P-44T layout with dimensions
Apartment layouts in P44T with redevelopment options
Layouts two-room apartments series P 44t
Two-piece vest
Usually has an area of about 60-64 sq.m. The kitchen has a large bay window, and each of the rooms has a spacious balcony. In fact, this is the same three-ruble note, only with a “bitten off” eleven-meter room and a section of the corridor adjacent to it.
Linear kopeck piece P-44T
The area of one-sided two-room apartments fluctuates around 52 sq.m. (51-53 sq.m.). They have small corridors and balconies.
One-room apartment P-44 T
The area of one-room apartments in P-44T is about 36-38 sq.m. In them small balcony and a shared bathroom.
Three-room apartments P-44T
In terms of areas and configurations of three-room apartments in the P-44T series, the greatest variation is observed (approximately from 73 to 86 meters). There are also a lot of planning solutions. Kitchens in three-ruble corner sections do not have bay windows, and their area usually does not exceed 10 meters. At the same time, 3-room apartments in row and end sections P-44T boast kitchens with a bay window and a total area of 12 to 14 sq.m.
Three-room apartment with a bay window in the room (end apartment p44t)
A huge proportion of the population of Russia and other post-Soviet countries lives in standard buildings, and sooner or later they all face repairs. Since the apartments in each series of buildings have the same layouts, there are the most popular and good decisions for premises of each series. In this article we will talk about the design features of two-room apartments P44T and give some recommendations.
Types
There are only two types of two-room apartments with two in the buildings of this series:
- The so-called “vest”. Both rooms are located symmetrically, each of them has a loggia. This option is considered less convenient because in design 2 room apartment P44T "vest" is more difficult to carry out redevelopment.
- The next type of such dwellings is characterized by the presence of a bay window in the kitchen area. This version is easier to customize for yourself, since in the design of a 2-room apartment p44t with a bay window, it is possible to more easily arrange a dressing room.
- For the first type of housing, a good idea would be to remove the door between the kitchen and hallway. Thus, the kitchen becomes lighter and more spacious. It doesn’t hurt to use the same floor finish in the kitchen and hallway; it will also unite the entire space together.
- If you have children, give them one of the rooms, and in the second create both a bedroom and a living room at the same time.
- For the second type of this dwelling, a special kitchen furniture, repeating the shape of a bay window. You can place a tabletop along the window, thereby extending work surface, or you can purchase or order a table that will fit in just right. In any case, there is an opportunity to play with this feature in an interesting way.
- In addition, for such a living space, combining the hallway and kitchen would also be a great idea.
- In the hallway, in the space between the bathroom and front door fits in perfectly small closet, and in front of the entrance to the largest room, a dressing room. This will avoid bulky cabinets and an untidy appearance.
- Use light colors, lungs natural materials, proper lighting. This will visually expand the footage and make the place of residence much more comfortable.
Try to combine all living areas into one whole thanks to a common style solution.
In P44T houses, the design of a two-room apartment is generally no different from any other, with the exception of the points listed above. Since it is impossible to understand all the intricacies of such a complex process as designing the future appearance of a living space, we recommend hiring a professional designer. Our company employs only the best and most talented employees who will help you make your interior truly comfortable, stylish and reliable. You will be pleased with the results for many years. Only a true professional is able to recognize all the true desires and needs of all members of your family. If you don’t want to waste money on materials and work of builders, you need a designer.
In today's urban housing construction, the most common layout is P44T, which has a number of undoubted advantages. Back in the seventies, the construction of new houses of the P44 series began according to standard projects. Essentially, this was the first step towards further development and implementation of more modern technology construction and planning of living space.
Features of the P44T layout
P44T - a layout with dimensions that meet the requirements of the present time, offers about ten solutions. Options for residential sections have been developed for regular and corner apartments. This planning model is used for residential multi-storey buildings height from 9 to 25 floors. For comfortable lifting of residents and furniture to the desired floor, at least two elevators are provided: passenger and freight.
Modern planning ideas
The main idea of the P44T layout is maximum use of space. In this context, we can give an example of a successful engineering solution that made it possible to increase the kitchen area. Such important square meters of the kitchen for every housewife were freed up by placing a ventilation duct in the corridor. P44T - layout with dimensions suggesting a room height of 2.7 m, which ensures comfort and good access of daylight to the apartments. Modern ideas planning made it possible to use attic space. The layout of the apartment P44T with the step sizes of the transverse walls increased to 4.2 m makes it possible to perfectly improve the premises. They are often combined with a regular floor, resulting in a two-story apartment.
Advantages of P44T
The P44T house layout with internal floor sizes of 0.14 m and 0.18 m is reliable and has long term operation. Wear resistance and stability of external walls against external influences is ensured by finishing ceramic tiles 0.30 m thick, imitating brick, which is securely fixed to the facade. The use of high-quality double-glazed windows guarantees good thermal insulation, protection from noise and creates comfort. Equipped with various modern systems control provides a guarantee of safety in case of fire and the threat of flooding. Also in this type, sensors for opening doors of technical rooms and electric meters. P44T - layout with dimensions corresponding to the standard standards of these projects, involves laying electrical wires inside the panels. This increases operational safety and protection of the wires themselves during any repair or construction work.
Very important advantages houses with the P44T layout have a short construction period and a long period of operation. The service life guaranteed by specialists is more than one hundred years.
The P44T layout, with wall dimensions much larger than in buildings built in previous years, provides additional structural reliability, better sound insulation of apartments and good thermal insulation of premises. During construction, high-quality heavy concrete is used, which is responsible for increased wear resistance.
Disadvantages of P44T
Along with a number of advantages, we can name some disadvantages found in houses of this type. One of them is the unevenness of walls and floors. It is easy to eliminate this deficiency by performing leveling and providing additional sound insulation.
Technological differences in the P44T 25 layout
The P44T 25 layout with the dimensions described below is a modern and improved type of layout used for residential buildings with a height of 25 floors with an increase in apartment areas. In this case, the width of the walls in cross section is greater, and three-room apartments are equipped with an additional bathroom. The technological differences of the P44T 25 consist of an increased number of floors with an increased number of elevators to three with a load capacity of two of them of 630 kg and one of 400 kg. The kitchen area has been increased to 9 square meters. m in one-room apartments; up to 15.9 sq. m in two-room linear ones; up to 13.8 sq. m - in three-room and large apartments. The total areas of 1-/2-/3-room apartments are 37.4-38.8/51.7-63.4/77-84.6 sq. m. m respectively.
Bay windows in houses P44T
P44T - layouts with the dimensions indicated above increasingly include the use of bay windows, making apartments not only aesthetically more attractive, but also increasing the area of the room. Part of the window space is taken out to external facade in the form of a trapezoidal or other shaped protrusion, thus increasing the volume of the room. This method is most often used in kitchens. Thanks to bay windows, the room receives additional illumination, increased space, and the facade of the house looks more attractive. The protrusions may be various shapes: rectangular, triangular, polygonal or round. It is possible to use and design the bay window as a separate zone, then it is separated from the main room by a bar counter or a visual partition, for example, a screen. A truncated version - a half-bay window - is also deservedly popular.
Design solutions for kitchens or rooms with a bay window can be much more interesting than usual.
P44T - a layout with dimensions that are perfect for a comfortable life, today it is the most common in multi-storey buildings residential buildings. Architects and designers who worked on solving the problems of maximizing the convenience of apartments not only implemented them in the project, but also made the layout interesting and original.
These dimensions were taken by me personally in my apartment at the stage of finishing the installation of the house. Regarding the size, it is worth noting that the higher the floor, the larger the area of the apartment, as the walls on the upper floors are darker. In my case, the area of the apartment is 0.5 square meters larger than the area specified in the preliminary purchase and sale agreement for the apartment, and this is more pleasant than getting a minus in the area of the apartment located on one of the lower floors.
Now let's move directly to the layout of the apartment and compare it with another offer for a three-room apartment in a building of the 111-M series from the GVSU company. The dimensions of a three-room apartment are presented in the following figure:
Comparison of 3-room apartments of the P-44T and 111-M series
The area of these apartments is almost the same - who likes which one more. This is a matter of taste and needs, but I liked the layout of the P-44T better. Why?
1. Location of the bathroom.
In P44-T the bathroom is located in the corridor near the hallway, and in 111 between two rooms. In the second option, in the rooms near the bathroom you will always hear the noise of water, doors opening and closing, which will disturb the silence in these rooms.
2. Kitchen.
In P44-t and 111-M the kitchens have similar areas, but in the first version the kitchen has a bay window. Thanks to the bay window, there will always be light in the kitchen, and the kitchen will have a more beautiful appearance.
3. Corridor.
In P-44t the corridor is wider and shorter, which will allow installation in it nice closet for out-of-season clothing and other things, and in 111 the corridor is narrow and long, which does not allow its space to be used to advantage.
4 rooms
What I liked about P-44T is that the rooms are wider, which allows for more efficient use of their space, while in 111-M the rooms are quite narrow, which does not allow furniture to be placed on both sides of the rooms. Also in P-44T all rooms different sizes, thanks to this you will have more “maneuvers” in choosing the purposes of each of the three rooms.
5. Balconies
The P-44T has two fairly spacious balconies, while the 111 has only one. It is worth noting that the cost square meter cold rooms, as a rule, are half lower than residential ones, which means that you pay half as much for balconies and at the same time get more square meters.
6. Ventilatorion boxes
The location of the ventilation ducts in both options is quite good, but note because in P-44t the box is located in the corridor and if the house is higher than 17 floors, then the plus turns into a minus, since a second box appears next to the first and the corridor opposite the bathroom becomes narrow^
If you have any questions, ask them in the comments - I will definitely answer them!
New buildings of the P-44t series are among the most common in large cities of Russia. Despite the good original apartments, you can make your home even more comfortable and thoughtful with the help of redevelopment.
Most of the walls in apartments of houses of the P-44t series are load-bearing. Since 2007, they began to build houses with niches in load-bearing walls in apartments above the sixth floor, in those places that turned out to be the most popular for redevelopment. These niches can be converted into a doorway without additional reinforcement with metal structures. In houses before 2007, it is still possible to approve such an opening. State Unitary Enterprise MNIITEP, the author of this series of residential buildings, prohibits making openings in load-bearing walls in unauthorized places and cutting off window sill blocks in houses built after 2007.
Today we will look at options for redevelopment of a two-room apartment with an area of 60.3 m². We took them from the portals Ideas for Your Home, Zhilekspertiza and MVK Service to analyze successful and not so successful solutions.
Initial layout
The layout includes two isolated rooms, a kitchen, a spacious corridor and a separate bathroom. The kitchen has a bay window, the rooms have a balcony and a loggia. One of the variations of the original layouts also has a bay window in the bedroom.
Option 1
What has changed:
- Consolidation and expansion of the bathroom. The increased space will allow you to place a cabinet and washing machine. Make an informed decision: "".
- A partition was added in the bedroom, which allows for a better placement of the entrance to the room and a niche for a small dressing room or wardrobe with access from the room.
Coordination: load-bearing partitions are not affected, the wet area has not been moved - coordination will not be a problem.
A modification of the same solution, only without erecting walls in the bedroom. Demonstrates the possible arrangement of furniture during such redevelopment.
Option 2
What has changed:
- Unification of the bathroom. Without expansion, as in the previous version, but it became more spacious.
- The partition between the corridor and the kitchen was dismantled and moved, creating an additional niche in the kitchen: a definite plus for a small kitchen.
- A piece of the corridor was fenced off to create a storage room: comfortable spot for storage.
- We created a doorway between the kitchen and living room. This is a necessary measure to create a pantry, but now the living room has become a passageway: guests or relatives will not be comfortable in it, and this room cannot be converted into a nursery or bedroom either.
- A sliding partition appeared in the bedroom, allowing it to be divided into two zones. For example, a bedroom and a nursery or a bedroom and an office.
Coordination: the dismantling of non-load-bearing partitions and the installation of new ones is not difficult to coordinate. Organization of the doorway in load-bearing wall may cause coordination difficulties in apartments where niches are not provided in this place, but it is still possible to agree on the change.
This solution is very similar, only instead of increasing the kitchen space, an increase in the bathroom is chosen, and the pantry is smaller:
Option 3
What has changed:
- The bathroom was combined and expanded through the corridor. We are not sure that such a large bathroom will be functional: we like the previous option with a storage room better.
- Creating a doorway between the kitchen and living room, as in the previous version.
- Two partitions were erected in the bedroom to make an easier entrance and create a niche for a closet or bed. This is a logical solution that does not require special costs.
Coordination: the bathroom occupies part of the corridor, which means moving the wet area: it needs to be waterproofed, then approval of the redevelopment is possible. The doorway is similar to the previous version. The construction of partitions in the bedroom does not cause problems.
Option 4
What has changed:
- Dismantling partitions between the bathroom and toilet to expand the bathroom. The toilet is organized by erecting a partition in the corridor. A good option, if you need a spacious bathroom, but at the same time a separate toilet is more suitable for you.
- Construction sliding partition in the bedroom similar to option 2.
- Doorway between the kitchen and living room, similar to options 2 and 3.
Coordination: again the wet area moves into the corridor, and in this case there is also a need to extend plumbing communications. This is difficult both for implementation and for coordination, but it is possible to solve it.
Option 5
What has changed:
- Simple combination of a bathroom.
- Construction plasterboard partitions under wardrobes.
Here the partition between the corridor and the kitchen is additionally demolished and the possible arrangement of furniture is shown:
Coordination: only dismantling of non-load-bearing partitions. If the waterproofing of the bathroom is observed, approval will be easy.
Option 6
What has changed:
- Expansion of the bathroom due to the corridor.
- Creating a spare toilet with an entrance from the kitchen. In our opinion, this is not a very practical solution.
Coordination: it is necessary to agree on the transfer of the wet area to the corridor and waterproofing, the layout is compatible.
Option 7
This apartment is from the basic modification, houses of the P-44 series. P-44 and P-44t have a similar layout of two-room apartments, only the square footage is reduced and there is no bay window in the kitchen and no balcony. We are considering it because of the interesting redevelopment, which can partially be implemented in P-44t houses.
What has changed:
- Moving the kitchen to the hallway - interesting solution. The dining area in this case is organized in place of the living room, which is located in the room that in previous versions was allocated as a bedroom.
- Moving the bedroom is possible here because instead of the kitchen there is a large bathroom with a sitting area and a window: a paradise for lovers water procedures. It turns out to be a personal bathroom adjacent to the bedroom and a passage only from it, cut into the wall.
- There is a guest bathroom in the hallway.
- The doors to the bedroom and living room are shifted so as not to make the space near the kitchen very cramped.
Coordination: there are many difficult decisions here, such as moving the kitchen into the hallway and the bathroom into the kitchen. For the P-44t series it will be difficult to coordinate the transfer large quantity doorways. It is not possible to agree on such redevelopment in all cases.
Photos: mvk-service.com, ivd.ru, zhilex.ru
