A small paper chair can be used as a decoration or toy in a homemade dollhouse. You can make this craft in 15–20 minutes.
To make it you only need a piece of paper or cardboard and a little patience.
Simple origami diagrams of a paper chair
A miniature chair is very easy to make using the origami technique. To do this, you will need a sheet of paper measuring 20x20 cm. Schemes for manufacturing can be found on thematic websites and downloaded from the Internet.
There are also many books on this technique. However, it is quite possible to experiment and create your own scheme. There are very simple circuit making a high chair, understandable to both adults and children.
Follow the strict sequence of actions:
REFERENCE! An ordinary chair can be easily made from a simple origami pattern in 5 minutes.
IMPORTANT! In the origami technique, strictly follow the recommended steps and try to make all folds as accurately as possible with the smallest error.
Stages of making a paper chair with your own hands.
Let's look at creating a paper chair step by step. This option is quite difficult to implement and may not work the first time.
Read and repeat the following steps carefully:
- Take a square piece of paper and fold it diagonally twice.
- At the same time, return the sheet to its original position each time.
It is important to make the diagonals visible. - Next you need to get a horizontal fold line. To do this, we also bend the sheet and immediately return it to its unbent form.
- We take the sides and connect them to each other so that we get a triangle.
- We bend the left edge and direct it to the center. This is a kind of mark at the bottom of the triangle.
- We direct the right tip towards the resulting mark, and then tilt it downwards.
- We bend the lower part twice so that the product is thinner.
- We bend a small corner in half and direct it to the left side.
- Next we straighten it. You need to insert some thin object into the corner.
- Then we straighten the corner and see a part that is very reminiscent of appearance leg of the future
high chair. - Next you should make another leg.
- In exactly the same way, we get a small but noticeable mark and bend the right side to the center. And we bend the left corner to the right side towards the mark and bend the corner back and down.
- Then the lower part must be bent in half.
- We repeat all the steps for the second leg in the same sequence. As a result of the work done, the chair already has two supports.
- Let's start making the third support.
- We tilt the second part of the right corner to the left.
- We tilt the bottom corner back up to the vertical line.
- We bend the left side towards the right, and point the bottom corner up. We open it, straighten it and get a small triangle-shaped figure.
- We bend it in half and get the third leg of the craft.
- The fourth support can be made using a similar and already proven technology as the previous one.
- Bend the sharp corners of each leg upward.
- We make the back of the product. To do this, bend the top of the workpiece back in the opposite direction.
A simple way to make a chair from cardboard
As a prototype, you can use an ordinary home chair or other furniture. It needs to be scaled to a miniature format and all the dimensions of the future craft should be written down.
Let's consider the main stages of creating a chair from cardboard:
- We draw the components of the future product on cardboard. These will be four strips for the legs of the chair, two parts of the seat, crossbars, and back.
- First, let's make the legs of the chair. They are made from a sheet of paper rolled into a tube.
- We connect the legs and the first part of the seat with glue.
- After the adhesive has dried, glue the legs to the second part of the seat.
- For greater strength and reliability, we add kind of partition bars to the chair legs. Everything is like on a real big chair. They make the craft more stable, which makes it possible to place your favorite doll on it.
- We connect the back and seat together.
There is an easier way to make furniture for a doll:
- To do this, a cardboard sheet must be connected in the shape of a cylinder with a diameter equal to the seat area.
- Next, you need to place the cylinder vertically and mark the height of the chair and its legs.
- Next, you need to cut out a piece of cardboard so that you get a kind of ottoman without legs.
So that the doll can sit on it, the empty space is filled with paper and the seat is glued. - The chair is ready.
- You can leave it like this, or you can paint or decorate it.
ATTENTION! You can use cardboard of different quality and texture. It can be multi-layered, matte or glossy.
conclusions
In this simple way, after practicing on a chair, you can make a whole set of things for dollhouse. To do this, you need inexpensive and readily available tools, such as cardboard, paper, scissors and glue. There are many proven simple schemes using the origam technique.
And such products will also be useful for adults as exclusive elements for the interior. You can use a more expensive one beautiful paper for making small crafts. So, unique miniatures look beautiful. For example, it could be a table and two chairs. You can place small dishes on them.
We hope this article was useful and will help you make a lot of interesting miniature things.
Children's games require a lot. In this case, you cannot do without it, which may require a lot. If the furniture in the toys does not fit in size, you can make it yourself. In particular, our master class offers step by step process making a chair out of paper.
To work you will need:
- square sheet of paper;
- scissors;
- scotch.
The final dimensions of the chair will depend on the size of the sheet. 
Stages of making a paper chair:
Fold the square in half. 
After this, the edges need to be folded towards the resulting midline. As a result, we got two more folds. 
The square sheet is divided into four parts, one of which needs to be cut off. We do this with scissors. 
Fold the resulting workpiece in half. 
We bend its right edge and form a triangular fold in the upper part. 
You also need to do the same with the left edge. 
We bend the right edge of our future chair towards the center. 
We do the same with the left edge. These will be the sides of the future high chair. 
We slightly unfold the edges and bend the central part upward. This is the seat of our chair. 
We give our blank the shape of a chair. Now all that remains is to secure the seat. To do this you will need scissors and transparent tape. We fix the seat from below (on both sides) with small strips of tape. Our paper chair is ready. 
The little owner of a dollhouse will definitely want to furnish it beautiful furniture and will ask her parents to help her with this. The house must have a sofa, table, bed, chairs and other pieces of furniture. Of course you can buy them. But you can easily make it yourself, using a minimum of funds.
Approximate Dimensions
Before you think about how to make a table for dolls yourself and from what material, you need to decide on the dimensions. You need to start from the height of the doll itself and the size of the house. The interior will look beautiful if all the furniture is approximately the same scale and style.
The easiest way to make all objects proportionally the same is to calculate the scale. You need to divide the average height of a person by the size of the doll. You will get a number by which you will subsequently need to divide all the real sizes of the furniture to get the doll sizes.
For example, the height of a doll is 20 cm. We divide the average height of a person 175 cm by 20 cm = 8.75. The actual dimensions of human furniture must be divided by this number to obtain the dimensions of doll furniture.
On average, dolls have a size from 7.5 to 15 cm. If the doll for which this or that piece of furniture is made fits these parameters, you can use the following sizes:
Furniture for dolls made from matchboxes
This is just a godsend for creating a dollhouse environment. You can create a huge number of pieces of furniture from them:
An excellent material for making a doll set is cardboard. It is very easy to cut and is glued with regular PVA or hot glue. From the old cardboard box you can make all the furniture in the house. The only drawback of cardboard- this is that without decoration and finishing on top with some kind of material, it does not look very beautiful.
Corrugated packaging cardboard will not last long, as it wrinkles quite quickly and loses its shape. It is better to use cardboard for scrapbooking or just thick cardboard.
Gluing a bed out of cardboard is quite simple. You need to cut the bed walls to the required size and connect them with glue. The back can be decorated with wrapping paper or decorated using decoupage technique.
You can make a bed without glue. The walls will be fixed using grooves cut in the walls.
Making furniture from paper
If it is not possible to buy ready-made doll furniture, you can make it from paper. How to make a chair out of paper so that it is strong and does not immediately wrinkle? Roll the paper into tubes! Craftsmen have long been weaving anything from newspaper tubes. Sets for dolls will be no exception. Weaving patterns can be found on the Internet. Such items will decorate the house and look very cozy. In addition, they will be quite durable if painted or coated with several layers of varnish.
For the manufacture of paper furniture you will need:
You need to roll thin tubes out of paper. This can be done using a knitting needle. They should dry well. Then the tubes need to be glued lengthwise using glue. It is better to use a hot gun, so the connection will be stronger and the paper will not get wet.
In this way, small blocks (walls) are glued together, which are then connected to each other. They are easy to cut into the desired pieces. For better fastening, you can use wire or thread.
Then shelves and doors are made in the same way.. The doors need to be secured with tape or wire.
The legs and arms are made from the same tubes, rolled into a roll. The edge needs to be glued with hot glue.
Plywood doll products
A doll's wardrobe for clothes can also be made from plywood. He will serve his owner for a very long time. You can connect the walls and shelves together with hot glue or PVA. A hanger bar can be made from a wooden skewer or a Chinese stick. Hangers are made from straightened paper clips.
The bed, table and chairs can also be made from this durable material. Some craftsmen even carve beautiful patterns on such furniture, imitating carved furniture. It looks very nice. The plywood needs to be painted or covered with fabric.
It is better to stuff the sofa with cotton wool or foam rubber so that it takes shape, and then cover it with fabric.
The table can be made as square, and round using a jigsaw. The legs will be wooden skewers or sticks. Chairs are made using the same principle.
Cardboard box furniture
From one TV box you can make all the furniture in the house. To create it you will need:
- The box itself.
- Double sided tape.
- Scissors.
- Regular wide tape.
- Glue gun or PVA glue.
- Materials for decoration.
All furniture must be cut out, cut into the necessary parts and glued together.
Next begins the real interesting process- finishing. Cardboard can be painted, covered with wallpaper or paper . On the front of the cabinet or dressing table, you should glue a piece of foil, imitating a mirror. You need to put a tablecloth on the table, and pillows on the sofa - this will add coziness.
Be sure to involve the child himself in the decorating process. This is a great opportunity to feel like an interior designer and show creative thinking. Anything can be used: small stones, shells, beads, rhinestones, stickers.
After finishing the design work, the arrangement of furniture in the house and filling it with details (vases, figurines) begins.
Of course, you need dishes in the kitchen. It can be cut out of cardboard, wood or molded from plasticine. How to make a bottle for dolls is a more complicated question. Here you can use bottles of drops for the eyes or nose, or ran out of perfume samples.
Cabinet made of wooden rulers
Another way to quickly create a doll closet. To make one cabinet you will need approximately six rulers. You will also need a jigsaw and PVA glue for the job..
Cut and sand the rulers to prevent splinters. Everything was glued with PVA glue. After the product has completely dried, it can be painted. For a beautiful, even color, you need to cover the cabinet first with a layer of white paint, and then with the desired color.
In the same way you can make tables, chairs, bedside tables and other furniture for dolls.
How to make furniture from clothespins
It is not necessary to use wooden ones; plastic clothespins are also used. They vary in size and color, but with wooden clothespins the furniture turns out more comfortable and beautiful.
To make a table or chair from clothespins, you need to separate them. Halves of clothespins are used, which are connected to each other. Connecting them in a circle, make a tabletop, legs can also be made from halves of clothespins.
The beauty of this material is that it can be easily attached to a clothespin the required form or cut off as much as needed. Some people make their own theater on clothespins. Templates can be found online.
Making furniture for dolls - pretty exciting process, which can involve the whole family. Dad can do the crafting, gluing, twisting, and preparing for framing. Mom and daughter will be happy to paint furniture, decorate it, sew tablecloths, pillows and bedspreads. This is a wonderful family activity that will delight your little princess.
Attention, TODAY only!
Modern children's goods stores have everything your heart desires - from simple blocks to complex airplane models. But sometimes a child needs something unusual, which can be difficult to match to the size of his dolls or animals. A child can make many things for his toys with his own hands with a little help from you. For example, you need a miniature amusement park that lacks...
When it comes to the most favorite childhood toys, most adults name a maximum of 2-3 pieces that they never let go of. Any modern child can have dozens of different toys. But from this number there will always be the most favorite ones. For some children, they are miniature toys that are produced by entire families: a family of bunnies, cats, or others...
Sometimes we are all too modest and at the right moment we do not dare to say the main words to our most beloved person. There is one day a year when such words are not only possible, but also necessary. It's February 14th - Valentine's Day. On this day, all lovers (and not only) exchange love messages - valentines. Traditionally, they are made in the shape of a heart, but your Valentine should...
What do children usually like to do at home? Play with toys in role-playing games, draw, sculpt from plasticine, make crafts and much more. All this together can be called a manifestation of creative abilities. One of the popular techniques for developing spatial thinking is origami. If you want your child to become a creative person, do not be lazy to spend your own or...
Not every adult can remember the last time they visited a zoo. But the child will not only remember, but also tell in detail who he saw there. For most children, the topic of animals is very close. Of course, every child has his own preferences - some like fish and hamsters, while others adore predators. If your family has a little animal lover, then invite her to make...
Giving gifts is no less pleasure than receiving them. At the same time, it is not at all necessary that the gift should be expensive. For example, you want to please a work colleague or a good friend, but you don’t know how. There is an option to do this simply and tastefully. Write good wishes and put it in an envelope, which should not be postal, but made with your own hands. IN..
People encounter manifestations of love throughout their lives. From birth, children feel the love of their parents, and when they become adults, they themselves surround their loved ones with care and reverent love. Valentine's Day is a good reason to give a piece of your love to everyone you care about. Perhaps the main symbol of love is the heart. Therefore, a small hand-made paper wreath of hearts...
It is rightly said that it is not the gift itself that is valued more, but the attention. We all want to take care of our loved ones, but we often look for special reasons to do so. Small surprises and gifts do not require special occasions at all; they can be given even every day. You can surprise your loved one by giving him a heart. It is easy to fold from paper using the origami technique. Is our..
Most often, the kindest and brightest memories are associated with childhood. Tell me, who in childhood did not sculpt from plasticine and clay, did not glue plastic models tanks and ships, or just didn’t fold a paper airplane? Creative activities still bring a lot of pleasure today. For example, the origami technique, which involves folding various paper figures, is popular. We..
Tatyana Titova
Purpose: for a game, layout, competition, gift.
Target: continue teaching children how to work with paper; learn to cut according to a pattern; color finished crafts; develop creativity and aesthetic taste.
Material: strips of paper measuring 5cmx15 and 6cmx15; scissors, felt-tip pens.
1. Organizational moment.
Children, last time we made little men for the collective work “Winter Fun”. The result was a beautiful collective composition. And today I propose to make chairs for our characters and other little people whom we will sit on chairs.
2. Sample demonstration. Look, kids, what funny toys You can make them out of paper with your own hands, which you can also play with.
2. Demonstration of a method for making a chair from thick printer paper.
What material is the chair made of? (from paper)
Review the sample pattern with the children.
How will we make a chair using a pattern? (cut along the solid lines, and bend along the dotted lines).
3. Demonstration of a method for making paper men.
What material is the man made of? (made of white paper).
Where do we start working? (first we cut it out, and then we bend it along the dotted lines).
The little people are very flexible: they can take different poses.
We color the finished crafts with felt-tip pens.
4. Independent productive activity of children.
5. Summary. Children, you did a great job. Come up with names for your characters and play with them.
Thank you for attention!
Publications on the topic:
Teachers: Svetlana Valerievna Gribanova, Natalia Vasilievna Cherednichenko Dear colleagues, we want to tell you about the competition that...
Abstract of the GCD on creativity - designing from paper “Little Frog” in the senior group Topic: “Little Frog” Summary of GCD on creativity (paper design) in senior group taking into account individual characteristics preschoolers.
Summary of productive activities with children 7 years old “Making board sports games” Educator Oksana Evgenievna Alekseeva, Sevastopol Program content: Educational: - Enrich children's knowledge about types of sports.
Conducted by: teacher Sidorova S. R. Implementation of the content of the program in educational areas: “Artistic and aesthetic development”, “Physical.
Lesson notes for the senior group “Paper Design” Integration of educational areas “Socio-communicative development”, “ Cognitive development», « Speech development" Types of children's activities:.
Construction in the second junior group “Table and chair for a bear” Construction Topic: “Table and chair for a bear” Continue to train children in building pieces of furniture and the ability to make the building stable.
