Devices for removing apples from a tree. Fruit picker for apples: types and tips for choosing. Bicycle combine for comfortable work

If this year you have not only a rich, but also a high-lying apple harvest, then harvesting it in the traditional way, shaking the branches, erecting a stepladder, will not be so easy. Many gardeners and summer residents in such a situation have opted for a device for picking apples. Such a device can be easily purchased at a specialized store, or you can make it yourself from improvised materials. We will present you both options at once.

Buying an apple picker

Modern fruit collectors are easy to use, light and compact. Their assortment will also be rich: tools differ in the functions of the apple picker.

Plastic "tulip". The plastic nozzle-glass is made in the shape of a tulip. Picking fruit with it is easy - put an apple in the "tulip", placing the handle between the petals, scroll the handle around its axis, thereby safely plucking the fruit and bringing it to the basket in a fruit-collecting glass. But if the bullseye is firmly attached to the branch, the device will be useless.

Collet devices. A popular type of such fruit pickers with telescopic handle, if you wish, stretching in length. They are supplemented with a convenient tight bag: in one go you can collect several fruits at once. The action of the device is simple: the tin petals grab the apple, and you cut it off with the help of circular movements of the device around the axis. These parts are found both in plastic and equipped with a metal knife for cutting a solid handle.

Wire fruit pickers. They are a fetus invader made of thick wire strings. You put the device on the apple, the wire tightly wraps around it, and with the familiar rotation of the device around the axis, you cut off the fruit. It remains trapped in the wire frame while you carry it to the basket.

Fruit picker with grab. There are also models with an extension handle - a telescopic tube. The operating device resembles a plastic beak or a three-fingered hand. What is convenient, it can capture both an apple-ranet and a rather large fruit. The fetus is cut off by the same torsion of the device around itself. But there are also more advanced mechanisms: you need to pull the fishing line or lever, after which the “beak” will grab the fruit, and you pull the fruit picker towards you, picking the apple from the handle.

After such a review, you yourself saw that the design of the device is simple and homemade fruit picker it will be easy to assemble. We will borrow the principle of the gripping device from those already presented.

Option number 1: a fruit picker from a bottle

We will make a device for collecting apples from a plastic bottle. The device will need:

Plastic bottle.
A piece of fishing line - 2.5-3 m.
Awl.
Scissors.
A wooden pole, a long mop handle, a piece of PVC pipe - everything that can become a holder of a fruit collector in length and thickness.

Once you have everything you need at hand, we get to work:

Cut off the bottom of the bottle so that the edges of the part with the neck resemble a tulip.
On each of the petals, make holes with an awl.
Pass the fishing line through the neck of the bottle. Its lower part (the one that remains at the bottom of the bottle) should be approximately equal to the top.
Now we pass the fishing line into each of the holes made. Then we bring it out again through the neck back.
To build a device for picking apples, we only need to fix the grip on the holder. To do this, stepping back a little from one of its ends, we do through hole.
If it is difficult to drill such a hole (for example, on a wooden pole), then you can do the following: take the usual plastic cover from soda, drill two holes opposite each other through its sides. Through them, fix the fishing line with the invader. Further, if necessary, sharpening the edge of the holder to the diameter of the cork, glue them together with strong glue.
We pass the double fishing line several times through the hole made in the cork or holder and securely fix the grip structure.
At the same time, do not forget to leave the long end of the fishing line to such a length that, while on the ground, it would be convenient for you to squeeze and unclench the "petals" with it for a more successful capture of apples.

Option number 2: plastic bottle-bowl

And another DIY craft from plastic bottles. A fruit picker is made in literally two steps:

Cut off the bottom of a plastic bottle - you can immediately put it far to the side. On the rest, cut out sharp teeth. Drill two holes directly opposite each other in the neck of the bottle with an awl.
Now the preparation of the holder - the pole, pvc pipes, mop handles. Adapt the thickness of one of its ends to the diameter of the bottle neck. Putting the gripping element on the pole, fix it through the holes made with two self-tapping screws on the holder. That's all!

Using this apple picker is simple: thread an apple into this bowl so that its stalk is between the cloves. A few turns of the device around you - and your fruit!

Option number 3: closed bottle fruit collector

And again crafts from plastic bottles. Making it with your own hands is just as easy:

Make in the side of the bottle round hole.
From the bottom, provide it with sharp teeth.
Some gardeners advise making a heart-shaped hole.
In one of the ways convenient for you, put the neck of the device on a pole, a stick.

The apple here is placed inside the bottle through the hole made, after which you scroll the device, and the fruit is inside the fruit box. However, with such a tool it will not be possible to remove more than two fruits at a time.

Option #4: Sturdy Tin Can Construction

Not always the stalk of an apple lends itself easily to a fruit collector from a plastic bottle. For strong twigs, a device from a large tin can is perfect (taking into account that an apple can fit in it). This do-it-yourself apple picker is done like this:

On one side of the jar, cut a shallow line from the top with a utility knife.
Using pliers, spread the sides of the slot so that it becomes wedge-shaped, with acute angle at the bottom.
Opposite this "trap" for the handle, make two holes.
Using a strong wire, securely fix the fruit collector on the pole through the holes made.

Option number 5: plastic pipe fruit collector

Another device for hard-to-pick fruits. You need to try to find a thin plastic pipe of such a size that even large apple. And converting it into a fruit picker is simple:

Make a J-shaped hole in the wall of the top of the pipe.
On the lower tail of the "letter", which should look up, fasten the blade. If the stalk is stubborn, you pass it into this trap and cut off the twig, sharply lifting your device up.
Cut the lower edge of the pipe in the form of sharp triangular teeth.
Heat the pipe, after which the teeth can be easily bent, forming the bottom of the fruit box.
Drill holes in the thickness of the pipe through which you attach it to the pole with wire.

Option number 6: from a fishing net

If you have an aquarium or fishing net, then you already have a ready-made fruit collector for apples. Perhaps, in order to deal with recalcitrant cuttings, you will need to attach a device to the hoop that would tear off and cut off the branch. By the way, for convenience, the net in relation to the handle can be carefully bent at an angle.

Having understood the principle of the fruit picker, you can make it from other materials at hand. Let's see what summer residents have already come up with:

A hoop made of thick wire and a linen bag stretched over it.
Basket and galvanized hoop as a knife.
The design of two metal rings: a bag is stretched over the static one, and a small movable one can be tightened over it with a fishing line around the handle.
Construction of scissors, spring and pole.

Thus, making a fruit picker from improvised materials is absolutely not a difficult matter. And by giving free rein to your ingenuity, you can even come up with your own unique model of this device.

When the time comes to collect fruits from tall trees, the most beautiful and ripe ones are so high that even with the help of a ladder it is impossible to reach them. Of course, in this case, you can use a long stick, with which the fruits are knocked down. Some summer residents shake trees, but the apples are damaged and lose their attractive appearance. appearance. An alternative solution is to use an apple picker. If it is not at hand, and you don’t want to spend money on the acquisition, then you can make such a tool yourself in a short time. As a result, it will be possible to obtain a fruit picker that will not differ in efficiency from what is produced in the factory.

Selection of design features before manufacturing

If we consider fruit pickers, they can be divided into several groups. The first of these are tools that are equipped with cutters at the end of the rod. With this add-on, it is possible to cut off the stalk, and the apple will fall into the container, which is located in the immediate vicinity of the cutter. Such a device for picking apples has a movable knife, which is driven by a special traction. To Work with similar device quite tiring, since the cutter is located on the bar, or rather, on its long arm. This creates extra weight, which is quite respectable. The apple picker may also belong to the second group, the tools of which resemble mechanical hand equipped with fingers. The latter are made of wire. After the apple or pear is captured with the help of special fingers, the latter are clamped by means of traction, and the fruit is in the container. This action is performed using a traditional twine. This is what allows you to tear off the fetus. As a minus of this tool, one can single out the fact that the branch itself can break off along with a pear or an apple.

The third group of fruit pickers

If you will be making a device for picking apples, then you can take as a basis the third group, which is the most common in terms of design features. Such structures are made of elastic lightweight plastic or fabric. And the shape of the product is a bowl equipped with petals. A special container must be attached to a wooden pole. Apples are removed by a fairly simple rotation of the pole around an axis that is oriented along. At the same time, the leg is trimmed by means of the petals of the tool.

Preparation for the manufacture of the fruit picker

A device for picking apples from a tree should be made only after you have chosen one of the proposed ideas. The third variety will form the basis of the simplified design of the fruit picking tool. First you need to prepare a plastic bottle. If you have to collect fruits that are quite impressive in size, then a container volume within 2 liters is suitable, while for medium-sized apples or pears, a bottle is suitable, the volume of which is limited to 1.5 liters. Every summer resident will surely have such bottles in stock.

Process technology

If you will be making a device for picking apples with your own hands, then you need to cut off the bottom of the bottle, and then make an angled cutout. It will be convenient to use both a knife and scissors. The above cut along the bottle can also be made on the opposite side.

After the bowl has been prepared, it must be attached to a pole, the last of which can be a long light rail. Fixation can be done with a wire or self-adhesive adhesive tape. After that, we can assume that the fruit picker is ready for operation. To use it, the tool must be brought under the pear or apple, and then rotated around the axis. This will allow you to cut the fetal leg using the cutout that is located on the instrument. The apple will be in a bottle, which can simultaneously act as a collection container and a cutter. A similar device for picking apples from a plastic bottle can be used without lowering the container for some time. Several fruits can fit in one bottle.

Making a fruit picker from a bottle and fishing line

Before you make a device for picking apples, you need to decide on design features future instrument. The same plastic bottle, a mop handle, which is sometimes replaced with a PVC pipe, or a fishing line can form the basis. The length of the latter can vary from 2.5 to 3 meters. You will need scissors and an awl.

Manufacturing process

First you will need to make the so-called enough, which is made from a plastic bottle. The bottom of the container must be cut in such a way that it looks like a crown. Two holes are made in each petal, for this you can use an awl or a hole punch. At the next stage, the product should be given tenacity. For this, a fishing line is used, which is pulled through the neck into the container so that its upper end is threaded into each hole in a circle. You need to bring the fishing line back through the neck. This will allow you to get a bottle that is devoid of a bottom. Two long ends will come out through the neck.

The next step is to fix the holder, in the role of which a full PVC pipe should be used. A double fishing line from a bottle must be passed through the hole in the holder, leading out from reverse side. If the mop handle has removable handle, then this is good decision. To this part of the holder it is necessary to fix the ends of the fishing line. Two holes are made in the handle, into which the fishing line is threaded, the ends are fixed on the other side tightly. The handle is then put back on the handle. If you are making devices for picking pears and apples, then it is important to assemble the entire structure in such a way that the plastic bottle is tightly attached to the holder. The cut edges of the bottle are bent. In this case, you need to make grasping movements. This is the principle of collecting fruits with this tool. If the mop is devoid of a removable part, then its end must be removed, while retreating 10 cm. Two holes must be made on the sides, where the ends of the fishing line are threaded. After they need to be fixed together, and then connected.

For a PVC pipe, several bottle caps can be used as a handle. If you use ten caps, making a hole in the central part of each with an awl, then the free ends of the fishing line can be threaded through the caps, fixing them on the latter. For the stability of the covers, you need to glue them together or make a knot, placing it with inside first cover. This will allow you to get a fairly comfortable removable handle made of caps. In this case, it is necessary to use the same technology as in the case of a mop handle.

Conclusion

If you decide to make a device for picking apples from the ground, then you can use one of the technologies described above. However, the bottle may not have to be placed along the holder stick, but at some angle. This will allow you to collect up to four apples in one container, depending on the size, and then pour them into a bucket. One of these devices is quite simple to make yourself. To do this, you do not even have to visit the store in order to purchase materials.

When the trees in the garden are large and sprawling, reaching down the stairs, trying to get the next ripe fruit in the interlacing of branches, is not the best and not the fastest thing to do. Such a harvest can take hours, and the result will not be the best, because if it is not, you can’t get apples from the top. But since ancient times, if someone could not reach the upper branches, then he picked up a stick. She will rescue us again.

Picking apples with a pole

So, we need a long pole, on the basis of which we will combine the main functions of a nail puller and a basketball hoop: from the first - to cling, from the second - to pass a round object through itself. The task seems difficult, but in fact we need on the top of the rod (which can be telescopic, for example, an old fishing rod) 2 pins perpendicular to the axis of the pole. An apple stalk should easily pass into the gap between these protrusions.

Below we attach a small copy of a basketball hoop made of wire, for example, from a thick aluminum core from a cable. Only the usual through mesh will be replaced by a linen or the same mesh bag. We raise the device as high as possible, going over it with our hands until we grab the lower end of the pole. We bring the ring under the apple so that the stalk gets into the “nail puller”. We pull on ourselves, the fruit breaks off and falls through the ring into the bag.

In the old days, a game was very fashionable, when a wooden cup or cup made of the same material, or a small one, was attached to the top of a stick with a handle. wicker basket. To this device, which was called a bilbock, a ball was tied with a long cord, which had to be thrown higher and caught in the hole. We propose to do something similar to pick apples from a great height when there is no maneuver with a stepladder.

The easiest option is a plastic bottle. We cut off its bottom and, turning it over, put it with a neck on the upper end of a long pole, specially planed to the desired diameter, so that both parts are tightly connected.

Stick with a plastic bottle for picking fruit

Next, we make cuts from the edge of the resulting glass to a quarter of its length in increments of 2.5–3 centimeters so that they divide the bottle into equal sectors. Moreover, the resulting cracks should be wedge-shaped, that is, they should narrow downwards. Now it’s enough just to reach out to the apple, bring the device under it and catch it in a container so that the stalk is in the slot. We pull to the side, and the fruit is trapped, we cling to the next one. When the bottle is filled to the cracks, tilt the tool and pour the collected apples into a basket or box.

Another option is a rod-mounted wicker basket, which can be made from wicker or wire. The second type is preferable, since in this case several vertical rods can be made longer and their ends bent inward, so you get a hybrid of a bilbock hole with the previously used nail puller function. On the contrary, you can simplify the tool and put a two-liter plastic bottle on a pole without cutting it, but by making a round hole in the middle of its wall with a small wedge-shaped slot of 2 centimeters directed towards the bottom.

Any device listed above is only suitable if the apples break off easily and even fall themselves with a slight shake of the tree. But what if the cutting is firmly attached to the trunk? A “nail puller” can accidentally damage the flesh, and a “bilbock” itself can break or deform with a strong jerk. This is where tin cans come in handy.

The first option is the easiest. We simply fasten a large and deep tin can with a wire onto a stick, making small holes in the wall. Next, in the edge, we cut a gap in the shape of a wedge under the handle and slightly push it apart from the top outward, getting a kind of spout for a coffee pot. The sharp edge of the tin will easily cut off the apple from the branch.

Fruit picker

The second option is from plastic pipe large diameter, like those used for drains or sewers. We cut a segment about 40 centimeters long on one side with petals, which we bend inward, thus creating a closed end (even with slots). In the upper part we make a slot, which should bend to the side, and then slightly up, that is, in the form of a fishhook. At the end of it, with two screws, we fasten the blade from a pencil sharpener or just a sharply sharpened strip of metal. Now it is enough to catch an apple stalk in this slot, bring it to the blade, and the fruit will fall into the tube.

The third device is the most difficult to implement, but will last the longest. So you'll need a cut metal pipe, a washer or a circle of large diameter (about 3-4 centimeters) and a dozen metal bars of a centimeter section and up to half a meter long. We weld a washer or a metal circle to the end of the pipe (on the other, a stick will be inserted into it). Next, with equal steps, we weld the rods at a slight angle so that they diverge from the center upwards.

It will work from the side classical form janitor's brooms. The welding must be carried out very securely so that the rods can be slightly bent if necessary. Now we just hook the apple so that it is inside the structure, turn the device, and the fruit will come off. For any device, it is better to take not a long wooden pole, but a telescopic or a rod made up of several separate sections in order to adjust the length as needed.

The stores sell special nozzles for picking fruits, made in the form of a crown, facing up with teeth, to which a bag is attached from below.. They are quite reliable, but short-lived, since thin galvanized metal is usually used. In addition, the teeth can easily damage the fruits, so a large number of protruding parts on the fruit collector is undesirable. However, these devices are used small dacha, where there is no big harvests and you can work slowly.

Crown nozzle for harvesting fruit crops

If you don't feel like messing around, a quick apple picking net can be made from a regular (old) fishing landing net. At its farthest point from the handle, you need to make a bend so that you get the shape of a beak, it will replace the wedge-shaped slot in this device. Now it is enough to catch the apple and pull it so that it hits exactly in the net. You can repeat until the mesh is full.

On the eve of the autumn harvest, in addition to ideas for processing apples, an important task arises - how to harvest fruits in a quality manner. Someone out of habit picks up the fallen apples and gently shaking the tree continues simple manipulations. Such actions are relevant for the owners of a couple of small apple trees. A much more serious approach is required to collect a large number harvest. To do this, it will be useful to know what an apple picker is, types and tips on choosing a device.

Do not think that an apple picker is for lazy people. At a minimum, the use of fruit pickers saves a lot of time for summer residents, while maintaining the quality of apples at the highest level.

A device for collecting apple fruits can be made independently from improvised materials, or you can purchase a finished design in a specialized store. Before making any decision, it is worth considering all the pros and cons of the most popular types of fruit pickers.

Purchased apple pickers

The advantage of buying a fruit picker in a store is the availability and ability to choose the most convenient model and material.

Plastic "tulip"

The device is a tall glass with slots, made of dense plastic. Outwardly, the nozzle resembles an opened bud of a real tulip.

Principle of operation:

the fruit is placed in a “tulip” so that the stalk falls between the “petals” of the nozzle;
scroll the handle of the fruit picker around its axis;
the plucked fruit is placed in a basket.

The design is simple and convenient. Difficulties arise only with unripe apples or too strong fruit cuttings.

Collet puller

A fruit picker with a telescopic handle is one of the most popular models. The design has the ability to adjust the length of the pole if necessary. The tip of the device itself can be made of metal, plastic, and even have a knife for cutting cuttings. The puller operates by analogy with the "tulip". The fruits are captured by the nozzle and are torn off by turning the pole of the device. Some models are additionally equipped with a special bag, thanks to which it becomes possible to collect several apples at once without interrupting the process.

Wire fruit picker

The design is made of wire strings assembled in the form of a bowl. After grasping the fetus with a wire, the apple is plucked by turning the device around its axis. Further, the fruit is safely brought to the basket.

Picker with grab

The principle of operation is similar to previous models. The device differs only in an improved bowl. The device is like a metal grip of three "fingers". This design is able to grab not only a large fruit, but also smaller fruits.

There are also types of pullers with an additional fishing line for capturing an apple cutting. The stores provide options for mechanisms with a fixed length of the pole of the device, as well as models with telescopic handles.

We do it ourselves

An overview of the most common options for fruit collectors allows you to understand the principle of operation of the mechanism. So, having determined the best type of puller design for yourself, you can start manufacturing home device to pick fruit.

Collection of plastic bottles "tulip"

Necessary materials:

Plastic bottle for 1.5-2 liters;
A fishing line about three meters long;
Leg for the collection bowl (pole, pipe, etc.).

First you need to prepare the puller bowl itself. To do this, cut the plastic bottle with scissors from the side of the bottom, creating a bowl of the desired height. We make cuts around the perimeter of the container so that the design looks like a tulip bud.

In each "petal" we make small holes with an awl. It is desirable to make them closer to the top of the bowl. Next, we thread the fishing line through the holes made, and draw its ends through the neck of the bottle.

In the pole we make a through hole in the place where the bowl will be attached. We fix the bowl with the invader on the basis of the handle of our device. If it is not possible to make a hole, then it is better to glue the bowl to the pole with glue.

Through the holes on the holder we pass the ends of the fishing line. We securely fasten the short end of the fishing line, and leave the long end of such a length that it is convenient for it to compress and unclench the “petals”.

Collection from the bottle "bowl"

This is the most simple model in manufacturing. To create a bowl, you need to cut off the bottom of a 1.5 liter plastic bottle. Along the perimeter of the "bowl" we make shallow cuts with scissors and decorate the edge with sharp teeth. We make a through hole in the neck of the bottle.

At the end of the "holder" of the puller we make a through hole. We put the neck of the bottle on the pole. Through the prepared holes, we fasten the bowl on the holder with a nail or self-tapping screw.

Closed bottle extractor

Near the bottom of the plastic bottle, cut out a round side hole. From the side of the bottom we cut the cloves. Some summer residents recommend making a hole in the shape of a heart for convenience. Next, the bowl is put on the end of the pole and secured. This design allows you to shoot more than two fruits at a time.

With a can

This device is the strongest for removing fruits compared to plastic bottles.

We choose a large tin can, in the diameter of which a large apple can easily pass. On one side of the top, cut a shallow line with a knife. With the help of pliers, we push the slots in the shape of a wedge. On the opposite side, we make a couple of holes through which we fasten the jar to the pole with wire.

From a plastic pipe

To make the device, you need to take a pipe made of thin plastic with a wide diameter, which will allow you to skip a large apple. In the upper part of the pipe we make a hole in the form of the letter J. The tail of the letter should be directed upwards. We fasten the blade on the lower tail of the letter.

A hole is made in case the stem of the fruit is too hard.

We cut the lower end of the pipe in the form of teeth. We heat the teeth and bend, forming the bottom of the puller. We attach the structure to the pole using wire or self-tapping screws.

A fishing net will also serve as an excellent fruit picker. However, to remove apples with a hard handle, you will need to additionally equip the device with a blade or hook. For greater convenience, the net can be slightly bent at the base.

Experienced gardeners recommend using for fruit picking homemade pullers, as purchased models are short-lived. In addition, designs homemade are more durable and comfortable, as they are created taking into account personal needs.

The most popular fruit picker is a plastic bottle device. In this case, there is also a recommendation. Since the apple harvest is very unstable, the device sometimes has to be stored indoors. In disassembled form, it is much more convenient to do this.

To create a separate design of the fruit collector, it is recommended to screw the neck of the bottle to the cork, fixed to the pole with self-tapping screws or adhesive tape. However, you will have to “twist” the apples from the branch exclusively in a clockwise direction, otherwise the bowl will simply fall off.

The tin can remover can also be improved. To do this, cut out the bottom of the jar, and instead we fix a small linen bag. Thus, you can collect several apples at once. What is advantageous for closed structures is that they are also suitable for picking pears and plums.

How to make a fruit picker for apples with your own hands, see the following video.

Every year we suffer from the collection of apples. The trees have grown tall, and it is inconvenient to use an ordinary puller - a "glass" with slots: it is difficult to "drive" the stalk into the slot. Maybe there are some homemade designs that will help solve this problem. Otherwise, the harvest season will soon come, and I would not want to “poke” the fruits again with a clumsy puller.
Anastasia Valentinovna PETRAKOVSKAYA, Vitebsk region, Novopolotsk

I propose homemade design, which will help to easily remove the fruits from the highest height.

Features of the design of the fruit picker

The main parts of the puller are two plastic bottles and an aluminum ski pole. The design of the puller is shown in Figure 1.

Bottle 1 is selected depending on the size of the fruit, for example 1.5 or 2 liters. In this bottle, a cutout of half of the bottom and part of the side wall is made to let the fruit through. In the rest of the bottom, 2-3 narrow slots are made for capturing and breaking off the peduncle. The cork is firmly fixed (glued) to the neck and a round hole is cut out in it according to the diameter of the stick.

Bottle 2 is chosen to be smaller and its bottom is completely cut off. It has a removable stopper with a hole for passing a stick. Both bottles are sewn with a fishing line with a diameter of approximately 0.2 mm and fastened into a single rigid block. The bottle caps have holes according to the diameter of the ski pole.

The method of stitching bottles for the fruit picker

To stitch the bottles, you need to punch paired holes on both sides of the seam line with a hot awl. We bend a thin copper wire in half, twist the ends and make a “needle” in the form of a fishhook (Fig. 2).

With the help of this flexible “needle”, we put the fishing line through adjacent pairs of holes and connect the bottles into a single block. With this method of stitching, the hands will always be outside the bottles.

A block of two bottles is put on a ski pole, in which (after fitting) a hole is drilled and a pin is rigidly fixed (Fig. 3). The length of the pin should correspond to the diameter of the bottle neck and the inner diameter of the cork. On the neck of the bottle, 2 small diametrical cuts must be made to fix the block of bottles on the pin.

The illustration shows the cork removed from bottle 2. In this case, the bottle block is freely removed from the ski pole. When screwing the cork onto the neck of bottle 2, the pin firmly fixes the block of bottles on the stick.

The figure also shows a ring that prevents slipping along the stick and loss of the cork. The ring is made of tape or electrical tape.

The entire design of the puller is extremely light and easy to use.

Working principle of the apple picker

We introduce the fruit through the cutout into bottle 1 and tear it off with the side wall or bottom. 3-4 apples (pears) or 15-20 plums are placed in the puller.

We lower the entire puller to a horizontal position. At the same time, the remaining part of the bottom of the bottle 1 keeps the fruit from spilling out. Having unscrewed the cork 2, remove the bottle block from the stick, and pour the fruit through the cutout into a bucket or basket.

When picking fruit from the lower branches of the tree, the picker walks freely on the ground, and when picking from the upper branches of the tree, he climbs onto a ladder.