificial or natural.
Advantages of gates and wickets made of European picket fences
1 . Diversity color solutions. Perhaps no building material is as good in this regard as European picket fence. Its coating can even imitate a natural stone or a tree, but about diversity color versions there's no need to even talk.
2 . High degree of strength. This indicator depends not only on the material, but also on the type of profile. Most often, gates are purchased and installed from M- or U-shaped euro-pickets, however, if you live in an unguarded area, it will be more profitable to buy a profile in the shape of the letter “C” (it is often called anti-vandal).
3 . Easy to care for. Often the owners land plots They are faced with the fact that gates and wickets need to be painted regularly. This will not happen with a European picket fence, since the material does not fade in the sun. A polymer coating applied to galvanized steel will reliably protect the gate from moisture and rust.
4
. Durability. If the European picket fence from which the gate or wicket is made is of high quality, and all conditions were followed during installation technical requirements, then the euro picket fence will serve you for about 30 years.
Easy to install. By entrusting the installation of gates or wickets made of Euro picket fence to specialists who have extensive experience and know all the nuances of working with the material, you can be sure that the gates and wicket will be installed in the best possible way.
Heater from ceramic tiles- cheap and practical
After purchasing a summer house, the first thing you need to do is build a reliable fence to protect your area from intruders. Therefore, first you need to choose good material.
Metal gates with a wicket made of picket fence - here correct solution in this situation. In addition, this material is easy to use and has a reasonable price, which is most suitable for a summer residence.
You also need to take into account the aesthetic qualities of the metal picket fence; it is thanks to them that it enjoys good success among consumers.
Moreover, almost anyone can make a gate with a wicket from such material.
Installation of pillars
Before installing picket fence gates for your dacha, you need to install the posts. It is best to use a 100/100 mm profiled pipe, this will give the structure greater reliability.
1. First of all, you will need to dig 3 holes for future racks. For greater stability of the pillars from the impact of load on them, the depth of the pits should be at least 1/3 of the height of the pillar. The picket fence is installed separately, and a third hole is provided for it.
2. When the holes are dug, it is necessary to lay a cushion of sand and fine crushed stone on their bottom, after which compaction is carried out.
3. Next, you need to install the pillars. To give them greater stability, a square or round metal plate is welded to the end of each post. You can also use pieces of channel welded crosswise.
4. Then all the holes are filled with pre-prepared cement mortar. To ensure that the cavities are filled, you need to do a good tamping.
After pouring, the solution must be allowed to set, otherwise the verticality of the racks may be disrupted. Installation of gates from picket fences for a summer residence can be carried out after two weeks, when the solution reaches its strength.
Manufacturing and installation of gates and wickets
Without waiting for the solution to set, you can begin making gates and wickets for your dacha.
1. First you need to install the sashes. For this, it is best to use a 60/20 mm profiled pipe or a 50/50 mm metal corner. In this case, we will use a profiled pipe.
3. Then you need to prepare the blanks. To do this, the profile is measured to the appropriate length and cut using a grinder. Don't forget to sand off any remaining burrs on it. Next, the workpieces are joined, and the diagonal is checked using a thread.
4. After all the structural parts are fitted, they are tacked by welding. Just don’t immediately scald the seams; first you need to check the verticality and horizontality of the structure, because it could “lead.” If this happens, then this problem can be eliminated using a hammer, knocking the parts into place.
5. In order to increase the rigidity of the sashes, the structure is provided with additional spacers. Often they are used as a profiled pipe 40/20 mm. The number of spacers mainly depends on the size of the sashes, so there can be two or one.
6. After making the frame, you need to start installing the canopies. To begin with, they are welded to the posts. Then the sashes are installed on bars to create a working clearance for them, often it is 7 cm, and are also welded to the canopies.
7. Next, the frame needs to be removed from its hinges and covered with a picket fence. When installing the picket fence, be sure to ensure that there is an equal distance between the slats, and only after that fasten them to the frame. The picket fence can be fastened using a rivet tool or special self-tapping screws.
Covering the garden gate is done in the same way.
This completes the process of installing gates and wickets for a summer residence using a metal picket fence, and, as you understand, this does not require much effort or expense.
The widespread use of metal picket fences can significantly expand the capabilities of manufacturers of building materials. Additional research in the area protective coatings every year they improve the material, making it more wear-resistant and at the same time, without affecting the cost of the material. Gates made of metal picket fences are one of the most inexpensive security structures. At the same time, the gates are much lighter than from other materials.
Features of gates made of metal picket fence
As mentioned above, using a metal picket fence for gates can significantly reduce the weight of the entire structure. This significantly reduces the load on the rotating mechanism, thereby significantly increasing the service life.
Compared to the use of metal profiled sheets for gate construction, a metal picket fence does not bear a large wind load due to the distance between the picket fences.
Despite the one-sided opinion that from any types of picket fences you can only make open types fences, this is not true. In fact, with the help of a metal picket fence you can successfully carry out installation of both open and closed type fences
A closed version of a European picket fence can be made using a special arrangement individual elements. To do this, the picket fence is staggered in relation to each other. The role of a separator is played by longitudinal logs. With this arrangement it turns out completely closed version fence with existing through holes between the pickets for free passage of air. At the same time, the wind load is much lower than when using solid material for a solid fence.
In the same way, you can install gates from a metal picket fence.
In addition to the ability to reduce the wind load on the gate using a metal picket fence, there are a number of undeniable advantages. For example, Euro picket fence is a more durable material than profiled metal sheet. In addition, illegal entry by climbing over a fence or metal picket gate is almost impossible due to the high likelihood of serious damage. Injury is possible due to the sharp upper edges of the picket fence.
High-quality steel is used in the manufacture of European picket fences. In this case, each workpiece is processed on a special machine, as a result of which the required profile is acquired. Processing does not end with giving the picket fence a certain shape. All types of metal picket fences must be hot-dip galvanized.
The next stage of processing is the application of the final external coating of the Euro picket fence. The most common application is the application of a polymer film, which provides good protection against oxidation and corrosion. This processing option is the cheapest.
Another, more expensive protective option for treating metal picket fences is powder coating. This type of protection is the most durable, but costs much more than the first.
Installation of gates made of Euro picket fence
Gates made of metal picket fences are made by taking preliminary measurements and determining the future installation location. In order to install any gate, you must complete the installation work on the construction of the fence.
To install the gate, it is necessary to more carefully install the support pillars on which the gate will be installed. Unlike the support posts that are used for mounting the fence, and which are installed at a depth of 1/3 of the height of the fence, the installation of the underground part of the support posts for gates is carried out with an additional margin of safety. The depth of the underground part of the gate support post should be at least? from the height of the fence.
The installation of the gate itself is carried out on a flat horizontal surface. First you need to install the frame for the gate made of rolled metal. Usually used for this steel pipes rectangular section. The frame is made using a welding machine. In order to strengthen the frame structure, it is necessary to additionally weld two pipes of the same size in the middle of the frame crosswise from one corner to the other diagonally. In this case, one pipe remains intact, and the second will have to be cut first.
The turning mechanisms are attached to support pillars also by welding separately from the gate. When securing the rotating mechanisms, it is necessary to accurately calculate the location of the mechanisms. In addition, there is some nuance - rotary mechanisms They are not attached directly to the support pillars, but with the help of metal rods approximately 5 - 10 mm from the support post.
The metal picket fence is attached to an already ready frames. The picket fence can be secured on the ground, and then the gate can be “hung”. You can also do the opposite: first hang the gate on the hinges, and then mount a metal picket fence on the frame.
“Wickets made of metal picket fence,” explained an experienced installer, “are mounted exactly according to the same principle as gates.”
To ensure the finished look of a house or cottage, a variety of turnkey fences are erected. The fence is primarily intended to describe the outer boundary of the territory. And it has a practical meaning, for example, it serves as protection against the entry of unwanted guests, and ensures peace. And when choosing installation methods, the turnkey fence is considered the most profitable; its price includes all the hassle associated with installing the finished structure.
What turnkey fences can be and their features
Today, the buyer has a huge selection of fencing, which differs in appearance, pricing policy. The company, which offers its assistance when you decide to buy a turnkey fence in Moscow, provides different options:
- custom-made fences made of welded mesh with a polymer coating;
- metal picket fence;
- a denser fence - blinds made from a metal profile;
- gabion structures (they are a metal mesh filled with material, in this case stones);
- construction of temporary fences.
The rating of popular fences is headed by metal fences. Their main advantages are durability and resistance to various damages. This is exactly the option when you can spend money once on installing and purchasing the fence itself and not deal with this issue for 20 years.
When choosing a fence and installing it on your site, you should pay attention to nearby objects. It is worth ordering a high and solid fence if it is installed near roads or directly opposite the facade. But if there is nearby personal plot neighbors, then you should think about choosing a different fence so that it does not shade or interfere with the growth of plants. Also, a significant role is played by matching the style of the fence with the main appearance of the house.
Who can you trust to make a turnkey fence?
This task can only be entrusted to a proven large company. And we offer to order fences inexpensively without losing quality.
Professional staff will help you choose suitable option with individual consideration of the client’s wishes and terrain features. Because fencing is not only the right to feel protected and confident, but also an opportunity to show your wealth. Ordering a turnkey fence from us is simple and profitable, since our company works directly with material manufacturers, and the structures are manufactured using modern equipment.
Euro picket fence is an inexpensive, practical and aesthetically attractive option for fencing the dacha and yard of a private house. A fence and a gate made of a metal picket fence are easy to install with your own hands - the slats are screwed with self-tapping screws to the joists at some distance from each other. The design can be with or without a frame. Pillars for such a design can be made of any material.
If you place the pickets in one row, the area will be clearly visible from the street and will also allow light to pass through, Sun rays, air, which is important for the growth and development of plants. To block the view of the yard, boards are “stuffed” on both sides of the log in a checkerboard pattern.
Advantages
- Diversity color range, width (70 - 128 mm) and length (50 - 300 mm) of planks allows you to create interesting design, suitable for the exterior. The metal thickness is standard - 0.4 - 0.5 mm.
- The boards are made of galvanized steel, coated with a polymer composition on one or both sides - the coatings protect the metal from moisture and prevent the development of corrosion and burnout.
- Long period of use - from 30 years or more.
- The strength of the metal, the level of which depends on the type of profile - products are produced with a U-, M- and C-shaped profile, the latter is considered the most reliable - anti-vandal.
- Easy care - a fence with a metal picket fence does not require painting; it can be washed with plain water from a hose.
