Table made of furniture board for the kitchen. We make an original kitchen with our own hands from furniture panels. We make a cabinet from furniture panels (wood or chipboard)

you can quickly select the products you need, add them to your cart and place your order in just a few minutes.

Particular attention should be paid to storage conditions. Sheet material is sensitive to changes in its humidity, and especially to the heterogeneity of humidity on its planes. This may cause warping furniture board. The greater the deviation between the width and thickness of a furniture panel, the more sensitive it is to changes in humidity levels.

To maintain the stability of the shape of the furniture panel, it is important to leave the factory humidity indicators unchanged. Store furniture panels in a dry place at an air temperature of 20+/-5°C and relative humidity 65+/-10%. Leave the furniture board in a sealed package and keep it out of direct sunlight.

After opening the package, coat the surface of the furniture board with a water-repellent agent during the working day.

Furniture from our products

Tabletops, solid wood furniture, platforms, strings for stairs, steps, wooden window sills, door blocks, partitions, as well as built-in wardrobes and much more.

Examples of furniture made from our products:

Processing of our products is easy and does not require the use of expensive equipment. Using normal hand tools You can make environmentally friendly furniture from natural wood to suit every taste and budget.

In order to create furniture with your own hands and achieve the desired result, it is enough to have the desire and a little knowledge in this area. Currently, there is a wide variety of materials for the manufacture of furniture or its attributes - these are chipboard, wood or furniture panels. Whatever you make yours with my own hands, any piece of furniture in your home will become individual and exclusive. In addition, there will be no problems when choosing color ranges, shapes and desired sizes. Let's discuss how you can make a tabletop from a furniture panel with your own hands?

Main characteristics of furniture panels made using digital printing technology.

The countertop is one of the most important elements in the kitchen; it is the one that is subjected to significant stress and testing.

It is important that it can withstand high humidity, exposure to hot and sharp objects, and much more. It is for these reasons that it is better to approach the choice of material for making countertops with all seriousness and responsibility.

Speaking about furniture panels, you can note that such material is quite easy to work with and allows self-made both table tops and any other pieces of furniture. Most important rule when working with such material, this means following all instructions and following the rules, as well as the order of work and accuracy. If you strictly follow the rules, then you will not have any difficulties and the final work will turn out well.

It is also important to know that the choice of such material for making a countertop may not be entirely correct, since this material is not durable. If you drop something heavy or sharp on it, which is abundant in the kitchen, a chip or indentation will certainly form.

Tools and materials

• furniture board;
• self-tapping screws or self-tapping screws;
• electric drill with the necessary set of attachments;
• screwdriver;
• saw or hacksaw for cutting wood, router;
• a simple pencil;
• gun with special sealant;
• ruler or tape measure.

Return to contents

Tabletop manufacturing procedure

After all the furniture blocks have already been installed in place, well fastened, the final detail remains kitchen furniture- this is the installation of a tabletop from a furniture panel. The pre-prepared layer of the shield must be cut according to your drawing and measurements.

It is better to have the board sheets cut by specialists; you will only need to provide the dimensions you need. If you decide to cut it yourself, it is better to use a saw with thin teeth. When cutting, be sure to leave a margin of about 4 mm. Next, remove the excess using a router, be careful and careful so that it does not break when sawing due to its weight.

Due to the absence of cladding at the ends, they can be exposed to moisture and thereby deteriorate quite quickly. Therefore it is necessary to carry out necessary work for facing the ends of furniture panels using special aluminum strips. Such linings can be purchased in specialized stores; selection is made depending on the thickness of the fabric used. They come in both right and left, so be sure to pay attention when purchasing which side you will need the longer pad on.

Before you start screwing them in with a screwdriver and screws, you need to coat their ends with special silicone sealants. This is done using a special gun, which you can buy in the store. This will serve as good protection against moisture getting inside the panel itself, and will also prevent exposure to high temperatures from gas or electric stoves.

If the design of your kitchen furniture requires a longer tabletop, then you will need to make it from 2 parts, which will require butt joints. The joints must be covered with an aluminum plate, and parts of the tabletops must be tightened with a special screed. It is often customary to make one of the ends of the furniture leaf radius; here it is necessary to use PVC edges, it needs to be glued using a special device (vice).

Return to contents

Design Features

It is often necessary to install a sink into the countertop or hob. Here you will need to pre-cut a hole of the required size and shape for the appropriate sink.

For an accurate drawing, you can do the following: turn the sink upside down and attach it to the desired place in the future countertop.

Next, trace its outline with a pencil, make a small indent a few millimeters inside the already drawn line and draw another line. The second indentation will be necessary for its further attachment to the canvas.

Following the first line drawn in pencil, you need to cut out a hole for the sink. This can be done using a jigsaw or wood saw. Before starting drilling, you need to make a small hole in the layer, then insert a jigsaw into this hole and start cutting.

Speaking about the rectangular cut of the slab under hob, then you need to make holes for cutting first on all 4 sides of the table top. And the cut is made from one hole to another. After all the necessary cuts have been made, the cut areas must be carefully processed silicone sealant. Do not forget to remove excess after finishing work with the sealant, without allowing it to dry.

A tabletop made of furniture board must be secured with screws; they must be screwed into the board through slats on special cabinets. In case there are no strips, the panel is fastened using special corners.

The resulting gap between the tabletop itself and the wall must be covered with a special wall plinth, which has 2 parts. Part 1 is the basic one, it must be fastened to the tabletop, usually with self-tapping screws, and part 2 is decorative, it must be inserted into the groove on the main part of the furniture panel for the tabletop. The ends of the wall plinth must be closed with special profile plugs. That's it, the countertop is installed!

Furnishing your apartment with furniture made with your own hands solves several problems at the same time: low cost of repairs, the necessary choice of design and color options.

Everyone furnishes their home based on their own taste preferences and idea of ​​comfort. Even if you don't touch early stage finishing works, and immediately move on to the selection of furniture, many will have difficulties with its implementation. Furniture items can be purchased or made yourself. The first option is faster, and the second is cheap, interesting and exciting. We invite you to learn how to create a kitchen with your own hands from furniture panels, a master class from experienced craftsmen.

The kitchen frames created from furniture panels are original appearance, practical, highly functional and cheap decor for a city apartment or country cottage. Such operational parameters of a furniture set are ensured by the high characteristics of furniture panels. This is a very popular material today that can be found in almost every building materials store.

Such a wide prevalence of such material can be explained by the large list of advantages that are inherent in it:

• environmental friendliness, naturalness, absence of substances hazardous to human health, does not provoke the development of allergic reactions, has a pleasant natural smell;
• when laminating, furniture panels become resistant to moisture and deformation under mechanical stress, unlike natural wood;
• high strength, durability, practicality;
• low weight;
• hold fasteners well;
• screws, nails and other materials have a surprisingly attractive aesthetic. The laminated surface of the material is produced in a variety of color shades tree species, so you can make a furniture set that matches the color of the room;
• affordable price. Furniture can be conveniently made from such materials because its cost ends up being very affordable. In addition, kitchen doors are also made from furniture-type panels.

Furniture panels from which it is worth making a kitchen are practically free of drawbacks. Therefore, experienced craftsmen recommend that consumers concentrate their attention on this material. And how to make a kitchen on your own using furniture panels, we will tell you further.

Design

Before starting work on the manufacture of kitchen furniture from furniture panels, it is important to prepare a plan phased implementation work. It should contain information regarding:

• the type and composition of future pieces of furniture;
• materials and accessories that are relevant in the process of work;
• the necessary tools;

Some little things can make a big difference in practice. If you leave them unattended, some difficulties may arise in the future.

Next, you can proceed to creating a project. It is necessary to determine exactly how many cabinets, cabinets, wall corners, and shelves. All elements of the kitchen must be detailed: you need to carefully describe all the geometric dimensions of each piece of furniture. Calculate the current number of shelves and all types of fittings (handles, hinges, fasteners, magnetic fasteners). Consider the presence of a built-in sink, stove, hob, oven, gas water heater, washing machine. Decide on the type and shape of the facades, remembering that making too complex designs It may not work right away. Experienced craftsmen They advise you to evaluate your strengths; perhaps it will be easier and faster to order facades in a store. Also think about whether you want to equip the kitchen with glass doors and shelves. Such elements kitchen set will need to be selected in advance.

After the project is created, you will need to purchase everything necessary materials, cut furniture panels. If this stage of work was carried out without errors, you will only need to assemble the individual parts into a complete structure.

Materials and tools

Making a kitchen frame yourself is an excellent way to show your own skills, talent, and individual taste. In addition, this is a great way to decorate your home without huge material costs. A high-quality exclusive furniture design, created with your own hands, will become the real pride of the home owner.

To make a kitchen from furniture panels you need to acquire the following materials and appliances:

• furniture panels in the required quantity. The material parameters can be different: width in the range of 200-600 mm, length - 600-2700 mm;
• screwdriver;
• Sander. If it is absent, you can limit yourself to finely dispersed sandpaper. However, working with it may take some time;
• self-tapping screws;
• electric drill;
• wood saw or electric saw;
• centimeter, long ruler;
• a simple pencil;
• varnish coating;
• Screwdriver Set;
• various kinds of accessories.

This is the simplest and most affordable list, but it can be expanded if desired. Much depends in this case on the complexity of the structure and design of the future furniture. The main thing is to work in compliance with all safety standards, then the work will be fast and interesting.

Furniture panels

Tools for assembling a kitchen set

Before we talk about the features of its manufacture, let us explain what a furniture panel is. In practice this natural material in the form of wood sheets. They may have different shape and are intended for the production of furniture and stairs. The most common furniture panels are made from coniferous species wood, a little less often found on domestic market birch or oak.

To create furniture panels, manufacturers use fairly small elements, so the material is quite low in cost. Prices for solid boards are indeed much higher, but the performance parameters are almost at the same level.

If high-quality, well-dried wood was used in the manufacturing process of furniture panels, then it will have high performance parameters. Therefore, when purchasing material in a store, it is important to be vigilant and prefer a higher quality option.

Assembly steps

To assemble furniture from furniture panels for the kitchen, as in the photo, you will need to perform a number of actions in a certain sequence and prepare drawings. It all depends on what particular piece of furniture is being manufactured. We will describe the most relevant options for the kitchen below.

Table

The process of making a kitchen from furniture board can be started by creating it yourself dining table. A table made from such materials is practical, strong, and durable. Possible table shapes made from furniture panels and methods for their manufacture are described in the table

When the tabletop is made, it is reinforced with stiffening ribs on the bottom side using bars. Next, elements for fixing the supports will need to be screwed to this element of the future table from the shield. Drill holes for them in advance. Finishing table involves final sanding of surfaces and painting with varnish.

Preparing furniture panels

Cutting out the oval part of the tabletop

Multi-layer varnishing process

Preparing the table legs

Veneering of countertops

Underframe diagram

Attaching the legs

Closet

You can also make a kitchen cabinet yourself from furniture board. On initial stage It may seem that the task is overly difficult, but this is not entirely true. All work is divided into three stages:

• preparatory work involves the preparation of current tools, materials, and the creation of a product design;
• assembly - since the cutting of the product parts is done in advance, you will need to assemble them into a single structure. To do this, take a screwdriver and self-tapping screws. Alternately attach the sides to back wall structures, then the lid and bottom. As a result, you only need to attach the facade and support legs so that the kitchen cabinet is ready. If you plan to move the structure during operation, it is better to prefer wheel supports. If the cabinet at the end of the work seems too low, select supports for it with a function for changing the height;
• finishing work involves sanding, varnishing or painting the surfaces of furniture boards, and decorating the cabinet with a handle.

Assembling the cabinet walls

Designing the bottom of the cabinet

Fastenings

Making the door

Finished kitchen cabinet

Hanging elements

A kitchen made from furniture panels often includes hanging elements. These are easy-to-use shelves and cabinets that are characterized by high capacity and practicality. The schemes for their creation are quite simple, and the work on their manufacture will take a matter of minutes. But when making such furniture, it is important to take into account their features. And they lie in the method of their installation on the wall surface. Installation is carried out using special loops, which are fixed in the upper corners of the rear wall of the cabinet.

By correctly calculating the weight of the cabinet along with its contents, you can create a comfortable kitchen. To do this, determine how much kitchen utensils you plan to store in one or another wall cabinet, because excessive loads for wall-mounted structures without reinforced fastening elements are not acceptable. For a beautiful set of dishes, you can prepare an open shelf, for bulky pots - a spacious corner cabinet with reinforced fastening.

Finishing process

After assembly, kitchen structures made from furniture panels can be opened with varnish, which will significantly increase the resistance of the surfaces to wear and give them an attractive appearance. To do this, the furniture is sanded, varnished, and dried indoors. Do not forget that drafts will only spoil the process. Lacquered cabinets and cabinets look classic, laconic, and stylish.

Almost the same technology is used when painting furniture made from panels. Only after sanding should the surfaces be coated with primer, and only after that should they be painted. Then the paint will stick better. If you want to use some original idea, then it is better to refuse varnish and paint.

We will describe the simplest, but at the same time very interesting ways decorating kitchen furniture that was made independently, without the help of professional furniture makers and expensive equipment, namely:

• using photo wallpaper - cover parts of the cabinet with newspaper and secure it with tape. Photo wallpaper will subsequently be pasted in these areas, and the remaining parts can be painted;
• we create the effect of antiquity - for this decoration technique you will need to use foam baguettes with curls. They are cut and using liquid nails fixed on cabinet doors. Next, the entire structure is painted, and after the paint has dried, some abrasions are left in the corners and on the curls with sandpaper. If you want gloss, then you can use a sponge to apply golden strokes to the curls of the baguette.

The following video details design options for DIY kitchen furniture made from panels.

Making furniture from furniture board, wood and chipboard with your own hands is a great way to get something that meets all your expectations. Any piece of furniture made with your own hands will not only be exclusive, but also fit perfectly into the surrounding interior, because its color, shape, size will be whatever the creator of this furniture wants.

From wood panels you can make a wide variety of furniture yourself - tables, cabinets, chests of drawers, beds, etc. The main thing is to carefully follow the sequence of the described actions and work as carefully as possible.
Basic materials and tools used for making furniture from furniture panels:

· Wooden or chipboard furniture panels;
· furniture varnish;
· self-tapping screws;
· electric drill with a set of drills;
· chisel;
· screwdriver;
· grinder;
· hacksaw for wood;
· ruler and simple pencil;
· various accessories:
o handles for drawers and doors;
o hinges for doors;
o guides for sliding furniture elements, etc.

Make your own furniture from wood: we make a table from wood, chipboard or furniture board

The table is an indispensable part of the interior, so you want such an important item to be multifunctional, strong and serve for many years. Making the table yourself will provide confidence in its reliability and durability. Homemade furniture board can be an ideal material for such furniture.
Today there are many variations of tables - computer, desk, kitchen, folding, etc. Let's try to analyze the manufacturing sequence of some of them in all details.
Computer desk made of furniture board (wood or chipboard)
A computer desk will allow you to save precious centimeters of space and place all the components of your computer in convenient and easily accessible places. To make such a table you will need 8 furniture panels: three measuring 2000x600x18 mm, three measuring 2000x400x18 mm and two measuring 2000x200x18 mm.
Additional materials and tools required for manufacturing computer desk:
· edged board 12x120 mm;
· dowels;
· plywood sheet 6 mm thick.
The process of making a computer desk.

Initially, a drawing of a computer desk made of wood or chipboard is developed and dimensions are calculated.

From one of the furniture panels (the largest size) we cut out a tabletop, side walls, bottom and top of the cabinet. The corners of the sides located in the upper front part can be trimmed and sanded. In that part of the sides that will be located close to the wall, it is necessary to cut a recess for the plinth measuring 5x5 mm.

To ensure the rigidity of the structure, in the middle of the side of the internal vertical wall we cut out a 200x20 mm recess for installing a transverse panel, which we make from a panel small size. We fix all the finished parts with self-tapping screws.

We are making a place for the system unit. Don’t forget to round off dangerous corners and make recesses for the baseboard.

We hide the voids under the cabinet and space for the system unit with slats.

We make a frame for the shelves above the table and attach it to the assembled elements of the table.

A medium-sized sawn furniture board will serve as a blank for the top shelf, and a small board will serve as a middle partition attached to the tabletop.

Above the cabinet there will be a shelf with a lintel, which we make from the smallest furniture board. We install it in the right place.

It's time to make drawers - the walls are made of edged boards, and the bottom is made of plywood. We connect all the elements using self-tapping screws. We install guides for drawers and for a pull-out shelf-table top.

We cut out a table top for the keyboard from a 400 mm wide panel. We use the cuttings of the shields on the front elements of the boxes.

We disassemble the entire structure, process it with a sander and cover each of its components with a two-layer ball of varnish.

Let the varnish dry, perform final assembly table, install the handles - and our computer desk is ready!
Desk made of furniture board, wood or chipboard
Such a piece of furniture as desk is an indispensable element of a student’s office or room. There is always room for books, notebooks and work documents. To make such a table, you need three furniture panels of different widths - 200, 400 and 600 mm, as well as other basic materials and tools listed at the beginning of the article.

• sheet of plywood 6 mm thick;
• block 20x20 mm;
• square

The process of making a desk.

In general, the process of making a desk is practically no different from the process of making a computer desk. The only difference is that the desk is a more massive structure containing more drawers, shelves, and niches. First we make a drawing of the product and mark all the dimensions.

We make the tabletop from the largest panel - we cut it out, round the corners, fasten it, and reinforce it with bars.

We cut out pencil cases from medium-sized furniture board. The upper corners of the sides are rounded.

We cut out shelves measuring 400x350 mm, as well as doors for niches. Having cut out the blanks for the plinths, we complete the manufacture of the frame. Having cut two squares measuring 70x70 mm from plywood, cut them diagonally. The resulting triangles must be placed on the back side of the frame. We align the frame using a square and fix it with triangles.

The frame is ready.

We cut out and install the shelves at the distance corresponding to the drawing.

We install the guides.

We cut out the parts of the boxes and fasten them together.

We cut out and install the doors.

We disassemble our table into its component elements and, after carefully treating it with a sander, open it with two layers of varnish. We finally assemble the product. We fasten the tabletop with bolts. We install the shelves and plinth on corner holders. We mount the fittings, having previously made holes in the fastening areas.

All is ready.

Kitchen table made of furniture board, wood or chipboard

The kitchen table is one of the most necessary things in the house. Such a table can always be used both in a small apartment and in big house, and at the dacha.

The basic materials and tools required to make a kitchen table from wood or chipboard are listed above. The size of the furniture board used should be 2000x600x18 mm.
Additional materials and tools needed to make a desk:

• timber 40x40 mm;
• legs;
• socket nuts with a diameter of 12 mm;
• spanners.

The process of making a kitchen table.

We make a tabletop.

We add rigidity to the tabletop by reinforcing it with bars.

We prepare areas for the legs (drill holes, install fasteners). Attaching the legs

We sand the tabletop and seal it with varnish

Let the product dry and enjoy the result of your labor.

So we have given examples handmade three options for a table made of furniture board. What other furniture can you make from furniture board, wood or chipboard with your own hands?

We make a cabinet from furniture panels (wood or chipboard)

A cabinet made from furniture board, the manufacturing process of which is described below, will fit perfectly into the interior of a nursery or hallway. All dimensions given in the description of the work can be adjusted at will.

The basic materials and tools that will definitely be needed to make any furniture from a panel have been described above. In this case, you will need 7 furniture panels: three with dimensions of 2000x600x18 mm, three with dimensions of 2000x400x18 mm and one with dimensions of 2000x200x18 mm.

Additional materials and tools needed to make the cabinet:

· hardboard sheet;

· plywood sheet 6 mm thick;

· rod for hangers;

· two bars for fastening the rod.

The process of making a cabinet.

We make the sides of the cabinet from panels, shortening the width of each by 70 mm, since the depth of the cabinet, according to the standard, should be 530 mm. In the lower corner of each sidewall it is also necessary to cut a 50x50 mm recess for the baseboard.

We make the bottom and top of the shelves for the drawers - leaving 775 mm width when sawing the board. The height of the boxes should be 200 mm, and the gap between them should be 20 mm.

The top of the cabinet should be slightly wider than the shelves for drawers - 800 mm.

Using self-tapping screws, we attach the bottom of the cabinet to the sides at a height of 50 mm above the floor, and the middle part at a height of 420 mm. We use a shield 400 mm wide as a shelf for hats; it must be fixed at a distance of 200 mm from the top. We fix the base using corner holders. The hardboard sheet will serve as the back wall of the cabinet. We carefully fasten everything together with self-tapping screws - and the frame is ready.

We fix the retractable mechanism for the drawers close to the sides, since front sides the boxes will be overlapped.

We cut out the drawer elements from plywood. During the sawing process, we make holes every 100 mm along the workpiece so that the plywood sheet does not crack during assembly. We assemble and insert the drawers into the closet. We make the front parts from the narrowest panel, but they will need to be attached only at the very end of assembling the cabinet.

We cut the doors out of a 400 mm wide panel and do fittings - the doors should cover the middle shelf. We cut off the corners on top of the doors and sand them with a machine until they form smooth transitions between the parties. We drill three holes for hinges on each sash. We install hinges and fasten the doors.

Bars with drilled holes We attach it under the bar to the sidewalls using self-tapping screws.

We disassemble the furniture and coat each component with two layers of varnish. Let the varnish dry well and assemble the cabinet.

We make holes for handles in drawers and doors. We install the facades, mount the handles, while connecting the plywood part of the drawers, located in the front, and the front part made of panels. We check that everything is securely fastened. The cabinet is completely ready. It's interesting to know that your old wardrobe can gain new life at .

Making a chest of drawers from wooden or chipboard furniture panels

The chest of drawers is a universal piece of furniture. It is multifunctional and practical, so it will find a place in the nursery, in the hallway, and in the bedroom. To make a chest of drawers, the first thing you need to do is purchase a furniture board measuring 2000 x 400 x 18 mm. Other basic materials and tools that will be required in the furniture making process are listed at the beginning of the article.

Additional materials and tools needed to make a chest of drawers:

• a sheet of plywood, the thickness of which is 6 mm;
• dowels.

The process of making a chest of drawers.

After developing the drawing and establishing the dimensions of all the necessary parts, we cut out the frame elements from the panels and fasten them with self-tapping screws. In the back wall we make a cut under the plinth measuring 50x50 mm.

For aesthetic reasons, the lid is attached to the frame not with screws, but with dowels.

Cut out the sides and ends of the drawers. External elements are also cut out, but are not attached to at this stage. We attach the retractable mechanisms for the drawers (you don’t have to buy them, but make them yourself), and check their functionality.

We disassemble the frame and polish each component. We open the elements of the chest of drawers with furniture varnish, after complete drying we reassemble the frame and insert the drawers.

We drill holes in the drawers and their loose external elements and fasten them with handles.

It turned out to be a great chest of drawers!

Making a hallway from wood, chipboard furniture panels

The hallway, the manufacturing process of which is described below, has a number of advantages:

• multifunctionality;
• aesthetic appeal;
• naturalness;
• the ability to help create order.

Before starting work, you need to prepare the basic material and tools, the list of which is given above. When making a hallway, you will need 10 furniture panels: seven measuring 1600x400x18 mm, three measuring 2000x400x18 mm.

Additional materials and tools required for making a hallway:

• seven edged boards 2000x120x16 mm;
• two tongue and groove boards 2000x240x18 mm;
• three-meter rail;
• six-millimeter sheet of plywood;
• dowels.

Hallway manufacturing process

We begin the work by making a cabinet 820x400x400 mm. To do this, we use one of the 1600 mm long shields on its components. Don't forget to make a groove for the baseboards. We connect all the manufactured parts with self-tapping screws, except for the bottom strip - we fasten it with dowels.

We cut out the door for the cabinet, install the fittings, and install the door.

We also make the retractable mechanism for the cabinet ourselves from strips of plywood 20 and 40 mm wide. After installing the mechanism, we check its operation.

We cut out the parts for the drawers and connect them with self-tapping screws, having previously drilled holes for them. We also cut out the fronts of the drawers, but do not install them until the product is fully assembled.

We attach the upper part of the cabinet with dowels.

We cut out the parts and assemble the second cabinet 820x500x400 mm. We manufacture and install doors.

A two-meter furniture board will serve as material for the pencil case. We cut out the constituent elements of the pencil case and fasten them together with self-tapping screws. Remember about the recesses for the baseboard.

“Plywood corners will help enhance the rigidity and reliability of the structure.

We outline the places where the shelves will be attached, and calculate the distance between the boards that we will screw to the rail.

We cut out and install the top shelf intended for storing hats. To install it, you will need leftovers from previous cuts.

We disassemble, sand and varnish the entire structure.

After the varnish has dried, we reassemble the hallway and fasten it to the wall with self-tapping screws. At the end we screw the handles. Product completed!

Making a bed from wood or chipboard furniture board

A wooden bed is what you need, because furniture board made of pine needles is an environmentally friendly material. The project provides two spacious drawers and sides to prevent the child from falling.

Initially, we prepare the main material and tools, a list of which is given at the very beginning of the article. The main material is furniture board 2000x200x18 mm.

Furniture board is durable natural wood, which is produced by gluing lamellas from various types of wood in a press. Many people underestimate this material because they mistake it for waste. carpentry production. Special safe compounds are used to glue wooden slats, which makes it possible to use the furniture board as a tabletop. Furniture with such a tabletop looks expensive and creates a special atmosphere of comfort and home comfort. If you need a tabletop made of furniture board, then you can order natural material from Siberian larch or pine from the Larix company.

Advantages of furniture panels for making countertops

Furniture panels can be made from any type of wood, which determines its main characteristics. We offer our clients lumber from Siberian larch, which has many advantages:

• increased strength;
• environmental friendliness;
• aesthetic appeal;
• heat resistance;
• durability;
• resistance to temperature changes;
• resistance to rotting and deformation.

These characteristics make it the best option in terms of price and quality for the production of a kitchen countertop, because it is always in sight and will be subject to significant loads.

Which type of furniture board to choose

There are three types of furniture panels:

• extra-class - uniform in texture, has no defects in the form of cores and knots, consists of solid lamellas;
• grade A – without defects, even in tone;
• grade B – characterized by uniform color and the presence of small knots.