Do-it-yourself lugs from car wheels. Making lugs for a walk-behind tractor with your own hands. Purpose and types of lugs

Using a walk-behind tractor, you can do a lot of different work if, in addition to the unit, you have the appropriate attachments. the main task of any walk-behind tractor is soil cultivation: plowing, hilling, possibly planting and digging up potatoes with a certain canopy. Plowing requires grousers for the cultivator. These are reliable assistants for every unit owner, and you can make lugs for a walk-behind tractor with your own hands within a few hours. Grousers are a fairly common attachment that allows you to increase the weight of the equipment and provide better traction between the walk-behind tractor and the soil.

general information

Making your own hooks

For "Neva"

Each brand of walk-behind tractor has attachment options that are more suitable to its design than others. It is better, of course, to purchase a universal walk-behind tractor, for which almost all awnings are suitable. Wheels with lugs Ø 340×110 are produced for the Neva.

In design, these lugs are slightly larger than the homemade ones we described. Instructions must be followed listed above, but choose other rim sizes. The height of the wheel for the Neva hitch should be 340 mm, the width homemade device- 110 mm.

For "Centaur"

The lugs for walk-behind tractors of this brand differ only in size. The dimensions that needed to be taken into account when converting old wheels into lugs for the Neva were described above. The same scheme is used to make wheels with hooks large sizes. The wheel height is selected 450 mm. The wheel width should be 110 mm, as for the Neva. Such hooks are suitable for the Centaur 2060 and 2090 walk-behind tractor and units with similar parameters. The factory version will cost about $30.

For "Bison"

The walk-behind tractor of this brand is a heavy professional equipment, and can be equipped with the best available attachments. In order for the “Bison” to penetrate the ground perfectly, it needs lugs. The standard devices that fit it have a 200 mm tire and a height of 700 mm. Wheels of this width are only suitable for heavy walk-behind tractors and, in addition to the Zubr JRQ78 and 79, are also suitable for the Centaur 1070D, Aurora 101 and Aurora 81, Zirka LX1080D and 1090. In the factory version, the distance between the hooks is 14.5 cm. The wheel hub has a diameter of 60 mm. They are attached to the walk-behind tractor using an additional hub.

Description and sizes of hooks

Heavy walk-behind tractors are most suitable for working on heavy soils and, accordingly, hooks with a larger width and height are more suitable for coupling the unit with virgin soil or very neglected soil. For highly complex work, weights are attached to the wheels.

The dimensions of the hooks vary between 310-700mm in height and 100-200mm in width. The Salyut walk-behind tractor is suitable for lugs of 500×100 mm and 500×200 mm. The latter are functional together with the plow. You can buy the same size with a sand-filled weighting agent so that the mounted plow plows the soil deeper. If you have 500x200 hooks, you can make the weight yourself. Wheels with hooks measuring 700x130 mm are put on the walk-behind tractor to work with hillers, flat cutters and potato diggers.

Lugs for "Zubr"

In addition to those described above, the heavy Zubr JRQ78 and 79 walk-behind tractor can easily accommodate 700×100 mm hooks. Their width is smaller, and, in addition to heavy ones, they can be used with medium-heavy walk-behind tractors.

The hooks for the Zubr will fit the Neva. Hooks of this size are in high demand, precisely thanks to better compatibility. Wheels 700×200 can only be put on heavy units, and they are intended for processing virgin soil. Wheels 700×100 are suitable for the average needs of a farmer; they can be safely stored and mounted on another walk-behind tractor when the existing one becomes outdated, even one with weaker power. 700x100 lugs will cost about $70.

The simplest holds

To make it you need the following:

Steel sheet 4-5mm thick for wheel rims.
Steel sheet 6-8mm thick for hooks.
Welding machine.
Bulgarian.
Drilling machine or powerful drill.

Two identical disks are cut from a thinner sheet. A hole is made in the center for the hub and mounting on the wheel studs. Saw-tooth projections 10 cm deep are cut along the outer edge. Triangular hooks with cut corners are cut out of a thick sheet. They are welded strictly perpendicular to the sawtooth cuts.

Despite the unsightliness, homemade holds, made in this way, have a serious advantage - they are heavy enough to provide strong adhesion even to a muddy or loose surface. Moving on dirt roads is out of the question; such wheels are intended only for work in the field.

Another economical option - made from steel circle Ø15mm. The steering wheel from the valve on the main gas pipeline can be used if a pair is found. The hooks are welded to the outer rim, and the hub is attached to the center.

For the next design you will need car wheels. This manufacturing option for homemade walk-behind tractor is optimal. When designing, it is provided standard wheel hubs from a car, and the entire set of four is purchased rims. One pair is equipped with tires, and the second is needed for heavy soil.

A steel corner of 50-60 mm is taken and cut into pieces that are slightly wider than the disks. In the middle of one side, a triangular sector of 60° is cut out with a grinder.

The corner is heated with a gas burner and bent along the cutout. The docking area can be tightened a little by welding to provide additional rigidity. The resulting blanks are welded to the outer side of the disk, and an equal distance is maintained.

The assembly is repeated on the second disk, do not forget about the same distance between the corners. Now you can quickly replace rubber wheels with steel hooks, and there will be no problems with the seat, because the disks are the same.

The design of the wheel rims can be simplified. To do this, the horizontal part (rim) is cut off and steel plates are welded on. This option Suitable for frequent wheel changes on the same type of hub. Discs are selected accordingly.

Homemade hooks of complex design

Easy-to-manufacture lugs have characteristics that are far from perfect. Let's imagine the design which is not inferior in quality to factory products.

We will need:

Steel sheet 4-5 mm for the central disk.
Steel strip 50 mm wide and 4-5 mm thick for the external supporting surface. There will be six such hoops. The outer rings make the wheel stronger and heavier.
Steel plate for hooks 8-10mm thick.
Arc welder, drill or drilling machine, Bulgarian.

Connections are made by electric welding, since gas-burner metal of such thickness will not heat up.

Since the diameter and width of the hooks are larger seat for standard wheels, the axles are lengthened.

It is possible to adjust the track, which depends on the width of the rows on the field. By moving the wheels with hooks, you can set any width and position of the attachment. Each wheel weighs at least 10 kg, which means it provides strong grip on the ground.

Such wheels are not devices for loosening or plowing, although some tillage is involved. They cannot be used as a loosening cutter, since an independent support point is needed. If weighting the hooks is not required, the design can be made lighter and more openwork. These wheels perform well on “light”, pre-loosened soils. Discs of small diameter, the rim rests on openwork design with spokes made of profiled steel sheet. For hooks, the steel thickness should be no more than 8 mm. Each wheel is no heavier than 7 kg.

Combined design

If the equipment is homemade and the soil is not too difficult, the wheels should be appropriate. You can make hooks using tractor protectors.

We take halves of wheel rims from a Zhiguli car. . Choose tires with good tread from the tractor. We cut off the sides, we get a rubber closed ring with a good protector. We open the halves of the wheel rims and, after laying the tires, twist them firmly. With such lugs, you will be able to move along a compacted dirt road without fear of loosening it. On the soft soil of a plowed field, the wheels will not fail, but the traction force will be less than in the case of the metal version.

If it is necessary not only for the wheels to be grippy, but also to additionally loosen the soil in the rut, knife-type hooks are made. You can create a homemade rim to attach them or weld them to rims. The only drawback of the blade design is that it does not allow you to move the walk-behind tractor in the usual way.

When loosening in spring together with traditional attachments, the width of the soil processed per pass will double, which will save a lot of time.

In modern life, various devices are used that are designed to significantly reduce physical stress when performing certain work. For agriculture and gardening, appropriate special equipment is used, which increases productivity. On practice, Special attention focused on small and multifunctional devices.

One of these devices is a walk-behind tractor. Of course, the device itself does not have a certain value without additional attachments. However, due to the high cost, lugs for the walk-behind tractor and other devices can be made independently. In this case, it is necessary to consider exactly how homemade lugs are made for a device such as the Mole walk-behind tractor or other models.

Save time and effort with walk-behind tractor lugs

How to choose lugs for a walk-behind tractor

Before considering how to make lugs for a walk-behind tractor with your own hands from car wheels, you need to consider the procedure for choosing these devices, as well as the main purpose. Why do you need appropriate lugs for a walk-behind tractor? These devices allow you to cultivate arable land before planting, carry out hilling, and also plow the soil after harvesting. When selecting these devices, the following parameters should be taken into account:

First of all, the choice of lugs for a particular walk-behind tractor should be made based on the available budget.
It is necessary to take into account the dimensions of the motor cultivator, as well as attachments (length, height and width, as well as diameter).
Devices should be selected based on the purpose and functions of the corresponding walk-behind tractor and structural elements.
It is also important to take into account the type of soil that is subjected to appropriate processing using a cultivator.
Here, the availability of technical equipment options (mounted, rigid hitch devices or auxiliary devices) is taken into account.
The area should also be taken into account land plot, and also the power of the cultivator used for processing.
Separately, the cost is taken into account, as well as the manufacturer and compatibility of technical equipment.

In this video we will look at lugs for walk-behind tractors:

Taking into account all these parameters, you can make a rational choice suitable option to buy or try self-production devices from disks, using certain diagrams and drawings that are freely available on the Internet for downloading. Additionally, if necessary, all developments in the design can be done independently, if you have certain skills, knowledge and some desire.

Important. When purchasing attachments, it is recommended to take into account that mainly the lineup is manufactured for each motor cultivator in a separate order.

The most effective

When choosing appropriate devices, most often, the models that are most effective are taken into account. In practice, this is only true for specific types of attachments. Let's take a closer look at what types of appropriate equipment you should choose for the full cultivation of arable land:

here, most often, multi-component milling devices are used, which allow processing the soil in different directions;
you can give preference to a plow with a harrow, since this equipment can simultaneously plow, loosen and cultivate the soil;
additionally should be highlighted homemade devices, since they allow you to apply everything you need in one mechanism;
Collapsible multifunctional component cutters and plows with harrows are also in demand.

Each individual case has its own nuances in the appropriate selection of structural elements, but an integral part of any type are special weighting agents that serve to weight the structure when immersed in the ground. This equipment allows you to evenly plow the soil to the same depth. This arrangement is especially necessary for tall cultivators, where the hitch is located significantly above the working plane.

How to make your lugs heavier

As mentioned earlier, for uniform tillage of the soil with special attachments, appropriate weighting agents are used, which allows the mechanism used to remain on the ground during movement. required depth. In this case, it is necessary to consider in more detail how to make the canopies used heavier, namely:

for purchased equipment, special auxiliary weights can be used, which are hung together;
if necessary, you can use hanging any heavy object for uniform plowing;
in this case, it is possible to independently create a fairly heavy device that will loosen the soil evenly;
Often, on manufactured versions, a corresponding center of gravity is specially provided, which is achieved by the presence of a certain design;
weighting can be an additional adjustable insert that is present on the attachment.

There are quite a lot of options for increasing the mass of this device; here you just need to rationally use such weighting so that during operation the device does not fall deep enough into the ground. Otherwise, damage to the coupling mechanism or deformation of the tillage mechanism itself may occur.

Important. When working with such equipment, weather conditions should be taken into account, as well as the humidity and softness of the soil surface being treated.
Do-it-yourself lug lugs for a walk-behind tractor
In modern practice, there is no need to purchase such versions of structural elements, since it is possible to do everything necessary yourself. As a rule, this will require certain materials, as well as some auxiliary tools for the manufacture of the corresponding mechanisms. In this case, the procedure for making special homemade lugs is as follows:
First of all, you will need to find the appropriate execution scheme, or make it yourself, taking into account affordable option assemblies.
The next step will be to prepare everything necessary to install attachments on the motor cultivator.
Next, you need to correctly calculate all the dimensions of the home-made lug for the cultivator to be completed.
Additionally, it is necessary to decide on the option of coupling the homemade device and mechanized equipment.

Create your own lugs
Subsequently, according to the prepared scheme, the necessary product for plowing the soil is manufactured.
Here, a holding frame is produced separately, and in addition the device itself for cultivating the soil on a plot of land.
Subsequently, the manufacture of the appropriate mechanism for coupling with the mount present on the walk-behind tractor is carried out.
Next, a complete assembly of the entire mechanism is carried out from previously made individual structural elements and devices.
Separately, weighting is arranged here, which can be done with the addition of weights determined by weight.
Also, if necessary, you can use a specialized frame that will have the required weight and a shiftable center of gravity.
After the structure is assembled, it will need to carry out its initial coupling with the mechanized cultivator.
Additionally, a test run of the manufactured equipment is carried out, and, if necessary, adjustments are made.

When producing such technical equipment, the main thing in the work is the search or development of a diagram of a future version of the lug. Having the necessary drawing at your disposal will significantly reduce time costs, since the diagram contains visual drawing device, and in addition all the necessary dimensions are indicated.
It should be understood that in each individual case the dimensions of the structure are calculated based on the power of the installation, its size, and also the clutch option. In other words, it is not recommended to install a large lug on a walk-behind tractor with low weight and a weak motor, since such equipment can quickly damage the main mechanism due to excessive load.
Important. In practice, for self-execution For such equipment, any strong metal object can be used for tillage, including car wheels, whose service life has already expired.

From car rims
Currently, the arrangement of attachments from these elements is quite widespread. This popularity is due to the following characteristic points:
All car wheels have the necessary structural rigidity, as well as a suitable size and weight.
Such devices are easy to find (often old devices are stored in the garages of almost all car owners).
These variants of structural elements are quite easy to process, since they were initially made with an eye to possible repairs.
The mechanisms already have the cuts and other openings necessary for fastening on their central plane.
This type of device has a long service life when correct processing surfaces.

There are only advantages to using rims from car wheels, since they are the easiest to use to make milling lugs for attachments, which will subsequently be mounted on a walk-behind tractor. Here, when working, you only need to make the necessary cuts with a grinder, and then hang the devices on a special frame, which will be coupled with a walk-behind tractor. The frame itself is made quite heavy to weigh down the structure.
Important. After completing the work of making cutters from discs, all that remains is to sharpen them correctly, so that later when processing arable land, additional weighting is not required.

The lugs for the walk-behind tractor are useful devices, allowing you to clear the area for sowing from weeds and, at the same time, increase the stability of the agricultural machine on loose soil. Today these simple products have earned great popularity not only among owners of large farms, but also among summer residents who have small plots of land at their disposal.

Why are lugs needed for a walk-behind tractor?

Grousers for a walk-behind tractor are one of the most multifunctional types of devices for a utility unit. When working in tandem with an agricultural machine, the products perform a number of the following tasks:

They increase the weight of the walk-behind tractor, allowing for more efficient use of various attachments;
Additionally, they cultivate the soil, eradicating wild bushes;
Improves the traction of the walk-behind tractor with loose soil when moving up.

The versatility of lugs makes them an integral attribute in both large and small farms. Their installation and use will not require special skills, so even a beginner can effectively use lugs for walk-behind tractors.

Not only the effectiveness of their use, but also the ease of movement of the walk-behind tractor depends on how correctly the lugs are selected. When purchasing devices, you should pay attention to the following factors:

Dimensions of lugs - suitable dimensions of products directly depend on the class of agricultural machine. For heavy walk-behind tractors, choose products with a diameter of about 70 cm. Medium and light units can be equipped with lugs with a diameter of about 25–40 cm;
The type of soil that needs to be cultivated - the most universal are considered to be lugs to which arrow-shaped spikes are welded. Their adhesive part is shaped like corners, thanks to which they show excellent adhesion even with very loose soil;
Possibility of installing weighting agents - for operation on loose soil, some manufacturers of lugs provide the possibility of installing additional weighting agents, which make the use of products more efficient, especially when working with light walk-behind tractors. As a rule, weights take the form of durable metal containers that can be filled with stones, sand or any other available material, and then installed on lugs.

When purchasing lugs, be sure to consider each of these factors. This will make it much easier for you to choose the most effective devices for installation on a walk-behind tractor.

Taking into account the high cost of some models of lugs, many owners of walk-behind tractors prefer to make accessories for agricultural machines with their own hands. There is nothing strange in this, because homemade designs in terms of quality, efficiency and durability, they are practically no different from the lugs available for sale on store shelves.

Before making lugs for the walk-behind tractor with your own hands, we advise you to carefully study the drawings. They will give an idea of how to arrange and fasten parts in a structure.

The most in a simple way will be the production of lugs from car rims from cars of the domestic VAZ brand. The order of work, in this case, will be as follows:

First you need to weld one metal plate to the outer surface of the Zhiguli disks;
Next, start making the teeth. To do this, take steel of the required thickness and cut blanks of suitable sizes. The length of the teeth varies depending on the class of the walk-behind tractor - for heavy units, teeth about 15 cm long are suitable, for medium ones - 10, and for light ones - about 5 cm;
Weld the manufactured teeth around the circumference of the rim, keeping a distance of 15 cm between them;
The video will tell you more about the manufacture of lugs for walk-behind tractors.

The simplest iron wheels for a walk-behind tractor made in this way will help you quickly remove large weeds and make your walk-behind tractor much more passable in loose and wet soil conditions.

Making lugs from a gas cylinder

Simple metal wheels for a walk-behind tractor, you can do it another way. An empty gas cylinder is suitable for this. In this case, you will need:

Make sure that there is no gas in the cylinder;
Place the cylinder motionlessly on the floor or on stands;
Cut 2 identical disks from it, about 30 cm high and about 6–10 cm thick - they will play the role of rims;
Weld one metal plate to the disks;
Weld 6 teeth, 15 cm long, to each of the plates. For use on walk-behind tractors light class You need to weld teeth 5–10 cm long to the plate.

For work, we recommend using exclusively cast iron cylinders. Cast iron is much stronger and heavier than steel, so lugs made from this material can last quite a long time. a large number of time.

Production of lugs with a more complex design

In addition to methods that allow you to make the simplest lugs, there are also ways to make more complex structures. To work on the manufacture of the latter you need to prepare:

Steel sheet, thickness from 3 to 5 mm - you need to make a central disk from it;
A steel strip, 5 mm thick and 50 mm wide - it will be needed to make the outer hoop. You will need 6 hoops - they will weigh the wheel down and make it more durable;
Another steel plate, 8 to 10 mm thick - you need to make a hook from it;
Bulgarian;
Drilling machine or drill;
Welding machine.

All parts should be connected to each other using arc welding, since a gas burner will not be able to heat metal of this thickness. The manufacturing algorithm is as follows:

First, lengthen the axles of the walk-behind tractor - this is required due to the fact that the width and diameter of the lugs are larger than the mounting location of the standard wheels;
Be sure to provide the ability to adjust the position of the track, since in the future you will cultivate the garden with rows of different widths. When moving the lug wheels, you will be able to adjust the position of the attachment used and the width at which the lugs will be located. Since the mass of each wheel is about 10 kg, reliable grip and high stability of the walk-behind tractor on the ground will be ensured;
Next, proceed to making the lugs themselves. To do this, make 2 spoke-shaped central disks from profiled steel sheet;
After this, weld 3 external hoops and hooks to the end parts of the structures;
Weld steel plates to the hoops. They should be placed diagonally on the hoops in the form of a snake;
Sharpen each plate for better traction.

The lugs made will ensure maximum adhesion to the ground and will help you easily remove even the thickest weeds.

When using lugs, never forget that they are intended only for work in the garden. Do not use devices to move the walk-behind tractor on concrete or asphalt, as the teeth of the product will bend and quickly become unusable.

Both the simplest and more complex designs, are suitable for use on walk-behind tractors Salyut, Agat, as well as Neva MB-1 and MB-2.

Every owner of a walk-behind tractor tries to do everything possible to ensure that his tool is as functional as possible. You can make lugs for a walk-behind tractor with your own hands from car wheels or buy them at a specialty store.

Drawings on how to make lugs for a walk-behind tractor with your own hands

The grouser belongs to the attachments and is widely used in agriculture. It is necessary to take into account the design of the lug, since they are made universal, and some are made for individual models of walk-behind tractors. Any owner of a walk-behind tractor can make his own lug from unnecessary car wheels. Naturally, this activity will take time, but you can save some money.

Drawings and diagrams of lugs for a walk-behind tractor

DIY lug drawing

Do-it-yourself attachments for a walk-behind tractor made from car wheels

Before you start working on the manufacture of a lug, you need to acquire drawings, the orientation of which will be aimed at the work process. The simplest and most common manufacturing method is the use of car wheels.

Drawing on how to make a lug

Step-by-step instructions for making lugs from discs:

Step 1. By using welding machine A metal strip is attached to the disks, which will later serve as a fastener for the lug plates.

Photo of disc lugs

Step 2. Manufacturing of teeth based on steel plates. The plate thickness must be sufficiently thick if the attachment is intended for ground work. The length of the teeth must be selected based on the model of the walk-behind tractor.

Photo of how to make attachments from car tires

Step 3. The teeth are attached in a circle, the distance between them should be 16 cm, tolerance in different directions should not exceed two centimeters.

Photo of wheel lugs

When putting your lug into operation, it is worth remembering its intended purpose, that is, its contact exclusively with the ground. It is strictly forbidden to operate the equipment on hard surfaces such as stone or asphalt.

Photo of a metal sheet lug

DIY lugs for a walk-behind tractor made from car wheels Even a novice farmer or gardener can do it. Find detailed drawings and try to make attachments from scrap materials yourself. Quality equipment– the first step to successful farming from scratch.

A person living in an agricultural area or simply owning a dacha should keep a device such as a walk-behind tractor on his farm. Such special equipment will greatly facilitate the process of plowing and hilling the land, and can also be useful when planting and digging up potatoes and other agricultural work. But for any type of work you need your own trailer awnings. You can buy equipment at mall, or you can make lugs for the walk-behind tractor with your own hands.

The lugs are designed to make plowing easier. They look like large, steel wheels with angular spikes, with which they firmly cling to the soil. To make lugs for a walk-behind tractor with my own hands, required suitable material and devices. A couple of disks, a grinder and an electric welding machine are not as difficult to find as paying a decent amount for store-bought accessories.

Lugs for walk-behind tractors made from car wheels

The simplest answer to the question of how to make lugs for a walk-behind tractor is to use old car wheels. In addition, you can use not only car wheels, but also any others: tractor, motorcycle, or from under an old walk-behind tractor. Before starting work, you must carefully study the diagrams and drawings. Examples ready-made solutions for the production of homemade lugs for a walk-behind tractor from car wheels are shown below.

To make good soil hooks, you must follow these instructions:

Attach iron strips to the disks, which will be used to strengthen the spikes. When making a lug, it is recommended to screw the plates under the cleats to the disk with bolts.
Make spikes from 2 iron plates. The spikes should be similar to 100-120 degree angles. Since they are designed to work with soil, the width must be made quite large.

The length of the teeth can vary significantly, it all depends on the model or modification of the walk-behind tractor.

Screw the spikes onto the iron strips. The gap between each tooth should be from 14 to 18 cm.

For better work You can increase the spikes by attaching an additional tooth to all the hooks. In general, to make such equipment, it is not necessary to use disks - almost any round-shaped steel object will do for this. For example, you can cut a couple of iron rims from a gas cylinder and weld corners to them.

If you do everything according to the instructions, you will get an excellent lug for the walk-behind tractor, which will delight you with work for many years. The main thing is not to forget about correct operation. A mini tractor with such hooks must be used exclusively on the ground. This applies not only to equipment made with your own hands, but also to store-bought lugs.

If you use them on asphalt or stones, you can damage the lugs themselves, the surface and, most importantly, put yourself in danger.

Dimensions of lugs for walk-behind tractors

The heavier the equipment, the better and more practical it is. High-quality, heavy-duty equipment allows you to work even on hard ground, which a lightweight mini tractor can handle with considerable difficulty. require the same not small lugs. In general, the scale of lugs depends on the size of the walk-behind tractor. The height of the equipment can be from 310 to 700 mm, and the width from 100 to 200 mm. The dimensions of the lug must be selected based on the modification of the unit. The scope of certain models is presented below.

Neva

You need to purchase walk-behind tractors that can adapt to each attachment, or, more simply, universal ones. However, what to do when the farm already has a mini tractor from the Neva company, which is by no means considered universal. The wheels of this device for working with soil have scales from 340-360 to 90-110 mm, and on the Neva MB they are 480-500 x 190-200. When producing a homemade hitch for the Neva, you need to take into account that the height should be 340-360 mm and the width 90-110.

Firework

In this case, you can assemble the lug according to the same scheme as Neva. The sizes of Ugra MB or Salyut wheels are from 480-500 to 190-200 mm. Thus, the lug must be made 48-50 cm in length and 19-20 cm in width, the same dimensions are made on the Oka MB series.

Centaur

The wheels on the Centaur are similar to those on the Neva walk-behind tractors. Their difference is that the Centaur’s wheel length is eleven cm longer than that of the Neva. When producing a lug, it is necessary to make it 450 mm long and 110 mm wide, the same dimensions for the Zirka, Vityaz, Aurora, Bulat models. Such a hook will fit the Centaur 2060 and 2090, as well as various units with similar dimensions. In a shopping center, the cost of similar lugs is 2000-2500 rubles.

MTZ

Despite the fact that MTZ walk-behind tractors are made in Belarus, the cost of such units is quite considerable. The approximate price of a lug for MTZ is from 4000 to 5000 rubles. The fact is that the wheels of these walk-behind tractors are quite large, their size is 540-600x130-170 mm. To make a lug for a MTZ walk-behind tractor with your own hands, you need to follow the instructions described earlier and make the values corresponding to these wheels, that is, 540-600x130-170. The same dimensions are used for Agro models.

Cayman Wario

The French company Cayman produces excellent walk-behind tractors, the price of which can exceed 60-70 thousand rubles. Also, the additional equipment on them is by no means low in cost. The price of a lug for the Cayman Vario is from 5 to 7 thousand rubles. Their size is 460x160 mm, there are also extended ones 600x130 mm. The same sizes are used on the Caiman Elite, Compact, Eco, Promo, Primo, Q Junior series. You can also make a lug yourself, although a person who allows himself to buy such a walk-behind tractor will be able to purchase any equipment for it from the store.

Oka

Oka walk-behind tractors are domestically produced, a fairly common product in the region Russian Federation. Farmers and hobbyists are increasingly trying to make additional equipment specifically for such units. When making a lug on Oka, the length should be 450 and the width 130 millimeters. The manufacturing scheme is the same as for other walk-behind tractors - everything is extremely simple. In the store the price of such equipment is approximately 2500 rubles. But why spend money when you can do everything at home.

Bison

The Bison is a massive, impeccable mini tractor that can cope with numerous tasks on the farm. It comes with only the best suspended special equipment. The size of its wheels is 700x200 mm, the lug dimensions are similar. In addition, certain modifications of the bison accept lugs measuring 700x100 mm. For this reason, it is possible to make lugs of each of these sizes. However, it is recommended to produce 700x100, as this is more suitable for household needs. Dimensions 700x200 mm are mainly suitable for working in virgin soil. The cost of the Zubr lug in shopping centers ranges from 20 to 50 thousand rubles.

Cascade

Another domestic manufacturer of special equipment. Motoblocks of this company are also very famous. For this reason, it will be useful for many to find out what diameter the lug should be for such a device. Height – 460-680 mm, width – one hundred to one hundred and ninety-five millimeters.

DIY lug extensions for walk-behind tractor

Extensions serve to increase the width of the potassium, as well as the ability to freely turn the wheel relative to the axis. In order to make this kind of extension in a walk-behind tractor, you need to screw a sleeve with a slot onto the axle. An axle is inserted into the bushing and secured with a bolt. Well, the final thing is to secure the wheel with a lug on the axle. This mechanism is very simple and anyone with at least some connection to technology can make it. In a shopping center, such an extension cord costs from 800 to 1000 rubles.