The technology of making a bastard sword. Making a wooden sword at home How to make a wooden sword

Many people strive to fulfill their childhood dreams. You can turn one of them into reality by learning how to make a sword. After all, who among us has not imagined himself as a hero of fairy tales or popular films with a luxurious blade in his hands? Making this fantasy come true is not difficult at all. You just need to collect necessary materials and tools and carve out some free time for work.

Want to learn how to make a sword with your own hands at home? First, decide for what purposes you need it. If you like to participate in reconstructions of knightly battles, a wooden blade will suit you. When organizing a children's party, crafts made from oblong balls will come in handy. And science fiction fans will appreciate the shining weapons of the Jedi.

Wooden sword

How to make a sword from wood? First, find suitable material and decide on the shape of your future weapon. After that, you can safely get down to business. Cut the board using a hacksaw, giving the product the required length.

After this, give the workpiece the shape you like and round all the corners. You should end up with an arc the size of which will be approximately three to five millimeters.

While working, pay attention Special attention on the direction in which you cut the wood. After all, how to make a sword against the fibers of the material? The answer is simple - no way. Move along them and make sure that the surface is perfectly smooth and does not form knots, unevenness or any cracks. This condition is the key to long service life of the product. If you don't do this, the blade will break very quickly.

Convenient and beautiful

As you shape the blade, start creating the handle as well. At this stage, it is determined how comfortable it will be to hold the sword in battle. Note! Under no circumstances should the holder be given a round shape! It is better to give preference to oval or rectangular.

This is the key to making the sword comfortable. After all, in practice you will use the weapon in two combat planes, and round handle will create unnecessary discomfort and may even cause injury. To make the blade even safer, make sure that there are no sharp or protruding fragments on the handle that, if in contact with the palm, could damage it.

How to do wooden sword original form? To do this, cut in advance using a hacksaw or electric jigsaw desired contours. Only after this can you proceed to surface treatment using a knife or plane. When you give it its final shape, make sure that the proportions are correct. Make the central part thicker and the tip thinner.

To give the product additional strength, coat it with epoxy resin. After finishing the honing and sanding, apply several layers of it to the surface. You can thin the final layer with paint. It will give the product completeness and make it more beautiful.

Nuances of work

How to make a wooden sword look like a combat sword? Using a guard made of rubber will help you in this matter. If you have little experience in fighting, make it large and round to better protect your hand during a fight. This part is fixed at the bottom of the blade at the place where the handle begins. You can secure it using wire covered with electrical tape.

At this stage of work, the level of blade balancing is determined. How to make a wooden sword more convenient in this regard? To do this, you will need lead weights, which must be hidden under a layer of winding. It is made using nylon threads, wet leather cords or ordinary fabric. These materials reduce the sliding of the palm on the surface to a minimum and add convenience to using the tool.

Now you know how to make a sword from wood, and you can treat yourself to a new toy at any time. This blade is more suitable for adults, while a less weighty weapon can bring a lot of joy to children. We will consider the process of its creation below.

Ball blade

How to make a sword from a ball? To do this, you need only two things: the material itself and a hand pump to inflate it.

Before starting work, you should know that to complete it you need to have manual dexterity and patience. Therefore, if you plan, for example, to make a lot of such tools for a children’s party, practice twisting them in advance. Also be prepared for unpleasant incidents when inflatable sticks burst in your hands, because not all of them have a sufficient level of strength and pliability.

Basic rules

How to make a sword from a ball? Remember the basic requirements for the workflow.

Step-by-step instruction

How to make a sword at home using balls? It's not difficult at all. You will spend about ten minutes making it. Follow the instructions - and you will definitely succeed.

Inflate the balloon using a pump. At the same time, it must be held large and index fingers. Tie it and bend it about 20 centimeters from the tip.
Roll the piece again to create a snake-like shape.
Find the center of the tube and gently, but firmly, press on all its parts.
Twist the toy a few more times and straighten it carefully. This way you will make a comfortable handle for the future blade. The long part of the tube will serve as the tip of the sword.

This completes the work on the craft. You can make as many of these toys as you like and arrange a wonderful pirate or knight party for your child. Children are guaranteed to be delighted with your crafts.

Turning into Jedi

Cult movie " star Wars" excites the minds of his fans around the world with the question of how to make a laser sword. For your fantasy to become a reality and for you to feel the power of a shining Jedi blade in your hands, you need to do some pretty simple work.

First, collect the materials needed to create the weapon. You will need:

Polycarbonate transparent or frosted tube at the tip of the sword;

Rolled polyethylene to diffuse light;

- "Oracal" to reflect the radiance;

Nickel plated furniture leg to make the handle;

Switch button;

Strong color diode (approximately three watts of power);

Holder for three batteries;

Resistor.

Work process

How to make a laser sword? First, measure desired length points and saw off the tube. Then decide on the parameters of the handle and use a jigsaw to shorten the furniture leg to the required size.

After this, insert the diode and a roll of polyethylene into the blade of the blade. Separately cut out a circle from oilcloth and place it in the upper part of the workpiece. In learning how to make a Jedi sword, an indispensable assistant The material will be "Oracal", which will serve as a light reflector. It needs to be secured inside the craft.

Now make a hole in the handle for the power button. A file will help you with this. Next, connect the resistor, battery holder and switch together and insert them into the handle. Attach a diode to them.

Final stage

Wrap the end of the polycarbonate tube with electrical tape (this will take a couple of rolls) until it barely fits into the handle. Glue a nut between the resulting layers, and make a hole in the handle for a bolt that will secure the blade.

Solder the tube with a cap, screw it to the handle, decorate the latter as your heart desires - and your Jedi blade is ready. You can safely go with him to the war against Darth Vader.

Despite the fact that in the modern world firearms are widely used, cold weapons are still used - in daggers and bayonet knives. This is where the official combat use of edged weapons ends. and daggers became part of historical and national costumes. Role players and reenactors fight with gusto, using wooden, plastic, automotive steel and other materials in their battles.

In almost every school of hand-to-hand combat you can find a direction in fighting with sticks and training swords. Because fencing develops body balance, orientation, movement speed and muscle flexibility. A person who knows how to fence with a steel sword can easily do the same with any stick.

What types of swords are there?

There are several types of swords. The simplest and easiest to make are straight, one-and-a-half and two-handed. They differ in weight and type of combat with them.

Direct or Slavic - the smallest and most convenient to handle with one hand. In the second hand they usually take a shield or another similar sword. The handle of such a weapon is designed for one hand. To select the size, take the workpiece in your hand - the tip of the blade should touch the ground.

The one and a half sword is an intermediate sword between straight and two-handed. A fight with this is carried out either with two hands, or with one and a small shield, so that you can always help the second hand. This type of sword is very common in hand-to-hand combat schools, as it allows you to develop the upper shoulder girdle and strengthen the joints.

The heaviest and longest, if you rest it on the ground, the handle should reach your chin. This can only be handled with two hands. In training, it is good for muscle development.

All swords, one way or another, develop coordination of movement, especially if the battle is against several opponents.

Making a wooden sword: what material to choose?

A wooden sword can be made from the material different types. Some advise taking dead wood or parts of boards from birch, hazel, oak, and aspen. This is suitable if you need wooden swords for training so that you don’t mind breaking them. If you are preparing for role-playing game and you want to have an impressive, durable sword with which you can show off, then you should choose a fresh one young tree. The thickness depends on the type of sword. You can take thicker wood, but then you need to choose the core as the strongest part.

Be careful when choosing the material; wooden swords with knots, rot and wood bugs do not last long. The selected workpiece must first be soaked until completely saturated with moisture, and then dried very slowly so that the wood does not crack. If you follow the wood drying technology, you will get a very durable and lightweight sword.

Sword at home: how to make?

A wooden sword, despite the pliability of the material, will require patience and skill in working with. Remove the bark from the workpiece with a plane, removing irregularities along the way and making the barrel straighter. Plane the trunk on both sides so that the blade is from 3 cm to 0.5 cm. There is no point in sharpening the wood, given the strength of the material. All sharp edges must be removed and the blade made oval. You should not make the handle round, otherwise during the fight the sword will spin in your hand; it is better to choose a rectangle with rounded edges as a shape. Between the blade and the handle, carve out a place for the guard. The guard can be made of wood, metal or nylon. We make two identical symmetrical parts and secure them with electrical tape.

The handle is also wrapped with electrical tape or wet leather. The balance of the sword should be at a distance of one or two palms from the guard to the blade; if this point could not be observed during the manufacture of the sword, then when winding the handle, lead inserts can be hidden under the winding. The tree itself should be strengthened with impregnating compounds, like epoxy resin. Your weapon will last you longer and will not be afraid of moisture. Wooden swords can also be made beautiful. Therefore, at the last stage all that remains is to decorate the sword to your liking.

Are you still wondering how to make a wooden sword? This is a simple product. But to improve your skill, you can start with a knife or a boat.

Scandinavian type

Round shields are called Scandinavian, although they were used everywhere in Slavic squads, since round shields easy to make. Their diameter was usually from 65 to 90 cm. The Scandinavians made them from ash, oak, and maple. Those made from linden were especially valued for their light weight. The thickness of such shields was from 6 to 12 mm. The boards were bound with steel plates, and they themselves were painted in various colors and decorated. Sometimes a finished and decorated product became an expensive gift.

Making a wooden shield

Based on the preferences of Scandinavians and modern materials, the simplest thing is to make a shield from plywood 6 mm thick. Using the markings, cut out a circle of the diameter you need. Cut a hole in the center for the fist. Using a wood knife or paint, you can imitate boards. For durability and best view cover the shield with stain.

Depending on the size of your hand, make a metal umbon to cover the hole. The shield handle is attached to two strips, which are attached to the entire diameter of the product. The handle is made of oak, birch or ash. They are fastened with nails, and the protruding parts are removed with pliers and riveted.

At the next stage, the shield is glued with leather or burlap. After this, the umbon is mounted. The shield is framed either with metal or leather. The metal is from 1 to 1.5 mm thick, and the leather when forging should be thicker, from 5 mm.

For ease of wearing, you need to make a leather strap. This addition will allow you to carry the shield on your shoulder or throw it over your back over your head.

The final stage - decoration - is left to your discretion. The shield was often depicted with a coat of arms, a unit sign, or simply a drawing aimed at intimidating the enemy.

Training with a wooden sword

In hand-to-hand combat schools, sword fighting training is often organized during classes. This perfectly develops coordination, reaction, and a sense of distance. And the painfulness of the blows allows you to believe in the reality of the battle. Wooden swords and shields are excellent weapons for such training. There are separate schools of sword fighting where they use heavy defense, and the fight is more like a show. But there is a drawback to such training: the fighter, getting used to strong armor, begins to expose himself to blows, and in the case of street stick fighting, this leads to injury.

But try to remove the protection, every blow leaves bruises. After a few lessons, students begin to dodge blows. When fighting a stronger opponent, they learn not to take the blow harshly, but to redirect it. In combat with several opponents, they develop coordination, speed of movement, thinking and intuition. Such skills will also be useful in real life, and not just in the ring.

A wooden sword is cheaper and easier to make, so it is used for training. With its help, you can practice most movements, but when switching to other materials, you have to learn a lot again, since the weight changes greatly. Some trainers use very heavy and clumsy wooden swords so that students develop muscles, and the movements are practiced on metal.

Additional protection

When looking at photos of wooden swords and making your own, do not forget about protection. In the heat of a training battle, it’s easy to lose your composure and start hitting with full force. To avoid fractures, it is worth using additional protection arms, legs and head. The first defense is your own sword, then the sword guard. Fingers, wrists, and forearms are at risk. In mass battles, everything else falls into the risk zone. Therefore, it is recommended to protect your hands with gloves, and your wrists and forearms with sleeves. Cover the body with a thick leather jacket or quilt. You should put a thick knitted cap on your head; in case of a miss, it will soften and distribute the blow. To protect your teeth, do not forget about the mouth guard. Legs from the foot to the knee should be covered with high boots or boots with knee pads.

Reenactors

The movement of role-players and re-enactors is popular in our world. Some use plots from fantasy books for their games, others reconstruct battles from our history. If the former can get away with not playing a very active role and not participating in mass battles, then the latter are better off having fencing skills, good physical fitness and dexterity, and also being able to fight in formation.

It’s always easier to buy a sword in a special workshop; it’s not difficult to find one among roleplayers, but if you decide to make a wooden sword with your own hands, then be patient.

To do real sword, you need to dedicate many years of training. The best swordsmiths in the world will not give up their secrets easily, and even high-quality wooden practice swords, such as bokken (wooden swords for aikido training) and shinai (bamboo sword for kendo training), require a lot of patience and professionalism. to create them. However, anyone who has a little free time and a few the right tools, can make a toy sword for sparring with friends, or to go on adventures with your son or daughter. Read the steps below to learn how to make a sword yourself.

Steps

Wooden toy sword

Draw a sword on paper. More precisely, draw the outlines of the sword. Use a ruler to make it straight and be as creative as possible when coming up with the design you want. It doesn't have to be perfect. This will be the main stencil for your sword.

To make a long sword using this method, you will need a longer piece of paper. You can use a roll of thin, brown paper, or buy large sheets of paper from an office supply store.

Cut out and copy the stencil. Carefully cut out the sword stencil, and then place it on a board (which will be no more than 2.5cm wide) of the desired wood you will be using. Copy the stencil onto the board, and then copy the hilt (hilt and guard) two more times.
- The hilt needs to be thicker than the blade, so you need to cut three pieces of wood for the hilt and glue them together.
Cut the tree. Using a saw, cut out the three pieces of wood that you drew the outline on - two pieces of the hilt and the whole sword. The cuts will most likely be rough, but that's okay. Make sure you cut a wider piece than a narrower piece, as a wide piece can be trimmed, but a narrow piece can be difficult to fix.

Mix the epoxy glue and glue the pieces together. The next step requires taking a strong epoxy glue and stirring it until it becomes effective. Mix it up on a piece of paper to make it easier to clean up when you're done. Once it's active, apply an even layer to one side of each hilt piece, and glue them to the center piece, one piece on each side.
- Once the pieces are glued together, wait at least 10 minutes for the epoxy glue to dry completely.
- Try to keep both pieces as even as possible, but it's okay if they aren't perfect.
Polish the sword. Start with the hilt. Use fine-grit sandpaper to buff out any rough edges and smooth out all three pieces. If you want, you can use a special tool to speed up the process. Once the hilt is smooth, use sandpaper to bevel each side of the blade to make it "sharp."

Check the hilt and make any final adjustments. Make sure that the hilt of the sword is not too thick and that it is comfortable to hold; if it is thick, polish on both sides to make the handle thinner. Place the sword on the graphic surface and check that both sides are as level as possible. Polish the uneven parts until your sword is as symmetrical as possible.

Decorate the sword. Start by decorating it. To begin, you must apply a coat of gray paint using a sprayer. Once the first layer is dry you can add metallic paint to make the blade shiny, or decorate the blade blue or red, or create a lightsaber. Once the paint is dry, make the handle. Duct tape is a good choice, as is glued-on fabric. Alternatively, you can wrap the handle with a leather cord. Finally, using any desired decorative elements, add the finishing touches.
- If you cover the hilt when you spray paint the first coat of paint on the blade, you can leave it natural, wooden look. Another way is to paint the hilt gold and the blade silver.
- You can decorate the guard and head of the hilt by gluing fake gems onto them.
- If you like, once you're done with the spray paint, add details using fine brushes and acrylic paint.
boffer
1. Start with a long piece PVC pipes. The pipe should be rigid, but elastic when shaken. A pipe with a diameter of 2.5 to 3.5 cm is perfect. Using a saw, cut the pipe to the overall length of the blade and handle. Decide if you want the sword to be two-handed or one-handed.
  
  Wrap with foam rubber. Cut a piece of closed cell foam (usually sold in cylindrical shape, and has a hole for a pipe in the middle) so that its length is equal to the length of the blade and handle, plus a few centimeters. Place the foam on the PVC pipe.
  
  Add guard. If you like, you can add a guard by putting a four-way pipe fitting on the hilt end of the main piece of PVC pipe. Cut two short pieces of PVC pipe the same length. Put a piece on each open side fitting to create the guard. Once you are satisfied with its width and position, use cement adhesive to secure each piece in place.
  
  Add more foam. If you want to make the sword safer, add a small piece of closed cell foam to the edges of the hilt and the base of the guard. This way you have created the head of the handle.
  
  Take some duct tape. Start wrapping the handle with duct tape. Cut it once you get to the base of the hilt and make it flat. Next, wrap a thick layer of duct tape around the base of each piece of foam, securing it to the pipe. Add bands of duct tape wrapped around the foam to further secure it. Finally, wrap the entire foam blade with duct tape.
  - The end of the foam rubber should be several centimeters longer than the pipe to make the sword safer; you can wrap this soft part of the sword with duct tape, covering the hole in the top.
2. Wrap up and have fun. Completely wrap any other piece of foam you may have added with duct tape. The adhesive tape gives the sword a shiny blade appearance and protects it from different elements. Once your weapon is ready, you can use it to have fun with your friends. This weapon is soft enough to prevent serious injury, so go for it!
Katana made from a metal ruler
1. Screw the handle. Remove the construction tape from the handle, and polish with a fine-grit sandpaper To get rid of splinters, then wrap it in either duct tape or medical tape, or wrap it in leather cord to make the handle softer. Your new Katana is ready! The elasticity of the ruler blade will prevent it from breaking when you hit different objects with it.
  - Although this sword has a square tip and a flat blade, it can still cause pain. Be careful when you play with him. Only hit inanimate objects, like training stuffed animals.
Warnings
- Even a toy sword can cause injury if used incorrectly. Supervise children when they play with toy swords, and be careful when using them yourself. An attack with a wooden sword is still an attack.
- Use your tools with care, and remember to use safety equipment when making any of the above swords.

A wooden sword can be made at home (Fig. 1). Birch boards, edge boards from fences, or disassembled door frames size 50x50 cm. Material - hazel, birch, dead oak - can be found in a forest or forest plantation, select a straight fragment and plan it.

Rice. 1.

Wooden sword.

First, try making a regular straight wooden sword. You can do it in several ways. The first one is more labor-intensive, but the product will be more durable. The sword is made from a tree trunk or block. Find a hazel tree, or better yet an oak tree, with a small diameter - 3-6 cm (which one exactly depends on the type of sword). The thinner it is, the easier it will be to process (Fig. 2). Decide on the type of sword. It depends on the length of the trunk or bar.

Rice. 2.

Sword stick.

Typical Slavic straight sword

If you hold a straight sword with your hand down by the hilt, the tip of the blade should touch the ground. Such swords usually have a handle the size of one free grip of the hand. These proportions must be strictly observed.

Bastard sword

The grip of such a sword and a half is approximately equal to the distance for a free grip of one and a half hands. The length of the bar is average between Slavic and two-handed.

Two-handed sword

It has a bar slightly shorter than your height. These two-handed swords have a large hilt with a spacious two-handed grip. Use a plane to remove the bark, trying to make the tree trunk as straight as possible and removing unnecessary knots. Then start “forging” the sword itself. Plane the trunk on both sides so that the blade becomes flatter and more even.

You will get something in the form of a bar or board with a thickness of at least 0.5 cm and no more than 3 cm. Grind off the sharp edges, if any, and make the sword slightly oval. Next, you need to decide what the handle of the sword will be, as well as one of the most important elements - the guard. The handle can be round or oval. It should fit the sword, but keep in mind that the handle needs to be wrapped with something else. After you have sharpened the blade and handle, be sure to file or cut out a place for attaching the guard on both sides with a knife between the handle and blade (Fig. 3).

Rice. 3.

Making a sword (dimensions in mm):

1- handle; 2- a recess between the blade and the handle for securing the guard; 3-blade.

Once you've finished working on the blade, sand it very carefully. TO at this moment you need to take it very seriously - this will protect you from unwanted splinters on your hands. The first part is ready. Now grab the guard. You also need to choose a material for it. The guard can be made from wood or iron, but it is not so easy. Best material, from which you can cut a guard of any shape - nylon (antifreeze cans, for example).

It looks like soft plastic and can be cut well with scissors, which allows you to cut out the most intricate shapes. Double-edged swords usually have flat guards. Therefore, we cut out two identical shapes from nylon - be it a straight guard, in the shape of a month or wings (Fig. 4). Next, we place two identical guards in both spaces, which are located between the blade and the handle, and rewind them with something, for example, insulating tape, until they are securely fastened (Fig. 5).

Rice. 4.

Guards to the sword.

Rice. 5.

Fastening the guard.

The handle can be wrapped in different ways: use electrical tape, or any other material that will also have to be wrapped with electrical tape to secure it. The winding made of leather, riveted and secured, turns out beautiful. The handle can be covered with foil, painted to look like metal, and the sword can be decorated using various rivets, chains, feathers or ballpoint pens, apply paintings, signs, drawings on the blade with ink. The sword itself can be wrapped in gauze. It's done like this. We apply it to the sword and cut a strip of gauze of the required width along the length of the blade.

We coat one side of the blade with PVA glue; after drying, it does not lose elasticity and has almost no color. Let it dry and apply a second layer. Carefully apply gauze and smooth out all wrinkles on the surface that we are gluing. Let dry and turn over. The glue must dry completely to a solid state. At favorable conditions this takes from 4 to 8 hours in the winter and 3 hours in the summer in the sun. We repeat the operation on the other side (Fig. 6). To make a sword, following the second method, you will need following materials: round stick, aluminum or plastic tube with an internal diameter slightly larger than the diameter of the stick, several meters of rubber watering hose, lead fishing sinkers, wide transparent electrical tape, black electrical tape, aluminum or other shiny tape, foam rubber, azikonym or installer tightening rings.

Rice. 6. Finished product.

The first stage is to make the blade

Let's try to make a blade. We cut two pieces of hose shorter than the desired length of the blade, and attach the hose to the stick on both sides. We first secure it with several small wallpaper nails, and wrap it on top with wide electrical tape. At the end of the blade we attach a triangular piece of foam rubber. Then cover the blade with glitter tape. We apply the tape in long strips lengthwise - first on the ribs, and then on the plane. In this case, the blade will look uniform, without twists.

The second stage is making the handle and guard

We make the handle and guard. For the handle we take a tube. It must be wrapped with some material. To do this, you can use rope, cord, wire, electrical tape or strips of leather. In the latter case, you will get a very original and stylish sword. To prevent the skin from slipping, we wrap a guitar string.

A very good winding would be a winding for a tennis racket handle. Then you need to attach a guard to the end of the handle. To do this, you can use azikonym or installer rings and a thick, thick layer of electrical tape. After securing the guard, wrap it with electrical tape. Now you can insert the blade into the handle. If it goes in too easily, wrap several layers of electrical tape so that the blade fits tightly. Final stage- secure the blade with the handle with several turns of electrical tape.

There are two ways to balance a sword

The first and easiest way to balance a sword is to attach some lead weights to the end of the sword. The second way to balance a sword is more difficult. First, find the center of gravity of the sword and mark it. Measure the distance from the center of gravity to the tip and to the location of the desired center of gravity. Then weigh the sword on a precision scale.

Proceed with the resulting figure as follows: divide it in half, and then divide the resulting half by the distance from the center of gravity to the tip - you will get the approximate weight of one centimeter of the blade. Multiply the resulting figure by the distance between the current center of gravity and the desired point. This will give you the weight that needs to be added to the end of the handle to move the center of gravity to exactly the right spot. To do this, attach lead weights totaling this weight to the end of the handle.

Many people strive to fulfill their childhood dreams. You can turn one of them into reality by learning how to make a sword. After all, who among us has not imagined himself as a hero of fairy tales or popular films with a luxurious blade in his hands? Making this fantasy come true is not difficult at all. You just need to collect the necessary materials and tools and carve out some of your free time to work.

Wooden sword

How to make a sword from wood? First, find a suitable material and decide on the shape of your future weapon. After that, you can safely get down to business. Cut the board using a hacksaw, giving the product the required length.

After this, give the workpiece the shape you like and round all the corners. You should end up with an arc the size of which will be approximately three to five millimeters.

As you work, pay special attention to the direction in which you cut the wood. After all, how to make a sword against the fibers of the material? The answer is simple - no way. Move along them and make sure that the surface is perfectly smooth and does not form knots, unevenness or any cracks. This condition is the key to long service life of the product. If you don't do this, the blade will break very quickly.

Convenient and beautiful

This is the key to making the sword comfortable. After all, in practice, you will use the weapon in two combat planes, and the round handle will create unnecessary discomfort and may even cause injury. To make the blade even safer, make sure that there are no sharp or protruding fragments on the handle that, if in contact with the palm, could damage it.

How to make a wooden sword of an original shape? To do this, cut out the desired contours in advance using a hacksaw or electric jigsaw. Only after this can you proceed to surface treatment using a knife or plane. When you give it its final shape, make sure that the proportions are correct. Make the central part thicker and the tip thinner.

Nuances of work

Ball blade

How to make a sword from a ball? To do this, you need only two things: the material itself and a hand pump to inflate it.

Basic rules

How to make a sword from a ball? Remember the basic requirements for the workflow.

Step-by-step instruction

How to make a sword at home using balls? It's not difficult at all. You will spend about ten minutes making it. Follow the instructions - and you will definitely succeed.

Inflate the balloon using a pump. In this case, it must be held with the thumb and forefinger. Tie it and bend it about 20 centimeters from the tip.
Roll the piece again to create a snake-like shape.
Find the center of the tube and gently, but firmly, press on all its parts.
Twist the toy a few more times and straighten it carefully. This way you will make a comfortable handle for the future blade. The long part of the tube will serve as the tip of the sword.

Turning into Jedi

The cult film “Star Wars” excites the minds of its fans around the world with the question of how to make a laser sword. For your fantasy to become a reality and for you to feel the power of a shining Jedi blade in your hands, you need to do some pretty simple work.

First, collect the materials needed to create the weapon. You will need:

Polycarbonate transparent or frosted tube at the tip of the sword;

Rolled polyethylene to diffuse light;

- "Oracal" to reflect the radiance;

Nickel plated furniture leg to make the handle;

Switch button;

Strong color diode (approximately three watts of power);

Holder for three batteries;

Resistor.

Work process

How to make a laser sword? To begin, measure the desired length of the tip and saw off the tube. Then decide on the parameters of the handle and use a jigsaw to shorten the furniture leg to the required size.

After this, insert the diode and a roll of polyethylene into the blade of the blade. Separately cut out a circle from oilcloth and place it in the upper part of the workpiece. In learning how to make a Jedi sword, the Oracal material will be an indispensable assistant, which will serve as a light reflector. It needs to be secured inside the craft.

Final stage

Solder the tube with a cap, screw it to the handle, decorate the latter as your heart desires - and your Jedi blade is ready. You can safely go with him to the war against Darth Vader.