Construction staplers: mechanical, electric, pneumatic. How to choose a construction stapler: advice from a professional Pneumatic stapler which one to choose

Furniture stapler is a fairly universal tool with which you can not only perform furniture upholstery procedures, but also a number of other construction operations.

Today there are different operating principles:

pneumatic,
electric,
manual.

Pneumatic staplers are used in industry, and electric and manual staplers are used in everyday life. Models belonging to the latter type are the most common in the furniture industry due to their mobility and ease of use. Let’s use this example to look at the principle of operation, operation and repair of furniture staplers.

However, before moving on to this procedure, I would like to say a few words about staples and their varieties.

The main indicator that is taken into account when choosing a bracket is its depth. Depending on the nature of the work performed, this indicator can vary from 4 to 14 millimeters.

So, for example, in order to carry out the procedure of upholstering furniture with fabric, a staple with a depth of 8 millimeters will be sufficient, while for fixing thicker materials, a staple with a greater depth should be selected.

Also, depending on overall dimensions, staples are divided into the following types:

53 - is the most common. Staples of this type have a width of 11.4 millimeters and a thickness of 0.7 mm. Depth of this fastening element varies from 4 to 14 millimeters;
140 – having the following characteristics: width – 10.6 millimeters, thickness – 1.2 mm, depth – similar to the previous type;
36 – this marking means that the stapler can shoot staples that have a semicircular shape and are mainly used for cable installation;
300 - These are special nails intended only for the stapler.

When choosing a bracket, you should also take into account the structure of the material from which it is made.

Regular steel staples work just fine on regular wood. However, if you are dealing with particle boards or plywood, you should purchase staples made from hardened steel, as regular ones may simply bend.

Manual construction stapler has a magazine into which a clip with staples or special nails is loaded. The bracket is hit by a firing pin, which is attached to the firing pin. The size of the striker in the tool depends on the dimensions of the consumables (staples) used. The hammer, in turn, touches the spring, the degree of compression of which is adjusted by a special screw. The shock is absorbed using a shock absorber located inside the stapler.

See the diagram for the device of the stapler:

Stapler device with a twisted mainspring

A coiled mainspring is installed on inexpensive models.

Manual stapler with a leaf (spring) mainspring

A stapler with a leaf spring is more powerful and expensive.

How to use a stapler

Refueling

In order to load the stapler with staples (i.e. load the staple gun), you must first move away the spring intended for pressing them. The staples themselves are placed in a special groove, in which, in fact, they need to be placed. After this, the spring is put in place. The tool is completely ready for use.

Video: how to thread a stapler with staples

Now you know how to insert staples into a stapler, we can proceed directly to work.

Shot

In order to fix necessary element, you should firmly attach the device to the place where you plan to hammer the staple. After this, without lifting the device from the surface, you must press the trigger button (lever). If these manipulations are successful, you will hear a characteristic sound and see a staple inserted into the material.

In order to protect yourself when working with a construction stapler, you should follow some rules:

If you use a mechanical model of the device, it is necessary to adjust the screw regulator. This operation should be performed on a piece of rough material by rotating the screw from minimum to maximum. If the staple goes in all the way from the first shot, you can start working on the “finishing” part. Otherwise, re-adjustment is required;
In order to drive the staples at the same distance, you should first mark the necessary places with a pencil or ballpoint pen;
Hold the material with your free hand so that when firing it does not move from the pre-designated place;
Keep track of the number of staples in the “store” so as not to be left without a single fastening element at the most inopportune moment;
After finishing work, secure the handle with the safety catch to prevent spontaneous or accidental firing.

In addition to all the above tips, you may also need help repairing this construction tools, since the stapler, like any other equipment, tends to break.

Repair

The most common reason for stapler failure is impact mechanism failure. However, in order to get to it, you must first disassemble the tool. This can be done by performing a number of simple operations:

Remove the adjusting screw;
Remove the spring;
Remove the protection cover;
Remove the pins;
Remove the lock washers.

If the list of actions does not make it clear to you how to disassemble the stapler, then you can see this in the video below.

After performing all the above manipulations, you will be able to see the drummer, which, for the most part, fails due to the exhaustion of its resource.

In order to repair this element, you should remove it, place it in a vice and, using an ordinary file, give the striker its original shape.

That's it, the repair is completed, and the instrument is again in full combat readiness.

Tips on why the stapler does not work and how to fix it:

If your tool does not finish (does not finish) the staples, then try tightening the spring, it may have weakened;
If a construction stapler bends the staples, try adjusting the spring tension bolt (relax or tighten, experiment). Another probable cause of malfunction is a mismatch between the type of staples and the structure of the material - for chipboard and plywood it is recommended to buy staples made of hardened steel;
If the staples do not come out of the stapler, but bend and get stuck inside, perhaps the striker (tongue) that pushes them has become rounded and needs to be sharpened;
If the mechanism itself works, but the staple does not fire, it is possible that the staple does not grip, or the firing pin has worn out. Try filing the firing pin and turning the damper with the other side.

Watch the video to see how to repair a staple gun with your own hands.

Video: do-it-yourself stapler repair

How to disassemble a furniture stapler, what to do if it jams. What could be the reason, what to do if the construction stapler does not fire staples:

The real-time video shows step by step how to disassemble the stapler, what could be the cause of the breakdown and how to fix it yourself, as well as how to assemble the stapler.

Video review of staplers

You can also watch a short video on the review of furniture staplers, as well as the principle of filling, setting and working with them:

Good luck to all home craftsmen, if you have any questions - write!

A furniture stapler is widely used in the household; with its help you can easily nail down greenhouse film, cover furniture with fabric, and it will also come in handy in other situations. The variety of models will confuse an ignorant person, so in this article you will find useful tips choose how to use it, which brackets are suitable for which models.
There are a wide variety of home staplers on sale; the first thing you need to pay attention to is the type of staple. The most popular and frequently used type of staple is type 53. Most models use type 53. This type has the following dimensions: staple width 11.4 mm, thickness - 0.7 mm. Of course, you don’t need to know these dimensions, you just need to know what staples your “pigalle” works on and their type.
Secondly, how deep staples can be driven in.
Furniture guns can be simple (staples 4-8 mm deep, inexpensive). Most often made of plastic, intended for infrequent use. Only small staples are used, so they can only be used to nail fabric or paper. Cheap and simple, the price is about 100 rubles. Like these ones.
There are also options 4-10 (staples from 4 to 10 mm inclusive). Such pistols are already made of metal, although there is no adjustment screw. Yes, it is of no use, the staples can be driven in 10 mm without maximum adjustment. As a rule, type 53 staples are used.
Staplers 4-14 mm (the very first photo in the article). The most popular and best-selling. Made of metal, solid, high quality.
Use staples 4-14 mm deep with 53 type. The main difference from others is the presence of an adjusting screw, with which you can increase or decrease the impact force. As a rule, if the staple is more than 10 mm deep, then the screw must be tightened in the direction of increasing the impact force, otherwise the staple will not completely enter the wood. A wide range of bracket sizes (4,6,8,10,12,14 mm) will allow you to choose the optimal depth for the job. Of the good models, we can highlight the Zubr company - reliable and high-quality, price 330 rubles.
Also among the household models, it is necessary to highlight the model with bracket type 140. It is thicker and has the following dimensions: width 10.6 mm and thickness 1.2 mm. If you load type 53 staples into a type 140 stapler, it will shoot 2 staples at a time. Therefore, it is so necessary to know the type on which “pigalle” works. Most often, guns with 140 type support several types of staples, these are small nails and semicircular staples for driving in cables. You could say that this is universal option, who is a pleasure to work with. However, it does not support the most popular type 53 bracket. The Stayer stapler, shown in the photo below, supports 4 types of staples: type 140, type 300, type 500 and type 36. Its price is 650 rubles.
Bracket type 53
The most used, used in most staplers.
Rectangular
Bracket width 11.4 mm
Thickness 0.7 mm.
Dimensions (depth) 4-14 mm.
Sold in packs of 1000 pieces
There are 2 types: hardened and simple. Tempered ones are used for strong or laminated wood (chipboard). Regular staples are 2 times cheaper and are designed for soft wood.
Type 140
Powerful, thick staples are also used for fastening material to wood, plywood, and chipboard.
Rectangular bracket.
Width - 10.6 mm
Thickness - 1.2 mm
Sizes 4-14 mm
Packs of 1000 pieces.
The cost is higher than that of type 53 staples.
Type 36
Semicircular brackets for cable fastening.
Bracket width - 7.6 mm (cable with a diameter of no more than 6.4 mm can be pinned)
Thickness - 1.2 mm
Dimensions - 10, 12. 14 mm
Type 300
Small carnations with a T-shaped head. Used for fastening to wood, wood, chipboard.
Nail thickness - 1.2 mm
Sizes - 10, 12 and 14 mm.
Type 500
Carnations without a cap (finish type). In general it looks like type 300, only there is no cap.
Dimensions - 10,12, 14 mm.
If you are doing furniture production and use the corresponding tool constantly in hard mode, then ordinary household models will not last long. Therefore, there are professional options for such purposes. The RAPID tool has proven itself to be excellent. This company specializes in the production of only furniture guns, so they are of excellent quality. However, their cost is rather high, for example. A standard gun for type 53 staples costs 2,200 rubles. However, according to reviews from customers who bought a couple of these models from us, they are very strong. Before that, they bought ordinary household ones, but they often broke down. Therefore, it was decided to buy 1 professional one for testing - it outlasted 10 conventional staplers. As you can see, the difference is simply huge. For home use An ordinary inexpensive one, for example from the Zubr company, will suffice.
How to insert staples
For those who are picking up a stapler for the first time, this can be a problem. But after the first time you will learn right away, nothing complicated. Here's a photo for you.
First, take out the “staple pusher” with the spring from the gun, then insert the staples with the point down and push them in with the “spring thing” until it clicks into place.
Preparing the stapler for use
Pull out the latch that is located at the back of the stapler.
Insert the staples into the special groove. The staples should be inserted with the tips facing down. (P)
Reinstall the valve and spring
The stapler is ready to use.
How to use a stapler
Place the stapler firmly against the surface where you want to drive the staple.
Without lifting the stapler from the surface, press the lever until you hear a characteristic sound. This action will require mechanical effort.
If the staple does not fly out, it means it is stuck and you need to get it out by completing 4 steps to prepare the stapler for use.
Ready. The staple has been successfully driven in.
To avoid injury furniture stapler It is important to thoroughly understand how to use such a tool. If you are using a mechanical stapler, first adjust the adjuster screw. The adjustment must be made to rough material, rotating the regulator from minimum to maximum. If the fastener does not enter the material from the first blow, then you will need to adjust your furniture stapler again, and if it does, then start working on the “finishing” part.
To drive staples at the required distance, it is best to mark such places in advance using a pen or pencil. You can also use a clamp, which must maintain the same distance when driving in fasteners without preliminary markings.
Don’t forget to also hold the material while making shots so that the material cannot move when driving in the staple. Do not forget to also monitor the presence of staples so as not to be left without them at the most inopportune moment for you.
When the tool is not in use, secure the handle with the safety lock. This is required for safety reasons. When doing these simple recommendations, you can easily cope with upholstery of a sofa or other necessary task associated with a furniture stapler; the price always depends on the type of tool and its manufacturer.
Construction stapler repair.

When there is a need to quickly fasten sheets of paper, a stationery stapler is usually used. But with more complex work It is convenient to use a more powerful tool called a tacker. With its help, you can not only reupholster furniture, but also attach carpet to the floor, install wiring, etc. Each job has its own specifics, and therefore requires the use of a certain type of tool.

How to choose a stapler for reupholstering furniture: main varieties

On the market today you can find three main types of staplers for upholstering furniture, among them:

pneumatic;
electric;
mechanical.

The latter variety is an inexpensive classic. Home craftsmen like these tackers. The design has only three nodes:

spring;
lever arm;
frame.

When the operator acts on the lever, the spring mechanism is activated. The spring expands and drives nails or staples. If you want to find such a tool, you should prefer a model with a collapsible body, the elements of which are secured with screws, but not rivets. This, if necessary, allows you to clean the instrument, eliminating minor problems.

If you are faced with the question of how to choose a furniture stapler, then it is important to pay attention to the casing material, which must be durable. When it is made of steel, it is good if it has additional chrome, nickel or powder coating. But sometimes the case is made of modern light alloy, which is the best solution.

Description of mechanical type

Quite often, consumers decide how to choose a furniture stapler for their home. To get the answer, it is recommended to consider mechanical models. They are low in cost and will be affordable for every consumer. This tool is suitable for small-scale household work. However, if you are engaged in furniture upholstery professional level, then it’s better to consider another type of device, because you won’t be able to work quickly with such a tacker; your hand will get tired from prolonged effort. Experts recommend that professionals consider pneumatic or electric devices.

Description of electric staplers

Before choosing a furniture stapler, you should pay attention to electric models, which are more expensive, but are distinguished by their reliability and speed of work. By pressing the button you will activate the impact mechanism. There is no need to make any special efforts. Even a fragile woman or child can cope with such a task.

Things will go faster if you use such a mechanism, abandoning the mechanical option. Yes, and it will be possible to penetrate harder materials, and the joints will be quite strong and reliable. You can understand how to choose the right furniture stapler by looking at networked electric models that have a cord. Sometimes this becomes a real problem, because the cable can limit the area of use. For example, if you are far from the outlet, the wire may not be long enough.

When is the battery type suitable?

However, you can use an alternative solution and purchase a cordless stapler. It will be quite heavy, and the operator’s hands will get tired after a while. Any electric model will be much heavier than its mechanical counterpart. Before choosing a furniture stapler, you should take into account that you will have to pay quite a high price for an electric model. Therefore, if you are purchasing a device for personal needs and will use it from time to time, then it is not recommended to spend so much money on it.

Recommendations on when to purchase a pneumatic stapler

If you need a furniture stapler, how to choose, the price will decide. On average it is 500 rubles. But it is also important to take into account the purpose, as well as operating conditions. For example, for stationary use A pneumatic stapler is more suitable than others. It is quite convenient and operates using air that is under pressure.

Such a tacker performs its task with lightning speed. The pneumatic model weighs much less compared to the electric one. But in this case, there is a catch, expressed in the fact that along with the stapler you will also have to purchase a compressor, paying additional money for it. This option is best purchased for stationary work. Pneumatic models are purchased for production conditions.

If furniture needs to be upholstered at the factory, then it is better to equip workplace using this option, because the stapler and compressor do not need to be moved anywhere, in addition, pneumatics allow you to carry out work quite quickly, providing excellent results.

Selecting a stapler by manufacturer

Before choosing a furniture stapler, you should also take into account the status of the manufacturer in the market for the relevant products. It is important to pay attention to the purpose and additional features that are not always needed in everyday life. That is why a number of consumers choose the Piranha X70005 household stapler, which weighs 566 g. The rubber insert has shock-absorbing characteristics, and on the body there is a ring for securing the handle in the lower position.

Another one household model- Rapid R453, it weighs less than 356 g, has a shockless lever release mode, and also allows you to fix the handle in the lower position, as in the option described above. Additionally, this stapler has the ability to work with round staples.

But if you need a professional tool, then you should pay attention to the Arrow JT21CM. This model weighs 436 g, but some consumers note one of its disadvantages, which is the not very comfortable handle; it slides off during operation.

Alternative solutions

The Novus J-19 EADHG model will be more convenient, which has a rubberized handle and weighs 1024 g. This professional tool has a multiple impact mode, a safe reloading system and a remote stop. There is a special latch to fix the handle in the lower position, and a plastic hook allows you to hang the tool on your belt if necessary. The Rapid R353 model has an impact-resistant rubber insert on the body; it weighs 886 g, and also has a shock-free release mode, which simplifies operation and makes it more comfortable.

Features of choosing staples

Quite often, home craftsmen and professionals wonder how to choose staples for a furniture stapler. They are the simplest, in this case their depth varies from 4 to 8 mm. Such consumables will not be so expensive. They are intended to fulfill simple work. They can pierce paper and fabric.

You can choose options ranging from up to 10 mm. They are used in semi-professional staplers. Some models use type 140 staples, they are thicker and have a thickness of 1.2 mm. In this case, the width reaches 10.6 mm. You should not purchase type 53 staples for such staplers, since in this case the equipment will shoot 2 staples at once. Therefore, it is important to ask what type of clamp the tool uses.

Semicircular staples are intended for driving in cables. But if you have a stapler from the Stayer company, then you should know that it supports four types of staples: 143, 100, 500 and 36. If you have already decided which furniture stapler to choose, then you should pay attention to consumable material, which can be hardened and is used for laminated wood or strong chipboard. Usually like this Consumables cost twice as much as usual.

A construction stapler is a relatively simple, but at the same time multifunctional tool. It is loaded with staples or nails, with the help of which various materials are nailed, for example, film, chipboard, lining. The device is inherently more powerful analogue office stapler . There are products on the market that use various energy sources to operate. To choose the right tool among the variety of modifications, you need to know the advantages and disadvantages of each type, and also take into account the nature of the work to be done.

With a construction stapler, due to the different fasteners used and functional features There are many other names, the main ones being:

staple gun;
nailer;
staple gun;
tacker;
stapler.

In any case, the device performs the following tasks:

connects identical parts to each other, while the staples are bent;
joins different materials together, for example, plastic, plywood (nails them).

The staple gun has become widespread among furniture makers, builders, decorators. The device can be easily held in one hand while performing work. In practice, it replaces a hammer, while labor efficiency and productivity increases, and workers are less tired.

Using a stapler, the following work is performed:

lay the roof;
attach glazing beads to the windows;
attach insulation, roofing felt, film and similar materials;
fixed to the surface different materials wires and cable;
make drapery;
attach furniture upholstery and decor;
assemble or repair pallets;
perform facing work;
connect sheets of plywood, chipboard, OSB, fiberboard and other sheet materials to the frames.

A furniture stapler, like other types of tools, allows you to perform many different work operations. In many cases where you need to attach something, you can use a staple gun. The device is constantly used for upholstery different materials.

The main criterion for dividing staple guns into separate groups is the type of energy that underlies their functioning. Based on this feature, the following types of staplers are distinguished:

mechanical;
electrical;
pneumatic.

Each type of product has its own characteristics (pros and cons), which determine the area of application. Let's consider which tool is best suited for a certain type of work.

Mechanical models

Mechanical type staple guns are products with the most simple device, when compared with analogues. The mechanism works from influence of hand force. The tool's performance is low, but it is relatively durable and strong.

Design

Spring– this is the main one structural element mechanical type staplers. It can be of spring (plate) or twisted type. If a tool is equipped with a spring of the first type, then it is considered to be of better quality, since its recoil is lower and less noise is produced during operation. But devices with twisted spring mechanisms are cheaper. It should be taken into account that the impact force of a mechanical tool is determined by the power of the spring installed on it: the greater its potential, the easier it is for the staples to be driven into the surface.

One of the main components of the tool is also a mechanism that regulates the penetrating force of the device. Settings are carried out using a switch or a wheel. Regulation ensures that the product is adjusted to the degree of hardness of the working material.

Some models have a re-strike mechanism: if during the first press the staple does not completely enter the surface of the material, then it achieves the end with a second shock pulse.

The following can be inserted into a mechanical tool magazine: consumables:

U-shaped or U-shaped brackets different sizes(thickness, length, width of legs);

pins;
nails Not large sizes.

Staples can be inserted into only one type or both, and there are also modifications designed in addition for nails with pins. The latter option is more versatile and is more popular among builders. But in mechanical devices the clip for the bracket is small, so fasteners are inserted only in small quantities. When performing work operations with hard materials requires quite a lot of physical effort.

Advantages and disadvantages

Mechanical devices are simple in terms of Maintenance : It is enough to periodically lubricate the working units. The regularity of applying the compositions is determined by the intensity of use and is given in the instructions. The simplest types of lubricants are suitable.

If we consider mechanical professional stapler, then it is quite expensive, but it has high power. This allows you to work with hard materials. Such models can withstand heavy operating loads. They are practically comparable to electric and pneumatic analogues in terms of their performance characteristics.

The main advantages of mechanical staplers are their low cost, if we consider options for domestic use, as well as autonomy. The tool does not have any batteries, hoses, or power cords.

Among the three types of staplers, mechanical models are the lightest and most compact. This makes it possible to carry out work in hard to reach places, as well as in awkward positions.

Electric tool

An electric stapler is more functional than its mechanical counterpart. The useful work is done by the electric motor. The fastener flies out when the trigger is pulled. The impact force of the mechanism is also determined by the power of the installed spring, but it is stronger than that of mechanical staple shooters, so larger consumables can be used here. Working with a power tool does not require any special effort.

The product range is represented by network and battery models.

Network models

For operation of network staplers, a 220 V supply network is required. In this case, the presence of a cord limits freedom of movement, you often have to use an extension cord. There is also a possibility that if the tool and power cord are damaged, you may receive electric shock. To protect against this, the electric stapler is equipped with a plastic case with rubberized pads on the handle, and its cord is made with two layers of insulation.

Compared to manual staple guns, the weight of electric devices is significantly higher. Thus, the weight of individual modifications reaches 2 kg.

Mid-range electric modifications typically fire 20 to 30 shots per minute. This parameter is important for labor productivity.

Battery-powered staplers

The cordless tool does not have these disadvantages. It is characterized by mobility, but weighs more than network models. Modifications with batteries can use fasteners up to 30 mm long. With one battery charge you can fire about 1000 shots (the rate of fire reaches 30). The weight of the devices is in the range of 1.7-2.5 kg.

Electric staplers for furniture and household use are more expensive than mechanical staplers, and battery-powered models are even more expensive. Battery staplers will cost much less if you purchase them without a battery and a charging unit.

Additional functions

The electric professional stapler has a number of additional accessories and functions:

a device for removing stuck fasteners;
ability to regulate impact force;
a protective mechanism that prevents the possibility of an involuntary shot;
the ability to strike with two staples and control the pulse frequency;
the shot is fired by pressing the tip of the tool onto the material.

Household models are only partially equipped with these functionalities.

Pneumatic devices

A pneumatic construction staple gun is the most powerful tool of the previously discussed devices. At the same time, the pneumatic stapler is simple. It is characterized by durability and is not difficult to operate. Instrument maintenance consists of periodic cleaning.

Device

Nails with staples fly out under the force compressed air energy. There are no springs in this mechanism. Its main working unit is a pneumatic cylinder, into which compressed air is supplied using a pneumatic distributor.

To operate a pneumatic staple hammer, you need a compressor or a cylinder containing compressed air.

Industrial equipment also requires power supply. Energy can be taken from the network or from a battery - the latter option is more autonomous.

Operating pressure– this is the most important parameter. It differs for different models. Average value this parameter ranges from 4 to 8 bar. Also, a pneumatic nailing gun is characterized by the amount of air required to fire a single shot.

In practice, the following types of pneumatic products are used:

stationary, where air enters when the pedal is pressed;
manual, where the flow of compressed gas is ensured by pressing the trigger.

Advantages and disadvantages

The main advantage of pneumatic tools, besides power, is its high performance : rate of fire is 1 shot per second. In this parameter, the products are superior to electrical and mechanical ones. In terms of weight, manual pneumatic devices correspond to manual models(its size is about 1 kg). The tool has a compact size.

The pneumatic tool can work with staples up to 50 mm in size. It is also designed for finishing nails and medium-sized fasteners, and the magazine can hold a large number of them.

A pin-tapering gun powered by compressed air energy, in addition to the functionality of electric models, also has its own characteristics:

blocking system;
device against jamming of fasteners;
the ability to carry out multiple strikes;
two starting methods (separate and contact);
shock adjustment.

The hose brings some inconvenience during work high pressure from a compressor or compressed air cylinder: movements are limited. Also, the compressor unit can noisy work, which affects general condition users.

The weak point of products operating on compressed air is O-rings. They wear out quite quickly, but replacing them is not difficult, and they are also inexpensive.

Pneumatic tools are used mainly in production and small workshops. It belongs to professional equipment.

Criteria for choosing a stapler for home and professional activities

Staplers for construction work They are conventionally divided into household, semi-professional and professional models. The difference between them lies in the greatly expanded functionality of the latter: the presence of various settings, several operating modes, as well as a long service life. This leads to the fact that the price of a professional tool significantly exceeds the cost of a household one. Professional devices can be used in professional activities, for home use- this is an expensive pleasure.

Home products often made of plastic. Their workforce is small. Professional devices are the most reliable. They are made of metal (regular or of stainless steel). They only have plastic handle pads that soften recoil.

Semi-professional equipment occupies an intermediate place in terms of quality and price. Products from this category are a good choice for household use. They have wide functionality that allows you to perform an expanded range of work at home.

General criteria for choosing construction staplers are:

possibility of disassembling the tool body;
dimensions of the fasteners used;
the location of the handle (the closer it is to the body, the more convenient it is to work);
the ability to regulate the force of the punching mechanism;
presence of double impact (important when working with hard materials).

Each stapler model is designed only for a certain type and size of fasteners: nails, studs or staples. This factor must be taken into account, as it shows the scope of application of the tool.

It is better to choose modifications so that they are suitable for fastening materials of different thicknesses: for lining, film, insulation, plywood and others.

Mechanical staplers are the most affordable option to use at home. Models equipped with a coil spring are the cheapest. Mechanical capabilities are sufficient for many operations. It is recommended that a mechanical type furniture stapler (or any type in general) have collapsible design. This will make maintenance and repairs easier.

If you need to perform relatively large amounts of work at home, it is recommended to use a more expensive and functional power tool - this will save time and effort. When autonomy is important, battery or mechanical models are suitable. As for battery-powered models, you should prefer modifications with high-capacity batteries that can charge quickly. It’s good when the package contains spare batteries.

Before you buy a stapler, you must also consider the availability of functions that ensure safe operation of the tool.

Review of popular models in different categories

Construction staplers are produced by well-known manufacturers of construction tools, for example:

EINHELL;
SPARKY;
Bosch;
METABO;
STURM;
NOVUS;
Intertool.

The ratings of the products of these brands have been very high for many years. Among the manufacturing countries, the highest quality staple guns are produced in Germany and Japan. When asked “advise which stapler to choose for household or professional use", you can confidently point to the products of the listed companies in the corresponding category.

According to customer reviews, the model ranks first in popularity in 2017 among budget options . Like all products from STURM, the tool is distinguished by high-quality assembly and components. The driving force is energy electric current. The model is connected to a stationary network with a voltage of 220 V. This power tool works with staples and nails, but of small sizes (6-10 mm and 8-14 mm, respectively). For domestic use, STURM ET4516 is a good option.

low price (about 1200 rubles);
possibility of application different types fastening elements;
build quality;
ease of maintenance and operation;
sufficient rate of fire (20 shots per minute).

Only small staples with nails can be used, which significantly limits the scope of use of the tool;
some inconveniences are associated with the presence of a power cord, which limits freedom of action;
to work away from the mains, you need an extension cord;
greater weight compared to similar devices (1.25 kg).

Bosch PTK 3.6 Li (0603968120)

Bosch PTK 3.6 Li (0603968120) - this staple gun is made in Germany and belongs to battery models. High quality ensures the reliability and durability of the tool. The model can only work with staples measuring 11.4x(4-10) mm. The Bosch PTK 3.6 Li stapler (0603968120) has a high rate of fire, which allows its use to increase labor efficiency. The modification is equipped with a 3.6 V battery with a capacity of 1.3 Ah. The tool's security level is superior to its network counterparts.

high rate of fire (30 rounds per minute);
quality and reliability (2 year warranty);
charger included;
light weight (0.8 kg);
availability of a store (for 100 pieces of staples);
can work in wet conditions, as well as in explosive conditions;
sufficiently capacious battery.

Only small staples can be used;
you need to monitor the battery charging, recharging it in a timely manner;
the price exceeds the cost of electrical network analogues (about 4,000 rubles).

Among mechanical models Intertool RT-0104 is popular among consumers. The stapler with a cassette magazine has a reliable, simple design. It is universal, allowing the use of studs (pins), nails, staples (maximum width 11.3 mm) with lengths respectively: 8-16mm, 8-16 mm, 6-14 mm. It can be used during household construction and repair work, as well as when assembling furniture. The metal case contributes to the strength and durability of the mechanism. The presence of rubber pads on the handle increases the ease of use of Intertool RT-0104.

small weight (0.88 kg);
impact force adjustment function;
ease of operation and maintenance;
simple design;
possibility of using different fasteners;
low price (about 750 rubles).

small sizes of fasteners, which limits the area of use of the device;
working with a stapler requires a lot of time and effort compared to using electric and pneumatic models.

In order for a purchased stapler, for example, for furniture, to last a long time, it is necessary to use branded consumables. It is necessary to regularly clean the device in use from contaminants, and lubricate mechanical models. When choosing products, you mainly need to take into account the area of their future application. Mechanical or electrical modifications of staple guns are suitable for everyday use. Professional devices can be purchased when large volumes of work have to be performed, especially on hard material.