Spinner how to make handmade paper. How to make a do-it-yourself spinner: tips for making. How to make a do-it-yourself wood spinner

Despite the fact that the peak of popularity of the anti-stress toy, fashionable in 2016-2017, began to subside, many are still looking for ways to create an original little thing that will help to have fun on long trips, long lines or in heavy life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - more in our material.

What are spinners for and how do they work?

Each twist dismantles the individuality of its owner.

fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children around the globe. Its main purpose is to occupy and distract . Someone thinks that spinner useful , because thanks to him you can distract from everyday and psychological problems, relieve irritability, get rid of excitement. Others claim that thanks to the turntable you can focus on the right things, distracting from everything superfluous. Be that as it may, the glory of the toy needs no explanation, because literally everyone loves it.

There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on the stock component parts. To understand the specifics of the work when creating a do-it-yourself spinner, you need to know just a few important points.

Mandatory traditional elements spinner are:

bearing;
wings.

The most important part of a spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its soundtrack and vibrations emitted. In many homemade toys bearings are often replaced with primitive toothpick designs , which also allow the wings of the toy to spin.

Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas, show individuality.

Unusual design one of the most primitive forms of toys - round.

The so-called spinners made of plastic, metal, wood, cardboard and many other materials. Often materials are combined. IN Lately became relevant plastic or metal toys co luminous wings.

Products made of plastic, wood and copper.

The design of many do-it-yourself spinners is amazing. Many decorate their toys with interesting engravings, illustrations, badges. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.

Spinner in the shape of a Snitch.

Fabulous illustrations and details look very interesting on spinners.

Male turntable design.

Recently, glow-in-the-dark toys have become very popular.

Fidget spinners in women's design.

Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But in order to stand out from the crowd, you need to make a certain effort, for example, do it yourself original thing for yourself or your child, relative, friend (for example, as a gift). If a kid asked for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with the creation of a memorable toy.

General instructions before starting work

Before you start working on your spinner, you need to have an idea of what exactly the person wants to get as a result. So that the result does not disappoint, you need to work according to a simple scheme.

Stage number 1 - we select a model and design

Since there are countless possible models of spinners, and we are all different, and we like different things, for starters, you can choose the right model from the simple ones. This is necessary so that the process does not turn into a punishment. Or you can go the other way and choose the most original model from a special material. unusual shape. This option is suitable for those who have already tried to create things with their own hands.

Do-it-yourself hand spinner options.

Stage number 2 - draw and draw

To make it work, you should take care of the drawing on a scale of 1: 1. You can draw a future spinner model on paper, or you can search for finished drawings on the vast expanses of the Internet.

Drawings and blanks.

Stage number 3 - we prepare tools

Now that the creator has decided on the design, and schematic representation ready, you can start preparing all the necessary materials.

The first step is to purchase (or remove from old technology) bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it is in the toy. Why clean the bearing from grease? It makes the rotation slower, besides, it stains hands, clothes and furniture.

In addition to the prefabricated parts of the spinner, you will also need the following tools:

Construction marker (pen, pencil, regular felt-tip pen);
Scissors;
Stationery knife;
Elements decorative finishes(optional);
Glue;
Special tools for creating the wings we need (tools for working with wood or metal).

Preparatory stage.

Stage number 4 - create a spinner

When the preparation is over, you can safely start making a toy with your own hands. Next, consider several popular options for creating spinners from various materials in several ways.

Varieties of twisters for hands created from improvised means.

Paper and cardboard spinner without bearing

The most popular option for those who are in no hurry to run after the bearing and cut squiggles out of metal or wood is to make the first simple spinner out of cardboard and paper. Doing it yourself is really easy, and if you show a little more imagination, then a simple cardboard box can turn into an original canvas for your favorite icons or drawings.

Tools for work:

ruler;
compass;
pencil;
pen;
scissors;
stationery knife;
cardboard;
glue;
toothpick;
nut - 2 pcs.

You can watch the video step by step:

With plastic lids

Another simple way to create a do-it-yourself spinner, which will take a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here is a little step by step guide.

Tools for work:

caps - 4-6 pcs.;
plasticine (you can kinetic sand);
glue gun;
glue stick;
lighter;
awl;
stationery knife;
toothpick;
scissors.

Progress:

Fill three covers (or more if the spinner has more wings) almost to the top with plasticine. We fix it with a layer of glue from the gun, which should fill the lids to the top.
The main cap remains without filler. In it, we make a hole with an awl in the very center. We glue plasticine covers on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
Take a stick of glue and cut off two equal parts - about 1 cm each.
We break the toothpick in the center. We insert it into the central cover and attach pieces of a silicone rod to the ends so that it is convenient to hold the piece of wood.
Do-it-yourself spinner is ready!

Wooden with bearing

Wooden spinner - the most pleasant and affordable option, which you can create with your own hands. The real lesson labor for adults and children!

Tools for work:

Glue gun;
Bearing 2 mm;
Plywood sheet, thickness 5mm;
Several coins;
Drill;
Jigsaw manual;
Clamp;
Scissors;
Sandpaper;
Pencil or building marker;
Ready-made spinner template.

Progress:

Print out the diagram and cut it out. We fix on plywood sheet and circle. It is necessary to mark the places in each of the circles where there will be holes.
We drill additional holes on the sides of the circles with the door, allowing you to cut out a beautiful circle figure from the inside of the wing.
The future spinner needs to be cut out of plywood with a jigsaw. Then carefully process the edges and surface with sandpaper to a smooth surface.
The bearing must be inserted into the hole prepared for it in the center. In case of difficulty, you can use a hammer and drive a metal element into a wooden one.
The wings of the "twist" need to be weighted - for this you will need coins. You can glue the weights for each hole in the following order: a five-ruble coin, then two, and again five, as shown in the video.
You can cover it with solid color paint, or you can decorate it in another interesting and original way - there is room for imagination, which is so nice to realize with your own hands.

Video tutorials on creating spinners

To get comfortable with creating a do-it-yourself spinner, you can check out some video tutorials on this topic. The conditions of creation can be very different, as well as materials and styles, but a home spinner can turn out to be no worse than a factory one.

Here is another way to create paper spinners, this time in the shape of a shuriken :

Article. And now we will tell you how easy it is to make a do-it-yourself spinner from cardboard or paper.

How to make a do-it-yourself spinner out of paper (cardboard)

Today on sale in markets, shops and shopping malls you can see a lot of trendy spinning toys - spinners.

They have long become interesting not only for children, but also for adults. The choice is huge: large and small, with and without a pattern, plastic and chrome.

Fortunately, each of us can not only buy a spinner, but also make it with our own hands from available materials: paper, cardboard, plastic covers, plywood. To begin with, I recommend that you read the article about the benefits and dangers of spinners.

In this article, you will learn how to make a cardboard spinner.

Advantages of the method:

Cardboard spinner is easy to make. The process takes about 15-20 minutes. Even a child can handle this task.
Most likely, you do not need to go to the store, the materials will be immediately found in the house.
The author's approach and scope for creativity. Cardboard can be easily painted in any color, add a pattern, sparkles, decorative elements and so on.

Flaws:

The disadvantage of a cardboard spinner is its fragility, and it only spins for a couple of seconds. But you can immediately make a few pieces in reserve.

The process of making a cardboard spinner

Step 1.

We select the necessary materials:

cardboard sheet,
cover from plastic bottle,
scissors,
ballpoint pen or fine marker
glue,
pen rod (preferably large diameter, for example, from a gel pen),
3 medium sized coins
1 small coin
gouache,
thick knitting needle or awl.

Step 2

We make a blank for the spinner. It can be downloaded from the Internet, printed and transferred to cardboard. You can download templates for the spinner.

Or use a plastic bottle cap - circle it 4 times to get desired shape. Next, cut out the blank from the cardboard. In the same way, we prepare the second blank (copy).

Step 3

We circle a small coin on cardboard to make 4 small circles. We cut them out.

Step 4

Glue large coins onto 3 side circles of a cardboard spinner blank. Glue the second piece on top. Then you can paint the product in any color, draw something. Fantasy is not limited.

Step 5

Using a thick knitting needle or an awl, we make a hole in the center of the future spinner with a diameter of about 5 millimeters. We also make holes in two small circles.

Step 6

We cut off a piece 0.7-1.2 centimeters long from the handle shaft and insert it into a small circle, fixing it with glue.

We make sure that the glue does not get into the center of the toy, otherwise it will not spin.

Step 7

Glue the remaining 2 circles over the ends of the rod. They can also be colored.

A funny toy is ready!

Video instruction from YouTube channel Lum Planet

(0)
Why do some countries want to ban the spinner? Adults may not know the name of this fancy toy. And any child who has already learned to speak will immediately answer: “This is a spinner! […]
(0)
What are spinners? They are a small gadget, in the center of which there is a bearing, and around the circumference there are small blades. Spinners - a modern fitness tracker, […]
(2)
Plasticine furniture for a toy house for children 4-5 years oldIn this step-by-step instruction, the kids and I will sculpt plasticine furniture. In the last lesson, we sculpted a cake and […]
(1)
Plasticine craft for a child 3-4 years old. What will we do today? Modeling crafts from plasticine. After all, this is a plasticine craft exciting activity, which even children 3-4 can do […]

If you are reluctant to buy spinners in the store, feel sorry for hard-earned money, too lazy to wait for delivery, or just a creative impulse plays in your soul, then you can try to assemble the turntable yourself.

With even hands, the toy will turn out no worse, and often even better than the purchased one - after all, you put a piece of yourself into it.

How to make a do-it-yourself spinner

1st method: we make a spinner from bearings

We need bearings, for example, from a skateboard. Before using the bearing in practice, it is necessary to clean it of grease, otherwise the turntable will rotate quietly, but not for long. This method is very simple, since you do not have to make a spinner body, all we need is four bearings.

They need to be decomposed into correct form. In order to make this form accurately, use a squared notebook sheet. After we have a perfect triangle, we glue the bearings together with glue - best of all, superglue or cold welding.

Or you can draw a circle with a compass and divide it into 3 parts, like a Mercedes badge. Drawing and geometry lessons to help.

When the glue is dry, it is necessary to increase the bonding area, for this we sprinkle the glue with salt, then the area will increase and the bearings will hold each other better. At the end, we wrap the gluing points with any thread and impregnate it with glue, this will betray even more strength.

A few video instructions on how to make a spinner from bearings:

And another option without a rope:

2nd method: spinner with clamps

For the next method, we need two ties or clamps. They need to be inserted into each other. After that, we place three bearings in the center of the ties and tighten the ties until they are firmly held.

Cut off the protruding ends. In principle, at this stage, the spinner is ready, but it does not hold firmly. In the event of a turntable falling, everything will fly out of it. We don't need this, of course. Therefore, it is necessary with the help of glue to make it more reliable. In all places where the bearings interlock, where the ties touch the bearings, it is necessary to drip with glue.

Such a spinner, due to its high degree of gravity, spins for less time and not so fast, but it is easier to manufacture.

You can see in more detail how a spinner with ties is made in the video:

How to make a spinner without a bearing

We need: six plastic bottle caps, a toothpick, a large gel pen refill, coins and glue.

To begin with, we take one of the covers and make a hole in it, using a burner or soldering iron, on extreme case hot metal nail.
Now we cut off a small part from the rod, about a centimeter long and paste it into the cork.
After that, we take two more plugs and cut off the upper part.
Then we take a toothpick and cut off the sharp ends so that a stick remains, about three centimeters long.
Using glue, glue it to the top of the cork.
After that, we pass it through part of the rods and glue the second cork. The middle plug should spin easily.
In the end, it remains for us to glue the remaining three plugs.

To understand what it is all about, watch the video where it will be step-by-step instruction how to make a spinner from plastic bottle caps:

As a result, we already have a pretty good spinner, but in order for it to spin even better, it needs to be weighted. For this we will use coins. We take a coin and glue it to each of the corks. That's all, our spinner is ready.

How to make a paper spinner

1st way: from cardboard

We make a template for a spinner from cardboard using a plastic bottle cap.

We circle it so that we get a triangle. We connect the circle with the rest of the circles with smooth lines and cut it out.
We put the finished template on cardboard, circle it and cut it out.
We also need four more circles of a smaller size, we make them.
Now we need coins. We take them and glue them on the sides of the first half of the spinner, and glue the second half on top.
Using nail scissors, make a hole in the center of the spinner.
Next, we need to cut off about a centimeter of the rod from the handle, and make small holes in two small circles.
All the details are ready, now you can paint our spinner with paints to give it a more beautiful look.
Now we assemble our spinner from the resulting parts. We insert the axis into one circle and glue it, put it into the spinner and press it on the other side with another circle.
Glue the remaining two circles on the sides. That's all, a homemade paper spinner without a bearing is ready.

For details, watch this video:

2nd method: paper spinner

To make such a spinner, we need two square sheets of paper and two pushpins. The assembly diagram will look like this:

We advise you to immediately watch the video, otherwise the instruction may seem too complicated:

We fold the sheet in half, then open it, like a book, we bend both sides of the paper to the bend.
Next, we fold the resulting rectangle again and get an even smaller rectangle.
We fold the resulting figure in half to make a bend. Then we open it and put it vertically.
We take from the lower left corner and bring it to the right side. You should get a figure similar to English letter L.
We repeat the same with the other part of the paper, only now we bend it to the left side.
From the resulting figure, we bend each corner so that we get two triangles at two ends.
We make a rhombus out of the resulting one, run our fingers several times along the bends and open it back to the previous figure.
We repeat the same with the second sheet of paper, only at the fold stage we do the folds in the opposite direction.
We connect the two resulting figures together. We put the ode vertically, the other, on top, horizontally. We fill the corner of the vertical figure into the corners of the horizontal one. As a result, you should get a figure that looks like a shuriken.
Now we make a hole in the center of our star, using a pushpin so that it can spin with ease.
Now we take the second button, heat the iron tip and take it out. We put on the remaining cap, on the other hand. Spinner is ready.

Option one: difficult, but interesting

We will use really only improvised means. We will need:

wooden ice cream sticks (20 pieces);
metal or ceramic bearing (if you want the spinner to spin easier and longer, opt for the latter) size 8*22*7;
50-kopeck coins (make a hole in its center with an awl) (12 pieces);
nuts and bolts, small in size and diameter (4 pieces each);
buttons from jeans or jeans (or the simplest pushpins) (2 pieces);
glue;
sandpaper;
paint (it is more convenient to take aerosol).

How to make a spinner?

Step 1: Preparation

We take two wooden sticks and cut each into two equal parts (along). That is, at the output of two sticks we already have four.

Now we take five whole sticks, press them tightly against each other and apply a layer of glue on top. We put the second layer of sticks on top: put four whole ones in the center, and put the previously cut sticks along the edges. We cover with a layer of glue and them. The third layer will consist of five whole sticks (like the first one). The fourth and last layer is a repetition of the second.

At the output, we have a base consisting of four layers of sticks glued together.

Step 2: Basic work

Choose the size of the spinner for you. We will tell you on the example of a 9 * 9 square, but the proportions can be freely changed.

Make marks on the workpiece and cut out a square (say, 9 cm).

Now inside the square we draw an equilateral triangle. To do this, divide one of the sides of our square in half and draw two 9 cm segments from this point, and then connect the ends.

Then divide each side of the triangle exactly in half and make serifs. Connect each notch to the opposite vertex. The intersection point of these segments (they are called medians) is the center of the spinner, in which we will place the bearing. Outline it with a pencil.

On the same segments, make notches at a distance of 2.5 cm from each vertex. Place a coin in the center of each of them (a hole is needed to align the hole with the serif and not go astray) and circle it with a pencil.

Using an awl or a sharp knife, dig holes inside the traced outlines. And then loosen them to cut even holes. You can press the bearing and the coin into the workpiece (but carefully so that the glued layers do not separate).

Cut out a triangle from the workpiece. Now we make two-centimeter serifs in the center of each of its sides. Like this:

The notch height at the median is 7 mm. Cut out these side triangles.

Step 3: Polishing

We take sandpaper and sand the surface of the future spinner. We walk around the edges. We paint the workpiece on both sides and leave to dry.

Step 4: Loads

We glue four coins together. We will have 3 stacks that we will insert into our holes in the spinner. Place the bearing in the center.

To make it easier to turn it, we place the previously prepared buttons or buttons in the center of the bearing and glue them. Ready product can be varnished.

Tip: if you own a jigsaw and a drill, take note of the diagrams from our instructions and make the spinner body not from ice cream sticks, but from ordinary wood panel. Then just sand your workpiece with sandpaper, paint and varnish.

Ready!

Option two: the easiest

Using superglue, glue gun or cold welding connect three or more bearings together. A video tutorial on making a spinner at home is below.

Option three: energy-intensive

It is most reliable to connect the bearings not just with glue, but also with a housing. For this, ordinary screeds are suitable, as well as wooden (as in the first method), plastic and metal cases. How to make them, see the next master class.

Option four: for cyclists

If you have an old bicycle chain, this DIY spinner is for you. True, you will have to work hard to make this popular toy. We lay the chain in a special way, fasten it with a tie, fix it, put the bearing in the center. Watch the video for detailed step by step instructions.

Option five: if you don’t have cutting tools, but you still want to make a spinner

Spinner made of paper or cardboard - too great option this toy. It will spin no worse! We take cardboard and a compass, cut out 4 circles of equal diameter from it (determine the size of the spinner for yourself, it doesn’t matter), glue them together. Take bright cardboard or paper to make the toy more attractive and please you not only with its properties, but also with its appearance.

Make holes for bearings slightly smaller than the diameter of the bearings themselves. This is necessary so that they sit tightly and do not slip out when you twist your toy. Learn more about making such a spinner in this video.

Option six: if there are no bearings, but the spinner is still very necessary

If you do not have bearings, the spinner can be made from simple material, which is easier to get - from plastic caps. We need six pieces (take colored ones to make the toy look prettier and more interesting) and a toothpick or pen rod.

Let's see how to make a bearing from plastic caps.

Bonus

The video tutorial below shows three of the most simple ways making a spinner at home. All of them somehow repeat three latest instructions(No. 4, 5 and 6), however, in this video you will also find a few important tips for the production of a popular anti-stress toy.

Choose the method that seems most interesting and understandable to you. It is quite possible to make a spinner with your own hands in 2-3 minutes, or you can get confused and make a toy in a more time-consuming way. The result will directly depend on your efforts. However, no matter which method you choose, at the end you will definitely get a cool anti-stress toy, which is so popular today.

The Rubik's Cube is already in the past. Today's kids are obsessed with pocket sized toys that spin around. Spinners are so captivating for children that some schools have already banned bringing them with them. On the other hand, toys help relieve stress and calm children who have a special temperament.

Spinners are collectible now and they are something of a status. No child wants to show up to school without the most basic play device. If you're on a budget and want it to have a great toy that really stands out from the crowd, there's an easy solution: you can make your own spinner.

There are a few various ways make a spinner, for example, cut it out of cardboard or use old recycled lighters. However, if you try this at home, be aware that the spinner may cause damage to your skin. With that said, there is simple methods. The choice is yours.

How to make a spinner using plastic bottle caps

For this you need: 4 plastic caps, a box of cereal, a knife, super glue, a plastic mug, paint or glitter

Collect four bottle caps. Take four plastic lids from used bottles that are the same size. Glue them together so that all sides meet the middle cap, and then crease the opening in the middle cap of the bottle with a toothpick.

The weight of the adhesive inside the caps. Some prefer to stick pennies on inside caps for extra weight, but household items like magnets will work the same way.

Replace bearings with paper. Place the bottle cap over the plastic cup and cut out the circle. Once the circle is cut out, poke a hole the size of a toothpick and place the plastic circle on the inside of the bottle cap to line up the empty space. Then take a dime draw 10 circles on the box and cut them out.

Make sure all holes line up with each other; this will be an important step towards proper rotation of the spinner.

Glue the circles together. Stick your toothpick in each circle and glue five cardboard circles together, lining up the small holes. Take two more penny circles, and this time avoid punching a hole through them and glue each circle on one side of each five.

Attach all parts together with glue. Take a toothpick and one stack of cardboard circles and glue the toothpick in the middle. Attach a toothpick to the center of a medium bottle cap and snip off the end. Leave some toothpick on the opposite end and glue that end in the middle of another stack of cardboard circles to act as a bearing. Your spinner should now spin like the original.

Decorate your creation. Now that your spinner is almost ready, paint or adding glitter to your toy will complete the job.

How to make a spinner using skateboard bearings

Materials needed: plain bearings, knife, thick rubber band, super glue.

Assemble three skateboard bearings. Take the three skateboard bearings you chose and align them together horizontally. Take the middle bearing and pry out the middle tread with a knife to expose the wheel inside.
Glue them together. Glue the three bearings together in a straight line with super glue and wait until they dry.
Cover with rubber band. Wrap a thick rubber band around the outer edge of the three support bearings for support, and decorate the rubber band if you want to add some character to your new toy.
Can do Alternative option spinner, which is more like a traditional spinner. You need to assemble four bearings for a skateboard and follow all the same steps. The middle bearing will have an open wheel and the other three should be glued proportionately around the center.
Once your feeder is complete, place thumb and the middle finger in the center of the toy and drop the life tension.

How to create a paper spinner

What do you need for this:

Cardboard.
Scissors.
Safety pin.
Toothpick.
Glue.
Stickers.

Cut the cardboard into four small circles and one propeller shape.
Poke holes in the center of each of the circles and propeller with a pin or pointer.
Apply a patch of glue to the back of one of the circles and insert a toothpick through the hole. Add a second circle to the toothpick and press down on the pieces of paper to seal the glue and attach the pieces to a toothpick.
Add propeller to toothpick.
Repeat step 3 with the two remaining circles, leaving about 1/4 inch between the first set of circle and this one (the prop needs room to rotate).
Remove the extra ends of the toothpick from the spinner and decorate with stickers.