Anyone who wants to make the interior of the apartment original or add a “zest” to the equipment summer cottage, this option is suitable - a table with “backlight”. The product is created using epoxy resin and two types of permanent paints. All work - from sanding to cladding - is quite accessible to a beginner in carpentry.
All work - from sanding to cladding - is quite accessible to a beginner in carpentry.
Furniture with a luminescent effect looks unusual and especially interesting.
Making a glowing table with your own hands does not require any special material or labor costs. Handle wooden table top With the help of a special resin, anyone who knows how to hold an instrument in their hands can do it.
When decorating a table, you can come up with your own design based on the quality and texture of the material.
Furniture with a luminescent effect looks unusual and especially interesting.
You are unlikely to see such products on the open market; they are usually made to order and are quite expensive, as handmade. Thick boards or ready-made ones are suitable for production. wooden table with an interesting texture. Applying epoxy resin takes half an hour. After some time, if all processing steps are followed correctly, you will receive a table with a mesmerizing glowing effect.
Making your own furniture for your garden or home is a great way to save your budget.
Deciding on design and construction
When processing, the stage of furniture construction does not matter. To create a luminous effect, use only the tabletop, although you can make furniture entirely with a luminescent surface. Designers agree that it is better to process individual panels - this way the product looks more interesting.
The luminous table can be made stationary or folding.
Making a glowing table with your own hands does not require any special material or labor costs.
Depending on the texture, you can apply some of the resin to the cracks, or cover the entire tabletop, including the edges, with a luminescent compound (with a light blue or other tint). It is necessary to choose a “variegated” option or a relatively evenly glowing one based on your taste and needs.
Designers agree that it is better to process individual panels - this way the product looks more interesting.
Necessary materials
To make a glowing table you will need the following materials:
- boards - 2 pieces (40-50 cm wide, 1-1.2 m long);
- epoxy resin;
- sticky paper;
- luminescent and transparent polyurethane paint;
- sandpaper.
It is necessary to choose a “variegated” option or a relatively evenly glowing one based on your taste and needs.
Anyone who knows how to hold a tool in their hands can treat a wooden tabletop using a special resin.
Select wood with noticeable cracks irregular shape. A board with visible areas where branches have been cut and an uneven texture is welcome. Good for cypress or oak. If the tree is not dry enough, expose it to the sun for a while.
The tree is selected with noticeable cracks of irregular shape.
You need to take enough epoxy resin to fill the cracks several times.
Making your own furniture for your garden or home is a great way to save your budget.
Required Tools
To finish the furniture you will need:
- Sander;
- jigsaw
The table is sanded both before and after the surface is coated with epoxy resin.
The table is sanded both before and after the surface is coated with epoxy resin.
Before treating the surface, the tabletop should be assembled from two prepared boards.
After some time, if all processing steps are followed correctly, you will receive a table with a mesmerizing glowing effect.
Manufacturing process: step-by-step instructions
- Before treating the surface, the tabletop should be assembled from two prepared boards. Having connected them, sand the base.
- Pour the prepared mixture of epoxy resin and fluorescent paint onto the table. The composition should fill all the cracks, so repeat the procedure 8-10 times. After this, cover the surface with adhesive paper and leave to dry until the next day.
- After removing the paper, sand the finished surface. After cleaning, coat the base with polyurethane paint.
- Walk around again grinder on a still wet surface. Remove any remaining resin. If necessary, the edges can be cleaned and the corners rounded with a jigsaw.
A table with a luminous surface can be decorated to your liking
The final stage is decoration
A table with a luminous surface can be decorated to your liking. Fat wooden plank looks great as in in simple form(even with visible “defects”), and in combination with carved legs. This can be done using a jigsaw. You can varnish them or use leftover epoxy resin, like the countertop, to give them uniform style product.
You can varnish or use leftover epoxy resin, just like the countertop, to give a unified style to the product.
The luminous table can be made stationary or folding.
After processing, you need to sand the furniture using a machine.
At night, the product will glow in heterogeneous patterns, which creates a “magical”, festive effect, which in itself is a decor.
In the dark, the product will glow in heterogeneous patterns, which creates a “magical” effect.
Depending on the texture, you can apply some of the resin to the cracks, or cover it with a luminescent compound.
If contrast is desired, the supports are coated with paint that differs in color from the main palette.
Creating a festive effect, which in itself is a decor.
Good for cypress or oak.
VIDEO: DIY glowing table
50 photo ideas: DIY glowing table
Table made of oak blocks. Moreover, the table is not simple, but glows in the dark. The procedure for making this is undoubtedly interesting product Let's take a closer look.
The mold is made from fiberboard (a round base and a side glued along the periphery); you can use any other material that is available.
A bunch of oak pieces of approximately the same thickness are being sawed. Their sizes can be arbitrary, but their shape is approximately square. 
The trimmings are laid out in the mold, first in a circle, and then evenly fill the internal space. 
After completely laying out the entire surface of the future table, all the cracks are filled with epoxy resin, but not to the full depth; about 5 mm remains unfilled. After the resin has dried, the surface is sanded one level. For grinding, a grinder with a flap grinding wheel was used. 
Then the epoxy is mixed with a phosphor (BLO-7D phosphor is better to take about 50 microns, you need 300 grams. Ordered on the Internet) (Alternatively, you can order the phosphor on AliExpress) and the cracks are filled from above. After drying, we sand again, varnish and you’re done - you can remove the tabletop from the mold. 
It turns out like this (in the light)
We all know very well that shawls, termites, bark beetles and other “lovers” of wooden food are one of the main destroyers of roofs, furniture, wooden floors, etc.
If you find the right approach to damaged material and process it a little, you can get an excellent original glowing table, which, for example, costs about $780-800 on some sites. So let's get started.
1. To make such a table, try to choose boards that are most damaged by bark beetles. But, most importantly, do not forget to treat all the material with chemical or heat treatment. Otherwise, the bugs will not stop and will continue to do their gnawing business. Fig.1
2. After this, plan the board on all sides. And then cut the pieces. Which will be equal to the length of the table. Rice. 2
3. If you want to get a wide tabletop, then here you will have to join several boards together. This procedure is performed using wood glue and tenons. The glue must be applied along the entire length of the board. Once you have done this, tighten the boards with clamps and let them dry. Rice. 3
4. All passages along which the woodworms moved must be treated by removing dust and rot (for this it is recommended to simply blow it out with compressed air). Rice. 4
5. Next, you need to sand the surface of the countertop itself to such a state that it is smooth and even.
6. The next stage is preparing the countertop for pouring with epoxy resin. Be sure to place wax paper under the bottom side of the tabletop itself, and make a special plexiglass side on the sides. This procedure is mandatory, since bugs can make through passages.
7. Next you need to prepare the resin for pouring. To do this, it is tedious to measure out a certain amount of resin and hardener. You need to add phosphor powder to the epoxy resin (it is what provides the glow in the dark). As for the amount of phosphor itself, there are no certain proportions. You have to guess, so to speak. After you have already mixed the resin and phosphor, you need to use a flash on the resin, and then in a dark room look at the density of the glow itself. If you like everything and it fits, add hardener. Rice. 5
8. Now fill all the holes with epoxy resin. Due to its viscosity, it will not spread on the table, so it is recommended to level it with a ruler immediately after pouring.
9. Even after the resin has hardened, in any case, irregularities will remain on the surface. To do this, simply sand all defects thoroughly. Initially, use coarse sandpaper, and then move on to fine grain (somewhere from 80 to 400).
10. The edge of the table is best treated manual router. Rice. 6
11. Well, the most crucial moment is finishing your table. Open the tabletop with varnish, and when it dries, sand it with fine sand. sandpaper(1200 grit). This procedure needs to be carried out a couple of times so that the table shines well.
12. Due to the fact that the wood used was damaged and rotten, so that the legs were securely fastened, we use sheet material. To do this you need with reverse side tabletops, drill special holes for the nuts, then apply glue to the plates and glue them to the tabletop. Rice. 7
13. It is best to use welded metal legs, and use bolts to secure them. Rice. 8
That's all. Your table is ready. But know that it will only glow in the evening or at night. Rice. 9
How to make a wooden table? Anyone can make such an unusual designer wooden table at home! To do this, you need cypress boards, glow powder (luminophore), wood resin, some tools and the desire to make a beautiful wooden table with your own hands.
Glowing table
Mike Warren is the originator of this idea. unusual table, which we found at dollarstorecrafts.com. He mixed glowing powder with tree resin and filled with them the voids that cypress wood is rich in. The result is a beautiful wooden table with patterns that glow in the dark. However, first they need to “charge” in the light.
Simple shape of an unusual luminous table
If you are the lucky owner necessary tools and skills, follow Mike Warren's guidance. His video instructions are at the end!
The process of making an original wooden table
Thoroughly sand the surface of the design table
Leave cracks untouched
Fill the cracks with glow powder mixed with resin
From the presented master class, you will learn how to make a luminous table yourself, which furniture stores costs a lot of money, and thanks to this information you can do it for mere pennies. Today, it is becoming increasingly fashionable to make furniture with your own hands, as well as various interior delights, that is, people are looking for uniqueness in the things that surround them, some need it for self-realization and gaining self-confidence, while others just love doing this business .
And so, to make a luminous table, you will need old boards eaten by bark beetle. It is the old and rotten ones, eaten by worms and other bugs, that are needed in order to fill these cavities with a special luminous solution. Now let's take a closer look at everything and figure out what the author needed.
Materials
- board (old and eaten by bark beetle)
- epoxy resin
- metal legs
- metal plate 2 pcs
- wood glue
- nuts
- bolts
Tools
- jigsaw
- drill
- brush
- clamp
- ruler
- screwdriver
- container for mixing components
The process of creating a glowing table.
And since it was already said above, the author took old and rotten boards eaten by pests, it is clear that he did not buy them on the construction market 😉 The master went over the boards thoroughly with a plane and coarse sandpaper. Then the author selected and sawed the boards he needed to size so that they were the same size. 
The resulting boards should then be combined into a single tabletop, this action The master does this as follows: he coats the side parts of the boards with wood glue, and then tightens them with clamps and leaves them to dry. 
Then, after the tabletop has dried and is ready, it should be blown with compressed air, namely all the cracks and wormholes, so that no dust remains in them and possible pests.
Afterwards, you should go over the surface with sandpaper; you need to do everything extremely carefully, because the board is very delicate. And so the surface of the tabletop is prepared and it’s time to prepare the luminous solution and fill the cavities of the table with it.
Preparation of the solution: for this you will need epoxy resin, hardener and phosphor powder, it will glow. Everyone chooses the proportions of the mixture themselves; you can check the glow in the following way: give a bright flash to the mixture and turn off the light to see how the solution glows. Next, the author fills the cavities, having previously placed wax paper under the tabletop, because the passages can be through. 
After completing this operation, the master left the tabletop to dry. And then I processed the edge of the table with a hand router. 
Due to the fact that the board is rather weak in terms of density and integrity, the author screws these nuts onto the back of the tabletop. 
Misses glue metal plate and glues it. 
And in this way he screws the legs to the table. Well, the table itself is ready. 
Such a table will fit into any even the most sophisticated and expensive interior, and the cost of this table itself is absolutely cheap, but in stores such tables cost about $1000, can you imagine 😉 So take it this material note, and in order not to lose touch with us and our website, join our group
